|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq. m. on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in charge _ All kinds of soil |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 8 graded stone aggregate 40 mm nominal size Recycled Aggregate (RA) |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Mild steel and Medium Tensile steel bars [Jindal/Tata/Rathi/SAIL] |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform |
| 8 | 12mm cement plaster of mix. Ratio 1:4(1Cement: 4 Fine sand) Internal & External face of wall |
| 9 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 10 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work [Dulex/Asian] |
| 11 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre[Dulex/Asian] |
| 12 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps atjunctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) :Powder coated aluminium minimum 16 gauge and section size 4’’X2 6/8’’a) Door frame and fixing of ACP 6mm & Laminated board 12 mm with accessories (Tar bolt, Handle & hanger 6 pin) |
| 13 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sq m including grouting the joint with white cement & matching pigments etc. complete.Size of tile -600 X 600 mm [Johnson / Kajaria] |
| 14 | Providing and fixing 1st quality Rectified wall tiles of size 60X45cm or more conforming to IS 15622(thickness to be specified by the manufacturer), of approved make , in all colours, shade except white, Ivory, Grey, Fume Red Brown etc. of any size as approved by Engineer in charge, in wall over 12mm thick bed of cement mortar 1:3 (1 cement: 3coarse sand) and jointing with grey cement slurry @3.3k g per sqm, including pointing in white cement mixed with pigment of matching shade complete (required if any ) [Johnson / Kajaria] |
| 15 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 16 | Supply and filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. [Cera / Hindware] |
| 17 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
| 18 | Providing and fixing white vitreous china flat back or wall corner typelipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flushpipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting andmaking good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 19 | Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. (Jaquar/Mark/Astra/Equivalent) |
| 20 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms |
| 21 | Providing and fixing C.P. brass bib cock of approved quality conformingto IS:8931 :(Jaquar/Mark/Astra/ Equivalent) |
| 22 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore |
| 23 | Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of approved make and quality as per direction of Engineer-in-charge. |
| 24 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length |
| 25 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 25mm nominal bore, weighing not less than 62 gms |
| 26 | Providing and fixing toilet paper holder : C.P. brass [Jaquar / Mark / Astra] |
| 27 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreouschina flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (brand CERA, Hindware) |
| 28 | Supplying and Installation of Automatic Hand Drier (230 V, AC, 1500 - 1800 W) as required [AVRO / dolphy] |
| 29 | Supplying and Installation of Tissue paper Box as required [dolphy] |
| 30 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular tank shape (Capacity 1000 ltr) (brand Sintex ) |
| 31 | Providing and fixing PVC 6 Kg soil, waste & Vent pipe (Finolex , Prince etc)a) Pipe dia 110 mm with fittings |
| 32 | Providing and fixing PVC 6 Kg soil, waste & Vent pipe (Finolex , Prince etc)a) Pipe dia 90 mm with fittings |
| 33 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 20 mm. nominal size dia pipes [Astra/Finolex/Supreme/Prince] |
| 34 | Supplying and spraying of Chlorpyrifos 20% EC as required.[Darsban] |
| 35 | 10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat: With common burnt clay F.P.S.(non modular) brick tile of class designation 10 |
| 36 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) after surface preparation, first layer of slurry of cement @0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. |
| 37 | Providing and laying Ceramic glazed floor tiles of size 300 x 300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. |
| 38 | Painting top of roofs with bitumen of approved quality @ 17 kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : With residual type petroleum bitumen of grade VG -10 |
| 39 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 8 graded stone aggregate 40 mm nominal size Recycled Aggregate (RA) |
| 40 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. |
| 41 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.1) Group C |
| 42 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1) 6 Module (200 x 75 mm.) |
| 43 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1) 8 Module(125 x 125 mm.) |
| 44 | Supplying and fixing of following modular switch /socket on the existing box / cover including connection but excluding modular plate etc. as required.1) 5 /6 A Switch, 1 way |
| 45 | Supplying and fixing of following modular switch /socket on the existing box / cover including connection but excluding modular plate etc. as required.1) 15 / 16 A Switch, 1 way, 1 module |
| 46 | Supplying and fixing of following modular switch /socket on the existing box / cover including connection but excluding modular plate etc. as required.1) 3 pin 5 / 6 A Socket outlet |
| 47 | Supplying and fixing of following modular switch /socket on the existing box / cover including connection but excluding modular plate etc. as required.1) 6 pin 15 /16 A Socket outlet |
| 48 | Supplying and fixing modular blanking plate on the existing modular plate etc as required. |
| 49 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 50 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.1) 25 mm. |
| 51 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.1)32 mm. |
| 52 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel / PVC conduit as required. 1) 3 x 4 sq. mm. |
| 53 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel / PVC conduit as required. 1) 6 x 4 sq. mm. |
| 54 | Supplying & Installation of exhaust fan (metal body) in the existing opening, including making goods the damage, connection, testing and commissioning etc. as required.1) upto 450 mm. sweep |
| 55 | Supply, Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent / LED fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 56 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 1) 6 way , Double door |
| 57 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB vomplryr with connections, teting and commissioning etc. as required. 1) Single Pole |
| 58 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB vomplryr with connections, teting and commissioning etc. as required. 1) Single Pole and Neutral |
| 59 | Supplying and fixing single pole blanking plate in the existing DB complete etc.as required |
| 60 | Supplying of one number PVC insulated and PVC sheathed / XLPE power cable (LT aluminium cable, armoured, underground) of 1.1 KV grade of following size as required. (Havells /KEI / Finolex / Polycab)1) 4 x 16 sq. mm. |
| 61 | Supplying of one number PVC insulated and PVC sheathed / XLPE power cable (LT aluminium cable, armoured, underground) of 1.1 KV grade of following size as required. (Havells /KEI / Finolex / Polycab)1) 2 x 10 sq. mm. |
| 62 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.1) 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 63 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.1)Upto 35 sq. mm. (clamped with 1 mm. thick saddle) |
| 64 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. 1)Upto 35 sq. mm. |
| 65 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. 1)Upto 35 sq. mm. |
| 66 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.1) 2 x 10 sq. mm. (19 mm.) |
| 67 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.1)4 x 16 sq. mm. (28 mm.) |
| 68 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 69 | Supplying and Erection of G.I. pole (3\" dia, 5 m. length with base plate, bracket for street / compound light fitting as required) of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. 1) Above 4.5 metre and upto 6.5 metre |
| 70 | Supplying, Installation, Testing and commissioning of 45 Watt LED post top uminaire having color temperature 3000 / 4000 / 6000 K, with minimum dimension of dia 590 x 450 mm. made of extruded aluminium and Base should be made from pressure die cast aluminium suitable for dia 60 mm. OD pipe, power coated with epoxy polyester with operational voltage range of 100 - 277 V.Design Patented/Registered, ROHS compliant, BIS Certification for Luminaires & Drives, i/c providing and fixing suitable G.I. reducer for the above said pole and testing, commissioning etc. as required. |
| 71 | Supplying and embedding following dia G.I. pipe (medium class, 2 m. long) in pole collar / foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 1) 32 mm. dia. |
| 72 | Supplying and fixing water proof & powder coated MS street light box of size 300 mm. (h) x 250 mm. (w) x 100 mm. (d), made out of 16 SWG thick MS sheet, with hinged cover and locking arrangements,2 Nos. MS flat clamp of 25 mm. x 3 mm. size, suitable holesin the bottom for entry of 2/3 Nos. cable of sizes 2 x 10 sq. mm.and suitable pipes, including providing and fixing 1 No. 6 A SP MCB of \"B\" series along with its base fixing plate, 2 Nos. Aluminium bus bar of 20 mm. (w) x 5 mm. thick, 100 mm. length with insulator, suitable mounting arrangements, powder coated painting, connection, earthing etc. as required. |
| 73 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel / PVC conduit as required.1) 3 x 1.5 sq. mm. |
| 74 | Painting of following all type of street light / compound light poles with two coats of synthetic enameled paint of superior quality and approved colour after cleaning the surface complete with bracket and fittings including making snowcemon the existing cc collar of the pole and numbering of pole complete as required |
| 75 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required.1) 50 mm. dia |
| 76 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required.1) 80 mm. dia |
| 77 | Installation of Bollard light fitting (upto 2.5\" length) along with all accessories and bulb on the existing foundation including providing gasket on the fitting\"s base plate with fixing, connections, assembling of fitting, testing, commplete as required. |
| 78 | Supplying and fixing 100 mm. dia PVC pipe, 6 Kg. pressure, ISI marked, 40 cm. long with bend for entry of cable including providing and fixing one number MS sheet plate of size 40 mm. (wide) x 150 mm. (length) x 2 mm. (thick) with suitable holes for entry and exit of cable of size2 x 10 sq. mm, 5 way 32 A connector etc. as required. |
