Science and Technology Government Departments Closing in 0 days TDR #35190469

Tender For Assembly For Reflection And Transmission Measurements Of Ceramics In Visible-Infrared Spectral Region

Issued by Government Departments · trombay, Maharashtra
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Dec 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
trombay → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Assembly For Reflection And Transmission Measurements Of Ceramics In Visible-Infrared Spectral Region Supply, Installation And Warranty Of Assembly For Reflection And Transmission Measurements Of Ceramics In Visible-Infrared Spectral Region , “Assembly For Reflection And Transmission Measurements Of Ceramics In Visible-Infrared Spectral Region” The System Should Be Standalone Compact System To Measure Transmission And Reflection Of Visible-Infrared Radiation Of Ceramics Pellets, Quantitative Estimation Of Attenuation. The System Should Have Appropriate Light Source, Detector, Optical Fibers, Sample Mount And Necessary Software For Data Recording And Analysis. 1 Light Source Tungsten Halogen Source, 360-2000 Nm Or Wider, 10, 000 Hrs Or More, 2800 K I. Wavelength Range: 360Nm - 2.4?M Or Greater Ii. Source: Long Lifetime Tungsten Halogen Iii. Nominal Bulb Power: 4.75 W Or Higher Iv. Typical Output Power: 4.7 Mw Or Higher V. Shutter: No Vi. Fiber Connector: Sma 905 Vii. Integrated Cuvette Holder: No Viii. Power Requirements: 12 Vdc 2 Detector Wavelength Range: 350Nm - 1?M Or More. Optical Resolution: 1.34 Nm Fwhm ( Typical ) Integration Time: 3.8Ms - 10S Dark Noise: 50 Rms Counts Dynamic Range: 1300:1 For A Single Acquisition 8.5 X 10^7 ( System ) Signal To Noise Ratio: 300:1 ( Full Signal ) Detector Pixels:3648 Or More Detector: Linear Silicon Ccd Array Entrance Slit: 25 ?M Detector Collection Lens: No Electronics: A / D Resolution:16 Bit Or More Connectors: Usb High Density 40 Pin Jae Dd4 Connector Inputs / Outputs: 8 X User Programmable Gpios Trigger Modes: 4 Modes Or More Power Consumption: 250 Ma @ 5 Vdc Physical Dimensions: 89.1 Mm X 63.3 Mm X 35 Mm Or Smaller Weight: < 300 G 3 Probe For Reflection Geometry I. Wavelength Range: 400Nm - 2.1?M Or Greater Ii. Fiber Core Size: 200 ?M Or Greater Iii. Length: 2 M Or Longer Iv. Jacket: Silicone-Coated Steel Monocoil V. Probe Ferrule Diameter: 6.35 Mm ( 1 / 4? ) Or Larger Visible-Nir Reflection / Backscatter Probe 4 Probe For Transmission Measurements Uv-Visible Fiber- 2 Nos I. Wavelength Range: 300Nm - 1.1?M Or Greater Ii. Fiber Core Size: 400 ?M Or Larger Iii. Length: 2 M Or Larger Jacket: Silicone-Coated Steel Monocoil Complete Details In Annexure.

BOQ

Item Details: Assembly for Reflection and Transmission measurements of ceramics in Visible-IR spectral region
Sl. No. Item Description
1“Assembly for Reflection and Transmission measurements of ceramics in Visible-Infrared spectral region”The system should be standalone compact system to measure transmission and reflection of Visible-Infrared radiation of ceramics pellets, quantitative estimation of attenuation. The system should have appropriate light source, detector, optical fibers, sample mount and necessary software for data recording and analysis. 1 Light Source Tungsten Halogen Source, 360-2000 nm or wider, 10,000 hrs or more, 2800 Ki. Wavelength Range: 360nm - 2.4µm or greaterii. Source: Long Lifetime Tungsten Halogeniii. Nominal Bulb Power: 4.75 W or higheriv. Typical Output Power: 4.7 mW or higherv. Shutter: Novi. Fiber Connector: SMA 905vii. Integrated Cuvette Holder: Noviii. Power Requirements: 12 VDC2 Detector Wavelength Range: 350nm - 1µm or more.Optical Resolution: 1.34 nm FWHM (typical)Integration Time: 3.8ms - 10sDark Noise: 50 RMS countsDynamic Range: 1300:1 for a single acquisition8.5 x 10^7 (system)Signal to Noise Ratio: 300:1 (full signal)Detector Pixels:3648 or moreDetector: linear silicon CCD arrayEntrance slit: 25 µmDetector Collection Lens: NoElectronics: A/D Resolution:16 bit or moreConnectors: USB high density 40 pin JAE DD4 connectorInputs/Outputs: 8 x user programmable GPIOsTrigger Modes: 4 modes or morePower Consumption: 250 mA @ 5 VDCPhysical Dimensions: 89.1 mm x 63.3 mm x 35 mm or smallerWeight: < 300 g3 Probe for Reflection geometry i. Wavelength Range: 400nm - 2.1µm or greaterii. Fiber Core Size: 200 µm or greateriii. Length: 2 m or longeriv. Jacket: Silicone-coated steel monocoilv. Probe Ferrule Diameter: 6.35 mm (1/4?) or largerVisible-NIR Reflection/Backscatter Probe4 Probe for transmission measurements UV-Visible Fiber- 2 nosi. Wavelength Range: 300nm - 1.1µm or greaterii. Fiber Core Size: 400 µm or largeriii. Length: 2 m or largerJacket: Silicone-coated steel monocoilComplete details in annexure.

AI Tender Summary

OUR REF NO 35190469
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 29-12-2022
Authority
Authority Name Directorate Of Purchase And Stores
Work Description Assembly For Reflection And Transmission Measurements Of Ceramics In Visible-Infrared Spectral Region Supply, Installation And Warranty Of Assembly For Reflection And Transmission Measurements Of Ceramics In Visible-Infrared Spectral Region , “Assembly For Reflection And Transmission Measurements Of Ceramics In Visible-Infrared Spectral Region” The System Should Be Standalone Compact System To Measure Transmission And Reflection Of Visible-Infrared Radiation Of Ceramics Pellets, Quantitative Estimation Of Attenuation. The System Should Have Appropriate Light Source, Detector, Optical Fibers, Sample Mount And Necessary Software For Data Recording And Analysis. 1 Light Source Tungsten Halogen Source, 360-2000 Nm Or Wider, 10, 000 Hrs Or More, 2800 K I. Wavelength Range: 360Nm - 2.4?M Or Greater Ii. Source: Long Lifetime Tungsten Halogen Iii. Nominal Bulb Power: 4.75 W Or Higher Iv. Typical Output Power: 4.7 Mw Or Higher V. Shutter: No Vi. Fiber Connector: Sma 905 Vii. Integrated Cuvette Holder: No Viii. Power Requirements: 12 Vdc 2 Detector Wavelength Range: 350Nm - 1?M Or More. Optical Resolution: 1.34 Nm Fwhm ( Typical ) Integration Time: 3.8Ms - 10S Dark Noise: 50 Rms Counts Dynamic Range: 1300:1 For A Single Acquisition 8.5 X 10^7 ( System ) Signal To Noise Ratio: 300:1 ( Full Signal ) Detector Pixels:3648 Or More Detector: Linear Silicon Ccd Array Entrance Slit: 25 ?M Detector Collection Lens: No Electronics: A / D Resolution:16 Bit Or More Connectors: Usb High Density 40 Pin Jae Dd4 Connector Inputs / Outputs: 8 X User Programmable Gpios Trigger Modes: 4 Modes Or More Power Consumption: 250 Ma @ 5 Vdc Physical Dimensions: 89.1 Mm X 63.3 Mm X 35 Mm Or Smaller Weight: < 300 G 3 Probe For Reflection Geometry I. Wavelength Range: 400Nm - 2.1?M Or Greater Ii. Fiber Core Size: 200 ?M Or Greater Iii. Length: 2 M Or Longer Iv. Jacket: Silicone-Coated Steel Monocoil V. Probe Ferrule Diameter: 6.35 Mm ( 1 / 4? ) Or Larger Visible-Nir Reflection / Backscatter Probe 4 Probe For Transmission Measurements Uv-Visible Fiber- 2 Nos I. Wavelength Range: 300Nm - 1.1?M Or Greater Ii. Fiber Core Size: 400 ?M Or Larger Iii. Length: 2 M Or Larger Jacket: Silicone-Coated Steel Monocoil Complete Details In Annexure.
Basic Detail
Tender No DPS/CPU/04/D2/5344
Bidding Type Tender
Location
City trombay
State Maharashtra
Key Dates
Publish Date 08 Dec 2022
Submission Date 29 Dec 2022
Open Date 30 Dec 2022
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD Ref. Documents
Exemption Not Available
Document List
60320cb4-d861-4c3e-b83b-13acb02f897c.html
BOQ_765443.xls
DECLARATION-FORMS-B.rar
NIT_CHECKLIST.pdf
NIT_COMMERCIAL_TERMS.pdf
spec.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Dec 08, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 29, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Dec 30, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

60320cb4-d861-4c3e-b83b-13acb02f897c.html

xls

BOQ_765443.xls

rar

DECLARATION-FORMS-B.rar

pdf

NIT_CHECKLIST.pdf

pdf

NIT_COMMERCIAL_TERMS.pdf

pdf

spec.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders