|
| 1 | SUPPLY OF EQUIPMENTS |
| 2 | Prism holder with screw for Spectrometer (spectrometer and prism table is available in the laboratory – Don’t include in the quotation) (As per NIT) |
| 3 | Hollow prism of angle 60 degree (used to measure the refractive index of the given liquid) (As per NIT) |
| 4 | Measurement of Planck’s constant by LED Method with variable temperature (Complete Kit) (As per NIT) |
| 5 | Measurement of Planck’s constant by photoelectric effect Method (Complete Kit) (As per NIT) |
| 6 | Young’s Modulus – By Uniform bending- Two knife edges- Wooden scale- Wax(Travelling microscope is available in the laboratory – Don’t include in the quotation) (As per NIT) |
| 7 | Young’s Modulus – By Cantilever Bending- Wooden Scale- Telescope- Mirror- Scale fitting Jockey (As per NIT) |
| 8 | Optical fiber characterization – Determination of numerical aperture of an optical fiber – Breadboard based with diode laser and pin hole detector (As per NIT) |
| 9 | Solar Cell Characteristics – Determination of efficiency and Fill factor (Complete Kit)(Image of the Complete Kit need to be enclosed in the technical bid) (As per NIT) |
| 10 | Hall Effect Experiment(Includes Electromagnet, Gauss meter with Hall Probe to measure magnetic field strength and two semiconductor materials based probe for measurement)(Image of the Complete Kit need to be enclosed in the technical bid) (As per NIT) |
| 11 | Logic Gates – Verification and ConstructionAND Gate with 5 V as input – The logic gate must be made in a mica board with resistor and diode not with an IC chip(Image of the Complete circuit need to be enclosed in the technical bid) (As per NIT) |
| 12 | OR Gate with 5 V as input - The logic gate must be made in a mica board with resistor and diode not with an IC chip(Image of the Complete circuit need to be enclosed in the technical bid) (As per NIT) |
| 13 | NOT Gate with 5 V as input - The logic gate must be made in a mica board with resistor and diode not with an IC chip(Image of the Complete circuit need to be enclosed in the technical bid) (As per NIT) |
| 14 | 5 V - IC Regulated power supply for the experiment mentioned in Item No. 10 (As per NIT) |
| 15 | Determination of Hysteresis losses in a Ferromagnetic materialDetermination of retentivity, coercivity andsaturation magnetization of the given ferromagnetic material- Solenoid- Ferromagnetic Speciment Rod- Commutator/Reversing Key- Ammeter- Deflection Magnetomer- Compensating Coil- Battery- Rheostat (As per NIT) |
| 16 | Determination ofmoment of inertia of disc and rigidity modulus of a wire-Torsional pendulum (Complete Setup) (As per NIT) |
| 17 | Handheld Digital Multimeter with Silicone Case- Low voltage symbol display, overload protection.- Digital Multi-meter, With large overview LCD display.Specification:- DC voltage: 200mV--2-20-200-600V ±0.5%- AC voltage: 200V-600V ±1.0%- DC current: 200u-2m-20m-200m-10A ±1.8%- Resistance: 200-2k-20k-200k--2MΠ±1.0%- Input resistance: 1MÎ- LCD Display Size: 45×20mm- Diode detection: Yes- Triode detection: Yes (PNP / NPN triode hFE)- Power: 6F22 type 9V battery (As per NIT) |
| 18 | Stainless Steel (Heavy Duty) Wrench and Spanner Set (As per NIT) |
| 19 | Interchangeble Multipurpose Screwdriver Set Magnetic Slot Wrench Bits (As per NIT) |
| 20 | Ethanol (8 litre) (As per NIT) |
| 21 | Titanium (IV) isopropoxide solutionReagent grade purity – 97%(with CAS number) (500 ml) (As per NIT) |
| 22 | Silver nitrate PowderReagent grade purity – 99%(with CAS number) (25 gram) (As per NIT) |
| 23 | Centrifuge Glass Tube for swing out head rotor with suitable reduction adaptor (for the instrument REMI- R23)Capacity – 200 mlD x H (in mm) – 50 x 110 (As per NIT) |
| 24 | Stainless Steel Teflon lined Hydrothermal Autoclave ReactorCapacity – 200 ml (As per NIT) |
| 25 | Double side transparent/polished Quartz cuvette for UV-Visible spectrometer with dimensions (mm) – 45 x 12.5 x 12.5 (As per NIT) |
| 26 | Four side transparent/polished Quartz cuvette for Photoluminescence spectrometer with dimensions (mm) – 45 x 12.5 x 12.5 (As per NIT) |
| 27 | Tin (II) Chloride PowderReagent Grade Purity – 98%(with CAS number) (100 gram) (As per NIT) |
| 28 | Tetraethyl orthosilicate solutionReagent Grade Purity – 98%(with CAS number) (500 ml) (As per NIT) |
| 29 | Silver Conductive Paste (for electrode making)(25 gram) (As per NIT) |
