Military Engineer Services-MES has published Tender For Provision Of Additional Water Supply Line For Base Hospital At Basistha Charali And Add/Altn And Renovation Of Pead. Opd Room, Toilet At Base Hospital Under Ge Guwahati. Submission Date for this Tender is 07-01-2023. Water Pipe Line Tenders in guwahati Assam. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 14-Dec-2022 | AMENDMENT TO BOQ | BOQ | 26-12-2022 |
| 2 | 14-Dec-2022 | DATE CORRIGENDUM | Date | 26-12-2022 |
| 3 | 26-Dec-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-01-2023 |
| 4 | 02-Jan-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-01-2023 |
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as directed. |
| 2 | Demoliation Brickwork masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as directed |
| 3 | M&L Rendering 15 mm thick on other thanfair faces of brick work or concrete surfaces in cement mortar 1:6 for finished even and fair complete all as specified and as directed. |
| 4 | S&F Colour coated Anodised aluminium frame for doors, windows, ventilators, partitionswith one or more rebates including joining cleat for fixing etc. complete all as specified and directed Note:- Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed |
| 5 | S&F Colour coated anodised aluminium doors shutters including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, along with standard locking arrangements, handles, tower bolts etc as required. complete all as specified and directed Note:-(i) Labour charges for fixing of glass/wire guage is inclusive in the unit rate quoted. Glass/Wire Guage/locks shall be measured and paidseperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed |
| 6 | S&F Colour coatedanodised aluminium windows/ventilators/partitionsany type including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, along with standard locking arrangements, handles, tower bolts etc as required. complete all as specified and directed Note:- (i) Labour charges for fixing of glass/wire guage/aluminum grills is inclusive in the unit rate quoted. Glass/Wire Guage/aluminum grills shall be measured and paidseperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed |
| 7 | Supply only 5.5mm thick plain sheet glass, ordinary quality fixed with Aluminum frame workexc 0.5 sqm in each pane complete all as specified and as directed. |
| 8 | Supply only 4mm thick plain sheet glass, ordinary quality fixed with Aluminum frame work n. exc 0.5 sqm in each pane complete all as specified and as directed. |
| 9 | Supply only Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum window/ventilator shutters complete all as specified and as directed. |
| 10 | Supply only, mild steel Mortice lock, vertical type, size 100 mm complete all as specified and as directed. |
| 11 | Supply only aluminium door closer hydraulically regulated designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80Kg and fixed complete all as specified and as directed |
| 12 | M&L factory made PVC internal door frame of size 100mm x 45 mm with a wall thickness of 5mm, made out of extruded 5mm thick PVC sheet of density 600 kg/cmb, and by joining 3nos. Heat bend PVC sheet sections. The inside section of size 90x30mm shall be made from plain color PVC sheet of 5mm thick. The inside section will be covered by sticking two sections of size 30x35mm and 70x45mm made from 5mm thick plain PVC sheet. The frame shall be miter cut at two corners and jointed with 4nos. of 150mm long brackets of 15mm x 15mm MS square tube. The two vertical door frames are to be reinforced with 40mm x 20mm MS tube of 19 gauge through out the frame. The door frame shall befixed to the wall using 8/100mm long MS screws throught the frame by using anchor fasteners. A minimum of 4nos of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc completed all as directed. Make : Rajshri Plastiwood or equivalent as approved by GE from list of approved makes. |
| 13 | M&L 30mm thick factory made moulded PVC door shutter wood free consisting of frame made out of MS tubes of 19 gauge thickness and size of 20mmx40mm for stiles as well as top, bottom and lock rail. M S frame shall have a coat of metal primer of approved make and manufacturer. The inside penal shall consists of 20mm thick multi-chamber hollow PVC section of 1mm wall thickness, bonded using solvent cement/cyanoacrylate adhesive with 5mm thick moulded PVC sheet of density 600Kg/Cbm with 2,4,6 raised panel design in plain/prelam colours after routing the moulded design on one side of the inside panel. 5mm prelam PVC sheet to be pasted using solvent cement/cyanoacrylate adhesive on other side of the hollow PVC section. All the four edge of the panel to be sealed with lipping of 10mm thick & 20mm wide PVC sheet baton (made bysticking 02 Nos. from PVC sheets of 5mm thickness using PVC solvent cement adhesive. Door edge liping to be painted with PVC ink of matching colour of prelam mouded PVC sheet of door. 20mm thick (5mm x 4Nos) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 Nos stainless steel but hinges of size 100mm x 25mm x 2mm & 50 mm long steel screws drilled suitable to pass through both the walls of the MS tube other hardswares should be fixed with 25mm x 8mm size still screws etc completed all as directed. Make :Rajshri Plastiwood or equivalent as approved by GE from list of approved makes. |
| 14 | Demoliation Cement concrete (unreinforced) Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as directed. |
| 15 | M&L 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in plinth protection laid in alternatebays (not exceeding 2 Sqm each)and finished even and smooth without using extra cement and providing jointsthroughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed. |
| 16 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debries/rubbishfrom the site complete all as specified and directed. |
| 17 | M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and as directed. |
| 18 | M&L Non skid white tiles7 to 8mm thick(square/ rectangular) area of each tiles exc.11 sqm but not exc 0.18 sqm in flooretc set and jointed in neat cement slury over and including cement screed 15 mm thick 1:6 complete all as specified and as directed. |
| 19 | M&L white glazed ceramic tiles 600 x 300 x 9-10mm thick in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing with CM (1:4) complete all as specified and as directed. |
| 20 | S&F framed work such as grills, grating, etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed baluster; walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 including necessary preperation of surfaces and applying one shop coatof red oxide, zinc chrome primer complete all as specified and as directed. |
| 21 | S&F in repair , aluminum anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed |
| 22 | S&F in repairs,15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified and directed |
| 23 | S&F in repairs, 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed |
| 24 | S&F in repairs, 75mm UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/ Ceilings complete all as specified and as directed. |
| 25 | S&F in repairs, 110mm UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/ Ceilings complete all as specified and as directed. |
| 26 | S&F 15mm bore GI pipe medium grade water tube with all fittings laid in floors fixed to walls and ceilings or laid in floors, including necessary taking down of exsisting old pipe complete allas specified and as directed. |
| 27 | S&F 20mm bore GI pipe medium grade water tube with all fittings laid in floors fixed to walls and ceilings or laid in floors, including necessary taking down of exsisting old pipe complete allas specified and as directed. |
| 28 | S&F in repair, single piece-WC with PP soft close seat cover , Hinges, Fixing accessories set and accessories set, Cistern fitting, Size:360x640x685mm,S trap-110mm all as specified and as directed Make-JAQUAR CAT No-SLS-WHT-6851S or equivalent as approved by GE from list of approved makes. |
| 29 | S&F in repair, Sink Mixer with Swinging Spout (Wall Mounted Model) With Connecting Legs & Wall Flanges complete all as specified and as directed Make-JAQUAR CAT No-CON-CHR-309KNMor equivalent as approved by GE from list of approved makes. |
| 30 | S&F in repair, 15mm angular stop cock with wall flange all as specified and as directed make -JAQUAR CAT NO-FON-40053 or equivalent as approved by GE from list of approved makes. |
| 31 | S&F in repair, Table top wall hang basin with fixing accessories,size :425x345x175mm incl waste coupling Make-JAQUAR CAT No-CNS-WHT-903 or equivalent as approved by GE from list of approved makes. |
| 32 | S&F in repair, Bottle trap (with internal partition) 32mm size with 250mm & 190mm low wall connection pipes & wall flange all as specified and as directed Make-JAQUAR CAT No-ALD-769L250x190 or equivalent as approved by GE from list of approved makes. |
| 33 | S&F in repairs 15mm bore, 2 Way bib cockdhrome finishedand fixed complete all as specified and as directed.Make JAQUAR Cat no ORP-CHR-10041PMas approved by GE from list of approved make.all as specified and as directed. |
| 34 | S&F in repair, Hand shower (health faucet)(ABS Body) with 8mm dia, 1.2 meter long flexible tube & wall hook all as specified and as directed Make-JAQUAR CAT No-ALD-CHR-573 or equivalent as approved by GE from list of approved makes. |
| 35 | S&F in repairs Toilet Roll Holder, chrome finishcomplete all as specified . Make JAQUAR Cat no AKP-CHR-35751P as approved by GE from list of approved make.all as specified and as directed. |
| 36 | S&F in repair, Reflection looking mirror of size 600x450mm fixed to wall with chromium plated brass screws and cup washers all asspecified and as sdirected.Make PARRYWARE Cat no C 8611 or equivalent as approved by GE from list of approved makes. |
| 37 | M&L 18-20 mm Granite (of any type) thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 20mm thick screed bed or bedding layer cement mortar (1:6) complete all as specified and directed. |
| 38 | M&L prepration of new plastered surfaces ofwalls and applying white cement based wall care putty (minimum 1.5mm thick) and applying two coats of plastic emulsion paint over a coat of primer complete all as specified and directed |
| 39 | M&L complete removal of existing treatment surfaces of walls, preperation of surfaces, applying white cement based wall care putty (minimum 1.5mm thick) and applying two coats of plastic emulsion paint over a coat of primer complete all as specified and directed |
| 40 | M&L Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 mmean radius built in cement mortar 1:6 complete all as specified and as directed |
| 41 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.and making good disturbed surfaces of walls, floors, etc as per existing specification after providing point wiring under respective items here-in-after complete all as specified and directed. |
| 42 | Taking down unserviceable main switches and DB"s including MCCB/MCB;s of any size and capacity complete all as directed. |
| 43 | M&L for concealed point wiring for light/fan points controlled by one, one way switch with two single core 1.5 Sq.mm size FRLSH multistranded copper conductor PVC insulated cables and one single core 1.5 Sq.mm size green FRLSH colour PVC insulated,multistranded copper conductor PVC cable as earth continuity conductor,1100 volts grade, complete drawn in and including 20mm(minimim) medium grade rigid PVC CONDUIT and conduit accessories i.e. joint boxes, terminal boxes for mounting or housing switches, socket outlets, fan regulators, etc. confirmingto IS specifications, including provision of flush modular mounting boxes, with back plate and cover plate of appropriate size & thickness for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for Modularboxes & making good to walls, floors etc. complete all as specified & as directed |
| 44 | S&FLED lights fitting 1x 20Watt, 220Volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable ofsuitable size from ceiling rose complete all as specified and directed. |
| 45 | S&F Modular switch, single pole, one way, 6 Amp, 1 Module, 230 volt, complete all as specified anddirected. |
| 46 | S&F ceiling rose, PVC/ polycarbonate, isolated body, three terminals, complete all as specified and directed. |
| 47 | S&F stepped type modular electronic fan regulator 120 watt 2 module suitablefor 1200/1400 mm sweep energy saving fans, complete all as specified and directed. |
| 48 | S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), IP-43 protection, doubledoor, Single pole & neutral, complete including blanking plates as required &flush to wall/other surface complete all as specified and directed. |
| 49 | S&F MCB, SPN, C Series 240 Volts, 32 Amps 50 HZ, 10KA complete all as specified and directed. |
| 50 | S&F MCB, SP, C Series 240 Volts, 6-32 Amps 50 HZ, 10KA complete all as specified and directed. |
| 51 | S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m and connecting up complete and provision of cable 3 core of size 0.75 Sqmm from ceiling rose to fan complete all as specified and as directed. |
| 52 | S&F 250mm bore ductile iron pipe with spigot and socket ends class K-9 suitable for and including push on joint(rubber gasket joint) in any length, laid in trenches including taking out old unserviceable pipe of any description complete all as specified and as directed. |
| 53 | S&F CI sluice valve of size 250 mm bore with brass spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flangedcomplete with rubber/fibre board insertion gasket joints, nuts, bolts & washers of required size and numbers complete all as specified and as directed. |
| 54 | M&L Construction Brick Masonry Valve Pit of size 1200x1200x1200 mm (Internal Dimension) one Brick thick Wall in Cement Mortar 1:4 on 100mm thick PCC 1:4:8 (40mm graded aggregate) in Foundation, Rendering 15mm thick internally and externally upto 150mm below GL, providing 3.0mm thick MS Sheet Valve Pit Cover, welded with 40x5mm Flat Iron Frame alround including provision of Hinges, Handle with Locking Arrangement and 40x40 x6mm Angle Iron Frame fixed on top of Valve Pit by means of holdfast 150mm long, embedd -ed in PCC 1:2:4 (20mm graded aggregate) Block of size 230x200x100 mm, applying two coats of Anti-corrosive Paint to all exposed Steel Surfaces over a coat of red oxide zinc chrome Primer after preparation of Surfaces and necessary Earth Work in Soft/ Loose Soil complete all as specified and asdirected. |
| 55 | M&L ductile iron fittings for spigot & socket ductile iron pipes such as bends (any type, radius and angle), taper any type (straight, bend, increasing decreasing or double socket etc) Tee pieces single branch, "Y" junction, double branch, cross (all sockets or socket and spigot), collars, cap and plug suitable for push on joints size up to 250 mm bore, including taking out the old CI fittings complete all as specified and directed. |
| 56 | Labour for making horizontal bore hole under road surfaces,upto 250mm bore bytrenchless techonology using ultra sounding technoque and necessary machines as required suitable for 0.4mpa working pressure at a depth of not less than 1.50 meters below the road surfaces for passing out pipe complete all as specified and as directed. Note: (i) Work shall be carriede out at night hours only and work to be completed on the same day. (ii) Necessary safety precautions/arrangement for road traffic, boards/signs required to be made by the contractor (iii) Liasioning with civil authorites for smooth progress of work/smooth running of traffic to be mainted by the contractor (iv) Work to carreird out in civil area i.e Basistha Charali and Cost of horizontal boring is deemed to be inclusive of all the aspects as mentioned above and nothing shall be admissible at later stage |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
