Construction Of Road From Bashbari To Paglijhora , Construction Of Gauripur Jatiya Vidyalaya Road Including 4 Years Of Routine Maintanance Under Mukhya Mantri Pakipath Nirman Aaachani For The Year 2022-23
Tender Value
1.56 Crore
Estimated cost
Bid Submission
20 Dec 2022
0 days left
EMD
3.12 Lakhs
Bank guarantee accepted
Document Fee
3120
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gauripur → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Road From Bashbari To Paglijhora , Construction Of Gauripur Jatiya Vidyalaya Road Including 4 Years Of Routine Maintanance Under Mukhya Mantri Pakipath Nirman Aaachani For The Year 2022-23
BOQ
| Sl. No. | Item Description |
| 1 | Construction of road from Bashbari to Paglijhora Clearing and grubbing road land including oprooting wild vegetation ,grass ,bushes,shrubs ,saplings and trees of girth up to 300mm,removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or autioned upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness as per specification clause 201 (ii) By mechanical means (A) In area of non thorny jungle |
| 2 | Providing and fixing of typical PMGSY informatory sign board with logo as per MORD soecifications and drawing .Three MS plates of 1.6mm thick ,top and middile plate duly welded with MS flat iron 25x5mm size on back edges .The lower plate will be welded with MS angle iron frame of 25mmx25mmx5mm .The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos .75mmx75mm of 12SWG Sheet tubes posts duly embedded in cement concrete M15 gradeblocks of 450mmx450mmx600mm,600mm below ground level.The top most diamond plate will be welded to middile plate by 47mmx47mmof 12SWG steel tube.AllM.S. will be stove enameled on both sides.Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All sections of framed posts and steel tube willbe painted wityh primer and two coats of epoxy paint as per drawing clause 1701 and Annexure 1700.1 |
| 3 | Setting out Typical bench mark as per drawing 200.1 |
| 4 | Reinforced Cement concrete M15 grade Kilometre stone/local of Standard design as per IRC :8 fixing in poition including painting and printing etc as per drawing and technical specifications clause 1703(ii) Ordinary Kilometre Stone (Precast) |
| 5 | Reinforced Cement concrete M15 grade Kilometre stone/local of Standard design as per IRC :8 fixing in poition including painting and printing etc as per drawing and technical specifications clause 1703(III)200m Stone |
| 6 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 (I)Private Land |
| 7 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. Private Land |
| 8 | Construction of granular sub-base by providing well graded material,spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with smooth wheelroller to achieve the desired density, complete asper Clause 401. II) For Grading IIMaterial |
| 9 | Providing , laying, spreading and compacting stone aggregates of specified sizes to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with 3 wheels80-100KN static roller in stagesto proper grade and camber, applying and brooming stonescreening / binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause 405.(2) Grading - II (Screening B).A) By Manual MeansIII |
| 10 | Providing , laying, spreading and compacting stone aggregates of specified sizes to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with 3 wheels80-100KN static roller in stagesto proper grade and camber, applying and brooming stonescreening / binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause 405.(3) Grading - III (Screening B).A) By Manual Means |
| 11 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 |
| 12 | Providing and applying tack coat with Bitumen emulsion (RS-1)using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 13 | Semi - Dense Bituminous Concrete: Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5% of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.508. complete in all respect. including carriage of mixed materials up to 10.0 Km initial lead from mixing plant ) (Including cost of testing of materials at site and laboratory as directed by the deptt.)\"With hydrated lime/ cement as filler (refer table 500-9 of MoSRT&H specification)for Grading II (10 mm nominal size), Rate as per Annexure-III,Qty as per annexure-IV |
| 14 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications(Considering 80% length) |
| 15 | Painting of speed breaker |
| 16 | Providing and fixing retro reflectorised cautionery, mandatory and informatory sign as per IRC:67 made encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75mmx 75mmx 8mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concreyte 450mmx450mmx600mm below ground level as per drawings and technical specification Clause 801. 600mm equilateral triangle |
| 17 | Providing and fixing retro reflectorised cautionery, mandatory and informatory sign as per IRC:67 made encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75mmx 75mmx 8mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concreyte 450mmx450mmx600mm below ground level as per drawings and technical specification Clause 801.600mm circular |
| 18 | Providing and fixing retro reflectorised cautionery, mandatory and informatory sign as per IRC:67 made encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75mmx 75mmx 8mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concreyte 450mmx450mmx600mm below ground level as per drawings and technical specification Clause 801.800mm x 600mm rectangular |
| 19 | Earth work in excavation for structure as per drawing and technicalspecifications clause 305.1 including setting out,construction of shoring and bracing ,removal of stumps and other deleterious materials and disposal up to a lead of 50m , dressing of sides and bottom and backfilling in trenches with excavated suitable material Ordinary Soil up to 3m depth |
| 20 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specifications clause 802,803,1202 & 1203 .With crushed stone PCC grade M10 ,Nominal mix 1:3:6 |
| 21 | Providing concrete for plain /reinforced concrete in open foundations complete as per drawings and technical specifications clause 802,803,1202 & 1203 B.With natural gravelIII)PCC M20 , Nominal mix |
| 22 | Supplying , fitting and placing TMT (Fe 500 D) reinforcement bar( other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX or equivalent) in foundation complete as per drawings and technical specifications clause 1000 and 1202. |
| 23 | Plain /reinforced cement concrete in Sub Structure complete as per drawings and technical specification clause 802,804,805,806,807,1202 and 1204 B.Withnatural gravel B.PCCGrade M20 |
| 24 | Supplementaryitem no 12.50: Plain /reinforced cement concrete in Sub Structure complete as per drawings and technical specification clause 802,804,805,806,807,1202 and 1204 B.Withnatural gravel B. With natural GravelIV) RCC Grade M20 i) for height up to 5.00m |
| 25 | Supplying , fitting and placing TMT (Fe 500 D) reinforcement bar( other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX or equivalent) insub structurecomplete as per drawings and technical specifications clause 1000 and 1202. |
| 26 | Providing weep holes in Brick masonry/plain/Reinforcedconcrete abutment,wing wall/return wall with 100mm dia AC pipe extending through the full width of the structure with slope of 1V : 20 H towardsdrawing force .Complete as per drawing and technical specification |
| 27 | Back filling behind abutment ,wing wall and return wall complete as per drawing and technical specification ,Granualar material |
| 28 | Providing and laying reinforced cement concretein super structure as per drawing and technical specifications clause 800,1205.4 and 1205.5 with crushed stone RCC grade M25 Height uo to 5m |
| 29 | Supplying , fitting and placing TMT (Fe 500 D) reinforcement bar( other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX or equivalent) insuper structurecomplete as per drawings and technical specifications clause 1000 and 1202. |
| 30 | Construction of RCC railing of M25 grade in cast in situ with 20mm nominal size aggregate true to line and grade ,tolerance of vertical railing post not to exceed 1 in 500, centre to centre to centre spacing between vertical posts not to exceed 2000mm as per drawing and technical specifications clause 800,900 and 1208.3 |
| 31 | Drainage spouts complete as per drawing and technical specification cl 1209 |
| 32 | Providing and laying a buried expansion joint , covered with 12mm thick ,200mm wide galvanised weldable structural steel plate as per IS 2062, Placed symetrical to centre line of the joint, resting freely over the top surface of the deck concrete welding of 8mm dia ,100mm long galvanised nails spaced 300mm c/c along the centre line of the plate as per technical specifications clause 1207.2.3 |
| 33 | Painting two coats on new concrete surface : Painting two coats of ready mix paint including primer coat after filling the surface with synthetic enamel paint in all shades on news, plastered /concrete surfaces as per drawing and technical specifications clause 1701 |
| 34 | RCC Guard post : Supplying , fitting and fixing RCC guard post 150cm long erected 75cm above the ground and 75 cm below the ground with M15 grade (niminal mix 1:2:4 with broken stone aggregate up to 20mm size) of cement concrete and required reinforcement tied in position with annealed black wire including centering , moulding the top, curing including painting concrete surfaces in 23 cm strips up to 0.75m from the top alternately in black and yellow and having 2 nos.reflective band of desired shade etc .complete as per design and as directed b) 15 cm dia RCC guard post with reinforcement of 4 nos,12mm dia TMT main steel bars and 6mm TMT/MS stirrups at 15 cm c/c Qty=4x25.00-100 Nos |
| 35 | Providing and layingboulder apron for bed protection with stone boulders of minimum sise and weight as per table1300.1 no fragment weiging less than 25kg laid dry complete as per drawing and technical specification clause 1301. |
| 36 | Providing and laying cement concrete wearing course M30 grade including reinforcementcompleteas per drawing and technical specifications clause 800 and 1206.3 A With crushed stone |
| 37 | Providing and laying of boulder apron laid in wire crates with 4mm dia GI wire conforming to IS : 280 and IS 4826 in 100mm x100mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulder weighing not less than 25kg as per drawing and technical specification clause 1301. |
| 38 | Providing and laying pitching on slopes laid over prepared filter media as per drawing andtechnical specification clause 1302 ,I Stone /Boulder. |
| 39 | Providing and laying filter material under neath pitching in slopes complete as per drawing and technical specifications clause 1302. |
| 40 | Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification,including setting out,construction of shoring and bracing,removal of stumps and other deleterious matter,dressing of sides and bottom and backfilling with approved material.I. Ordinary soil (b)\"With dewatering \"(i)upto 3 m depth |
| 41 | Prvidingbrick soling in earthen shoulderwith stone/best quality jhama brick, sand packed and laid to true line and level and in panel after preparing the subgrade including earthwork in excavation as directed including all labour and materials and if necessary dewatering, complete. A) Brick on flat soling |
| 42 | Plain/Reinforced cement concrete,in foundation complete as per drawing and technical specification and steel shuttering formwork RCC gr M-20 |
| 43 | Plain/Reinforced cement concrete,in Super structure complete as per drawing and technical specification and steel shuttering formwork RCC gr M-20 |
| 44 | Supplying, fitting and placing TMT bar reinforcement in Foundation complete as per drawing and technical specifications ( B) TMT-IS 1786 (Fe-500 D) Secondary producer (ISI approved) |
| 45 | Supplying, fitting and placing TMT bar reinforcement in Superstructure complete as per drawing and technical specifications ( B) TMT-IS 1786 (Fe-500 D) Secondary producer (ISI approved) |
| 46 | Providing and erecting direction and place identification retro- reflectorised sign , fixed over MS sheeting, 3 mm thick with area exceeding 0.9 sqm supported on a mild steel hollow bar 50x 50x 4 mm supported on 200 mm dia RCC coloumn as per drwaing and detai specification |
| 47 | Lettering and arrow marks on sign board to be provided separately as per actual requirement. Rates for these items have been analysed separately |
| 48 | Plastering with cement morter(1:3) in brick work in sub structure as per technical specification. |
| 49 | Painting two coats including prime coat after filling the surface with synthetic enamel paint in all shades on new plastered/ concrete surfaceas per drawing and technical specification |
| 50 | Construction ofGauripur Jatiya Vidyalaya Road Providing and fixing of typical PMGSY informatory sign board with logo as per MORD soecifications and drawing .Three MS plates of 1.6mm thick ,top and middile plate duly welded with MS flat iron 25x5mm size on back edges .The lower plate will be welded with MS angle iron frame of 25mmx25mmx5mm .The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos .75mmx75mm of 12SWG Sheet tubes posts duly embedded in cement concrete M15 gradeblocks of 450mmx450mmx600mm,600mm below ground level.The top most diamond plate will be welded to middile plate by 47mmx47mmof 12SWG steel tube.AllM.S. will be stove enameled on both sides.Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All sections of framed posts and steel tube willbe painted wityh primer and two coats of epoxy paint as per drawing clause 1701 and Annexure 1700.1 |
| 51 | Making up loss of material/irregularities on shoulders to the design level by adding fresh approved selected soil and compacting it with appropriate equipment at OMC upto a lead of 1000 mas per technical specification Clause 1903(existing width of shoulder is considered 1.00 m) |
| 52 | Scarifying Existing Bituminous Surface to a depth of 150mm and disposal of scarified material with a lift upto 3m and lead up to 1000m as per technical specification clause 301.4 Ch 0.00m to ch 150m |
| 53 | Earthwork in excavation for structures as per drawing and technical specification clause 305.1 including setting out construction of shoring and bracing , removal of stumps and other deleterious material and disposal up to a lead of 50.00m ,dressing of sides and bottom and backfilling in trenches with excavated suitable material I Ordinary soil |
| 54 | Construction of granular sub base by providing well graded material , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with smooth wheel roller to achieve the desired density , complete as per technical specification clause 401 (II) For grading II material in widening portion ,Qty as per annexure-I |
| 55 | Providing , laying, spreading and compacting stone aggregates of specified sizes to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with 3 wheels80-100KN static roller in stagesto proper grade and camber, applying and brooming stonescreening / binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause 405.(3) Grading - III (Screening B).A) By Manual Means- Rate as per annexure-IIIQty as per annexure-I |
| 56 | Providingand laying interlocking concrete block pavement (M40) having thickness 80mm as per echnical specification clause 1504 including carriage., 32 nos block per sqma) including Edge block/Edge restraints,Using block 32 nos/Sqm, Basket Weave design only,Qty as per Annexure-III |
| 57 | Extra cost for for colour CC Block 25%Rate analysis as per annexure-IV |
| 58 | Providing and fixing retro reflectorised cautionery, mandatory and informatory sign as per IRC:67 made encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75mmx 75mmx 8mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concreyte 450mmx450mmx600mm below ground level as per drawings and technical specification Clause 801. 600mm equilateral triangle |
| 59 | Providing and fixing retro reflectorised cautionery, mandatory and informatory sign as per IRC:67 made encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75mmx 75mmx 8mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concreyte 450mmx450mmx600mm below ground level as per drawings and technical specification Clause 801. 600mm circular |
| 60 | Providing and fixing retro reflectorised cautionery, mandatory and informatory sign as per IRC:67 made encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75mmx 75mmx 8mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concreyte 450mmx450mmx600mm below ground level as per drawings and technical specification Clause 801.800mm x 600mm rectangular |
| 61 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial.I. Ordinary soilUpto 3 m depth |
| 62 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203P.C.C grade M 10Nominal mix 1:3:6 |
| 63 | Supplying, fitting and placing TMT (Fe-500 D) reinforcement bar(Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX or equivalent)) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202 |
| 64 | Providing concrete for plain / reinforced concrete in substructure complete as perdrawings and technical specifications Clauses 802, 804, 805, 806, 1202 & 1204PCC Grade M 20Nominial mix (1:2:4) |
| 65 | Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification,including setting out,construction of shoring and bracing,removal of stumps and other deleterious matter,dressing of sides and bottom and backfilling with approved material.I. Ordinary soil (b)\"With dewatering \"(i)upto 3 m depth |
| 66 | Prvidingbrick soling in earthen shoulderwith stone/best quality jhama brick, sand packed and laid to true line and level and in panel after preparing the subgrade including earthwork in excavation as directed including all labour and materials and if necessary dewatering, complete. A) Brick on flat soling |
| 67 | Plain/Reinforced cement concrete,in foundation complete as per drawing and technical specification and steel shuttering formwork RCC gr M-20 |
| 68 | Plain/Reinforced cement concrete,in Super structure complete as per drawing and technical specification and steel shuttering formwork RCC gr M-20 |
| 69 | Supplying, fitting and placing TMT bar reinforcement in Foundation complete as per drawing and technical specifications ( B) TMT-IS 1786 (Fe-500 D) Secondary producer (ISI approved) |
| 70 | Supplying, fitting and placing TMT bar reinforcement in Superstructure complete as per drawing and technical specifications ( B) TMT-IS 1786 (Fe-500 D) Secondary producer (ISI approved) |
| 71 | Providing and erecting direction and place identification retro- reflectorised sign , fixed over MS sheeting, 3 mm thick with area exceeding 0.9 sqm supported on a mild steel hollow bar 50x 50x 4 mm supported on 200 mm dia RCC coloumn as per drwaing and detai specification |
| 72 | Lettering and arrow marks on sign board to be provided separately as per actual requirement. Rates for these items have been analysed separately |
| 73 | Plastering with cement morter(1:3) in brick work in sub structure as per technical specification. |
| 74 | Painting two coats including prime coat after filling the surface with synthetic enamel paint in all shades on new plastered/ concrete surfaceas per drawing and technical specification |
AI Tender Summary
Tender Timeline
Dec 02, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedDec 20, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 21, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender