Tender For Shifting Work Of Existing 250 100 Kva Dss At Oirani Pond ,Polsara Nac
Tender Value
13.97 Lakhs
Estimated cost
Bid Submission
08 Dec 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
polasara → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Shifting Work Of Existing 250 100 Kva Dss At Oirani Pond ,Polsara Nac
BOQ
| Sl. No. | Item Description |
| 1 | 09 Mtr long 300 Kg PSC Pole |
| 2 | Pressure channel 100X50X6mm, 2.8mtr 2 No with Galvanisation charges |
| 3 | Transformer mounting channel 100X50X6mm, 2.8mtr long 2 Nos.(9.2Kg/Mtr.)with Galvanisation charges |
| 4 | AB Switch & HG fuse mounting channel 75X40X6 mm,2.8mtr.Long 4 Nos.(6.8Kg/mtr) with Galvanisation charges |
| 5 | Cantilever channel for supporting HG fuse 75X40X6mm MS Angle 1 mtr. Long 2 Nos. (6.8Kg/mtr) with Galvanisation charges |
| 6 | Cantilever channel for supporting HG fuse50X50X6mm MS Angle 1 mtr. Long 2 Nos. (4.5Kg/mtr)with Galvanisation charges |
| 7 | Angle for cantilever arrangement for AB switch and HG fuse 50X50X6mm 2mtr long each, 2Nos(4.5Kg/Mtr)with Galvanisation charges |
| 8 | Angle for mounting of LT distribution box 50X50X6mm 3mtr long each, (4.5Kg/Mtr) with Galvanisation charges |
| 9 | 11KV Disc insulator (T& C)Double disc arrangement |
| 10 | 11KV H/W fitting (T & C) type |
| 11 | 11KV AB switch 3 Pole, 400A |
| 12 | 11KV HG fuse 3 Pole, 400A |
| 13 | 11KV Lighting arrestor 9KV,5KA |
| 14 | LT Distribution Box with MCCB, Alluminium busbar of two bay with Kit Kat fusefor 100 Kva S/s |
| 15 | HT Stay Set (Complete) REC Construction standard |
| 16 | HT Stay Insulator Type -C |
| 17 | Satay Clamp(1.9 Kg /pair) |
| 18 | 7/10 G.I . Stay Wire(Grade -2) |
| 19 | G.I Pipe Earthing 40mm Dia medium gauge 3mtr long for Earthing device |
| 20 | Earthingfor Supports(Coil type) |
| 21 | No.6 G.I wire for earthing |
| 22 | GI Flat (25x6mm) for Neutral & body Earting of DTR |
| 23 | GI Bolts, Nuts & washers |
| 24 | 100 KVA ,11/0.4 KVTransformer BIS Energy level -II |
| 25 | LT 3 .5 Core ,185 sqmm PVC cable(unarmoured) |
| 26 | Material for earthing including masonary work for earth pit, salt , charcoal and cement plate cover |
| 27 | GI Base plate (500 X 500 X 10mm) for support20 KG |
| 28 | Sundries (Paint, Danger Board, AI Binding tape & wire insulating tape, anti climbing device , Clamp connector, Jumpering materials , Socket & other accessories etc. |
| 29 | Concreting of support C.C. 1:3:6, using 40mm HBG metal = 0.45Mtr x 0.45Mtr x 1.5Mtr= 0.3037Cum. @4158.84 = 0.3037 x4158.84 =1263.03or 1270.00 (I) |
| 30 | Cement concreting for stay anchor plate with C.C. 1:3:6 by using 4cm size hard granite metal= 0.45Mtr x 0.45Mtr x 1.5Mtr = 0.3037Cum. @ 4158.84 =0.3037 x 4158.84 =1263.03 or 1270.00 (K) |
| 31 | A) Construction of brick bondary wallfencing with sand and metal spreading to the new plinth mounted DSS(Brick boundary wall for fencing of5\" height with 9\" wall for area8ft x 12ft |
| 32 | B)MS Grill gate 1.5mtr (h)x1.5mtr(w), made of 35x35x6mm Angel and 25x6mm flat. (Angel for out side boarder with horizontal & vertical crossing fori) 35x35x6mm MS Angel=1.5mtrx4=6mtr@3Kg/mtr=18Kg @ Rs.93.00/kg=Rs.1674.00(with galvanisation charges)ii) 25x6mm GI flat=1.5mtrx8x2=24mtr @ 1.2Kg/mtr=28.8Kg @ Rs.93.00/Kg =Rs.2678.80iii) Painting of gate with 2 Coat= Rs.200/- (LS) Total= Rs.(1674+2678.80+200)= Rs. 4552.80 |
| 33 | C) Filling Sand @ Rs. 431.60/Cmt for (8ftx12ftx 1/2ft)= 48Cft = 1.359Cmt i.e, 1.359x431.60= Rs.586.54 Or say Rs.587/- |
| 34 | D) 40mm size HBG metal @ Rs.981.36 / Cmt for (8ftx12ftx1/4ft) = 24 Cft = 0.679Cmt i.e, 0.679x981.96= Rs 666.75 Or say Rs.667/- |
| 35 | E) Sundries for danger board, anti climbing device etc |
| 36 | Part -IIEstimate of DP mounted 11/0.4 KV 250 KVA S/Swith 09 mtr long PSC pole(With existing DTR) ( 9 mtr long 300kg PSC pole) |
| 37 | 2) Pressure channel 100X50X6mm, 2.8mtr 2 No with Galvanisation charges |
| 38 | 3) Transformer mounting channel 100X50X6mm, 2.8mtr long 2 Nos.(9.2Kg/Mtr.)with Galvanisation charges |
| 39 | 4) AB Switch & HG fuse mounting channel 75X40X6 mm,2.8mtr.Long 4 Nos.(6.8Kg/mtr) with Galvanisation charges |
| 40 | 5) Cantilever channel for supporting HG fuse 75X40X6mm MS Angle 1 mtr. Long 2 Nos. (6.8Kg/mtr) with Galvanisation charges |
| 41 | Cantilever channel for supporting HG fuse50X50X6mm MS Angle 1 mtr. Long 2 Nos. (4.5Kg/mtr)with Galvanisation charges |
| 42 | Angle for cantilever arrangement for AB switch and HG fuse 50X50X6mm 2mtr long each, 2Nos(4.5Kg/Mtr)with Galvanisation charges |
| 43 | Angle for mounting of LT distribution box 50X50X6mm 3mtr long each, (4.5Kg/Mtr) with Galvanisation charges |
| 44 | 11KV Disc insulator (T& C)Double disc arrangement |
| 45 | 11KV H/W fitting (T & C) type |
| 46 | 11KV AB switch 3 Pole, 400A |
| 47 | 11KV HG fuse 3 Pole, 400A |
| 48 | 11KV Lighting arrestor 9KV,5KA |
| 49 | LT Distribution Box with MCCB, Alluminium busbar of three bay with Kit Kat fusefor 250 Kva S/s |
| 50 | HT Stay Set (Complete) REC Construction standard |
| 51 | HT Stay Insulator Type -C |
| 52 | Satay Clamp(1.9 Kg /pair) |
| 53 | 7/10 G.I . Stay Wire(Grade -2) |
| 54 | G.I Pipe Earthing 40mm Dia medium gauge 3mtr long for Earthing device |
| 55 | Earthingfor Supports(Coil type) |
| 56 | No.6 G.I wire for earthing |
| 57 | GI Flat (25x6mm) for Neutral & body Earthing of DTR |
| 58 | GI Bolts, Nuts & washers |
| 59 | 250 KVA ,11/0.4 KVTransformer with tap Changer BIS Energy level -II(with Existing DTR) |
| 60 | LT 3 .5 Core 300 sqmm PVC cable(unarmoured) |
| 61 | LT 3 .5 Core ,120 sqmm PVC cable(unarmoured)for 03 circuits |
| 62 | Material for earthing including masonary work for earth pit, salt , charcoal and cement plate cover |
| 63 | GI Base plate (500 X 500 X 10mm) for support20 KG |
| 64 | Sundries (Paint, Danger Board, AI Binding tape & wire insulating tape, anti climbing device , Clamp connector, Jumpering materials , Socket & other accessories etc. |
| 65 | Concreting of support C.C. 1:3:6, using 40mm HBG metal = 0.45Mtr x 0.45Mtr x 1.5Mtr= 0.3037Cum. @4158.84 = 0.3037 x4158.84 =1263.03or 1270.00 (I) |
| 66 | Cement concreting for stay anchor plate with C.C. 1:3:6 by using 4cm size hard granite metal= 0.45Mtr x 0.45Mtr x 1.5Mtr = 0.3037Cum. @ 4158.84 =0.3037 x 4158.84 =1263.03 or 1270.00 (K) |
| 67 | Construction of brick bondary wallfencing with sand and metal spreading to the new plinth mounted DSS-- 02 no (Brick boundary wall for fencing of5\" height with 9\" wall for area8ft x 12ft) |
| 68 | MS Grill gate 1.5mtr (h)x1.5mtr(w), made of 35x35x6mm Angel and 25x6mm flat. (Angel for out side boarder with horizontal & vertical crossing for i) 35x35x6mm MS Angel=1.5mtrx4=6mtr@3Kg/mtr=18Kg @ Rs.93.00/kg=Rs.1674.00(with galvanisation charges)ii) 25x6mm GI flat=1.5mtrx8x2=24mtr @ 1.2Kg/mtr=28.8Kg @ Rs.93.00/Kg =Rs.2678.80iii) Painting of gate with 2 Coat= Rs.200/- (LS) Total= Rs.(1674+2678.80+200)= Rs. 4552.80 |
| 69 | Filling Sand @ Rs. 431.60/Cmt for (8ftx12ftx 1/2ft)= 48Cft = 1.359Cmt i.e, 1.359x431.60= Rs.586.54 Or say Rs.587/- |
| 70 | 40mm size HBG metal @ Rs.981.36 / Cmt for (8ftx12ftx1/4ft) = 24Cft= 0.679Cmt i.e, 0.679x981.96= Rs 666.75 Or say Rs.667/- |
| 71 | Sundries for danger board, anti climbing device etc |
| 72 | Part -III Estimate for RCC Plinth for100 KVA DSS (Earth work for digging of foundation plinth = 2Mtr X2 Mtr X0.9 Mtr =3.6 Cum @Rs.99.00/Cum = 3.6 X Rs 99.00) |
| 73 | Filling in foundation and plinth with sand, water and rammed as directed by Engineer In Charge 0.15Mtr X2 Mtr X02 Mtr = 0.6 Cum @Rs.395.68/Cum = 0.6 X Rs.395.68 |
| 74 | Cementing Concreting (1:4:8) with 4 cm size HBG metal 01mtr X2mtrX2mtr =0.4 Cum @ Rs 2891.31/Cum =0.4XRs 2891.31 |
| 75 | RR HG stone masonary in cement mortar (1:6) in foundation plinth per 1Cum1. 0.65mtr X2mtr X2mtr= 2.6 Cum2. 1.4mtr X1.8mtr x1.8mtr =4.54 CumTotal=7.14 Cum @ Rs 2157.74 /Cum = 7.14 XRs 2157.74 |
| 76 | Cementing Concreting (1:2:4) with 12mm size HBG chips 0.1mtr X1.8mtrX1.8mtr =0.32 Cum @ Rs 4173.75+ Rs 79.13X 5 = Rs 4173.75 + Rs 395.65= Rs 4569.40 X 0.32 |
| 77 | 8mm rod = 1.8 mtr X13X2 = 46.8 [email protected] /mtr =46.8X0.39 Kg =18.486 or 18.5 Kg @52.45/ Kg = 18.5X Rs 52.45 |
| 78 | 16mm thick cement plaster (1:6) over brick work & stone work 4X1.8x1.8 +1X1.8x1.8 =12.96 +3.24 =16.2 sqft @ Rs 103.73/sqft =16.2 xRs 103.73 |
| 79 | PART-IVErection of 3F 3W11 KV line with 80 mmsq AAAC Conductor= 0.01Km & 0.01 Km each (forboth DSS) & one interposing polewith 150X150 mm 11 mtr long RS joist pole. 11KV V Cross arm (10.2 Kg each) |
| 80 | GI Back Clamp for \" V\" Cros Arm (0.85 KG each) |
| 81 | Top Bracket (1.3 Kg each) |
| 82 | F Clamp (2.9 Kg each) |
| 83 | 11KV Disc Insulator (T&C ) 45 KN, Porcelin Double disc arrangement |
| 84 | 11KV H/W fitting T&C type |
| 85 | 11KV Pin insulator porcelain |
| 86 | 11KV G.I Pin |
| 87 | Earthingfor Supports(Coil type) |
| 88 | GI Base plate (500 X 500 X 10mm) for support20 KG |
| 89 | GI Nut,Bol & washer |
| 90 | 11 mtr long150X150 mm RS Joist pole(34.6 Kg/mtr)-- 01 no |
| 91 | 80 mmsq AAA Conductor |
| 92 | Sundries (Tree cutting , Paint, Danger Board, AI Binding tape & wire insulating tape, anti climbing device , Clamp connector, Jumpering materials , Socket & other accessories etc. |
| 93 | Galvanisation charges of MS /RS materials |
| 94 | Concreting of support C.C. 1:3:6, using 40mm HBG metal= 0.45Mtr x 0.45Mtr x 1.5Mtr= 0.3037Cum. @4158.84 = 0.3037 x4158.84 =1263.03 or 1270.00 (I) |
| 95 | Couping with C.C. 1:3:6 by using 12mm size hard broken granite chips = 0.3Mtrx0.3Mtrx0.45Mtr =0.0405Cum @ Rs.4754.71/Cum = 0.405xRs.4754.71 = Rs.192.57 or Rs.193.00 (J) |
| 96 | PARTV LTOH 3F 5W linewith 3X95+1X70+1X16 sqmm AB cable= 0.15 Km X 4= 0.6 Km (for four circuit ) & LTOH 3F 5W linewith 3X95+1X70+1X16 sqmm AB cable= 0.3 Km(for single circuit ) over 09 nos of 9 mtr long 300 KgPSC pole support .9Mtr long 300Kg PSC Pole |
| 97 | Lt Stay Set |
| 98 | LT Stay Insulator |
| 99 | LT Stay Clamp (1.4 Kg/pair) |
| 100 | 7/10 SWG Stay Wire Grade-2 |
| 101 | AB CABLE (3X95+1X70+1X16) MMSQ |
| 102 | GI Base plate for support 20Kg |
| 103 | Pole clamp for eye hook for XLPE /AB Cable |
| 104 | Dead end clamp for bare massenger of ABC |
| 105 | Suspension clamp with eyehook for ABC |
| 106 | Insulated Piercing connector Type Amain 16 to 95 sqmmto tap - 16 to 95 sqmm |
| 107 | Neutral connector Type B suitable for main 35-70 sqmm AAAC & TAP -2.5 to 10 sqmm service cable cover by black weatherresistant insulation cover |
| 108 | GI Bolts Nuts and wassers |
| 109 | Earthing Of Support (Coil Type) |
| 110 | Sundries for danger board,anti climbing device etc. |
| 111 | Concreting of support C.C. 1:3:6, using 40mm HBG metal = 0.45Mtr x0.45Mtr x1.5Mtr = 0.3037Cum. @4158.84 = 0.3037x4158.84=1263.03 or 1270.00 (I) |
| 112 | Cement concreting for stay anchor plate with C.C. 1:3:6 by using 4cm size hard granite metal= 0.45Mtrx0.45Mtrx1.5Mtr= 0.3037Cum. @ 4158.84=0.3037x4158.84=1263.03 or 1270.00 (K) |
| 113 | PART- VI(Dismantling Charges for old materials) Dismantling Charges forDP structure |
| 114 | Dismantlingof 63 / 100 KVA,transformers |
| 115 | Dismantlingof 250 KVA,transformers |
AI Tender Summary
Tender Timeline
Nov 29, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedDec 08, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 09, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender