Tender For Construction Of One Additional Classroom At Ghs Airwan
Tender Value
9.90 Lakhs
Estimated cost
Bid Submission
09 Dec 2022
0 days left
EMD
19800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nagri → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of One Additional Classroom At Ghs Airwan
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil. |
| 2 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with: (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 4 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 infoundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 5 | Extra for brick work with common burnt clay bricks/cement concrete bricks insuperstructure above plinth level upto floor five level |
| 6 | Half brick masonry with common burnt clay (non-modular) bricks of class designation7.5 in foundations and plinth including curing inCement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 7 | Extra for half Brick masonry in superstructure above plinth level upto floor V level |
| 8 | Providing and laying in position specified grade of reinforced cement concrete includingcuring but excluding the cost of centering, shuttering, finishing and reinforcement. Allworks upto plinth level1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete above plinth level |
| 11 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stoneaggregate) finished with a floating coat of neat cement including cementslurry and curing complete, but excluding the cost of nosing of steps etc.complete.50 mm thick with 20mm nominal size stone aggregate |
| 12 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mmnominal size well rammed and consolidated and grouted with fine sand including finishingthe top smooth and curing complete |
| 13 | Supplying and filling in plinth with fine sand under floors including watering,ramming consolidating and dressing complete |
| 14 | 12mm Cement plaster of mix:1 : 6 ( 1 cement : 6 fine sand) |
| 15 | 15mm Cement plaster on the rough side of single or half brick wall ofmix:1 : 6 ( 1 cement : 6 coarse sand) |
| 16 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 17 | Filling available excavated earth (excluding rock) in trenches, plinth, sides offoundations etc. in layers not exceeding 20 cm in depth, consolidating each depositedlayer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns |
| 19 | Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platforms. |
| 20 | Centering and shuttering including strutting, propping etc. and removal of form for:Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 21 | Centering and shuttering including strutting, propping etc. and removal of form for:Edges of slabs and breaks in floors and walls |
| 22 | Centering and shuttering including strutting, propping etc. and removal of form for columns, pillars, piers, abutments, posts and struts. |
| 23 | Providing wood work in frames of doors, windows, clerestory windows andother frames, wrought framed and fixed in position with hold fast lugs or withdash fasteners of required dia and length (hold fast lugs or with dash fastenersshall be paid for separately):Second class kail wood |
| 24 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size withnecessary screws, excluding panelling which will be paid for separately, allcomplete as per direction of Engineer-in-charge.Second class deodar wood |
| 25 | Providing and fixing panelling or panelling and glazing in panelled or panelledand glazed shutters for doors, windows and clerestory windows (Area ofopening for panel inserts excluding portion inside grooves or rebates to bemeasured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick.Plain particle board flat pressed, 3 layer or graded wood particle boardmedium density Grade I, IS : 3087 marked |
| 26 | Providing and fixing glazed shutters for doors, windows and clerestory windowsusing 4mm thick float glass panes including ISI marked M.S. pressed butthinges bright finished of required size with necessary screws.Second class deodar wood |
| 27 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze ofaverage width for aperture 1.4 mm in both directions with wire of dia. 0.63 mmfor doors, windows and clerestory windows with ISI marked M.S. pressed butthinges bright finished of required size with necessary screws as per direction ofEngineer-in-chargeSecond class deodar wood |
| 28 | Steel work welded in built up sections/framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates andsimilar works. |
| 29 | Painting with synthetic enamel paint of approved brand and manufactureto give an even shade. Two or more coats on new work |
| 30 | Distempering with 1st quality acrylic distemper (ready mixed)havingVOC content less than 50 gms/litre, two or more coats on new work ofapproved manufacturer, of required shade and colour complete as permanufacturer’s specifications |
| 31 | Finishing walls with water proofing cement paint of required shade onNew work (two or more coats applied @ 3.84 kg/10sqm) |
| 32 | Providing and fixing Anodised Aluminium handles 100 mm |
| 33 | Providing and fixing Anodised Aluminium tower bolt 100x10mm |
| 34 | Providing and fixing Anodised Aluminium tower bolt 200x10 mm |
| 35 | Providing and fixing Aluminium door stopper single rubber stopper |
| 36 | Providing and fixing Anodised Aluminium sliding door bolt 250x16 mm |
| 37 | Wiring for circuit / submain wiring along with earth wire with following size of FRLS PVC insulated copper conducter single core cable in surface/recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 |
| 38 | Wiring for circuit / submain wiring along with earth wire with following size of FRLS PVC insulated copper conducter single core cable in surface/recessed medium class PVC conduit |
| 39 | suppling and fixing suitable size G.I box with modular plate and cover in front on surface including Providing and fixing 6 pin 5/6& 15/16A modular socket outlet and 15/16 a modular switch , connection as required |
| 40 | Providing and fixing modular 5/6 amp switch |
| 41 | Providing and fixing modular 15/16 amp modular switch |
| 42 | Providing and fixing 6 pin 15/16 amp socket outlet |
| 43 | Providing and fixing 3 pin 5/6 amp socket outlet |
| 44 | Providing and fixing angle batten holder including all connections |
| 45 | Supplying and fixing 9w led batten bulb |
| 46 | Supply of exhaust fan wall/ceiling fan 230 V 50 Hz ceiling fan with double ball bearing with low power consumption 1400 mm with ceiling fan |
| 47 | Supply and fixing 25mm square core aluminium cable |
| 48 | Providing and fixing pvce 75mm diameter |
| 49 | Carriage of cement from 5 km by MT |
| 50 | Carriage of sand and bajri from 7 km |
| 51 | Carriage of stone aggregate from 7km |
| 52 | Carriage of brick from 4 km |
| 53 | Carriage of steel from 5 km |
| 54 | Providing and making CIB of approved size by way of making another layer of 12 mm thick plaster with 1:4 cement mortar on front side outer plastered surface, painting and writings as per the direction of engineer in-charge including supply of materials, carriages all complete. L.M.R. |
AI Tender Summary
Tender Timeline
Dec 03, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedDec 09, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 09, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender