Tender For Supply And Delivery Of Sullage Vehicle 6000Lit Capacity Under 15Th Cfc 2022-23 Tied Grant In Tambaram City Municipal Corporation, tambaram-Tamil Nadu

Supply And Delivery Of Sullage Vehicle 6000Lit Capacity Under 15Th Cfc 2022-23 Tied Grant In Tambaram City Municipal Corporation , Supply And Delivery Of Chairs Suitable For Sullage Tanker Of Reputed Mannufactures Or Their Authorised Dealers With Following Specifications ( Not More Than The Gem Rate ) 1 ) Full Frame Chassis Engine 3.3L Ng Bs6 Engine, 140Kw ( 125Os ) Powers @2600R / Min, 390Nm @ 1000-2200 R / Min, Clutch - Single Plate Dry Friction Type - 310M Dia , Gear Box-Gbs-40Gear Box ( 5F, 1R ) , Suspension -Front Type --Semi Elliptical Leaf Spring With Hydraulic Double Acting Telescopic Shock Absorbers, Suspension Rear Typesemi Elliptical Leaf Spring, Tyres, 8.25X16-16Pr ( Fr-2, Rr-4, Spare-1 ) , Cabin Type - Day Cab, Steering Type-Tilt & Telescopoe Power Steering ( Dia-426Mm ) , Brakes Type- Dual Circuit Full Air S Cam Brakles With Auto Slack Adjuster ( Drum-Drum ) , Ground Clearance ( Mm ) -221, Gradeability -28.540%, Rear Axle Ratio-Ra 1068R, Fully Floating Banjo Axle ( Rar 4.42 ) , Battery-12V To 100Ah, Fuel Tank Capacity ( Lt ) , 185L, Load Body Variants, Cab, Clb, Hsd, Containers, Gvw ( Kg ) 9600Kg, Faw ( Kg ) -3250Kg, Raw ) Kg ) -6350Kg, Wb 3955Mm 2. Body Building & Sullage Tankers Of 6000Ltr With Following Specification: Tank: Round Shape Made Out Of 5 Mm Thickness Ms Sheet With Open Able Back Door. The Tank Should Be Constructed On 70 X 50 X 5Mm Ismc Channel. Tank Inner Side Shall Be Two Coats Of Corrosive Resistive Painting. Vacuum Pump; The Exhauster Compressor Shall Be Having A Capacity Of Minimum 540 Cu.M. Per Hour And Suitable For Operation At Vacuum Of 90% Should Be Of Water Ring Vacuum Pump And Capable Of Sucking Of Sludge From 6-7 Meters. Through 100Mm Dia Suction Hose. The Exhauster Compressor Shall Be Designed To Operate In The Pressure Mode Up To 5 Kg / Sq.Cm. Pressure For Effecting The Blow Back Of Sewer Sludge Back Into The Collecting Chamber. The Vacuum Pump Shall Be Mounted On Sub Frame And Installed Under The Chassis Without Disturbing The Main Frame And The Vehicle Dimensions As Per O.E. The Above Unit Can Be Utilized For Operating Under Both Suction And Over Pressure Modes With Necessary Protection Release Valves And A Special 4-Way Valve Is Provided In The Exhauster Compressor Body For Effecting The Change Over From Suction To Pressure. Suction Hose 100 Mm Dia Heavy Duty Spiral Bound Neoprene Rubber Suction Hose - 15 Meters. Ladder: Made Out Of 25Mm Round, 2 Mm Thick Pipe Non Corrosive. Painting And Lettering: Slogan Writing And Name Of The Corporation Etc., As Per Instruction Of The Departmental Officers. The Sullage Lorry Should Be Provided With Standard Necessary Accessories ( Including Gst )

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	20-12-2022	Extension of Date	Date	28-12-2022

Refer document

INR 30 Lakhs /-