|
| 1 | SPIN ON FILTER FOR LUBRICATING OIL |
| 2 | SPINON LUBE OIL FILTER |
| 3 | FUEL FILTER ELEMENT PRE |
| 4 | FUEL FILTER ELEMENT PRIMARY |
| 5 | FUEL FILTER (PAPER) |
| 6 | FUEL FILTER ELEMENT ASSLY |
| 7 | FUEL FILTER ELEMENT SECONDARY |
| 8 | KWF 250.12:LUB OIL (20 LITER) |
| 9 | AIR FILTER (INNER) |
| 10 | ANTI VIBRATION MOUNTS |
| 11 | AIR FILTER (OUTER) |
| 12 | PRIMARY ELEMENT-6H.411.02.0.00 |
| 13 | PRIMARY ELEMENT |
| 14 | 3608:COOLANT ADDITIVE ( 5 LITER) |
| 15 | CHARGING ALTERNATOR 28V 45A |
| 16 | HOSE FOR THERMOSTAT TO WATER TANK |
| 17 | PIPE (THERMOSTAT TO RADIATOR) |
| 18 | HOSE FOR INLET MANIFOLD BEND & CAC OUT |
| 19 | HOSE (FROM RADIATOR TO WATER PUMP) |
| 20 | ENGINE WIRING HARNESS ASSEMBLY |
| 21 | EXPANSION BELLOW: 4\" |
| 22 | STATER RING |
| 23 | FUEL FILTER 1.1 L TWIN BOWL |
| 24 | FUEL LEVEL SENSOR 145MM |
| 25 | WATER SEPARATER |
| 26 | FUEL RETURN PIPE |
| 27 | FUEL PIPE (PRE-FILT TO TANK UNIT ) |
| 28 | H.P.PIPE ASSEMBLY SET |
| 29 | RIGHT HAND HINGE FOR CANOPY |
| 30 | LEFT HAND HINGE FOR CANOPY |
| 31 | LEAK OFF PIPE |
| 32 | FUEL PIPE (PRE FILT TO FEED PUMP) |
| 33 | RELAY BOARD 1.5 CH 70 A CAPA |
| 34 | ON/FF SELECTOR SW.(WITH NO ELEMENT |
| 35 | RELAY 24VDC |
| 36 | POLY V BELT 8PK:1065 |
| 37 | POLY V BELT 4PK: 1515 |
| 38 | SENSOR UNIT: ELEC TEMP GAUGE |
| 39 | MAGNETIC PICK UP 16X1.5 THREAD |
| 40 | LUBE OIL SUPPLY PIPE |
| 41 | SET OF O RINGS: 6SL9088T |
| 42 | SET OF COPPER WASHER |
| 43 | WATER PUMP SUB.ASSEMBLY. |
| 44 | FUEL TANK S/F: 180 HIGH |
| 45 | LUB OIL PRESSURE SENSOR |
| 46 | ACTUATOR WITH REVERSE SPRING |
| 47 | ECU: 4K1080TA-125 KVA |
| 48 | STARTER RING 121 TEETH,3.175 MODULE |
| 49 | WATER PUMP ASSLY WITH DEL VOL 282.5 CRS |
| 50 | CHARGING ALTERNATOR 12V, 35A |
| 51 | AIR CLEANER ASSLY WO ELEMT |
| 52 | HOSE FOR AIR SUCTION PIPE |
| 53 | LEFT HAND LOCK WITH CATCHER |
| 54 | RH LOCK WITH CATCHER 100-600 KVA |
| 55 | HOSE: PIPE TO WATER PUMP 45X45X80L |
| 56 | HOSE: RADIATOR TO WATERPUMP 45X45X130L |
| 57 | OIL SEAL (115X140X12) CR MAKE |
| 58 | GEAR END OIL SEAL (80X105X12) |
| 59 | EXPANSION BELLOW |
| 60 | FUEL FEED PUMP ( F 002 A 50 025 ) |
| 61 | BREATHER HOSE |
| 62 | HOSE STRAIGHT WITH CENTRAL HUMP |
| 63 | 6K1080:POLY V-BELT |
| 64 | 6K1080:POLY -V BELT 7 PK BELT |
| 65 | MUD COLLECTOR-FILTER (9 450 030 205) |
| 66 | FUEL PIPE INLET WATER SEPRATER TO FIP |
| 67 | FUEL RETURN PIPE |
| 68 | FUEL PIPE TANK TO MUD FILTER |
| 69 | BANJO BOLT :M14X1.5 |
| 70 | THERMOSTAT ELEMENT |
| 71 | THERMOSTAT BYPASS HOSE |
| 72 | LEAK OFF PIPE |
| 73 | LEAK OFF PIPE FOR FIP & INJECTOR |
| 74 | LEAK OFF PIPE (FOR FILTER) |
| 75 | HIGH PRESSURE PIPE ASSEMBLY |
| 76 | CENTRIFUGE FILTER |
| 77 | FUEL FILTER BSIII HA494 HA694 |
| 78 | FUEL PIPE FEED PUMP TO FUEL FILTER |
| 79 | HOSE: AIR PIPE -TC TO CAC |
| 80 | ENGINE WIRING HARNESS ASSEMBLY |
| 81 | WATER SEPARATOR |
| 82 | RH LOCK WITH CATCHER TO 82.5 KVA |
| 83 | OIL SEAL |
| 84 | OIL SEAL HOUSING |
| 85 | FUEL PIPE PRE-FILETR TO FEED PUMP |
| 86 | OIL SUPPLY PIPE |
| 87 | FAN |
| 88 | EXPANSION BELLOW: TWO PLY |
| 89 | ENGINE WIRING HARNESS ASSEMBLY |
| 90 | HOSE FOR THERMOSTAT TO RADIATOR INLET |
| 91 | LEAK OFF PIPE ASSLY |
| 92 | HOSE (FOR RADIATOR TO WATER INLET PIPE) |
| 93 | HOSE (RADIATOR TO PUMP INLET PIPE) |
| 94 | EXPANSION BELLOW: EXH M\"FOLD |
| 95 | AIR CLEANER WO SAFTY ELEMT 6M3 |
| 96 | TURBOCHARGER |
| 97 | SET OF COPPER WASHER |
| 98 | HEADER FOR LUBE OIL COOLER & FILTER |
| 99 | ALTERNATOR DIODE BRIDGE RECTIFIER |
| 100 | STARTER 12VDC 2.7KW |
| 101 | KIRLOSKAR GREEN AVR |
| 102 | FUEL PIPE :36.040.01.0.00 |
| 103 | 4R1040:FUEL PIPE(7.5,14X14 B,700 WB) |
| 104 | OIL FILLER CAP |
| 105 | ROTATING RECTIFIER ASSEMBLY |
| 106 | 12V INTERFACE CARD:3H.982.32.0.00 |
| 107 | BATTERY CHARGER 10A 12 VDC:02.872.18.0.0 |
| 108 | SELECTOR SWITCH:4H.865.17.0.00 |
| 109 | AIR CLEANER ASSLY: 4.5M3:3H.415.10.0.00 |
| 110 | PRIMARY AIR CLEANER ELE:04.586.03.0.00 |
| 111 | ANTI VIBRATION MOUNTS:2H.332.01.0.00 |
| 112 | HIGH PRESSURE PIPE ASSY:3H.1009.60.0.00 |
| 113 | FUEL FILTER ELEMENT:03.922.42.0.00 |
| 114 | LEAK OFF PIPE:3H.292.01.0.00 |
| 115 | LUBE OIL PIPE ASSLY:D8.306.10.0.00 |
| 116 | OIL SEAL:19.216.03.0.00 |
| 117 | OIL SEAL:10.030.05.0.00 |
| 118 | FEED PUMP ( MICO NO - 9 440 030 0 |
| 119 | LEAK OFF PIPE ASSLY:D3.326.10.0.00 |
| 120 | LEAK OFF PIPE:D2.338.10.0.00 |
| 121 | FUEL PIPE:D1.326.01.0.00 |
| 122 | FUEL PIPE: D1.326.02.0.00 |
| 123 | FUEL FILTER ELEMENT:34.032.03.0.00 |
| 124 | HOSE: AIR INLET MANIFOLD:D4.171.04.0.00 |
| 125 | HOSE :D3.343.37.0.00 |
| 126 | AIR CLEANER ASSLY: D8.319.10.0.00 |
| 127 | AIR CLEANER ELET:D8.319.03.0.00 |
| 128 | EXPANSION BELLOW: D4.122.02.0.00 |
| 129 | STARTER RING:18.097.05.0.00 |
| 130 | STARTER 12V:D3.176.01.0.00 |
| 131 | STOP SOLENOID ASSLY12V :D5.114.20.0.00 |
| 132 | BLOWER ASSEMBLY:D4.014.10.0.00 |
| 133 | ANTI VIBRATION MOUNTS:D1.314.02.0.00 |
| 134 | DSRL,KG28:D3.247.15.0.ASP |
| 135 | ALTERNATOR: 12V 35A:D2.059.01.0.00 |
| 136 | COGGED \" V \" BELT AX54:12.034.02.0.00 |
| 137 | LUBE OIL PRESS SENDOR :21.279.04.0.00 |
| 138 | ANTI VIBRATION MOUNTS |
| 139 | HOSE FOR BREATHER |
| 140 | BREATHER HOSE |
| 141 | HOSE FOR BREATHER |
| 142 | CAC HOSE (HOT SIDE 4 PLIES) |
| 143 | CAC HOSE COLD SIDE |
| 144 | CAC HOSE |
| 145 | CAC PIPE |
| 146 | CON ROD ASSLY |
| 147 | VALVE GUIDE (SEMI-FINISH) |
| 148 | VALVE SEAT INSERT: INLET |
| 149 | VALVE SEAT INSERT: EXHAUST |
| 150 | VALVE PAIR |
| 151 | CYLINDER LINER ASSLY |
| 152 | DELIVERY TUBE |
| 153 | FULE PIPE RETURN |
| 154 | OIL SEAL (65X85X13) |
| 155 | HIGH PRESSURE PIPE ASSEMBLY |
| 156 | ASSEMBLY OF INTERMEDIATE GEAR |
| 157 | CONVERSION KIT FROM KG 934 TO KG 645 |
| 158 | HOSE (215 ID X 32 OD, 50 LONG) |
| 159 | DRAIN PIPE ASSEMBLY FOR TURBOCHARGER |
| 160 | LUBE OIL PUMP |
| 161 | SET BOLT - M8X1.25X75 - 8.8 |
| 162 | SET BOLT - M8X1.25X65 - 8.8 |
| 163 | PISTON ASSLY 4R810TA CPCB II |
| 164 | PISTON RING SET 4R810TA CPCB II |
| 165 | 4PKEPDM POLY- V BELT |
| 166 | PUSH ROD |
| 167 | HOSE (THERMOSTAT HSG TO WATER PUMP) |
| 168 | ROCKER SHAFT ASSEMBLY WITH SPRING |
| 169 | SET OF JOINTS |
| 170 | SET OF O RINGS |
| 171 | BEARING BUSH S/E: 4R810 STD UB |
| 172 | BEARING BIG END: 4R810 STD |
| 173 | MAIN BEARING: 4R810 STD |
| 174 | RELAY BOARD 2 & 1/2 12V DC |
| 175 | ENGINE WIRING HARNESS |
| 176 | CYLINDER LINER |
| 177 | PISTON ASSEMBLY |
| 178 | CON ROD BEARING HA3940.25 PAIR |
| 179 | PISTON RING SET |
| 180 | BEARING BUSH S/E KIR HA 494 |
| 181 | BEARING T/W KIR HA 394 |
| 182 | SET OF O RINGS: HA294 |
| 183 | SET OF JOINTS |
| 184 | K SEALENT (80 ML) |
| 185 | BELT (AVX 10 1500) |
| 186 | VALVE PAIR INLET & EXHAUST |
| 187 | VALVE SEAT INSERT-INLET |
| 188 | VALVE SEAT INSERT -EXHAUST |
| 189 | VALVE GUIDE |
| 190 | LUBE OIL COOLER- ALUMINIUM |
| 191 | DOUBLE CONE RING |
| 192 | EXH FAN: 450MM WITH CONNECTOR |
| 193 | BEARING V/R |
| 194 | AIR CLEANER ELEMENT |
