|
| 1 | CIVIL WORK:- - Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.2.7.1 All kinds of soil : |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kind of soil |
| 3 | Soiling stone in horizontal including cost of stone |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundation,Plinth Beam, footing bases of column |
| 7 | Foundations, footings, bases of columns etc. for mass concrete. |
| 8 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 9 | Column, pillar ,piers abutments ,post and struts |
| 10 | Suspended floors, roofs, landings, balconies and access platforms. |
| 11 | Edge of slab |
| 12 | Stairs(Excluding landing) except spiral staircase |
| 13 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 14 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, column, pillars, piers, abutments, posts and struts etc. upy floor five level excluding cost of centering, shuttering, finishing and reinforcement: (1:1.5:3) 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). |
| 15 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 16 | Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. (Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 17 | Providing and layingstabilized mud block wall having two leaves interlocked with ties at 900mm Horizontally and 450 mm Vertically, leaving air cavity of 3\" between two wall leaves. |
| 18 | Providing and layingcement blocks masonry in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 Cement : 4 coarse sand ) and curing complete. |
| 19 | WALL PLASTER - EXTERIORCEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand) |
| 20 | WALL PLASTER - INTERIORCEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand) |
| 21 | 6mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 22 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 23 | Exterior:- Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.13.88.1 1 mm thick |
| 24 | Interior:- Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.13.88.1 1 mm thick |
| 25 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 26 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 27 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.10.26.1 M.S. tube - 1\"Outer Dia @4kg/m Total Legth of Railing = 100 m Total Length Of ms pipe =a) Horizontal segment = 100 x 3 rows = 300 m b)Vertical Segment (@1.5m interval) = 67 x 0.81= 54 Total kg= (300+54)*2= 708 |
| 28 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. Complete.50mm thick with 20 mm nominal size stone aggregate. |
| 29 | VITRIFIED FLOOR TILESProviding and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete11.52.2 Size of tile 600x600 mm |
| 30 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) : |
| 31 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood |
| 32 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second Class kail wood |
| 33 | Providing and Fixing UPVC Window with casement /casement cum fixed glazed with DGU ( Double Glazed Unit)All Complete job. |
| 34 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 35 | Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992with necessary screws etc. complete : |
| 36 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barreltype) with necessary screws etc complete. |
| 37 | Applying priming coat:13.58.1 With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 38 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 39 | Providing and fixing Wooden ShingstakAll Job Complete.(All Floors included) |
| 40 | Supplying and installing 3D Acrylic sign board with necessary lighting and accessories as approvedy Engineer-In - Charge |
| 41 | Septic Tank:- Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil : |
| 42 | SOLING stone in horizontal including cost of stone |
| 43 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 44 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundation,Plinth Beam, footing bases of column |
| 45 | Suspended floor, roofs, landings, balconies and access platforms |
| 46 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 47 | Dry random rubble masonry with hard stone in foundation and plinth with bone stone |
| 48 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 49 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. (Thermo-Mechanically treated bars.) |
| 50 | Providing and layingcement blocks masonry in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 Cement : 4 coarse sand ) and curing complete. |
| 51 | WALL PLASTER - INTERIORCEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand) |
| 52 | 20mm cement plaster finished with a floating coat of neat cement of mix :13.9.1 1 : 3 ( 1 cement : 3 fine sand) |
| 53 | Providing and fixing PVC soil waste and vent pipes.100mm dia |
| 54 | 75 mm dia |
| 55 | Cast iron manhole cover 2\"x2\" |
| 56 | PARKING: Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:.All kinds of soil : |
| 57 | Soiling : Dumping of Stone Including Cost of stone |
| 58 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 59 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with :1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
| 60 | Coursed rubble masonry with hard stone (first or second sort) insuperstructure above plinth level and upto floor five level including curing complete with: |
| 61 | Providing and laying 60mm thick factory made cement concrete interlocking paver block M-30 grade made by block making machine with strong vibratory compaction of approved size and design/shape laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand ,filling the joints with coarse sand etc all complete as per direction of engineer . |
| 62 | Providing and fixing Precast Concrete Kerb Stone blocks of size 300x300x100mm as per sample approved |
| 63 | Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000x450x50 mm reinforced with 8 mm dia four nos longitudinal and 9nos cross sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S flats of size 50mmx1.6mm complete all as per direction of Engineer-in-charge. |
| 64 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with.1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 65 | CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand) |
| 66 | Installation ofIP65 Bollard Light( of approved brand and make) with wiringand switches and required fittings. All Job Complete |
| 67 | PLUMBING:- Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
| 68 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 69 | Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040 mm bowl depth 250 mm |
| 70 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore |
| 71 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore |
| 72 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore |
| 73 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 74 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.15 mm nominal bore with 45 cm length |
| 75 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineerin- charge. |
| 76 | Providing and fixing toilet paper holder :C.P. brass |
| 77 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved qualityand colour, weighing not less than 105 gms. |
| 78 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 79 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diametre |
| 80 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diametre and weighing not less than 440 grams. |
| 81 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 82 | WATER SUPPLY INTERNAL:- Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/cfixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. A) PN - 16 Pipe, 20mm OD (SDR-7.4) |
| 83 | b) PN - 16 Pipe, 25mm OD (SDR-7.4) |
| 84 | c) PN - 16 Pipe, 32mm OD (SDR-7.4) |
| 85 | d) PN - 16 Pipe, 40mm OD (SDR-7.4) |
| 86 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/cfixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing ofjoints complete as per direction of Engineer-in-Charge.Concealed work,including cutting chases and making good the wall etc.PN - 16 Pipe, 20mm OD (SDR-7.4) |
| 87 | PN - 16 Pipe, 25mm OD (SDR-7.4) |
| 88 | PN - 16 Pipe, 32mm OD (SDR-7.4) |
| 89 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/cfixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge.Internal Exposed on wallsa)25 mm dia nominal bore |
| 90 | 32 mm dia nominal bore |
| 91 | 40 mm dia nominal bore |
| 92 | 50 mm dia nominal bore |
| 93 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : a)20 mm dia nominal bore |
| 94 | 25 mm dia nominal bore |
| 95 | 32 mm dia nominal bore |
| 96 | 40 mm dia nominal bore |
| 97 | 50 mm dia nominal bore |
| 98 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore |
| 99 | Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :25 mm nominal bore |
| 100 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 101 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :150 x 100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 102 | Providing and fixing inslulation of pipes with Heat-Tape wire along with a layer of foam insulation (50mm thick) of make K-Flex of equivaluent with protective outer layer. All job complete |
| 103 | SOIL WASTE AND VENT PIPES:- Providing and fixing 100% stainless steel grating with frame of approved make and quality grade 304 on top of floor trap. The rate includes the cost of all ancillary works and material as required to complete the works.125 x 125 x 1mm |
| 104 | 75x75 x1 mm |
| 105 | Providing and fixing SS Floor clean out/clean out plug with SS cover and EPDM seal complete in all respects including fixing of SS cleanout plug with CP brass screws. (Make:Chilly or Equivalent)100mm dia |
| 106 | Providing and fixing uPVC P/S trap(Type-B, IS:13592) of self cleansing design with or without vent arm complete, including cost of cutting and making good the walls and floors.(Make:Supreme/Finolax)a) 110mm outer dia inlet and 110 mm outer dia outlet uPVC as per IS:13592 |
| 107 | Providing and fixing 110mm outer Dia uPVC inlet fitting approximately 450/600 mm long with one or more 40/63mm outer dia. uPVC sockets solvent welded complete.(Pipe class-V, Sockets class-V)(Make:Finolax/Prince/API Apollo) |
| 108 | Providing and fixing uPVC Pipes complete (I:S 4985 class-V) with uPVC fittings e.g. elbows, tees , reducers, unions , plugs etc. and clamps and jointing with solvent cement including chase cutting and making good the walls etc. wherever required for waste connection from W.B., Urinals, floor drain etc. (Make:Finolax/Prince/API Apollo) a)40mm outer dia |
| 109 | 63mm outer dia |
| 110 | Providing and fixing uPVC pipe conforming to IS:13592 class-B with all fittings (door or plain) conforming to IS:13592. The fittings shall include cost of bends, junctions (double or single), terminal guards, etc. The quoted rates shall include cost of jointing coupling with solvent cement for horizontal pipes and rubber ring for vertical pipes and pipe supports. All items complete nothing is payable for any other fittings.(Make:Finolax/Prince/API Apollo) For Vertical Pipes a) 110 mm outer dia |
| 111 | Providing and fixing uPVC pipe conforming to IS:13592 class-B with all fittings (door or plain) conforming to IS:13592. The fittings shall include cost of bends, junctions (double or single) etc. The quoted rates shall include cost of jointing coupling with solvent cement for horizontal pipesand pipe supports. All items complete nothing is payable for any other fittings.(Make:Finolax/Prince/API Apollo) For Pipes Inside Toilets a)110 mm outer dia |
| 112 | Supply, erection, testing & commissioning of solar water heating system comprising of solar collectors, storage tanks, associated piping and valves, control etc all complete with following details :System temperature output : 60 degree C (during clear sunny days)System type : Thermo siphonSystem : Non Pressurised, Open loopApplication : Bathing / Washing / CookingType of Solar Collectors : Glass tube Evacuated Tube typeNumber of Collector : To suit system requirement.Hardware : SS 304Insulation : PUF (Polyurethane Foam)Hot Water Tank : Cylindrical - vertical / horizontal, Stainless steel 304 grade with minimum 50 mm thick PUF insulation of 32 kg/m3 or higher density including 22 SWG aluminium cladding. ARV and anti vacuumvalve should be provided with necessary piping.The entire system should be complete with internal piping in G.I. (classB) with 50 mm rock wool insulation of density 48 kg/m3 with 26 SWG Al cladding, necessary isolation valves, NRV, Y type CI strainer, hardwares, air vents, temperature gauge of range 0 - 120oC, water meter, Aluminium G.I. structure / stand as required to complete the system in all respects.The entire system should be approved by as per local authority /Ministry of new and renewable energy (MNRE) regulationsSystem Capacity : 100 liters per day (LPD). |
| 113 | ELECTRIC WORK:- SUB-A POINT WIRING , DISTRIBUTION BOARD & SOCKETS:- Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group A |
| 114 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required Group A |
| 115 | wiring of following light point with 1.5 sq.mm FRLS PVC insulated copper conductor cable in PVC conduit recessed including chasing of wall, filling of chases with cement mortar 1:3 mix and /or fixing conduit on surface of wall/ceiling including fixing of saddles etc. includingmodular range of plate switches, modular cover plate, ceiling rose, surface or deep tee,circuit wiring (2x2.5+1x2.5), 1.5 sq.mm FRLS PVC insulated copper earth wire, etc. complete as required. One point controlled by one number 10 Amp MCB(First point) |
| 116 | Looping Point above |
| 117 | Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed medium class PVC conduit asrequired.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 118 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 119 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 120 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 121 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.25 mm |
| 122 | Supplying and fixing suitable size GI box with modular plate andcover in front on surface or in recess, including providing andfixing 3 pin 5/6 A modular socket outlet and 5/6 A modularswitch, connections etc. as required. |
| 123 | Supplying and fixing suitable size GI box with modular plate andcover in front on surface or in recess, including providing andfixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 Amodular switch, connections etc. as required. |
| 124 | Supply & fixing of Universal Socket with 4.0 sq.mm PVC insulated multistranded copper conductor cable (FRLS Type) in surface / recess 1.8 mm thick PVC conduit including cutting the chases in wall & making good the same including providing & fixing of M.S. Switch & outlet box, modular range 13Amp switch with 3 pin 13Ampsocket, modular cover plate, earthing with 4.0sq.mm PVC insulated copper conductor cable / wire (FRLS Type) etc. complete as required & as per specifications. |
| 125 | Supply and Wiringfor 250 volts singlephase and neutral 1 Nos 6 amps socket outlate with controol by 1 No switched with 2.5 sq.mm PVCinsulatedcopper conductor1100 volts grade stranded flexible FRLS wires inconcealed or surface mounted 25 mm dia 2mm thickPVC conduit including providing and fixing of 6 amps 3 pin switch socket outlet of aprpoved make and design in 2 mm thick GI box with grid plate and earthingofthird pin of the socket with2.5Sq. mm PVC insulated copper conductor strandedflexibleFRLSwire. (ON UPS SUPPLY) |
| 126 | Supply & fixing of 20A Industrial Socketwith 4.0 sq.mm PVC insulated multistranded copper conductor cable (FRLS Type) in surface / recess 1.8 mm thick PVC conduit including cutting the chases in wall & making good the same including providing & fixing of M.S. Switch & outlet box, modular range 20Amp switch with 3 pin 20Ampsocket, modular cover plate, earthing with 4.0sq.mm PVC insulated copper conductor cable / wire (FRLS Type) etc. complete as required & as per specifications. |
| 127 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)8 way (4 + 24), Double door |
| 128 | Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earthbar, din bar, interconnections, powder painted includingearthing etc. as required. (But without MCB/RCCB/Isolator)8 way , Double door |
| 129 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps |
| 130 | Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.100 amps |
| 131 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\"curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing MCB DB complete withconnections, testing and commissioning etc. as required.Single pole |
| 132 | Supplying and fixing single pole blanking plate in the existingMCB DB complete etc. as required. |
| 133 | Sub-B LIGHTS AND FANS :-SITc OF 12 W SURFACE/RECESS MOUNTED LED DOWNLIGHER as/Specification,Aluminium housing,system watage -12 w,Lumen pack -1200 with eficacy - 100lm/w,CRI-80. surge protection - 2kv, IP -20 with IS 10322 (part 5/Sec.1)-2012,Model - BZSLO pro 12W RDWH |
| 134 | SITC of 10 W WH LED Bulkhead Light as/Specification,PDC AL Housing,system watage -10 w,Lumen pack - 800 with eficacy - 800lm/w,CRI-80. , IP -65,Surge protection - up to 5 kv with IS 10322 (part 5/Sec.1)-2012. |
| 135 | SITC of 8 W WH LED Mirror Light as/Specification,Polycarbonate housing,system watage -10 w,Lumen pack - 1000w with eficacy - 100lm/w,CRI-80. , IP -20 with IS 10322 (part 5/Sec.1)-2012. |
| 136 | Supply installation testing commissioning of 36WRECESSED TWIN MIRROR OPTIC TYPE FITTING |
| 137 | SITC of 1200 Sweep Ceiling Fan As/Specification |
| 138 | SITC of Bracket Light on Wall as/Specification - Housing: Stainless steel housing.? Diffuser: “Cone” shaped frosted glass fixed in decorative stainless steel ring.? Installation: Wall mounting through back plate.Model - BJLF4 7W RFWH? Lamp type: Suiatable for 1 x RF LED 7W, Lamp base: B22 |
| 139 | Supply installation testing commissioning of 24WRECESSED TWIN MIRROR OPTIC TYPE FITTING |
| 140 | Supply, installation, testing and commissioning of 52-Port Gigabit Smart Managed Switch having 48 x 10/100/1000BASE-T ports, 4 x Combo 10/100/1000BASE-T/SFP ports , 104 Gbps Gbps Switch Capacity, 77.4 MppsMax. Packet Forwarding Rate , 992,594 hours MTBF, etc complete as required.(Make:- D-LINK/CISCO/HP) |
| 141 | Supply, installation, testing and commissioning of48 Port cat-6 Patch panel available with Identification: ID plate, PVC, Transparent color with paper,Six Port RJ45 modules applied ,Compatible with both 110& Kronepunch downtools, Improved Cable Management withoptional cable management bar, Insertion force: 20N max.etc as required.(AMP/D-LINK/MOLEX) |
| 142 | Supply, installation, testing and commissioning of 3meter cat-6 patch cordfor connecting socket module/modular wall face plate outlet andwork stations in the premises etc complete as required..(AMP/D-LINK/MOLEX) |
| 143 | Supply, installation, testing and commissioning of1meter cat-6 patch cordfor connecting Patch panel to switches, etc complete as required.(AMP/D-LINK/MOLEX) |
| 144 | Supply, installation, testing and commissioning of6 U Floormounting rack with Front Door with Toughened Glass quality. Adjustable Mounting rails -Front and Back,Fan Mounting provision,bottom cable entry provides Optimal flexibility for cable management,power poins, Frame structure with max loading capacity, etc complete as required.(NETRACK / VALRACK / D-LINK) |
| 145 | CCTV SECURITY SYSTEM:- Supply, Installation, Testing & Commissioning ofNetwork WDR 2MP IR Rugged Mini Dome Camera having12.8” 2 Megapixel progressive CMOS image sensor,Min. Illumination required 0.002ux/F1.5(color,30IRE) 0Lux/F1.5(IR on), 120dB True WDR,H.265/H.264B/Smart Codec / MJPEG (Sub Stream),2.7mm~13.5mm, Motorized, F1.5 lens,Smart IR with upto 40m IR distance, Up to 128 GB microSDHC card, Class 10 (not included), DC12V, PoE (802.3af) (Class 0),ingress protection IP67,vandal resistance IK10,ONVIF ProfileS/G/Q, FCC Part 15B, EN 55032,EN 50130-4,UL 60950-1, EN 62368-1,EN 50581,etc as required. (HONEYWELL/BOSCH/AXIS) |
| 146 | Supply, Installation, Testing & Commissioning ofNetwork WDR 2MP IR Bullet Camera having1/2.8” 2 Megapixel progressive CMOS,2.7 mm – 13.5 mm MFZ Lens,True day/night (IR-cut filter),Wide dynamic range up to 120 dB,Low-light performance down to 0.002 Lux / F1.5 (color, 30IRE), 0 Lux (IR ON),Up to 197 ft (60 m) IR lumination, H.264/H.264B/H.265/Smart Codec/MJPEG (Sub Stream) , Support up to Up to 128 GB micro SDHC card, Class 10 (not included), DC12V or PoE (802.3af)(Class 0), IP67 INGRESS PROTECTION ,ONVIF Profile S/G/Q, FCC Part 15B, EN 55032, EN 50130-4, UL 60950-1, ROHS- EN 62368-1, certifications, etc as required.(HONEYWELL/BOSCH/AXIS) |
| 147 | Supply Installation Testing and Commissioning of 6 Channel NVR (Network Vedio Recorder) having Quad-core embedded processor , Embedded LINUX ,1 HDMI (up to 3840 × 2160);1 VGA , H.265/H.264/MJPEG/MPEG4 compression, 2 SATA ports, up to 16 TB, Input 320 Mbps; Output 320 Mbps network throughput , 8 ports (802.3af/at) POE, FCC , ROHS , UL Certifications,etc as required. (HONEYWELL/BOSCH/AXIS) |
| 148 | Supply, installation, testing and commissioning of 4TB SurveillanceHard DiskS V SERIES-offer high capacities, durable reliability and performance tuned to the high-write workloads of today’s 24×7 video surveillance systems as required. ( SEAGATE/WD/HITACHI) |
| 149 | Suppling,Laying & fixingof 15 MTR HDMIcable on surface as reqd .(Stackfine/Extron/Kramer) |
| 150 | Supply, installation, testing and commissioning of1 KVA UPS with30 minutes back-up with inbuilt battery complete etc as required. (APC/MICTOTEK/VGUARD) |
| 151 | Supplying and commissioning of 9 U rackwith 1no extra tray , Power Distribution Unit of05Amps of 05 nos.Socket in a Single Pole / Screw,Mountable,etc as required.(WQ/VALRACK/D LINK) |
| 152 | Supply, installation, testing and commissioning of 10 Port Managed POE Switch having 8 nos 10/100/1000 PoE ports with 62W power budgetand 2 Combo mini-GBIC ports ,Static routing, QoS, Voice/Guest VLAN, GVRP, MSTP, IGMP Snooping, Time-based Access Control Lists, 802.1x including DVA, Web-based Authentication, IP/MAC Binding, Private VLAN Edge, IPv6 First Hop Security, IP Source Guard as requird.(Make – CISCO – Model - SG – 350/ 10 /HP/JUNIPER) |
| 153 | Supply, installation, testing and commissioning of 43\" LED monitor includes Screen size :43\" Diagonal Size, LED BLU type technology, resolution- 3840 X 2160 ,250 nits brightness, 4700:1 contrast ratio, stereo mini jack, HDMI I/p-2 , USB-1, compatability for wifi, bluetooth suitable for operation on AC Power supply AC 240 V~ (+/- 10 %), 50/60 Hz,etc required.(SAMSUNG, Model – BE 43TH/SONY/LG) |
| 154 | Supply Installation, Testing and Commissioning ofEPABX System SIP Compliant. Wall/Rack Mountable,Expandable upto 128 Ports.and configured with 500 intercom as for below PortsP & T(CO Trunk) Line 08 Nos.Digital Extension Circuit 08NosAnalog Extension Circuit 24 Nosintercom outlet.500 nos. |
| 155 | Supply Installation Testing and Commissioning of 24Key Digital Phone Backlit keypad Hands-free, full duplex ,Headset support Easy to use soft keys/LCD prompts,Directory dialling,Navigation wheel,Call history,Backlit LCD screen,Bluetooth support (BCAZ),Security lock key XML open interface |
| 156 | Supply Installation, Testing and Commissioning of Analog Speaker Phone with backlight.NOTE: ALL THE ITEMS IN THE BOQ ARE INCLUSIVE OF CARRIAGE CHARGES |
