Military Engineer Services-MES has published Tender For Misc Repairs/ Replacement To Roof Treatment Grit Plastring Gunniting Roof Ac Sheet Chhajja-Facia Trusses Windows Joinery And Other Connected Misc Works At Base Hospital Under Ge (E/M) Bhdc-10. Submission Date for this Tender is 30-12-2022. Construction Material Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 23-Dec-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-12-2022 |
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar including all quoins, pillars etc, complete all as specified and as directed. |
| 2 | M&L brick work with sub class B bricks straight or curved on plan exc 6 metre mean radius, built in cement mortar 1:6 complete all as specified and as directed. |
| 3 | Taking down cement plaster on brick or stone walls etc. including raking out of joints, hacking for key, scrubbing down with water etc. of any description complete all as specified and as directed. |
| 4 | M&L 15mm thick renderingin cement mortar 1:6 onbrick or concretesurfaces of walls, finished the surfacefair and even without using extra cement complete all as specified and as directed. |
| 5 | M&L 15 mm thick renderingin cement mortar (1:4),on brick or concrete wall surface, mixed with water proofing compound @ 2% by weight of cement, finished fair & even without using extra cement complete all as specified and as directed. |
| 6 | M&L 10 mm thick renderingin cement mortar (1:3)on ceiling surface, finished even & smooth without using extra cement complete all as specified and as directed. |
| 7 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed. |
| 8 | M&L 25 mm thick PCC 1:2:4, Type B1, using 20 mm graded stone aggregate, below tiles for levelling of existing surface complete all as specified and as directed. |
| 9 | M&L 7 to 8 mm thick, Non-skid coloured Ceramic tiles,area of each tile exceeding 0.11 Sqm but not exceeding 0.16 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles, laid over & including 15mm thick screed bed or bedding layer of cement mortar 1:6as in flooringcomplete all as specified and as directed. |
| 10 | M&L glazed coloured ceramic tiles, 350 x 250 x 7 mm/450x350x7mm thick, in vertical surfaces such as skirting/dado etc, set and jointed in cement slurry, laid over & including 10mm thick renderingin cement mortar 1:4, set, jointed and pointed in white cement mixed with colour pigment to match the shade of tilecomplete all as specified and as directed. |
| 11 | Taking down of chowkhat or frame (without taking off shutter from frame) area not exc 1.50 Sqm eachincluding builder hardware fitting complete all as specified and as directed. |
| 12 | All as per item No 11.00 here in Before but area exc 1.50 Sqm & not exc 4.00 Sqm each complete all as specified and as directed. |
| 13 | Taking down shutters of any description area exc 1.00 Sqm but not exc 2.00 Sqm each leaf including builder hardware fitting complete all as specified and as directed. |
| 14 | S&F Framed work as in doors or gates of angle or other section using FE-290 (Gde-E-165) with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 15 | S&F Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 including taking down old guard bars complete all as specified and directed. |
| 16 | S&F 35 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 17 | S&F solid PVC moulded door frame of size 50x47mm, made out of 5mm thick one side prelaminated and other side plain colour PVC sheet & edges will be painted to match with prelaminated sheet, reinforced with MS square tube fixed with screw/plugs to brick walls complete all as specified and as directed. |
| 18 | S&F Factory madeSolid PVC Moulded Door Shutter 28 to 30mm thick (stiles),with 2, 4or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 19 | S&F 100mm size, mild steel butt hinges, cold rolled, medium weight, fixed with Stainless steel screws complete all as specified and as directed. |
| 20 | S&F 100mm size, stainless steel butt hinges, fixed with Stainless steel screws complete all as specified and as directed. |
| 21 | S&F hydraulic door hinges, fancy type, stainless steel, fixed to cup board and similar items complete all as specified and directed. |
| 22 | S&F 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed. |
| 23 | S&F 150mm size extruded aluminium alloy handles, cast type anodised complete all as specified and as directed. |
| 24 | S&F 200 mm long Stainless steel handles, Fancy type and fixed complete all as specified and as directed. |
| 25 | S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 26 | S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed. |
| 27 | S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed. |
| 28 | S&F 3.0 mm sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 29 | S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm, fixed with stainless steel screws complete all as specified and as directed. |
| 30 | S&F in repair 19 mm thick PVC board, grade-2, interior grade, commercial type, fixed with screws to timber framed work including taking down old boarding, as in shelves, shutters, etc complete all as specified and as directed. |
| 31 | S&F in repairs 600 x 450 mm bevelled edged mirror of selected quality mounted on 4 mm thick PVC Sheet with chromium plated brass screw and cup washers complete all as specified and as directed. |
| 32 | Demolition of unreinforced cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 33 | M&L for Cement concrete 1:4:8, Type D-2, using 40mm graded stone aggregate, as in foundation, filling and mass concrete complete all as specified and as directed. |
| 34 | Supply and laying dry river sand for cushioning to interlocking paver blockincluding punning down of sand complete all as specified and as directed. Note: for measurement purpose punned thickness of sand only shall be considered. |
| 35 | M&L for 80 mm thick, Machine pressed precast concrete interlocking rubber moulded paver block any shape, colour and size confirming to IS 15658-2006, M-40 Grade, with grey cement and pigmentcomplete all as specified and as directed. |
| 36 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 37 | Dismantling of timber scantling of any size and shape complete all as specified and as directed. |
| 38 | S&F mild steel rolled sections, Framed work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, using FE-290 (Gde-E-165) complete all as specified and directed. |
| 39 | S&Fin repair, in position Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50mm thick of approved colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, Chajja etc fixed with self tapping screws as specified, high tensile alloy steel trap sheet having 55 MPA yield strength and zinc (galvanized ) + Aluminium combined, coating of 150 GSM /PM2(AZ-150) of 50mm TCT having top colour coat of regular modified polyester/silicon modified polyester/HDEP polyester of 18 to 20 micron and back coat of 5 to 7 micron Epoxy primer fixes,RMR 1040 profile width 1125 mm complete all as specified & as directed. |
| 40 | All as per item No 39.00 here in before but plain sheet as in ridge/valley/gutter complete all as specified & as directed. |
| 41 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and frame worketc completeall as specified and as directed. |
| 42 | S&F Gl powder coated frame work, grid size 605x605mm, for seamless ceiling, comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm, fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having knurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified and as directed. |
| 43 | S&F G.I. Hangers, 6 mm dia,(up to 1200mm length) adjusting level, fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size, 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed. |
| 44 | S&F 4.00 mm thick Non asbestos fibre cement building boards (E board) designer Pattern fixed or laid/ inserted to timber/GI/Aluminium frame work with screws complete all as specified and as directed. |
| 45 | M&L in repair 20mm thick Granite slab (of any type) work (table rubbed and polished), in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & half curving the edges of granite stone slab, over and including 20mm thick screed in cement mortar 1:6 including demolition of old stone slab complete all as specified and as directed. |
| 46 | S&F in repair 3.0 mm sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 47 | S&F in repair stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm, fixed with stainless steel screws complete all as specified and as directed. |
| 48 | M&L preparation of new plastered wall surfaces and applying two coats of Oil Bound Distemper over and includinga coat of alkali resistant primer, over and including 3 mm thick cement based wall care putty complete all as specified and as directed. |
| 49 | M&L preparation of new plastered wall surfaces and applying two coats of weather proof Exterior emulsion paint of colour & shade as approved (Colour scheme shall be as approved by the GE & user)over and including a coat of priming paint, over and including 3 mm thick cement based wall care putty complete all as specified and as directed. Make - Asian Apex Ultima or equivalent of make specified in PS. |
| 50 | M&L preparation of new plastered ceiling and applying three coat of white wash complete all as specified and as directed. |
| 51 | M&L for preparation of new or previously untreated wooden surface of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paints over and including one coat of pink primer complete all as specified and as directed. |
| 52 | M&L for preparation of new or previously untreated steel surface of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paints over and including one coat of red oxide primer complete all as specified and as directed. |
| 53 | Taking down/removing existing roof treatment over roof slab including roughening and wire brushing the surface to remove the loose concrete, dust and cleaning the surface complete all as specified and as directed. |
| 54 | M&L water proofing treatment to roofwith polymeric membrane (APP based) with non woven polyester mat as reinforcement with following operations complete all as specified and as directed:- (a) M&L for cleaning the new plastered surface and providing & laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.30 Litre/Sqm on dry and clean surface. (b) M&L for providing & laying APP based polymeric membrane of 3 mm thickness of weight not less than 3.0 Kg/Sqm with non woven polyester fibre as reinforcement on primed surface by torch application with 15 cm end over laps & 10 cm side over laps etc as per manufacturers instruction. (c) M&L for finishing of top surface by applying two coats of aluminium paint complete all as specified and as directed. |
| 55 | M&L 25 to 30 mm thick machine cut Kota stone flooring, laid over and including 20 mm thick screed bed or bedding layer incement mortar 1:6 for laying floor finished, jointed and pointed with grey cement slurry mixed with pigments to match with the shade of Kota stone including rubbing and mirror polishing complete all as specified and as directed. |
| 56 | All as per item No 55.00 here in before but as in raiser of steps, skirting/dado and pillar, laid over and including 10 mm thick rendering in cement mortar 1:4including demolition of old skirting/dado etc complete all as specified and as directed. |
| 57 | M & L for washed stone grit plaster on exterior walls in two layers, under layers 12 mm thick cement plaster 1:4 (1 cement :4 coarse sand) following the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer with 15 mm thick cement plaster 1:1/2:2 (1 white cement: 1/2 coarse sand:2 coloured marble stone chipping 10mm nominal size) including using Colour pigment & marble powder as required, in panels with groove all around as per approved pattern includingscrubbing and washing the top layer with wire brushes and water to expose the stone chippings complete all as specified and as directed. (Note:Payment for providing grooves shall be made separately under respective item of this Schedule) |
| 58 | M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and as directed. |
| 59 | Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials outside MOD land (As approved by local Municipal Authorities) by manual/mechanical means including loading, transporting and unloading the same complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
