}

Tender For E-Tender For Laying Plb Pipe/ Duct Works By Open Trench/ Trenchless Technology/Overhead Etc. By Optical Fibre Cable Pulling/Blowing And Splicing Works Etc., For 4G Saturation Project For Koraput Telecom District. Zone-I, koraput-Odisha

Bharat Sanchar Nigam Limited-BSNL has published Tender For E-Tender For Laying Plb Pipe/ Duct Works By Open Trench/ Trenchless Technology/Overhead Etc. By Optical Fibre Cable Pulling/Blowing And Splicing Works Etc., For 4G Saturation Project For Koraput Telecom District. Zone-I. Submission Date for this Tender is 22-12-2022. Pipe Laying Tenders in koraput Odisha. Bidders can get complete Tender details and download the document.




Tender Notice

35051987
Tender For E-Tender For Laying Plb Pipe/ Duct Works By Open Trench/ Trenchless Technology/Overhead Etc. By Optical Fibre Cable Pulling/Blowing And Splicing Works Etc., For 4G Saturation Project For Koraput Telecom District. Zone-I
Open Tender
Indian
Odisha
koraput
22-12-2022

Tender Details

E-Tender For Laying Plb Pipe / Duct Works By Open Trench / Trenchless Technology / Overhead Etc. By Optical Fibre Cable Pulling / Blowing And Splicing Works Etc., For 4G Saturation Project For Koraput Telecom District. Zone-I

Key Value

Document Fees
INR 2360 /-
EMD
INR 534000.0 /-
Tender Value
INR 2.66 Crore /-

BOQ Items

Name of Work: E-Tender for Laying PLB pipe/ Duct works by Open Trench/ Trenchless Technology/Overhead etc. by Optical Fibre Cable Pulling/Blowing and splicing works etc., for 4G Saturation Project for KORAPUT Telecom District [Zone-I].
Sl. No. Item Description
1UNDERGROUND OFC LAYING
2Excavation of Trenches/HDD
3Excavation trenches up to a depth of 165 meters and back filling the excavated trenches after laying the HDPE pipe (Non Rocky Soil)
4Excavation trenches up to a depth of 165 meters and back filling the excavated trenches after laying the HDPE pipe (Rocky Soil)
5Horizontal Boring (Manual) at a depth of 1.65m for crossing roads/railway track inserting 65/40 mm dia GI pipes and pushing HDPE pipes/PLB pipe inside and drawing PP rope: (Horizontal Boring (HDD) at a depth of 1.65m upto 2 pipes.
6Horizontal Boring (Horizontal Directional Drilling) at a depth of 1.65m for crossing roads/railway track and pulling HDPE pipes/PLB pipe inside and drawing PP rope:
7Horizontal Boring (HDD) at a depth of 1.65m upto 2 pipes.
8Laying of PLB/HDPE Pipe/GI Pipe/RCC Pipe/DWC
9The BSNL will supply PLB/HDPE Pipes/Coil PP
10HDPE/PLB Pipe (40mm) laying coupled with HDBE/PLB Sockets and drawing of PP Nylon rope through it (per Mtr)
11The BSNL will supply PLB/HDPE Pipes/Coil PP
12Laying and Fixing of 65/40 mm GI Pipes/RCC/DWC pipes in trenches with HDPE pipes/PLB Pipe inside and drawing PP nylon Rope
13Laying and fixing of GI/RCC/DWC Pipes on Bridges and Culverts with HDPE pipes/PLB pipe inside and drawing PP Nylon Rope with Iron Clamps
14The BSNL will supply GI pipes/RCC/DWC Coupler
15Providing RCC protection in the ratio of 1:2:4 for encashing PLB/GIDWC pipes in the road, bridges, Road crossings and culverts and for low depth protection or on wheel guard or bridge as specified in the construction practices of OFC construction including material at site.
16Cable Laying
17Opening of manholes, pulling/blowing of OF cable, sealing of HDPE/PLB Pipe in manholes by rubber bushes/couplers and providing HDPE/PLB/RCC Split pipes in manholes and back filling of manholes per meter (Mtr.)
18Splicing Termination of Optical Fibre Cable, Splicing of all fibres of OF cable laid at every joint within specified splicing loss range (<=0.2db) and making termination at the ends. All materials required for splicing and labourers except Joint closures to be supplied by vendor/bidder.
19Splicing/Termination of Optical Fibre Cable per joint (Joint) 24F
2048F
2196F/144/288F (Ribbon)
22Joint Chamber
23Supply and fixing of pre-cast RCC joint with size 1.2M inner dia x 0.8M depth and ring thickness of 40mm made of cement concrete mix of 1:2:4. It should have split RCC cover (with Two Haves) of thickness 40mm made of cement concrete mix of 1:2:4. Base should be circular. Scope includes required excavation, backfilling with clean sand and all above operations including supply of materials.
24Route Indicator
25Digging of Pits 1m towards jungle side on each manholes/joint chamber for transporting & fixing of route/joint indicator, fixing and concreting of routes/joint indicator, painting and sign writing of route/joint indicators (Indicator)
26Route Index Diagram
27Documentation and providing details of Lat-Long of the route/Videography of the route on which cable is laid
28Cost of cutting concrete/Asphalt surface
29OVERHEAD CONSTRUCTION OF AERIAL/ADSS OF CABLE
30Cost of pole fixing as per alignment for 20 Posts/Km including pole/socket assembly (A4BC socket and tube assembly and fixing bracket)
31Cost of Galvanised Tubular Steel Poles of tubular in design and swaged of the length of 7 meters as per IS 271 1 to 3 of 1980 with top cap welded and GI base plate of size 250x250x06mm welded at bottom.
32Cost of Galvanised Tubular Steel Poles of tubular in design and swaged of the length of 8 meters as per IS 271 1 to 3 of 1980 with top cap welded and GI base plate of size 250x250x06mm welded at bottom.
33Erection of 7/8M posts (with necessary fittings) including excavation of pits of size 1x1x1 Meter
34Cost of CC base (1:2:4) for the posts as per the condition of soil and alignment (Size 0.6x0.6x1.2M). All materials are to be supplied by Bidder)
35Pulling of aerial OFC/12F/24F/48F conventional OFC aerially including necessary fittings and jungle cutting (without accessories)
36Pulling of aerial OFC/12F/24F/48F conventional OFC aerially on existing pole (Electric/Telephone) including necessary fittings such as clamp, nut, bolts, binders, D shackel, guide wire etc.
37Cost of binding of Aerial OF cable/conventional OFC aerially.
38Terminating pole Assembly Fittings: - To be used at tension/terminating poles (dead end poles) or poles where splices are located and the poles where the overhead alignment.
39Supply of complete set of Terminating pole assembly fittings that include (i) J-shaped tension hook – 2 nos. (ii) Turn Buckle – 2 nos. (iii) Extension Link – 2 nos. (iv) Clevis Thimble – 2 nos. (v) Protective Helix (T) – 2nos. (vi) Terminating Helix – 2 nos. (vii) Jumper Cable Clamp – 1 no . (viii) Pole Mounted Stay Clamp (Tubular) – 1 no.
40Suspension pole Assembly fittings Type I-For intermediate poles (ADSS/Conventional OFC cable)
41Supply of suspension pole assembly fittings that include (i) Pole mounted Stay Clamp (tubular) -1 no. (ii) Twisted Eye Link – 1 no. (iii) Protective Helix(S) – 1 no. (iv) Armour Grip (AGS) Helix – 1 no. (v) Suspension Clipper with Elastomer Pad – 1 pair (vi) Spiral Vibration Damper (SVD) – 2 nos.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail