|
| 1 | Procurement Of Mechanical Spares For Track Machines |
| 2 | Piston rod with piston for hook lifting cyl.of UNI with clevis joint head compl. Material EN-24 ofpiston & piston rod. Piston welded with piston rod duly ground finished and hard chromed Piston rod part no.HZ10.080.045.0350.2 POS NO.3, Clevis pt.no. UD311.2112-4 POS -7 Gr.no. UD.311VIII J Make-Plasser orequivalent.) [ Warranty Period: 30 Months after the date of delivery] |
| 3 | BEARING HOUSING (HANDI) PT. NO. UD.75.304 [ Warranty Period: 30 Months after the dateof delivery] |
| 4 | Piston rod assy complete for small sq.cyl. Of CSM. Items & specifications as per annexure `Aattached. HZSI-K-57-5- 403-KPL Gr.No. UD14 IE Make-Plasser or equivalent. [ Warranty Period: 30 Monthsafter the date of delivery]Page 1 of 8 Run Date/Time: 06/12/2022 13:47:59STORES/WESTERN RLYTENDER DOCUMENT |
| 5 | Rail clamp lever Male DL150.60 Make-Plasser or equivalent. [ Warranty Period: 30 Months afterthe date of delivery] |
| 6 | Rail clamp lever Female DL150.61 Make-Plasser or equivalent . [ Warranty Period: 30 Monthsafter the date of delivery] |
| 7 | Steel bush for tyne holder Mat: EN 353/SAE 8620 HRC 55 ? 3 RDSO Specification TM/HM/6/248Drg No.TM/0557 CU37.308 Make-Plasser or equivalent . [ Warranty Period: 30 Months after the date ofdelivery] |
| 8 | Swivel bearing Mat: of alloy steel casting grade 709M40 (EN 19) conforming to BS970 (Pt.II 1970)hardness 220 to 230 BHN RDSO Specification : TM/HM/6/502 RDSO Drawring No.RDSO/TM/18/21 W37.1301Make-Plasser or equivalent. [ Warranty Period: 30 Months after the date of delivery] |
| 9 | \"U clamp with hex double nut on each side, locking strip & spring washer size M 16 x190, Pitch -2mm, Thread length - 105 mm, c/c - 61 mm One set consist of i) Screw confirming to plasser part no.62.09.1066, Qty-1 no. Materia EN-19, ii) Spacer confirming to plasser part no. 64.09.5208, qty-1 no., MaterialEN8, iii) Nut confirming to plasser part no. 62.14.2182 Qty-2 no., iv) Spring washer Qty-2 no., v) Plain washerQty-2 nos.\" - Make-Plasser or equivalent. [ Warranty Period: 9 Months after the date of delivery] |
| 10 | Dredger drum disc material EN36 alloy steel one piece forged and hardened up to 45 to 50 HRC &matching to teeth as per original profile Part No. 61.04.519 Make-Plasser or equivalent . [ Warranty Period: 30Months after the date of delivery]Page 2 of 8 Run Date/Time: 06/12/2022 13:47:59STORES/WESTERN RLYTENDER DOCUMENT |
| 11 | Corner Roller Assembly Complete for BCM RM-80 machine. Details as per Annexure-A64.08.5000.21 Make-Plasser or equivalent . [ Warranty Period: 30 Months after the date of delivery] |
| 12 | HOOK TRACK LIFTING Material EN24 UD313.1304 RH(RE) Gr.No. UD307.1B Pos No. 4AMake-Plasser or equivalent [ Warranty Period: 9 Months after the date of delivery] |
| 13 | HOOK TRACK LIFTING Material EN24 UD313.1304 LH(LI) Gr.No. UD307.1B Pos No. 4 Make-Plasser or equivalent . [ Warranty Period: 9 Months after the date of delivery] |
| 14 | Feeler rod assy. complete with nuts & lock pieces reqd. for levelling system of CSM/DUO Material- MS Bright bar. (Lock pieces should be given separately) UD252-1201-2 and UD252.401-2 GroupNo.UD254.VI.J Pos No.43 & 43A Make-Plasser or equivalent . [ Warranty Period: 30 Months after the date ofdelivery] |
| 15 | Piston Rod assy. complete for smallest squeezing cylinder for modified tamping bank of 3X-3962tamipng machine Items & specifications as per annexure ?A? attached. HZSI.K.40.418 Group no. UD15.VI.HPosition no. 2 to 11,15,16 & 17. Make-Plasser or equivalent. [ Warranty Period: 30 Months after the date ofdelivery] |
| 16 | Piston Rod assy complete for big sqeezing (closing) cylinder of CSM Items & specifications as perannexure `A? attached. HZSA-K-245- KPL Gr.No. UD14 IE Make-Plasser or equivalent.) [ Warranty Period: 30Months after the date of delivery] |
| 17 | Cup Washer (Disc) (RDSO specification No.TM/HM/6/173, Drg No. TM / 0437) 2E.31.19ARTMake-Plasser or equivalent . [ Warranty Period: 30 Months after the date of delivery] |
| 18 | Lining Roller Complete Assembly Details as per annexure Part No.2E.150.23.IAS Group no -UD152.IR Make-Plasser or equivalent . [ Warranty Period: 30 Months after the date of delivery] |
| 19 | Transverse beam Material Specificaton - EN8 or MS 64.09.1207 Make-Plasser or equivalent. [Warranty Period: 30 Months after the date of delivery] |
| 20 | Transverse beam Material Specificaton - EN8 or MS 64.09.1606 Make-Plasser or equivalent. [Warranty Period: 30 Months after the date of delivery] |
| 21 | Connecting Elbow suitable for hydraulic lock arrangement system 64.08.1997 Make-Plasser orequivalent . [ Warranty Period: 30 Months after the date of delivery] |
| 22 | Callotte (as per sample) 64.09.1213 Make-Plasser or equivalent . [ Warranty Period: 30 Monthsafter the date of delivery] |
