Tender For Construction Of Community Sanitary Complex For Govt Middle School Yarigund
Tender Value
3 Lakhs
Estimated cost
Bid Submission
13 Dec 2022
0 days left
EMD
6000
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
narbal → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For construction Of Community Sanitary Complex For Govt Middle School Yarigund
BOQ
| Sl. No. | Item Description |
| 1 | Engagement of Manual Labour for Clearence of site including Disposal of same.All Complete |
| 2 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed.All kinds of soil |
| 3 | Suppluing and laying of Dry Stone soling hand Packed Tightly Including rammining, watering, including all carriages complete.ncluding Plum Work (1.38 Cum) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form work for :Suspended floors, roofs, landings, balconies and access platforms. |
| 8 | (i) Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)(ii)Extra for brick work with common burnt clay bricks/cement concrete bricks insuperstructure above plinth level upto floor five level |
| 9 | Providing Wood in frames of Doors, Windows, Clearstory, window and other frames, wrought frames and fixed in position: Imported Kail, KD wood Doors Windows |
| 10 | Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, curing, fixing and finishing complete incement mortar 1:3 (1 cement : 3 fine sand) etc. complete excluding plastering of the jambs, sills and soffits. 50 mm thick : Vents |
| 11 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required : 30mm |
| 12 | Providing and fixing of Almunium Fittings: 100 mm tower bolt. |
| 13 | Providing and fixing of Almunium Fittings: 200mm Al Drop.. |
| 14 | Providing and fixing of Almunium Fittings:100mm Handle. |
| 15 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 16 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level : Mild steel and medium tensile steel bars |
| 17 | Filling by Available Excavated Earth (excluding rock) in trunches, Plinth,sides of foundation etc, in layers not exceeding 20 cm in depth, conolidation each deposited layers by ramming and watering lead upto 50m and lift upto 1.5 m. |
| 18 | Supplying and Filling in plinthwith Soling/Nallah Muck Under floors including watering ramming consolidating and dressing complete.inluding all carriages. |
| 19 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate. |
| 20 | 12mm Cement plaster of mix : 1 : 4 ( 1 cement : 4 fine sand) |
| 21 | Providing and placing in position pre cast cement concrete rings of 6 inch width, 1\"-6\" radius and 1.25 inch thickness in soakage and septic tank, including carriage complete job.Septic & Soakages |
| 22 | Providing and placing on terrace (at all floor levels) polythene water storage tank ISI:12701 mashed indicating the BIS license No. with cover and suitable locking arrangements and making necessary holes for inlet, outlet and overflow pipes but excluding all fittings and the base support for tank (Syntax), or equivalent having valid ISI license) complete |
| 23 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion elded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge, PN-16 pipe, Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc :a) 16 mm OD |
| 24 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion elded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge, PN-16 pipe, Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc : b) PN-16 pipe , 20mm OD (SDR-7.4) |
| 25 | Providing and fixing of G.I unions complete with including cutting and making good the walls etc : a) 15mm dia. Nominal bore |
| 26 | Providing and fixing of G.I unions complete with including cutting and making good the walls etc : b) 20mm dia. Nominal bore |
| 27 | Providing and fixing of G.I tanky nipples complete a) 20 mm dia. Nominal bore |
| 28 | Providing and fixing PPR ball valve of approved quality. |
| 29 | Providing and fixing of PVC Prince pipe (Type “B”) in proper gradient in excavated trenches including jointing and refilling the excavated material complete including cost of excavation : a) 100mm dia. Pipe |
| 30 | Providing and fixing of PVC Prince pipe (Type “B”) in proper gradient in excavated trenches including jointing and refilling the excavated material complete including cost of excavation : a) 100mm dia. Pipe b) 75mm dia. Pipe |
| 31 | Providing and fixing of floor trap complete PVC made : a) 100mm dia. |
| 32 | Providing and fixing of PVC flexible connections 100 mm dia. |
| 33 | Providing and fixing following PVC fixtures approved quality.100 mm Size.Door junction |
| 34 | Providing and fixing following PVC fixtures approved quality100 mm Size .Plain bend |
| 35 | Providing and fixing following PVC fixtures approved quality100 mm Size .Collors |
| 36 | Providing and fixing following PVC fixtures approved quality 100 mm Size .Reducers 100 mm to 75 mm. |
| 37 | Providing and fixing following PVC fixtures approved quality 100 mm Size.Cowel |
| 38 | Providing and fixing following PVC fixtures approved quality.75 mm Size : PlainBend |
| 39 | Providing and fixing following PVC fixtures approved quality.75 mm Size : Collars |
| 40 | Providing and fixing 1st quality ceramic glazed tiles conforming to IS: 1375 of minimum thickness 5mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA,, in all colors, shades, except burgundy, bottle green, black of any size as approved by Engineer In Charge in skirting, riser of steps and dodos over 12mm thick bed of cement mortar 1:3 (1 Cement: 3 coarse sand) and jointing with grey cement slurry @3.3 Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete : Toilet |
| 41 | Providing and fixing 1st quality ceramic glazed floortiles 300x300mm (thickness to be specified by the manufacturer) of 1st quality conforming of IS :13755 of NITCO, ORIENT, SOMANY, KAJARIA, or equivalent make in all colors, such as white, Ivory, Grey, Fume Red Brown or as approved by Engineer In Charge over 20mm thick bed of cement mortar 1:4 (1 Cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete |
| 42 | Providing and fixing of water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, 10 liter low level white PVC flushing cistern with manual controlled device (handle lever) confirming to I.S. 7231 Parry ware / Hind ware /Cera with all fittings and fixtures complete including cutting and making good the walls and floors wherever required White vitreous china long pan pattern W, C. pan of size 580mm with integral type foot rests: IndianType |
| 43 | Providing and fixing of water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, 10 liter low level white PVC flushing cistern with manual controlled device (handle lever) confirming to I.S. 7231 Parry ware / Hind ware /Cera with all fittings and fixtures complete including cutting and making good the walls and floors wherever required White vitreous china long pan pattern W, C. pan of size 580mm with integral type foot rests : Europian type |
| 44 | Providing and fixing wash basin (Cera) with CI/MS/ brackets including painting of fittings and brackets, cutting and making good walls wherever required white vitreous china wash basin size 630x450mm with a pair of 15mm C.P. brass taps and 32mm dia. C.P. brass union. |
| 45 | Providing and fixing 600x450mm beveled edge mirror of specified brand mounted on 6mm thick plywood/hardboard including cost of wooden/PVC plugs and CP brass screws : |
| 46 | Providing and fixing PPR brass bib cock of approved quality Parko / Marc ) 15 mm nominal bore. |
| 47 | Providing and fixing PPRLong bend of approved quality.40mm |
| 48 | Providing and fixing PPRbrass angle valve of approved quality Parko / Marc) : 15 mm Nominal Bore. |
| 49 | Providing and fixing C.P.Gratings of approved quality. |
| 50 | Providing and fixing soap dishes of approved quality. |
| 51 | Construct brick masonry man hole in cement mortar 1:4 (1 cement: 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 Coarse sand : 4 graded stone aggregate 20mm nominal size) foundation concrete (1:4:8) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cementand making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal sizefinished witha floating coat of neat cement complete : a)size 300x300x300 mm. |
| 52 | Applying Priming Coaton wood Work |
| 53 | Applying Painting on wood Work |
| 54 | Carriage of stone aggregate 20 mm average lead 5 kms by MT. |
| 55 | Carriage of Sand from average lead 10 kms by MT. |
| 56 | Bricks from nearest source to site average lead 10 kms by MT. |
| 57 | Provision for phothgraphes, signboards and other unforeseen items. |
AI Tender Summary
Tender Timeline
Dec 05, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedDec 13, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 14, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender