Supply Materials For Development Works In Doddabala Gp Under The Mahatma Gandhi National Rural Employment Guarantee Act ( Nrega ) , Add Sundries Charges At 1 % On Material, Miscellaneous / Unforeseen Charges Which Are Necessary During Execution., Broken Stone Aggregate 40 Mm Size, Broken Stone Aggregate 20 Mm Size, Broken Stone Aggregate 12 Mm To 10 Mm Size, Coarse Sand ( Zone Iii ) , Portland Cement, Mixer ( Concrete ) - 1 Cum Capacity, Add Watering Charges At 1 % On Material, Add 24% Centering Charges ( Since Centering Area Increased ) , Jungle Wood Runners And Planks, Silver Oak Or Equivalent Planks 38 Mm Thick, Casurina Poles 100 - 150 Mm, Add Handling , Loading And Unloading At 2% On Material, Add Sundries Charges At 2 % On Material, Size Stone 20 X 20 X 25 Cms, Bond Stone 20 X 20 X 45 Cm, Boulders, Mixer ( Concrete Small Used In Culvert ) , Add Sundries Charges At 1 % On Labour, Add Watering Charges At 1 % On Labour, Burnt Bricks Class 35 ( Non Modular ) , Add Handling , Loading And Unloading At 1% On Material, Add Providing And Removing Scaffolding At 3% On Labour, Enamel Metal Paint, Add Brush At 1% On Cost Of Paint, Painter Class I, Ms Angle Iron 50Mm X 50Mm X 6Mm, 33.8 Metre In Length At 4.5 Kg Per Metre, Ms Angle Iron 40Mm X 40Mm X 6Mm, 23 Metre In Length At 3.5 Kg Per Metre, Gusset Plates 6 Mm Thick, Base Plate / Base Plate, Anchor Bolts 750Mm, Corbon Electrodes, Welder Grade I, Hom Of Welding And Grinding Machine, Add, Hom Of Cutting And Grinding Machine, Ready Mix Primer Paint ( Ready Mix Red Lead Paint ) , Add Wire Brush, Fine Steel Wool, Putty, Sand Paper, At 3% On Cost Of Paint, Tools & Plants And Electrical Charges @2%, Weld Mesh 75 X 25 Mm Of 6G To 10G, Unit Cost As Per The Specification, Tmt Bars Fe 500, Binding Wire, Indian Type Water Closet Of Size 580 Mm Of Specified Make With Footrests, 100Mm S Or P Trap, Mason Class I ( With Tools ) , Add White Lead Paint, Gasket, Cement, Sand For Making Good The Wall And Floor At 2% On Material, Plasticizer / Super Plasticizer, Hom Of Vibrator 0.71 Days, Cost Of 6.5Mm M.S. Coil, Fabrication Charges., Transportation Charges Of Materials Beyond 5 Km @ 10%, Labour Charges For Handing Errection Of Rcc Rings Etc. @ 5%, Rcc Cap 1000 Mm Dia, 100 Mm Thick, Pvc Pipe Of 10Kg Cum, 90 Mm, The Cost Of All Materials, Centering, Transportation, Fixing, Wastage And Other Extra Charges Etc, Excluding The Cost Of Unskilled Labour.
