Military Engineer Services-MES has published Tender For Certain Repairs To Flooring, Tiling, Plastering And Misc B/R Repair Of Water Supply Installation At Zero, First, Second And Third Stage Under Age (I) Lansdowne. Submission Date for this Tender is 12-01-2023. Civil Work Tenders in lansdowne Uttarakhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 16-Dec-2022 | Date Corrigendum | Date | 28-12-2022 |
| 2 | 21-Dec-2022 | 2nd Date Corrigendum | Date | 05-01-2023 |
| 3 | 26-Dec-2022 | BOQ Corrigendum | BOQ | 05-01-2023 |
| 4 | 26-Dec-2022 | Other corrigendum | Other | 05-01-2023 |
| 5 | 27-Dec-2022 | 2nd Other corrigendum | Other | 05-01-2023 |
| 6 | 05-Jan-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 12-01-2023 |
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 2 | M&L for walling of random rubble, uncoursed well bonded, bedded and solidly hearted, stone masonary work built in CM (1:6) complete all as specified and as directed. Note :- Only quantity of PCC bond stone to be deducted from quantity of random rubble masonary. |
| 3 | Description same all as item No. 02 above but except stone complete all as specified and directed. Note :- Old retreived serviceable stone under demolition item shall be used. |
| 4 | Demolition of PCC in ground floorand pavings not exc 15 cm thickness below or above ground levelincluding removal of rubbish out side MOD land complete all as specified and directed. |
| 5 | M&L for PCC (1:4:8) Type D2 (40 mm graded aggre-gate) as in foundations, filling and mass-concretecomplete all as specified and directed. |
| 6 | M&L for rubber moulded coloured glossy finish chequered cement concrete tiles 30cm x 30cm x25mm thick, ISI Marked, set and jointed and pointed in neat cement slurry with grey cement and pigment in floors over and including 15mm thick screed bed in cement mortar (1:4) for following size of tile complete all as specified and as directed |
| 7 | M&L for 75 mm thick PCC (1:2:4) type B2, (40 mm graded stone agg) as in sub base of floor complete all as specified and directed. |
| 8 | M&L for 40mm thick PCC (1:2:4) type B-0, using 12.5 mm graded stone aggregate,as in floor mixed with polymer modified repair mortar (SBR Latex liquid polymer) as per manufacturer direction complete all as specified and directed. Note :- (SBR) Latex liquid polymer will be measured and paid seperately. |
| 9 | M&L for PCC (1:3:6) type C1 (20 mm graded stone aggregate) as in roof kerb, cill, bed block, block for insertion of hold fast of door and window with and including formwork complete all as specified and directed. |
| 10 | Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surfacae not exceeding 40mm to face stone (Lime or sand stone) and dressing of face beds and joints, as specified of random rubble walling, uncoursed or brought upto course complet all as specified and directed. |
| 11 | M&L for raised pointing in cement mortar (1:4) to random rubble masonary uncoursed or brought upto course complete all as specified and directed. |
| 12 | S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length (6Kg/Sqcm pressure rating) and fixwd in retainnig wall as spoutcomplete all as specified and as directed. |
| 13 | M&L for brick work with old size full bricksubclass ‘B’ burnt clay bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed. |
| 14 | Dismantling of wall and ceilingboards ( fibre, pulp insulation etc.) or insulation boards/ slabs/ blankets of any thickness, including cover fillets complete all as specified and directed. |
| 15 | S&F in repairs E-boards, ceiling, 4 mm thick with J framed work with mainTee of size 24 x 28.5 mm made out of PGI sheet .3 mm thick double at web and single at flange, flange coverd with powder coated sheet 0.25 mm thick and wall angle 24 x 24 x .45 mm powder coated for ceiling , ceiling boards 60cm x 60cmx 4mmthick , suspended with GI wire 2mm dia and 2m average length with adjustable hanging device complete including plugging in brick/stone walls with steel rawl plug @ 600 mm C/C Ceiling board shall be pressed to the ceiling tee with staple clips at all four sides and painted with two coats of oil bound distemper incl making good all the disturbed portion complete all as spd & directed by AGE I /Eng-in-Charge. |
| 16 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to storeand rubbish off the premises from MoD land complete all as specified and as directed. |
| 17 | M&L for Non- skid coloured ceramictiles of any design and pattern, 7 to 8 mm thick, of following size exc 0.11 Sqm but n. exc 0.18 Sqm, as in floor etc with and including 15mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622.2006, Group B II with average water absorption between 3% to 6%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 5.0% (Max deviation). Centre & Edge curvature and warpage + 0.50% (Max deviation). Breaking strength 1000 N (Minimum) and minimum 95% tiles shall be free from visible defects complete all as specified and directed. Note:- Shade of the tiles including Colour, design and pattern shall be approved by AGE (I). |
| 18 | M&L for coloured glazed ceramic tiles of any design and pattern, 300x450x 7 to 8mmthick, as in dado etc including 10mm thick rendering in CM (1:4), set and jointed in neat cement slurry and pointed in white of coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, Group B III with average water absorption between 10% to 15%. Length, width and straightness of sides + 0.20% (Max deviation). Thickness + 4.0% (Max deviation). Straightness of sides and Rectangularity +0.15% (Max Deviation). surface flatness + 0.22% (Max deviation). Breaking strength 500 N (Minimum) and minimum 95% tiles shall be free from visible defects complete all as specified and directed. Note: Shade of the tiles including Colour, design and pattern shall be got approved by AGE(I) |
| 19 | Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) of following size complete all as specified and directed:- Area not exc 1.5 sqm each |
| 20 | Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) of following size complete all as specified and directed:- Area exc 1.5 sqm but not exc 4 sqm each |
| 21 | M&L for 30mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter comprising of virgin polymer of K-value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws complete all as specified and directed. Note: stainless steel butt hinges and necessary stainless steel screws shall be paid separately. |
| 22 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows and other frames/ chowkhat of size 100mm x 65mm comprising of virgin PVC polymer having K-value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) and 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and direction. Note: (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable andvariation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. (ii) M.S. hold fast/ lugs or SS dash fasteners shall be measured and paid for separately. |
| 23 | S&F MS butt hinge, medium weight, cold rolled and fixed of 100mm size complete all as specified and directed. |
| 24 | S&F extruded aluminium alloy handles, fabricated type, anodised (ISI marked) of 150mm size complete all as directed and specified. |
| 25 | S&F anodised aluminium sliding door bolt (ISI marked) with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of 300mm long size complete all as specified and directed. |
| 26 | Dismantling of posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion from disturbed ground and making good disturbed ground complete all as specified and directed. |
| 27 | Dismantling of fencing wire mesh, anytype complete all as specified and directed. |
| 28 | S&F mild steel flat 40mm x 6mm thick as in wind tie & fastener and securing with J-hook or nut and bolts complete all as specified and as directed. |
| 29 | Fixing only Chain link fencing in patch incl line wires any mesh size and type to any type of standard rail ,staining bolts etc incl provn of binding wire complete all as specified and directed. |
| 30 | Supply only Chain link MS glavanised fencing any size or type as required at site complete all as specified and directed. |
| 31 | Supply only mild steel round bars 8 to 10mm dia and over as in tighting of chain link fencing including cutting to shape, necessary drilling, bolting etc Fe-410-W (Gde E-250) quality -A or Fe 290 (Gde-E-185)complete all as specified and directed. |
| 32 | S&F mild steel screw bolts (machine made) 5 to 10mm dia and length of bolt exceeding exc 5cm but n exc 10 cm long with hexagonal or square head at one end and other end screwed or both end screwed, each screwed end to be fitted with washers and one exagonal or square nut complete all as specified and directed. |
| 33 | S&F in repair galvanised, 2 strand, steel barbed wire 2 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts , including,securing or tying at crossings with and Provision of galvanised mild steel wire, staples or steel pins etc. as directed ( each line wire to be measured)complete all as specified and directed. |
| 34 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness in roof coverings complete all as specified and directed. |
| 35 | S&F Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 36 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed . |
| 37 | Dismantling of timber scantling 40 sqcm and over in section, in any position as in unframed work complete all as specified and as directed. |
| 38 | S&F mild steel work as in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 with and including one shop coat of zinc chrominium primer paint complete all as specified and as directed. Note : The rates quoted deemed included for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete. |
| 39 | M&L for 75 mm thick PCC (1:4:8) type D2, (40 mm graded stone agg) as in sub base of floor/ hardstanding/ footpath complete all as specified and directed. |
| 40 | M&L for 60mm thick coloured rubber moulded glossy finish machine pressed precast concrete interlocking paver block,M-35 Grade with pre-polished, coloured/ laquar finish any shape and size, as approved confirming to IS 15658-2006 complete all as specified and directed. |
| 41 | M&L for 30mm thich sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 42 | Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water and removing unseviceable materials out side MoD land complete all as specified and as directed. |
| 43 | M&L for 15mm thick plastering on fair faces of brick wall in two layers, Ist layer 10mm thick CM (1:6), and IInd layer 5mm thick CM (1:4), surface finished even and fair mixed with @ 200ml per bag WPC (liquid type) complete all as specified and directed. Note :- WPC (Liquid type) shall be measured and paid separately as supply only. |
| 44 | M&L for 10mm thick rendering on other than fair faces of brick work or concrete surface in cement plaster (1:6) finished the surface even and fair complete all as specified and directed. |
| 45 | Supply only WPC integral water proofing compound (Liquid type) complete all as specified and directed. |
| 46 | M&L for preparation of old decorated surface of exterior wall by complete removal ofexisting treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two coats of exterior anti fungal acrylic emulsion paint of required shade (wallmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint/ distemper by using roller/ spray machinecomplete all as specied and directed at site by Engineer-in-Charge. Note: (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of distemper.The cost of materials, labour and T&P required for preparation of surface are demand to be included in the rates quoted. (ii)The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor.The authorised applicator of manufacturer shall be got approved from GE/ AGE (I) before commencement of work. (iii)All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv)after carrying out preparation of surface the same shall be got approved from GE /AGE (I) before application of distemper for each building. (v) Before commencing the work, contractor will got the written approval from GE/ AGE (I) for the make and colour / shade (tint). (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor. |
| 47 | M&L for preparation of old painted surface of wood and wooden based material of any description over 10 cm width or girth and applying two coats of synthetic enamel paintcomplete all as specified and as directed. |
| 48 | M&L for preparing newly plastered surfaces of wall and applying three coats ofwhite washcomplete all as specified and directed. Note :-The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per satifaction of Engr-in-Charge.The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted. |
| 49 | Taking up or down steel water tubing (GI Pipe) and connections of 15mm bore complete all as specified and as directed. |
| 50 | Taking up or down steel water tubing (GI Pipe) and connections of 20mm bore complete all as specified and as directed. |
| 51 | S&F galvanised steel water tubing (GI pipe), medium grade with all fittings (ISI Marked) and fixed to wall, floor and ceiling or laid in trenches of 15mm bore complete all as specified and as directed :- |
| 52 | S&F galvanised steel water tubing (GI pipe), medium grade with all fittings (ISI Marked) and fixed to wall, floor and ceiling or laid in trenches of 20mm bore complete all as specified and as directed. |
| 53 | S&F Providing and fixing windows & ventilators fabricated from Rolled Formed GI Section made of Galvanised steel colour coated(PPGI Sheets) (Base steel as per IS 513 ‘’D’’ quality. Galvanised as per IS 277 with Zinc of 90 Gsm/SqMt w. PAINT: Pre-Painted sections should be with primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder upto 50-60 microns thick.GI Section of 0.58mm thick inDouble rebate windows in which both glazed shutter andflymesh shutter, 74 X 60mm outer frame , Mullion 72 x 49mm, Glazed shutter 48 x 22mm, Flymesh 41 x 22mm, Beading with round ends for Glass Fixing 12 x 12mm in fixed portion and the outer frame and mullions to have rebate for glazed/gauzed shutters the sections cut to length metre joined with corner PolyVinylChloride brackets centre mullion fixed with PolyVinylChloride Mullion caps . Glass of 4mm thick plain float glass fitted with Ethylene Propylene Diamine Monomer in glazed shutterand wiremesh of Stainless steel of 36 guage to fix mesh in mesh shutter using VC Black Gypsum Drywall screws and Spoon profile of 0.58mm GI Sheet. Corners of the windows should be joined with corner brackets made of polyvinylchloride with crca of zinc phosphate coat.Each glazed shutter and fly mesh shutter shall be provided with SS Pivot Hinges 2 in each,PolyVinylChloride handle 1 in each and Powder coated Peg stay in Glass shutter.Window shall be provided with Powder coated MS Grill/Guard Bars made of 10mm MS Sq Bar welded to 6 x 12mm MS Flat with countersunk holes at both vertical ends . Gap between the bars should not be more than 150mm .Window frames shall be fixed to brick / concrete masonry by using nylon self expension caps & 75/100 mm MS screwsafter drilling in walls. VC Black Gypsum Drywall screws should be used while fixng corner brackets,stay,hinges,mullion caps of windows. . Windows to be procured from any of the below mentioned companies- (i)_Ashwani and sons, 1246/2 Meerut Road,Morta, Murad nagar-201003 (ii)TATA Steel-Mumbai (iii)Jindal,2-32,Gurgaon, Haryana-122001 (iv) Ashish Industries, R-4/66, Raj Nagar, Ghaziabad , Ph-9891542779 |
| 54 | Dismantling of water storage tank and removing from the site of Capacity exc 250 Ltr but not exc 500 Ltr of tank completeall as specified and as directed. |
| 55 | S&F rotational moulded polyethylene water storage tank, double layer construction, ISI mark (cylindrical vertical with closed top) hoisted and fixed in position of Capacity 500 Ltrs of tank completeall as specified and as directed. |
| 56 | S&F in repair ball valve high pressure ofPTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipes or brass ferrule and fixed of 20mm bore size complete all as specified and as directed. |
| 57 | S&F in repair vitreous china squatting pan of “Orissa” pattern of size 580 mmx 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and as directed. |
| 58 | S&F in repair PVC valveless, symphonic action type low level flushing cistern white with inlet ball valve, float and handle including brackets, 10 ltr capacity complete with flush pipe(Long bend) 32mm dia of make as approvrd by GE complete all as specified & directed. MAKE: Parryware, Model E8090 SLIMLINEor equivalent model of make as specified in appendix. |
| 59 | S&F PVC connection 15 mm size with PTMT nut of 450mmm length complete all as specified and directed. |
| 60 | S&F in repair 15 mm bore bib taps, chromium plated, fancy type, long body, cast copper alloy with crutch handle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed . |
| 61 | S&F in repairs 15mm bore Stop valves , cast copper alloy, fancy type, chromium plated with long shank and cupscrewed down high pressure with crutch or butterfly handleor concealed screwed both ends for iron pipe or for unions complete all as specified and directed. Note for all CP item :- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
