Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-12-2022 | date Exte | Date | 19-12-2022 |
| 2 | 16-12-2022 | Due Date Extended (16-12-2022) | Admin Corrigendum Date Extend | 17-12-2022 |
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means (Hydraulic Excavator) over areas exceeding 30cm and up to 1.50Mtr in depth 1.5 mtr in width as well as 10 sqm on plan)Including disposal of excavated earth upto 1Mtr from cutting edge, disposed earth to be leveled and neatly dressed in: |
| 2 | All kinds of soil |
| 3 | Soft Rock |
| 4 | Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size and all sort of carriagecomplete |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size including all sort of carriage complete. |
| 7 | Centering, shuttering including strutting propping etc and removal of formwork for: |
| 8 | Foundations, footings, bases of columns etc. for mass concrete |
| 9 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 10 | Columns, pillars, piers, abutments, posts and struts. |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Hot rolled deformed bars |
| 12 | Extra for laying reinforced cement concrete in or under foul position. |
| 13 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 14 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) Including all sort of carriage |
| 15 | Masonry with Precast Cement blocks of required size, upto floor five level made from cement concrete of mix 1:3;6 ( 1 cement :3 Coarse sand : 6 Stone aggregate of 12 mm nominal size in cement mortar 1;6 9 1 Cement : 6 Coarse sand) |
| 16 | Making plinth protection with common burnt clay bricks of class designation 7.5 laid on edge in cement mortar 1:6 (1 cement : 6 coarse sand) with 12 mm thick bed of cement mortar 1:6 (1 cement : 6 coarse sand) over 75 mm bed of dry brick aggregate 40mm nominal size rammed, consolidated and grouted with fine sand. The top of bricks pointed with cement mortar 1:3 (1cement: 3 fine sand) and curing complete |
| 17 | Providing and supplying of acoustic fabric panelling ( Make-Anutone/Armstrong)with squre edges made of wood wool board/fibre glass substrate of minimum 25 mm thickness wrapped on the front side with an acoustically transparent and classified foe fire reaction of minimum class B-s1,d1 as per EN13501, fabric with approved conbination of colour,size.The fabric panelling shall be having a minimum sound absorption level of 0.90 NRC to be affixed to wall using panel impalera/alumionium section,Gi channel studs, accessories as recommended by manufacture along with 2mm thick pvc sheet on existing brick/rcc walls complete in allo respect as per the direction of engineer in charge. the rate includes complete job comprising fabric, wood wool board, frame work supported on substrate wall ,accessories complete. |
| 18 | Providing and fixing channelled wooden slat wallpanelling (Make-Anutone/Armstrong) of perforated panels of minimum thickness of 15mm , standrd length & width of 2400mm, 125mm or as per site, made of a high density fibre board with minimum NRC value of 0.55,minimum density of 800 Kg/M3 density substrate with a laminated facing/wood veneer as per the approved shade/species & finish and a melamine balancing layer on the reverse side. The boards shall have a perforation pattern perforation of 2 mm & width of minimum 14mm of visible panel each. The panels shall provide a fire reaction of class of 1 as perpart 7 of Bs 476. The panels shall be \"tongue-& grooved or interlocking\" with each other for intermediate fixing & suitable approved coloure powdeerr coated aluminium beading/moulding at ends, top as per site requirement.The back of the perforated panel shall have sound absorbing non-woven acoustical fleece. The panels shall be mounted on aluminium splines/channels using clips-section of appropriate size as per recomendation br manufacturer & Engineer-in -Charge. 2mm thick PVc sheets Shall be fixed on walls paior to fixing of panels. Suitable powder coated aluminium profiles shall be fixed atends, of panelling and also at top where panelling is ofmid height/sill levels etc. The work shall be complete in all respects as per the direction of engineer in charge. |
| 19 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):2nd class kail wood |
| 20 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :Kiln seasoned and chemically treated hollock wood |
| 21 | Providing and fixing factory made 43mm thick solid core flush door shutter confirming to IS 2202 (Part-1) of Greenply or approved equivalent make.The shutter shall be manufactured with exterior quility synthetic adhesive shall be made up of 35 mm thick flush door shutter with4 mm thickteak veneer lamination on both sides. The edges of shutter on allfour sidesshall be provided with 35 x12 mm thick teakwood beading(concealed) fixed by using exteroir quility synthetic adhensive, headless GI nails, screws each shutter shall be providedwith 300 x300 mm size vision panel at required location with 6 mm thickclear glass. the shutter shall be of approved brand and manufacture and finished with melamine polish in approved brand and manufacture and finished with melamine polish in approved shade, colour and design. Necessary rabate shall be provided for all double leaf shutters. the shutter shall be provided with stainless steel butt hinges of monimum size 125 x75 x3 mm ( 4 hinges per leaf) all complete as perthe direction of site enginer. The rate shallinclude cost of 43 mm thick factory made shutter,ss hinges ,rebate,teakwood beading, vision panel with 6mm clear glass. Cost of polishing and other hard ware will be paid separately. |
| 22 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of minimum size 100 x75 x2.50mmwith necessary screws |
| 23 | Providing and fixing glazed shutters for doors,Windows andand clerestorey windows using 4mm thick float glass panes including isi markeds s.s pressed butt hinges bright fionished or requried size with necessary screws. Secondclass kail wood 35mm |
| 24 | Providing and fixing of traditional Ladakhi singlesided Shingstag of height 2 feet in 2nd class kail wood as per drawing complete in all respects (except polishing, cement concrete coping, fasteners which to be paid separately) including cost of transportation, labour, wood, wastage, taxes, profits etc as per directions of Engineer- in-charge |
| 25 | Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters.(Area of opening for glass panes excluding portion inside rebate shall be measured)9.12.1 5.0mm thick instead of 4 mm thick |
| 26 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:a) 2nd class kail wood i) 50x12 mm |
| 27 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30×10×15 cm 1:3:6 mix ( 1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 28 | Providing and fixing ISI marked stainless steel tower bolt with necessary screws etc complete.a)200x10 mm |
| 29 | Providing and fixing stainless steel casement stays (straight peg (type) with necessary screws etc. completea)200 mm weighing not less than 240 gms.each |
| 30 | Providing and fixing stainless steel 300 mm long D-handles of 19 mm dia with screws etc. of Godrej or approved equivalent make complete :a) Satin finish SS handles for flush door shutters of 35mm to 43 mm thick |
| 31 | Providing and fixing of stainless steel 300 mm long aldrop along with necessary crown,screws, labour cost, transportation, profits etc complete in all respects as per direction of Engineer-in-charge |
| 32 | Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer, (having brand logo with IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete: |
| 33 | Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete welded |
| 34 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. |
| 35 | Steel work welded in built up sections/framed work, including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 36 | A) In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. |
| 37 | b)In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 38 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey match the shade of the slab, including rubbing, polishing and curing Vcomplete with base of cement mortar 1:4 (1 cement : 4 coarse sand)(The Kota stone slabs shall be of premium grade and shall be of uniform shade) |
| 39 | Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete.(The Kota stone slabs shall be of premium grade and shall be of uniform shade) |
| 40 | Extra for pre finished nosing in treads of steps of kota stone/ sand stone Slab |
| 41 | 38mm thick wood block flooring of first class teak wood laid over25mm thick leveling layer of cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 10mm nominal size) to be paid separately coated, with a thin layer of hot bitumen (blown type) @ 2.45 kg per sqm, including fixing blocks in position after dipping in hot bitumen (blown type) upto half depth, planed, levelled smooth and finished complete. |
| 42 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) With double charge vitrified tiles. a)Size of tile 600×600 mm |
| 43 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours andshades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. With double charge vitrified tiles.a) Size of tile 600×600 mm |
| 44 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 pa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required |
| 45 | Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 ma steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 micronsusing self drilling/ self tapping screws complete : |
| 46 | Ridge plian (500-600mm) |
| 47 | Flashing/Aprons.(upto 600mm) |
| 48 | Providing and fixing plained eaves boarding.2nd class kail wood 300x40 mm (nominal size) |
| 49 | 12mm Cement plaster of mix:1:4 (1 cement : 4 fine sand) |
| 50 | 18mm Cement plaster in two coats under layer 12mm thick cement plaster 1: 5 (1 cement: 5 coarse sand) finished with a top layer 6mm thick cement plaster 1:6 (1 cement:6 sand) |
| 51 | Finishing walls with acrylic smooth exterior paint of required shade OnNew work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 52 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 53 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work |
| 54 | French spirit/Melamine polishing two or more coats on new works including a coat of wood filler. The melamine polish shall be of approved shade and finish |
| 55 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2mm thick+ |
| 56 | Road Work And Waterproofing |
| 57 | Consolidation of subgrade with power road roller of 8 to 12 tonne capacity including making good the undulations etc. with earth or quarry spoils etc. and rerolling the subgrade. |
| 58 | Providing, laying and making kerb channel 30cm wide and 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth etc. complete as per direction of Engineer-incharge. |
| 59 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge. |
| 60 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 61 | Providing and laying tactile tile (for vision impaired persons as per (standards) of size 300×300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours land shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 l1cement: 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. |
| 62 | Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size underdeck on ceiling surface, complying with ISO4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 (measured as per IS 3346), compressive strength of 350 kPa listed as per ASTM D 1621, density of34-36 kg/cum as per ASTM D 1622, water absorptions < 1% by volumeas per ASTM D 2842, oxygen index of 24.1 to 28.1 listed as per ASTM D 2863, cell size 0.4 mm of dia(max) as per ASTM D 3576. Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the direction of Engineer-in-Charge. |
| 63 | Providing and fixing mineral fibre false ceiling tiles at all heights ofsize 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance > 85%,Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per(BS 476 pt - 6 &7)in true horizontal level suspended on interlockingTGrid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15×32 mm of length 3000 mm, cross T of size 15×32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised @80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85×25×2 mm, spaced at 1200 mm centre to centre along main \"T\". The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24×24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic raw plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge With 16 mm thick bevelled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) |
| 64 | With 16 mm thick bevelled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) |
| 65 | With 20 mm thick bevelled tegular mineral fibre false ceiling tile(NRC 0.7) |
| 66 | INTERNAL ELECTRCAL INSTALATION WORK |
| 67 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2X1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed heavy duty PVC conduit ISI Mark, with modular switch, modular plate, Blanking Plate if equired suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.Group C (One point controlled by one switch) |
| 68 | Wiring for group controlled (looped) light point/fan point/exhausi t fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required Group C ( Two point controlled by One switch) |
| 69 | Circuit wiring for power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed 2mm thick Heavy duty PVC conduit ISI Mark alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 70 | Circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, single corecable in surface/ recessed heavy duty PVC conduit ISI Mark as required |
| 71 | a)2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire (For Light ckt.) |
| 72 | b)2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (For Computer points + Light Plugs etc.) |
| 73 | c)2X10 sq.mm +1X6 sq.mm earth wire (For UPS DBs ckt.).) |
| 74 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 75 | a)25mm |
| 76 | b)32mm |
| 77 | Supply elrction testing and commisining of Internet socket RJ-45 outlet including cost of GI Box two modular, modular plate and cover in front, connection as required and complete the job in all respect. |
| 78 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 79 | Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket ouflet and 15/16 amps modular switch, connection etc. as required. |
| 80 | Supplying and drawing of UP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required(FOR INTERNET & INTERCOM). |
| 81 | Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modulai socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). |
| 82 | Supplying and fixing following way, single phase and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc as required (But without MCB/RCC/Isolator 12way, Double door(For UPS DB) |
| 83 | Supplying and fixing following way, horizontal type three phase and neutral, sheer steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way (4 + 12), Double door |
| 84 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required.Single pole |
| 85 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps |
| 86 | Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps |
| 87 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps |
| 88 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required 63 amps |
| 89 | Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A \"C\" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required |
| 90 | Providing and fixing M. V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. |
| 91 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.150 mm width X 50 mm depth X 1.6 mm thickness |
| 92 | EARTHING |
| 93 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 94 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 95 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thickincluding accessories, and providing masonry enclosure with C.I. cover plate having locking arrangement and watering pipe of 2.7metre long etc. with charcoal/ coke and salt as required. |
| 96 | Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 97 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe earth electrode including connection with G.. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 98 | vProviding and laying earth connection from earth electrode with 6 SWG dia G..I Wire in 15 mm dia G.. pipe from earth electrode including connection with G.I. THIMBLE excavtion and re-filling as required. |
| 99 | Froviding and fixing 25 mm X 5 mm copper strip on surface orin recess for connections etc. as required |
| 100 | Providing and fixing 25 mm X 5 mm GI strio on surface or in recess fo connections etc. as required |
| 101 | Providing and fixing 6 SWG dia Gil. wire on surface or in recess for loop earthing as required |
| 102 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable |
| 103 | LIGHTNING CONDUCTOR |
| 104 | Providing and fixing of lightning conductor finial. made of 25 mm dia 300 mm long. G.. tube, having single prong at top, with 85 mm dia 6 mm thick G.. base plate including holes etc. complete as required |
| 105 | Fixing of lightning conductor finial (single prong) with base plate including holes etc. complete as required |
| 106 | Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting sweating and soldering etc as required. |
| 107 | Providing and fixing G.. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run) |
| 108 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run |
| 109 | Providing and fixing testing joint. made of 20 mm X 3 mm thick G.I. strip. 125 mm long, with 4 nos. of G.I. bolts. nuts. chuck nuts and spring washers etc. complete |
| 110 | Providing and laying G.I. tape 32 mm X 6 mm from earth [electrode directly in ground as required. |
| 111 | MV CABLE LAYING |
| 112 | [Laying of one number PVC insulated and PVC sheathed I XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required Upto 35 sq. Mm |
| 113 | Above 185 sq. mm and upto 400 sq. Mm |
| 114 | Laying and fixing of one number PVC insulated and PVC sheath ed / XLPE power cable of 1.1 KV grade of following size on wall surface as required |
| 115 | Upto 35 sq. mm (clamped with 1mm thick saddle). |
| 116 | Above 35 sq. Mm AND upto 95sq.mm (clamped with 25x3mm MS flat clamp) |
| 117 | Above 185 sq. mm and upto 400 sa mm (clamped with 403mm MS flat clamo) |
| 118 | MV CABLE JOINTING & END TERMINATION |
| 119 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 120 | (a)2 X 10 sq. mm (19mm) |
| 121 | b)3½ X 50 sq. mm (35mm) |
| 122 | c)3½ X 240 sq. mm (62mm) |
| 123 | d)4 X 16 sq. mm (28mm). |
| 124 | Supply and Erection of Rubber Mat of size 2m x 1m x 16 mm thick suitable for 11 KV (ISI mark) complete in all aspect |
| 125 | Supply and fixing in position approved shock treatment chart written Hindi nd local language. These charts shall be framed in wooden trame and covered with clear glass |
| 126 | Supply and fixing in position the best quality danger notice boards of approved shape and size as required by the local electrial Inspecting Authority wirtten in English, Hindi and local language. (For 440 Volt & 11000 Volts) |
| 127 | Supply and enameled first aId boxOF approved make standard medicine complete as per Indian Electricity Act |
| 128 | MAIN L.T PANEL |
| 129 | Supply. installation, testing and commissioning of powder coated of Siemens grey of approved colour compartmentlised cubicle MV Panel fabricated out Of 14/16 SWG thick CRCA sheet steel suitable for operation on 415 volts, 50Hz, 3Phase 4 wire AC supply . The panel shalll be outdoor free standing, fl001 mounting, dust and vermin proof type, adegate size cable alley with front operated rotary handles for MCCB\"s complete with gland plates, lifting hooks, ventillating louvers, busbars, Inter connections, earthing, labelling as per specification and drawings, suitable for termination of cables as per single line diagram including. supply and fixing of following switchgear and accessories complete as required. A separate earth copper bus bar of size 25mm X 5mm to be provided throughout the length of the panel. complete. The Panel should be extendable type. (Make of panel, Tricolite, Ambit, International Switchgear, Amco, Kalyani switchgear)|). Having CPRI test certificate breaking capacit)70 KA and ISO 9001-2008 INCOME FEEDER,MCCB 400A. FP 36KA=1NO ,Spreader Link=1NO ,Rotary Handle=1NO ,[Voltmeter with VSS=1NO ,Ammeter with ASS=1N0 ,RYB Indication Lamp LED=3NO 06Amp. ,Control SP MCB=3NO ,400/5Amp. 15 VA CL-1 Current Transformer =3NO ,CT Short Link =3NO ,OUTGOING FEEDER ,MCCB 200A,TP 36KA,FOR EMERGENCTY\Y=1NO ,SPREADER LINK =1NO ,ROTARY HANDLE=1NO, MCCD250A,TP36KA,FOR 115KW ,HEATING SYSTEM=1NO , SPREADER LINK =1NO, ROTARY HANDLE=1NO , MCCB 63A,TP 25KAFOR SOLAR WATER HEATER BACKUP =1NO ,SPREADER LINK =1NO ,ROTARY HANDLE=1NO ,MCCB 200A,TP 36KA,FOR SPARE=1NO ,ROTARY HANDLE=1NO ,SPREADER LINK =1NO ,DUMMY =1NO ,ENCLOUSRE & ACCESSORIES ,Trabrication in 1.62 O CRCA sneet Powder coaung in siemens Grav snade 75x40mm. Channel Base Frame, Cable Entry will be Top & Bottom Suitable for Cable Lock, Rubber Gasket, hardware etc.,BUS BAR & HARDWARE ,500A. Aluminium Main Bus Bar, 4 Pole Load wise Sub Feeder Bus Bar Colou Coated Heat Shrink Bus Bar sleave Nut-Bolt, Washer , Hardware etc.,WIRING & ACCESSORIES ,Power & Control Wiring will be (ISI 1100V) Flame Retardent Low Smoke PVC Single Core Copper Wire Copper Luggs, PVC Sleeve, ferrules, Numbers, Hardware & Labour etc.Spreader Link =1NO , Rotary Handle =1NO ,MCB DB 63A FOR UPS 10KVA=1NO ,Dummy=2NO ,ENCLOUSRE & ACCESSORIES , Fabrication in 1.6/2.0.CRCA Sheet Powder Coating in Siemens Gray Shade, 75×40mm.Channel Base Frame, Cable Entry will be Top & Bottom Suitable for Cable ,Lock, Rubber Gasket, hardware etc. ,BUS BAR & HARDWARE ,250A. Aluminium Main Bus Bar, Load wise Sub Feeder Bus Bar Colour Coated Heat Shrink Bus Bar sleave Nut-Bolt, Washer ,Hardware etc ,WIRING & ACCESSORIES |
| 130 | EMERGENCY PANEL |
| 131 | Supply, installation, testing and commissioning of powder coated of Siemens grey of approved colour compartmentlised cubicle MV Panel fabricated out of 14/16 SWG thick CRCA sheet steel suitable for operation on 415 volts, 50Hz, Phase 4 wire AC supply. The panel shall be outdoor free standing, floor mounting, dust and vermin proof type, adeqate size cable alley with front operated rotary handles for MCCB\"s complete with gland plates, lifting hooks, ventillating lovers, busbars, Inter connections, earthing, labelling electrical and Mechanical interlocking as per specification and drawings, suitable for termination of cables as per single line diagram including. supply and fixing of following switchgear and accessories complete as required. A separate earth copper bus bar of size 25mm X 5mm be provided throughout the length of the panel. complete. The Panel should be extendable type. (Make of panel, Tricolite, Ambit, International Switchgear, Amco, Kalyani switchgear)I) Having CPRI test certificate breaking capacity 70 KA and ISO 9001-2008.INCOMER FEEDER ,MCCB 200A,FB 36KA=1NO ,Spreader Link =1NO , Rotary Handle =1NO ,Change Over Switch 200A. FP =1NO ,Voltmeter with VSS =1NO ,Ammeter with ASS=1NO, RYB Indication Lamp LED =6NO ,06Amp. Control SP MCB=6N0 ,200/5Amp. 15 VA CL-1 Current Transformer =3NO ,CT Short Link =3NO ,OUTGOING FEEDER ,MCCB 63A. TP 25KA. For Toilet Block=1N0 , Spreader Link =1NO ,Rotary Handle =1NO ,MCCB 63A. TP 25KA. For DB-1 MPH =1NO ,Spreader Link =1NO , Rotary Handle =1NO ,MCCB 63A. TP 25KA. For DB-2 MPH 1NO, Spreader Link =1NO , Rotary Handle =1NO ,MCCB 100A. TP 25KA. For Fire Fighting Panel =1NO ,Spreader Link =1NO ,Rotary Handle =1NO ,MCCB 63A. TP 25KA. For Water Lifting Pump,Spreader Link =1NO, Rotary Handle =1NO ,MCCB 63A. ?? 25KA. For Spare=1NO ,Spreader Link =1NO ,. Rotary Handle =1NO ,MCCB 100A. TP 25KA. For Spare =1NO |
| 132 | TECHNCAL SPECIFICATION FOR 10 KV ONLINE FOR 30 MIN BACKUP (IP IN-IP OUT) |
| 133 | Supply of 10KVA/ 9KW True Online, DSP Controlled online UPS with 1 phaseAC input and 1 phase AC output with 30 min backup with 12V SMF batteries Bank with Rack ( min. VAH required =10,080VAH) The UPS should be with IGBT Based Rectifier and IGBT based Inverter and with LCD/LED display for monitoring of its status along with same OEM Make inbuilt Galvanic Isolation Transformer at input side only.UPS should have following Features:UPS power factor: Input PF should be 0.99 AND output PF not less than 0.9 Efficiency: overall efficiency (up to 93%) without Isolation ,Communication interface RS232/USB port and optional SNMP compatibility for remote Monitoring, THDi <5% , overload : 125% for 10 minutes. 150% for 1 minutes and Noise level <1= 55dB, operating temp : 0-45 degree C , Audible Alarm Mains Failure/Low battery /UPS Warning /Overload/Fault & Bypass Mode CERTIFICATIONS & Standard: ISO-9001-14001 Certified Company, BIS /CE certified product. Compatibility with DG Genset, Built in Automaticas well as Manual Bypass Switch, Warranty: 2 Years on UPS as well as on Batteries, Battery MakeExide/Amaron-Quanta/ PanasonicMake Only Preferred/Approved Brand: APC-Schneider /Emerson - Vertiv /Legrand-Numeric |
| 134 | XLPE/ PVC INSULATED ARMOURED CABLES : |
| 135 | Supply. testing and commissioning of aluminium / copper conductor XLPE P. V.C. insulated armoured and served cable to be laid as per requirement at the site of work including all petty material required to complete the job. upto entire satisfaction of engineer in charge ,SupplyTesting and Commisioning of aluminium conductor XLPE insulated armoured and served cable as per requirement at the site Workable at minimum TEMPERATURE LEH of work upto entire satisfaction of the Eingeer-in-charge.(Make Polycab / KEI / Havells 10sq.mm 2Core |
| 136 | Supply Testing and Commisioning of aluminium conductor XLPE insulated armoured and served cable as per requirement at the site Workable at minimum TEMPERATURE LEH of work upto entire satisfaction of the Eingeer-in-charge.(Make Polycab / KEI / Havells 16sq.mm 4Core |
| 137 | Supply Installation Testing and Commisioning of aluminium conductor XLPE insulated armoured and served cable as per requirement at the site Workable at minimum TEMPERATURE LEH of work upto entire satisfaction of the Eingeer-in-charge. :- (Make Polycab / KEI / Havells 50q.mm 3.5Core |
| 138 | Supply Testing and Commisioning of aluminium conductor XLPE. insulated armoured and served cable as per requirement at the site Workable at minimum TEMPERATURE EH of work upto entire satisfaction of the Eingeer-in-charge (Make Polycab / KEI / Havells 240sq.mm 3.5Core |
| 139 | Supply Testing and Commisioning of Copper XLPE. insulated armoured and served cable as per requirement at the site Workable at TEMPERATURE LEH of work upto entire satisfaction of the Eingeer-in-charge.(Make Polycab / KEI / Havells 10sq.mm 2Core |
| 140 | FANS & FIXTURES |
| 141 | Supply, installation, testing and commissioning of IP20 20 W +/-1W DALI Dimmable COB LED Recess Mounted Downlighter with minimum system lumen efficacy of 105 Im/W with Pressure Die cast aluminium hosuing and clear glass cover having P.F.>0.95 with THD<10% CRI 80s. The LED shall be tested with [MBO-08 standard with Useful life of 50000 Hrs at L70. The LEDs used in the luminaire shall have CCT of ANSI Bin 4000 K with CRI of minimum 80. The Input voltage range shall be 150V to 270V. including cost of all petty materials required to complete the job in all respect. Wipro Cat. No LD56-251-060-40 Equivalent in Philips & Trilux, |
| 142 | Supply, installation, testing and commissioning of IP20 led fixture 12 W +/- 1 W LED Recess Mounted Downlighter Round Shape with minimum system lumen efficacy of 120 Im/W with Pressure Die cast Aluminium Housing and P.F.>0.95 with THD<10% _CRI 80.The LED shall be tested with LM80-08 standard with Useful life of 50000 Hrs at L70. The LEDs used in the luminaire shall have CCT of ANSI Bin 5700 K with CRI of minimum 80. The Input voltage range shall be 150V to 270V Fixture have Surge Protection 2KV Driver, including cost of all petty materials required to complete the job in all respect. Wipro Cat. No : LD06-151-XXX-57-Equivalent IN Philips & Triux. |
| 143 | Supply, installation, testing and commissioning of Led fixture 600mmX600mm 33 W+/- 1W Recess Mounted Decorative fiture having Light engine and diffuser only on the edges and hollow in between with Drop Down HET PMMA diffuser with DALI Dimmable having minimum system lumen efficacy of 100lm/W with extruded aluminium housing with P.F.>0.95 with THD<10% CRI 80. The LED shall be tested with LM80-08 standard with Useful life of 50000 Hrs at L70. The LEDs used in the luminaire shall have CCT from 5700 K with CRI of minimum 80. including cost of all petty materials required to complete the job in all respect. Wipro Cat. No:LM29-451-XXX-57. or Equivalent in Philips & Trilux |
| 144 | Supply, installation, testing and commissioning of IP20 Led fixture 20 W+/- 1W with Surface Mounted 4 Feet Batten Fixture with P.F. >0.95 with THD<10% CRI 80, Surge Protection 2 Kv. The LED shall be tested with LM80-08 standard with Useful life of 50000 Hrs at L70. The LEDs used in the luminaire shall have CCT of ANSI Bin 6500 K with CRI of minimum 80. The Input voltage range shall be 150 to 270V. including cost of all petty materials required to complete the job in all respect. Wipro Cat. No LL20-221-XXX-65NE3. or Equivalent in Philips & Trilux. |
| 145 | Supply, installation, testing and commissioning of Supply of 45 W, Pole mounted (P66 Street Light with System efficacy of 110 Im/W. LED Street Light shall be made up of Die cast Aluminium Housing for better heat decapitation. L70 life of 50000 Hrs. The LEDs used in Street Light should be with CCT of 5700 K and CRI of Minimum 70. Input voltage range of 150V to 270V (nominal rated voltage - 240V) with 4 KV surge protection. Power factor greater than 0.95 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire. including cost of all petty materials required to complete the job in all respect.Wipro Cat. Code: LR06-611-XXX-57-XX or Equivalent in Philips & Trilux. |
| 146 | Supply, installation, testing and commissioning of DIN Rail mounted DALI power supply unit which provides required power supply to DALI Dimming system upto 250 MA. The Power supply unit is fully Dali-compatible and connected to the main supply and Touch panel system for dimming purposes to save the Energy when in less use. Complete the job in all respect. MAKE:- Wipro Helvar Cat. No:402 / equivalent in Dynalite Philips /Trilux : Live Link Platinum |
| 147 | Supply, installation, testing and commissioning of Wall Mounted Touch Panel Switch to control DALI Enabled Luminaires for Dimming and scenes craetions, and ON/OFF provision complete in all respect. Wipro Helvar 191 GW+ 290 W or Equivalent in Philips Dynalite or Trilux Live Link Platium. |
| 148 | Supply. installation, testing and commissioning of 25 W LED All-in-One Solar Streetlight, 40W High Efficiency Monocrystalline Silicon Panel having system efficacy of 150 LPW. 24Ah LiFeP04 Battery with higher life of >2000 cycles. At Full Power 210Hrs autonomy and at Saving mode 230Hrs autonomy. Automatic Dusk to Dawn feature. Integral PIR sensor for motion detection. MPT charge controller with 90-96% efficiency. System voltage: 12V. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. Luminaire shall be with IP65 protection. . The LEDs used should be with CCT of 4000-6000 K and CRI >70. including cost of all petty materials required to complete the job in all respect Wipro Model No. LR19-461-XXX-57-XX or Equivalent in Philips & Trilux.(Excluding pole) |
| 149 | Supply and erection of G.I. Pipe (A-Class) Single arm bracket of suitable length to give a total overhang at a tentative angle of 100/105°, the bracket should be fixed on the existing surface/ wall with 2nos, MS flat clamp 25mm × 5mm, 30cm long and 4nos.Single Arm Bracket 1 metre Long G.I. Pipe 40mm Dia. |
| 150 | Supply and erection of Galvanized Steel Octagonal Pole (Sheet thickness 3mm) designed to withstand wind speed 169km/ hour of suitable length (Raw material confiming to IS-5986 (FE-510), BSEN-10025S-355J or ASTM-572A (GR-50)) and thickness of galvanizatio ,Galvanized Octagonal Pole Overall Length 6 metre (Sheet thickness 3mm), Top dia.(A/F) 70mm and bottom dia. (A/F) 130mm, Foundation size below G/L550mm x 550mm x 1200mm, 4Nos. Foundation Bolts size 20mm dia.Length>600mm WITH Base Plate Dimensions 220mm. |
| 151 | Supplying, Installation, testing and commissioning of A C. CEILING FAN 48° (1200MM) STAR 220 5 Star Rating Including cost of petty material required to complete the job in all respect. ( Make : HAVELLS, CROMPTON, anchar (panasonic). |
| 152 | SupplySupply. Installation, Testing and Commissioning and erection of wall fan complete with shutter (ISI mark) including cost of petty material required to complete the job in all respect. (Make Crompton, Havells or Armonard) |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
