Howrah Improvement Trust has published Balance Work For Proposed G Plus 3 Storied Hit Complex Commercial And Residential At 77 Bye 2 Makardah Road Howrah. Submission Date for this Tender is 19-12-2022. Civil Work Tenders in howrah West Bengal. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earthwork in excavation of foundation trenches or drains etc. in all sorts of soil (including mixed soil but excluding laterite or sand stone) including removing, spreading or satcking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom bailing out water etc.as required complete. (a) Depth of excavation not exceeding 1500 mm. |
| 2 | Earth work in filling in foundation trenches, plinth ,compound,tank,low land, ditches etc with good earth, in layers not exceeding 150 mm including watering and ramming etc. layer by layer complete. ( Payment to be maid on the basis of measurement of finished quantity of work.) (a) With earth obtained from excavation of foundation. |
| 3 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) |
| 4 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 5 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (f) 25 mm to 30 mm shuttering without staging in foundation. |
| 6 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety |
| 7 | Brickwork with 1st. class bricks in cement mortar (4:1)(a) In foundation and plinth |
| 8 | 125 mm thick brickwork with 1st class bricks in cement mortar (4:1) (a) In ground floor |
| 9 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (b) Steel shuttering or 9 to 12 mm. thick approved quality ply board shuttering. (i) Upto roof ofGround Floor. |
| 10 | Reinforcement for reinforcement concrete work in all sorts of structures including distribution bars, stirrups, binders, etc. including supply of rods, initial straightening and removal of loose rust (if necessary) cutting to requisite length, hooking and bending to correct shape, placing in proper position and bending with 16 guage black annealed wire at every intersection, complete as per drawing and direction. Tor steel / Mild steel. JSW/JSPL/SHYAM/SRMB/BMASL/ELECTROSTEEL In foundation, basement and upto roof of ground floor/upto 4 M. |
| 11 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety |
| 12 | Plaster (to wall, floor, ceiling, etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosingand drip course, scaffolding /staging where necessary. (Excluding cost of chipping over concrete surface.) (A)With 1:4 cement morter.(i) 20 mm. thick plaster(Internal). (a) In Ground floor. |
| 13 | (i) 15 mm. thick plaster(External). (a) In Ground floor. |
| 14 | (i) 10 mm. thick plaster. (a) In Ground floor. |
| 15 | Neat cement punning about 1.5mm thick in wall, dado, window sills, floor, drain etc. |
| 16 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement (ii) 25 mm. thick |
| 17 | Applying exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer"s specification and as per direction of the EIC. (b) Two Coats. In Ground floor. |
| 18 | Protective and decorative acrylic exterior emulsion paint of approved quality and brand, as per manufacturer"s specification and as per direction of EIC to be applied over acrylic primer as required . The rate includes cost of material,labour, scaffolding and all incidental chages but excluding the cost of primer. (a) In Ground floor.(Two coat). (c)Super Protective 100% Acrylic Emulsion. |
| 19 | M.S. or W.I. Ornamental grill of approved design, joints continuously welded with M.S., W.I. flats and bars for windows railings, etc. fitted and fixed with necessary screws and lugs. (ii) Grill weighing above 16 Kg./sq.mtr and above. (a) In Ground floor. |
| 20 | Priming one coat on steel surface or other metal surface with synthetic oil bound primer of apprived quality and brand including smoothening surfaces by sand papering, etc. |
| 21 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surfaces by sand papering etc.including using of approved putty etc.on the surface, if necessary. (a) On steel or other surface . Withsupergloss(hi- gloss). (i) Two coats (with any shade except white) |
| 22 | 60 mm thick interlocking designer concrete paver block M- 35 grade for light-traffic zone,commercial & office complex,tourist resort as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular /granular sub-base course including cost of sand for sand bed but excluding cost of base ,sub-base course & subgrade preparation.) (ii) Coloured Decorative |
| 23 | Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor) (i) In wall:- (c) With 0.80mm thick sheet |
| 24 | Supplying& laying 20 mm designer chequered tiles of any shade and of approved quality as per IS: 1237: 1980 laid in patterns as directed in pavement, footpath including necessary underlay 25 mm thick average cement mortar (1:3) complete in all respect with all labour and materials [using cement slurry @ 4.4 kg/Sq.m at back side of tiles. Cement of mortar & slurry will be supplied by the Department. Border concrete if necessary to be paid separately]. |
| 25 | Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (a) For Exposed Work (i) CPVC Pipes Class-1, SDR-11 40 mm Dia |
| 26 | 25 mm Dia |
| 27 | 15 mm Dia |
| 28 | Polythene Bib Cock / Stop Cock with plastic inlet (EMCO / ATLAS or equivalent) 15 mm |
| 29 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). |
| 30 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound in conformity with the Municipal /Corporation Rules for such disposal, loading into truck,unloading from truck and cleaning the site in all respect as per direction of Engineer in charge. |
| 31 | Electrical works Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating Rating 100 A, Make :-L &T / PWD approved make (On angle iron frame) |
| 32 | Supplying and fixing sheet steel (16SWG) cable end box on TPN SFU enclosure with nuts bolts etc incl. powder coated painting.(For100 A/125 A SFU) |
| 33 | Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991) 4 Bar,100A/125A |
| 34 | Supplying and fixing 415V 63A Four Pole Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc. Make :-Havells / PWD approved make |
| 35 | Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2 + 4 way, Make :- legrand/ PWD Approved make |
| 36 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & " C " characteristics on din rail of existing DBs and necessary connection , Rating 6-32 A, SP,make : legrand/ PWD Approved make |
| 37 | Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection, rating 40A,DP, make : legrand/ PWD Approved make |
| 38 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded "FR" PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded "FR" PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface] Average run 6 mtr |
| 39 | Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded "FR" PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded "FR" PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to 5A 3 pin flush type plug socket with piano key type switch (Anchor make) fixed on sheet steel fabricated CRC MS switch board with bakelite/perspex (wall matching color) top cover of 3 mm thick flushed in wall by housing the board after cutting brick wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping and plug box both on surface] Average run 1.5 mtr. |
| 40 | Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded "FR" PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded "FR" PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to 5A 3 pin flush type plug socket with piano key type switch (Anchor make) fixed on sheet steel fabricated CRC MS switch board with bakelite/perspex (wall matching color) top cover of 3 mm thick flushed in wall by housing the board after cutting brick wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping on surface and Switch board concealed](Avarage run 3 mtr) |
| 41 | Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction. (19mm dia 3mm thick Polythene Pipe) |
| 42 | Supplying and fixing PVC Rigid Conduit "FR" [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works. 25 mm, |
| 43 | Supplying and Drawing 1.1 KV single core stranded "FR" PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. (2 X 2.5 sqmm + 1 x 1.5 sqmm) |
| 44 | Supplying and Drawing 1.1 KV single core stranded "FR" PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. (2 X 1.5 sqmm + 1 x 1.5 sqmm) |
| 45 | upplying and Drawing 1.1 KV single core stranded "FR" PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. (2 X 10 sqmm + 1 x 6 sqmm) |
| 46 | Supply and delivery of 10 Pair telephone cable. |
| 47 | Laying of cable upto 10/20 pair telephone cable on wall/surface incl. S & F MS saddles, making holes etc. as necy. mending good damages and painting. |
| 48 | Supply and fixing og 10 Pair Telephone DB Box. |
| 49 | Supply, Delivery and fixing of Sub mersibleCentrifugal Monoblock Pump, 3 HP, Havells Make. |
| 50 | Supply, Delivery of Sub mersible pump control panel Havells / Approved Make. |
| 51 | Supply of 4 Sq. mm. copper Flat Three Core PVC Insulated & PVC Sheathed Industrial Cable for Submersible Pump Motors |
| 52 | Fixing outdoor type fluorescent/SV/MV light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated & sheathed wire (single core) partly in GI conduit & partly through above bracket from OH line to the fitting, without control switch, incl. making connections and painting. |
| 53 | Supply and delivery of 7 Mtr. Long Swaged type Steel Tubular Pole conforming 410-SP- 03 with 1.5 Mtr. Single Arm & base plate (300 x 300 x 6mm). Make: (J K Pole/Utkarsh/as approved by EIC) |
| 54 | Erection of Single Steel tubular pole oflength upto 9.0 mtr. (Size 0.6x0.6x1.70 mtrs.) with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate / pole with hard jhama metal including CC (6:3:1) muffing 0.30 mtrs. dia and 0.30 mtrs. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from store to work site including filling up the excavated earth pit with shifted soil and ramming properly. |
| 55 | Extra on above item no. 2, for providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mtr. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) suitable for alkathene/ polythene pipe entry as directed for street light wiring, incl. S & F 25cmx25cmx10cm GI Loop box, 16SWG & incl. drilled hole in pole. |
| 56 | Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. (a) Upto 9.0 mtr. long pole 1st coat of aluminium paint over 1 coat of RO priming. |
| 57 | 2nd coat of aluminium paint over 1st coat |
| 58 | Supply & delivery of LED 36W Street Light. Make: Philips/Magik/PWD Approved make |
| 59 | Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure |
| 60 | Supply and delivery of 1.1 KV Gr. Aluminium conductor XLPE insulated Armoured PVC outer sheathed power cable conforming to IS: 7098(part-1) (Make : Gloster/Havells)Approved make 2 Core10 Sq. mm. Cable. |
| 61 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 2 Core 10 sq.mm. |
| 62 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 2 Core 10 sq.mm. |
| 63 | Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed |
| 64 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: (a) By ISI-Medium GI pipe |
| 65 | Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required |
| 66 | Add GST |
| 67 | Add Cess |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
