Indian Oil Corporation Limited-IOCL has published Tender For Providing Service Support For Mechanical Maintenance Works At Wrpl Kaspl Dumad And Mov/Rcp Stations Under Dumad Jurisdiction.. Submission Date for this Tender is 20-12-2022. Mechanical engineering Service Tenders in Vadodara Gujarat. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Providing service support during monthly maintenance of Mainline Pumping Units including general cleaning, cleaning of the oil spillage in the surroundings of mainline pump shed caused due to checking of pressure gauges, lubricant contamination, leakage of cooling liquid, leakage in gland ring, including shifting of drain product into sump tank etc. as per the directions of Engineer-in-Charge as on when required. |
2 | Providing service support during quarterly maintenance of Booster Pumping Units including general cleaning, cleaning of the oil spillage in the surroundings of booster pumping units caused due to checking of pressure gauges, lubricant contamination, leakage of cooling liquid, leakage in gland ring, including shifting of drain product into sump tank etc. as per the directions of Engineer-in-Charge as on when required. |
3 | Providing service support during monthly maintenance of sump pump & CI pump unit including general cleaning, cleaningof the oil spillage in the surroundings etc. as per the directions of Engineer-in-Charge as on when required. |
4 | Providing service support during maintenance of Station Valves,basket Strainers, Y type strainer,Coalscer filter, Prefilter, including general cleaning, cleaningof the oil spillage in the surroundings of Valves caused due to checking oflubricant contamination, leakage of liquid, including shifting of drain product into sump tank as per the directions of Engineer-in-Charge as on when required |
5 | Providing service support duringmaintenance of Station Valvesincluding general cleaning, cleaningof the oil spillage in the surroundings of Valves caused due to checking oflubricant contamination, leakage of liquid, as per the directions of Engineer-in-Charges on when required. (Transportation shall be provided by IOCL) |
6 | Providing service support for quarterly taking readings of corrosion coupons as per the directions of Engineer-In-Charge as on when required. |
7 | Providing service support for Vibration Readings for all equipments as per direction of Engineer-In-Charge as on when required. |
8 | Providing service support for preparation of pig insertion, retrieval, cleaning,loading/unloading, cleaning of barrel area, etc as per the directions of Engineer-in-Charge as on when required. |
9 | Providing service support for miscellaneous work of exigency in station such as Odd Hrs Works etc. as per the directions of Engineer-in-Charge as & when required. Unit EA shall means man-hrs required for the job |
10 | Providing hydraulic crane with skilled operator along with belts, chains, hooks etc for various jobs as per directions of EIC/ Site Engineer |
11 | Above ground process piping: Taking delivery & transporting of pipes from designated stock pile location /Designated godown both from outside & inside station premises. Taking delivery of pipe fittings, steel flanges, spiral wound metallic gaskets & fasteners from designated location within station premises, transporting the same to site, fabrication and erection of above ground piping including cutting, edge preparation, bending, threading, lining up, welding and installing pipes and pipe fittings, flanges, elbows, equal and reducing outlet tees,concentric/eccentric reducers, y-type strainers, drain funnels, vent pipes and tapping for instruments such as pressure gauges, thermal relief valves, thermowells etc., installing above ground at all elevations connecting with equipment nozzles, valves, vessels, in line instruments etc., welded and threaded pipe line of different pressure ratings, flushing pipes by water after cleaning by compressed air, hydrostatic testing of each section to the specified pressure, draining the water, tie-in, final cleaning-up and dispoal of wastes and surpluses including providing all inputs such as labour, material, equipments and consumables necessary to perform the work (other than those specifically under taken by the owner in this contract) and completing the work in all respects in accordance with the drawings, specifications and instructions of Site Engineer / EIC. Thickness and Grade mentioned in the item are for reference only and may vary. Payment shall be based on OD 16" OD x 0.375"/0.438"WT APL 5L _D1 |
12 | Above ground process piping: Taking delivery & transporting of pipes from designated stock pile location /Designated godown both from outside & inside station premises. Taking delivery of pipe fittings, steel flanges, spiral wound metallic gaskets & fasteners from designated location within station premises, transporting the same to site, fabrication and erection of above ground piping including cutting, edge preparation, bending, threading, lining up, welding and installing pipes and pipe fittings, flanges, elbows, equal and reducing outlet tees,concentric/eccentric reducers, y-type strainers, drain funnels, vent pipes and tapping for instruments such as pressure gauges, thermal relief valves, thermowells etc., installing above ground at all elevations connecting with equipment nozzles, valves, vessels, in line instruments etc., welded and threaded pipe line of different pressure ratings, flushing pipes by water after cleaning by compressed air, hydrostatic testing of each section to the specified pressure, draining the water, tie-in, final cleaning-up and dispoal of wastes and surpluses including providing all inputs such as labour, material, equipments and consumables necessary to perform the work (other than those specifically under taken by the owner in this contract) and completing the work in all respects in accordance with the drawings, specifications and instructions of Site Engineer / EIC. Thickness and Grade mentioned in the item are for reference only and may vary. Payment shall be based on |
13 | OD 12.75" OD x 0.375" WT APL 5L _D3 |
14 | OD 3.5" OD x 0.216"WT ASTM A 106 Gr B /A333 _ |
15 | 2.375" OD x 0.218"WT ASTM A 106 Gr B /A333 _D9 |
16 | Piping Modification: Carrying out modification in already fabricated and/ or erected pipe due to change in drawing or as required by site condition, taking delivery of pipe, pipe fittings, steel flanges, spiral wound metallic gaskets & fasteners from designated location within station premises, transporting the same to site, cutting of pipe and / or weld joint , edge preparation, bending, lining up, welding and installing pipes and pipe fittings, flanges, elbows, equal and reducing outlet tees, concentric/eccentric reducers, y-type strainers, drain funnels, vent pipes and tapping for instruments such as pressure gauges, thermal relief valves, thermowells etc., installing above ground at all elevations connecting with equipment nozzles, valves, vessels, in line instruments etc., welded and threaded pipe line of different pressure ratings, flushing pipes by water after cleaning by compressed air, hydrostatic testing of each section to the specified pressure, draining the water, tie-in, final cleaning-up and dispoal of wastes and surpluses including providing all inputs such as labour, material, equipments and consumables necessary to perform the work (other than those specifically under taken by the owner in this contract) and completing the work in all respects in accordance with the drawings, specifications and instructions of Site Engineer / EIC. (Item is to be operated upon approval of SIte Enginner, Item covers only modification / rework jobs.) Piping Modification: Pipe size up to 2 inch NB_X1 |
17 | Supplying, fabricating, erecting, placing and fixing in position M.S. structural works using rolled/ built up sections for truss, claddings, bracings, purlins, supporting frames made of joists, tubes, pipes, channels, angles, plates, flats, bars etc. including cutting to required size welding of joints, fixing anchor plates, including bolts, theading, nuts, washers, sleeves etc. including preparation of detailed fabrication drawings & submission to the Engineer-in-Charge for approval before start of fabrication, supplying & applying painting with two coats of epoxy paint "EPILUX 155 High Build Enamel over a coat of "EPILUX 610" Primer of M/s BERGER or any other approved equivalent make as per manufacturer’s recommendation, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Excluding the cost of concrete work). |
18 | Dismantling of Structures |
19 | Painting: Zinc Ethyl Slicate Primer_D1 |
20 | Painting: High Build EPOXY MIO_D2 |
21 | Painting: Isocynate Aliphatic Poly Urethene(PU)_D3 |
22 | Uniform Expenditure:- Providing Uniform (shirt with Logo + trousers)to all workers involve in daily & Weekly activitiesis in the scope of the Contractor . The contractor has to provide 2 sets ofuniformper year or as decided by EIC. The contractor shall submit the bill of actual quantity executed towards uniform expenditure to the EIC and after verification by EIC, the expenditure shall be reimbursed maximum upto Rs. 4500/- per uniform per worker. |
23 | Safety shoes Expenditure:-Safety shoes has to be provided to all workers is in the scope of Contractor. The contractor has to provide the safety shoes in regular intervals i.e. once in a year. The contractor shall submit the bill of actualexpenditure incurred to the EIC and after verification of the bills by EIC the expenditure shall be reimbursed maximum upto Rs. 1350/- per year per worker. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail