Tender For The Purchase Of Furniture For Hod Room In The Department Of English & Foreign Languages In Bharathiar University At Coimbatore -, Coimbatore-Tamil Nadu

Tender For The Purchase Of Furniture For Hod Room In The Department Of English & Foreign Languages In Bharathiar University At Coimbatore -1. Executive table size : W2200 X D800 X H780mm Side Table size : 1010W X 500D X 650HT Main Table details. Made of Pre laminated particle board. Desk top made of 50mm thick Pre laminated particle board and edges covered with 2mm PVC lipping on all exposed edges. Modesty panel provide in front side of table made of 15mm thick pre laminated particle board of 450mm height. The table is fitted with 200mm wide aluminum flip up provision to mount switches and sockets. with telescopic hinge. Table Top Supporting Leg Details: One side of main table supported with fixed drawer(3Drawers). The storage top are made of 15 mm both side pre laminated particle board with 2mm PVC lipping around and bottom, around sides are 15mm both side pre laminated particle board. Three Drawers are fitted with Noiseless telescopic smooth heavy duty drawer rails (load capacity 65 kg.) (ISO certified); drawers with full opening and fitted with proper Branded locking arrangements and Leatherlite handle for opening drawers. Cupboard will have single drawers which are fitted with telescopic smooth runners and with proper locking arrangements. Front opening doors are fitted with telescopic hinge. Side Storage Table Details: The storage top are made of 15 mm both side pre laminated particle board with 2mm PVC lipping around and bottom, around sides are 15mm both side prelaminated particle board. Back panel are 9mm thick pre laminated particle board Side Storage Table Details: Size : 1010W X 500D X 650HT The storage top are made of 15 mm both side pre laminated particle board with 2mm PVC lipping around and bottom, around sides are 15mm both side prelaminated particle board. Back panel are 9mm thick pre laminated particle board. 2. Storage Size : Size: 900L X 450D X 1800mmH. TOP: Made of E-1 Grade (Formaldehyde class) Pre laminated particle board of 25mm thick, Pre laminated particle board edges covered with 2mm PVC lipping on all exposed edges. Back panel: Made of E-1 Grade (Formaldehyde class) Pre laminated particle board. Table top made of 9mm thick Pre laminated particle board. Shutter: Made of E-1 Grade (Formaldehyde class) Pre laminated particle board. made of 18mm thick Pre laminated particle board and edges covered with 2mm PVC lipping on all exposed edges and drawers with full opening and fitted with good quality locking arrangements, cabinet hinges and Groove handle for opening drawers Accessories is all made of Epco brand. 3. Storage Size : Size: 900L X 450D X 750mmH. TOP: Made of E-1 Grade (Formaldehyde class) Pre laminated particle board of 25mm thick, Pre laminated particle board edges covered with 2mm PVC lipping on all exposed edges. Back panel: Made of E-1 Grade (Formaldehyde class) Pre laminated particle board. Table top made of 9mm thick Pre laminated particle board. Shutter: Made of E-1 Grade (Formaldehyde class) Pre laminated particle board. made of 18mm thick Pre laminated particle board and edges covered with 2mm PVC lipping on all exposed edges and drawers with full opening and fitted with good quality locking arrangements, cabinet hinges and Groove handle for opening drawers Accessories is all made of Epco brand. 4. Storage Size : Size: 750L X 450D X 750mmH. TOP: Made of E-1 Grade (Formaldehyde class) Pre laminated particle board of 25mm thick, Pre laminated particle board edges covered with 2mm PVC lipping on all exposed edges. Back panel: Made of E-1 Grade (Formaldehyde class) Pre laminated particle board. Table top made of 9mm thick Pre laminated particle board. Shutter: Made of E-1 Grade (Formaldehyde class) Pre laminated particle board. made of 18mm thick Pre laminated particle board and edges covered with 2mm PVC lipping on all exposed edges and drawers with full opening and fitted with good quality locking arrangements, cabinet hinges and Groove handle for opening drawers Accessories is all made of Epco brand. 5. Executive Revolving High Back Mesh Senior chair with cushion seat and Mesh back with adjustable arm Base : The 640mm dia (26 inches) five pronged base is made out of GF nylon – Reinforced with bottom ribbing for additional buttress and strength. Tested prudently and rigorously as per ANSI/BIFMA X5.1- 2011 General Purpose Office Chair Standards Castors - Castors - Twin Castors 50mm dia castors compling to ANSI / BIFMA X 5.1 – 2002 Gaslift - Gaslift - Class 4 tested -ANSI BIFMA performance standards Seating Structure - Seat and back is made out of 12mm molded hot pressed plywood in ergonomic shape fitted with Imported T-nuts and revited in to the wood. Upholstery : Cushion with pre moulded foam of 50 - 60 density in the shape of plywood. Density -- 52 kg/m3 Hardness -- 12.6kgf at 25% Mechanism - Distinctively and characteristically designed tilt mechanism offering a very smooth and fluidic reclining motion with tension adjust knob and importantly offering seat to back recline ratio of 3:7, optimal for good back support.Multilock mechanism is fabricated from CR Sheets, undergo through CO2 welding process imparting uniform surface finish and tensile strength. The components are processed with high degree of precision and care so as to assemble with other parts in perfect harmony to give smooth and effortless reclining experience. Tension springs are made out Grade II material conforming to Indian Standards. Also provided with release levers for locking mechanism and height adjustment of seat. Mechanism aides to operate the height adjustment, and has been equipped with 4 locking positions, back rest “ Return Prevention” function Headrest - Adjustable Headrest Back - Mesh fabric used for back upholstery With Unique Dynaflex Two Piece Back Construction , Dya Flex provides a comfotable cushioning that stimulates the spine & abdominal muscles to promote a healthy posture & back . Inbuilt body flex lumbar support that synchronises perfectly with your back in all positions of recline. Tension Control : - Tension control is below Seat Armrest - Moulded polyurethane Arms confirming to IS 7078 with steel inserts for long life. One way adjustable - Height Adjustable. Fabric - Seat is duly upholstered with approved fabric. 6. Specifications: Visitor Chair. • Frame :The Frame will be made out of ERW oval tube with 31X16 mm with 1.6 mm thickness pipe conforming to IS – 4923. Frame is welded by Co2 welding process for uniform finish conforming to IS 816. • Surface finish : Frame is powder coated to provide an attractive finish. It will be in black colour. The powder coating pre-treatment is carried out with three in one chemical. After pre-treatment process, the components are powder coated forbetter adhesion of paint. The frames are powder coated with epoxy polyester powder to the thickness of 40-60 microns as per IS 101 and oven baked at 180°. Product undergoes the following testing process for durability and functionality, cross cut test for ensuring adhesion of powder coating as per IS 13871. Powder coated products are durable & reduce the risk of scratches, chipping, abrasions, corrosion, fading and other wear issues. • Leg Bushes : Bushes moulded with PP. • Dimensions: Back width : 475mm , Total height : 1000 to 1100 mm, Back height- 570 mm. Seat width : 505 mm, Seat depth : 465 mm, Seat height : 465 to 565 mm.

INR 300 /-

INR 4000.0 /-

Refer document