Tender For Providing First And Last Mile Connectivity Of 3.5 Km Long 2-Lane To 4-Lanewith Drain From Visa Square To Jsl Material Gate (Utility Corridor-Ii) In Kalinganagar Industrial Complex(Knic) Dist-Jajpur,
Tender Value
20.23 Crore
Estimated cost
Bid Submission
19 Dec 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jajpur → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing First And Last Mile Connectivity Of 3.5 Km Long 2-Lane To 4-Lanewith Drain From Visa Square To Jsl Material Gate (Utility Corridor-Ii) In Kalinganagar Industrial Complex(Knic) Dist-Jajpur,
BOQ
| Sl. No. | Item Description |
| 1 | Road:- Earth work in Embankment.Excluding GST |
| 2 | Supplying filling sand on road surface.Excluding GST |
| 3 | Providing granular sub-base by coarse graded granular sub-base Grading-II as per table 400-2 as per directedEngineer-in-charge.Excluding GST |
| 4 | Providing and laying wet mix macadam.as per directedEngineer-in-charge.Excluding GST |
| 5 | Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5 per centby weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 507 complete in all respects.as per directedEngineer-in-charge Excluding GST |
| 6 | Providing and Laying Bituminous Concrete. |
| 7 | Providing primer coat @ 0.6kg/sqm using bituminious emulsion . |
| 8 | Providing and laying tack coat with bitumen emulsion . |
| 9 | Painting 2 Coats Synthetic enamel paint over a coat of primer (Over Wood work) |
| 10 | Road marking with Hot applied Thermoplastic compound(Out put for 600Sqm).Edge marking Excluding GST |
| 11 | Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 50 mm thick in PCCM20 grade, sloped towards the kerb, kerb stone with channel laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408. |
| 12 | RCC Drain:-Earth work excavationin hard soil/ Gravelly soil in foundation trenches within the initial lead and liftetc. compRetaining Wall as per the direction of the Engineer-in-charge .Excluding Gst. |
| 13 | Providing and filling sand in foundation & plinth complete.Excluding Gst. |
| 14 | Providing, Lifting, Hoisting & Laying P.C.C (1:3:6) with 4 cm size h.b.h.g metal including all cost usingscreened & washed sharp river sand for mortar and b.h.c.b.g stone metal (of reqd quantities) from weathered skinsof approved for 28 days & finishing the exposed surfaces smooth providing grooves or beads wherever reqd for the workincluding, loading, unloading, stacking, royalities & taxes of all materials, cost of all labours, T&P reqd for the work etc. complete in all respect and placing in proper positionas per directedEngineer-in-charge.Extra Gst |
| 15 | Providing and laying M-30using 20mm downgraded chips in Drain bed,Drain wall,Drain cover slab,Excluding GST |
| 16 | Providing strong, rigid, leveled and plumbed centering and shuttering to required shape and size for R.C.C. Wall & Fin works in the items mentioned below with wooden or steel centering materials with all necessary bracing, ties and supports for level centering covered with bituminous paper including provision of necessary holes and pockets, electrical conduit pipe, P.H. pipes, fan hooks or boxes, switch board insert plates, clamps and extension bars etc., dismantling and removing the shuttering after the required interval from the date of casting, including cost of all materials, cost of all labour, conveyance, taxes, loading, unloading, sundries, scaffolding, staging, T&P, etc, all complete in all respect as per the direction of the Engineer-in-charge with Drain bed |
| 17 | Drain wall |
| 18 | Cutting, bending, binding and placing of MS bars in position including cost of MS bars and binding wire etc. comp. R.C.C [email protected]/cum |
| 19 | Provding weep holes in Brick/Plain or RCC concreteabutments wing walls , return walls.Excluding Gst |
| 20 | Rcc Single Cell Box Culvert:-Earth work excavationin hard soil/ Gravelly soil in foundation trenches within the initial lead and liftetc. compRetaining Wall as per the direction of the Engineer-in-charge .Excluding Gst. |
| 21 | Providing & laying PCC (1:3:6) in foundation and plinth.as Retaining wall per the direction of the Engineer-in-charge .Excluding Gst. |
| 22 | Providing & filling sand in foundation and plinth. Retaining Wall including, loading, unloading, stacking, royalities & taxes of all materials, cost of all labours, T&P reqd for the work etc. complete in all respect and placing in proper positionas directedEngineer-in-charge.,Excluding Gst. |
| 23 | Providing and laying M-30using 20mm downgraded chips in Base,wall,slab,Aooroch slab,Haunch protion,Parapet,Retaining wall as per the direction of the Engineer-in-charge. |
| 24 | Cutting, bending, binding and placing of MS bars in position including cost of MS bars and binding wire etc. comp. R.C.C [email protected]/cum,as per the direction of the Engineer-in-charge. |
| 25 | Providing filter media with stone aggregate of 45mm size |
| 26 | painting 2coats with synthetic enamel paint over coat primer.as per the direction of the Engineer-in-charge. |
| 27 | Rcc 2(Two) Cell Box Culvert:-Earth work excavationin hard soil/ Gravelly soil in foundation trenches within the initial lead and liftetc. compRetaining Wall as per the direction of the Engineer-in-charge .Excluding Gst. |
| 28 | Providing & laying PCC (1:3:6) in foundation and plinth.as Retaining wall per the direction of the Engineer-in-charge .Excluding Gst. |
| 29 | Providing & filling sand in foundation and plinth. Retaining Wall including, loading, unloading, stacking, royalities & taxes of all materials, cost of all labours, T&P reqd for the work etc. complete in all respect and placing in proper positionas directedEngineer-in-charge.,Excluding Gst. |
| 30 | Providing and laying M-30using 20mm downgraded chips in Base,wall,slab,Aooroch slab,Haunch protion,Parapet,Retaining wall as per the direction of the Engineer-in-charge. |
| 31 | Cutting, bending, binding and placing of MS bars in position including cost of MS bars and binding wire etc. comp. R.C.C [email protected]/cum, as per the direction of the Engineer-in-charge. |
| 32 | Providing fitter media |
| 33 | painting 2coats with synthetic enamel paint over coat primer.in parapet & Sides as per the direction of the Engineer-in-charge. |
AI Tender Summary
Tender Timeline
Dec 06, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedDec 19, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 20, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender