|
| 1 | Shroud liner for Clinker Grinder (Male),Material: DIN34CR Mo Ni6Drawing No. 35131/×/0050 (As per sample) |
| 2 | Shroud liner for Clinker Grinder (Female),Material: DIN34CR Mo Ni6Drawing No. 35131/×/0050 (As per sample) |
| 3 | Comb liner for Clinker Grinder (Male),Mat:DIN34CR Mo Ni6Drawing No. 35131/X/0070 (As per sample) |
| 4 | Comb liner for Clinker Grinder (Female),Mat:DIN34CR Mo Ni6Drawing No. 35131/X/0070 (As per sample) |
| 5 | Latern ring for C.G.Size: 169.4X131x20 mm,Material: Brass(As per sample) |
| 6 | Support RingSize: 169.4X131X11.5 mmMat: Brass(As per sample) |
| 7 | Spacer Ring for CGMat: MS(As per sample) |
| 8 | Collar Ring for CG with Grub ScrewMaterial: MS (As per sample) |
| 9 | Walker Seal style-I with eye springSize: 130x170x16 mmMat: Neoprene(As per sample) |
| 10 | Walker Seal style-II with eye springSize: 130x170x16 mmMat: Neoprene(As per sample) |
| 11 | Guide Wheel Assembly of Furnace Bottom Ash Disposal SystemNote: Back cover should be fitted with Allen screw bolt(As per sample) |
| 12 | Roller for Guide Wheel Assembly of SSC with Bush, (in front side of roller hole should match with the roller cover of size 240.4x31.3x170x19 mm, Nos of hole 08 Nos, Dia 10 mm, PCD: 210 mm) Mat: EN-8,(As per sample) |
| 13 | Gasket for Bearing Housing of Stub Shaft ofSSC OD: 575 mm, ID: 445 mm, PCD : 505 mm, Thickness: 5.0 mm, Mat: Neoprene Rubber |
| 14 | Gasket for Stub Shaft of SSC OD: 100mm, ID: 50mm, Thickness: 5mm, Material: Neoprene Rubber(As per sample) |
| 15 | Thrust washer for Guide Wheel Assembly of SSC OD: 160mm, ID: 100mm ,Thickness: 6.0mm, Material: Brass(As per sample) |
| 16 | Bell Housing for hydraulic pump of SSCModel no. PV 15-2R1 EL02 to suit electric motor AEUL180MO4,Mat: Pressure Diecast Aluminium Alloy, (As per sample) |
| 17 | Spray Nozzle for Chain Cleaning for SSCMat: SS-304 (As per sample) |
| 18 | Bell Housing for HP-1 Pump of Ball Mill Working lube oil- Servo mesh SP 460(As per sample) |
| 19 | Pipe Nipple Flanged, dia. 1.1/2both side metallic SS pipe of reducer lube oil system (As per sample) |
| 20 | ISI mark Submersible Sewage Pump connected with motor for dewatering system of Condenser Floor Drain Pit. Specification- Motor: (D.O.L. start), 2Pole, Induction Cont. Rated motor with squirrel cage rotor, Speed: 2850 rpm (Approx.), Rating: 7.5 K.w. current: 15 amp. At 415 volts. Power Supply: 415 Volts, 3Phase, 50 Hz. Power Cable: water/oil proof PVC insulated, double sheathed copper conductor flexible cable 20 meter length. 6 core of size 4 core 2.5 square mm + 2 core 1.0 square mm. Pump: Al alloy outer casing, strainer SS-304 with 30 mm X 10 mm rectangular holes. Pump discharge: 500-1200 LPM, Total Head: 20 meter (Approx.), Outlet: 4 Inch hose (HRC-52-55) Impeller Material: Hardened 410 stainless (HRC-52-55) |
