Tender For Piped Water Supply Scheme At- Apati Tal- Khalapur Dist- Raigad (Jal Jeevan Mission) 3Rd Call
Tender Value
1.04 Crore
Estimated cost
Bid Submission
05 Dec 2022
0 days left
EMD
1.04 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
khalapur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Piped Water Supply Scheme At- Apati Tal- Khalapur Dist- Raigad (Jal Jeevan Mission) 3Rd Call
BOQ
| Sl. No. | Item Description |
| 1 | Item No. 1: Excavation for foundation/pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back- filling, etc. complete.Lift 0.00 to 1.5 MBasic Rate Rs192.00Hilly Area(MJP SSR 2021-22 P No 42; I No3) |
| 2 | Item No. 2: Excavation for foundation/ pipe trenches in soft rock and oldcementandlimemasonryfoundationasphaltroad including removing the excavated material upto a distance of50Mbeyond areaandliftsasbelow,stackingas directed by Engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.Soft RockLift 1.50 to 3.00 MBasic Rate Rs572.00Hilly AreaMJP SSR 2021-22 P No 42; I No3 |
| 3 | Item No. 3: Excavationforfoundation/pipetrenchesin hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting includingtrimmingandlevellingthebed, removing the excavated material upto a distanceof50metresbeyondtheareaand lifts as below, stacking as directed by Engineer-in-charge,normaldewatering, excludingbackfilling,etc.completebyall means. (Bd-A-6/259)Hard RockLift 3.0 to 4.50 M |
| 4 | Lift 4.5 to 6.00 M |
| 5 | Item No. 4: Manufacturing, providing and supplying spirally welded /ERW/ SAW / fabricated M. S. pipes (Commercial Quality)including procurements of plates, gas cutting to requiredsize rolling, tack welding assembling in suitable lengths toform pipes, welding on automatic welding machine andforming ‘V’ edge on both ends of pipes including railwayfreight, insurance, unloading from railway wagon, loadinginto truck, transport to stores, unloading, stacking,excluding GST levied by GOI & GOM in all respect etc.complete as per IS - 3589 and IS-5504 as applicable asper specifications (No negative tolerance in thickness ispermissible).ID- 400 MM DIA M.S 10 mm Thick PipeBasic Rate Rs10406.00MJP Corrigendum No. 7 , PN 9 |
| 6 | Item No. 5: Providing and applying pipe coating of fibres, coal tar andsolvent based rubber modified bituminous primer ofdensity 0.92 gms/cu cm and viscosity of 1000-2000 cps @150 gms/sqm followed by seven layers(4mm thick) ofpolythene polymerised bitumen and polyester of local 7layers) pipe coat 4 mm should conform to requirement ofIS- 10221 and AWWA C-203 for prefabricated tapesincluding covering cost on pipe coating. Rates shallinclude cost of material coating and wrapping over thepipes, handling charges, preparation of pipe surface, alllabour, material, etc. complete.ID- 400 MM DIA M.S 10 mm Thick PipeBasic Rate Rs722.00Hilly AreaMJP/SSR/2021-22/P.172/I.19 |
| 7 | Item No. 6: Lowering, laying in position to correct line and level including M. S. pipes with / without any outcoating on pedestals or chairs upon prepared formation. The rate to include loading, unloading, hoisting, marginal cutting wherever required, assembling and tack welding, and transportation upto 500 M. etc. completed as specified.Fixing in position MS Specials etc. complete as specified.ID- 400 MM DIA M.S 10 mm Thick PipeBasic Rate Rs454.00Hilly AreaMJP/SSR/2021-22/P.165/I.1.a.i |
| 8 | Item No. 7: Hydraulic testing of M.S. pipeline to specified pressure including cost of all materials and labour and water for testing for the length upto 1km., using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary.ID- 400 MM DIA M.S 10 mm Thick PipeBasic Rate Rs62951.7.00Hilly AreaMJP/SSR/2021-22/P.171/I.17.a.i |
| 9 | Item No. 8: Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete.Double flanged specials of all diameters10 % of Supply Rate |
| 10 | Item No. 9: Providing and supplying in standard lengths PolyethelenePipes, confirming to IS 4984 / 14151 / 12786 / 13488 withnesessary jointing material like mechanical connector i. e.thread / insert joint / quick release coupler joint /compression fitting joint or flanged joint excludingcoupler/specials, including transportation and freightcharges, inspection charges, loading / unloading charges,conveyance to the departmental stores & stacking thesame in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respectetc. complete.HDPE PE-10075 mm dia. 8 Kg/sq/cmBasic Rate Rs208.00Corrigendum no. 7, PN 6, IN b ii |
| 11 | Item No. 10: Providing and supplying in standard lengths ISI mark rigid unplasticised HDPE pipes Special-10% of cost of pipes shall be considered for cost of PVC specials for estimate purpose only. |
| 12 | Item No. 11: Lowering, Laying and Jointing H. D. P. E./M. D. P. E.pipes in proper position including all specials bycompression fitting/electrofusion and butt fusion jointingprocedure as per relevent IS Code complete with allmaterials for jointing procedure like Electrofusion machine,Electric heater/butt fusion welding machine with hydraulicjack, top loading clamp etc. and all labours as directed byengineer in charge as per IS-7634 Part IIHDPE PE-10075 mm dia. 8 Kg/sq/cmBasic Rate Rs52.8.00Hilly AreaMJP SSR2021-22 P No 115 ; I No 2 |
| 13 | Item No. 12: Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line tospecified pressure including cost of all materials andlabour and water for testing for specified length includingcutting, placing end cap making arrangement for fillingsafe water using reciprocating type pumps which shouldbe able to provide specified test pressure gauges andother necessary equipments, labour, operation charges,etc. required for testing. The rate under this item shall alsoinclude cost of retesting, if necessary and reinstating tooriginal position..HDPE PE-10075 mm dia. 8 Kg/sq/cmBasic Rate Rs4961.00Hilly Area(MJP SSR2021-22 P No 115) |
| 14 | Item No. 13: Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. completeSluice valves 80 mm Dia. PN 1Basic Rate Rs5132.00(MJP SSR2021-22 P No 132 ; It No 2) |
| 15 | Item No. 14: Lowering laying and jointing inposition following C.I.D/F Reflux valves Butterfly valves and sluice valves including cost of all labour joining material, including not bolts and givingsatisfactoryhydraulictestingetc.complete.(Rate for all class of sluice valves)Sluice valves 80 mm Dia. PN 1Basic Rate Rs1738.00Hilly Area(MJP SSR2021-22 P No 135 ; INo 4 ) |
| 16 | Item No. 15: Providingandlayinginsitu cement M15 grades of trap/granite/quartzite/gneiss metal for foundation and bedding including dewatering, form work, compacting and curing, finishing etc. complete.a) 1:2:4 (M-150) grade for Thrust BlocksBasic Rate Rs6204.00Hilly AreaMJP SSR 2021-22, Corrigendum No 9, Date 6-5-22 Pg No 4, It no 1 b |
| 17 | Item No. 16: Providing and fixing in position steel bar reinforcement ofvarious diameters for RCC piles, caps, footings,foundations, slabs, beams, columns, canopies, staircases,newels, chajjas, lintels, pardies, copings, fins, arches, etc.as per detailed designs, drawings and schedules;including cutting, bending, hooking the bars, binding with wires or tack welding and supporting asrequired, etc. complete (including cost of binding wire). (Bd-F- 17/306) Tor SteelBasic Rate Rs84527.00Hilly AreaCorrigendum no. 7, PN 22, IN 1 b |
| 18 | Item No. 17: Refillingthetrencheswithavailableexcavatedstuffwith soft materialfirst over pipeline andthen hardmaterial in 15cmlayerswithallleadsandliftsincluding consolidation, surcharging, etc. completeBasic Rate Rs84.00Hilly AreaMJP SSR 2021-22, P. No. 45, I. No. 15 |
| 19 | Item No. 18: Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. (Bd-A- 9/261)Basic Rate Rs77.00MJP/SSR/2021-22/P.45/I.14 |
| 20 | Item No. 1: Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A- 1/259)Basic Rate Rs150.00ADD 10.00% For Hilly AreasMJP DSR 2021-22 P No 42; I No1 |
| 21 | Item No. 2: Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-2/259)Basic Rate Rs170.00ADD 10.00% For Hilly AreasMJP DSR 2021-22 P No 42; I No1 |
| 22 | Item No. 3: Providing and laying in situ cement concrete in M – 15 (1:2:4) grade of trap /granite/quartzite/gneiss metal for foundation & bedding including bailing out water manually, form work compaction & curing, etc complete. Basic Rate Rs6204.00ADD 10.00% For Hilly Areas(MJP DSR 21- 22, Corrigendum No 9, Date 6-5-22 Pg No 4, It No 1 b) |
| 23 | Item No. 4: Providing second class Burnt Brick masonry wi th convent ional/ I.S.type br icks in cement mor tar 1:6 in superst ructure including striking joints, raking out joints, water ing and scaffolding etc. CompleteBasic Rate Rs7570.00ADD 10.00% For Hilly Areas( PWD DSR 2020-21, P.N. 242, I.N.27.05) |
| 24 | Item No. 5 Providing and casiting in situ CC of trap /granite/quartzite/gneiss metal ofapprovedquality for R CCwork asper detailed drawing anddesigns or as diredcted by Engineer – in- charge including normal dewatering, centering, fromwork,compaction, finishing the formed surface withCM 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish to be provided and curing, etc complete.Foundation b) In RCC M-250Basic Rate Rs7927.00ADD 10.00% For Hilly Areas(MJP DSR 21- 22, Corrigendum No 9, Date 6-5-22 Pg No 4, It No 2 c) |
| 25 | Column b) In RCC M-250Basic Rate Rs9404.00ADD 10.00% For Hilly Areas(MJP DSR 21- 22, Corrigendum No 9, Date 6-5-22 Pg No 5, It No 3 c) |
| 26 | Beam c) In RCC M-250Basic Rate Rs9240.00ADD 10.00% For Hilly Areas(MJP DSR 21- 22, Corrigendum No 9, Date 6-5-22 Pg No 5, It No 4 c) |
| 27 | Slabs d) In RCC M-250Basic Rate Rs9910.00ADD 10.00% For Hilly Areas(MJP DSR 21- 22, Corrigendum No 9, Date 6-5-22 Pg No 5, It No 5 c) |
| 28 | Item No. 6: Providing internal cement plaster 20mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and cur ing etc. complete.Basic Rate Rs393.00ADD 10.00% For Hilly Areas(PWD DSR 2022-23 Page No.256 It.No 32.08) |
| 29 | Item No. 7: Filling the plinth & floors Murum bedding in trenches with approved murum from excavatyed materials form foundation15 cm. to 20 cm. layers including watering and compaction complete.Basic Rate Rs84.00ADD 10.00% For Hilly Areas(MJP DSR 21-22 Page No.453, It No.16) |
| 30 | Item No. 8: Providing and laying cement concrete flooring 40 mm thick wi th M15 cement concrete laid to proper level and slope in alternate bays including compact ion, fi lling joints, marking lines to give the appearance of t i les of 30 cm x 30 cm or other size laid diagonally / square etc finishing smooth (wi th ext ra cement ) in any colour as directed and cur ing etc. complete. With Natural SandBasic Rate Rs536.00ADD 10.00% For Hilly Areas(PWD DSR 2020-21 Page No.262 It.No 33.09) |
| 31 | Item No. 9: Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/Running metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/Running metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating with boxBasic Rate Rs5284.00ADD 10.00% For Hilly Areas(PWD DSR 2022-23 Page No.312 It.No 39.39) |
| 32 | Item No. 10: Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC \"C\" channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 Kilogram/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and 5 mm thick ,95 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the \" c \" channel prelaminated paneling of 5 mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 mm (+/0.25) x 30 mm PVC sheet beading on either side and joined together with solvent cement adhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 nos ) 20 mm wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3 nos M.S.powder coated but hinges of size 100 mm x 25MM x 2mm using 32 mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwaresBasic Rate Rs6548.00ADD 10.00% For Hilly Areas(PWD DSR 2022-23 Page No.318 It.No 39.47) |
| 33 | Item No. 11: Providing flush grooved pointing with cement mor tar 1:3 for stone masonry work including scaffolding and curing etc. complete.Basic Rate Rs182.00ADD 10.00% For Hilly Areas(PWD DSR 2022-23 Page No.257 It.No 32.17) |
| 34 | Item No. 12: Providing and applying washable oil bound distemper of approved colour and shade to old/ new surfaces, in three coats including scaffolding, preparing the surface to receive the priming coat and finishing coat etc. complete. Basic Rate Rs48.00ADD 10.00% For Hilly AreasPWD DSR 2022-23, P. No. 280 It.No.36.11) |
| 35 | Item No. 13: Providing and fixing locking arrangement the standered qualityof lock for pump house, etc completeMarket rateBasic Rate Rs1000.00 |
| 36 | Item No. 14: Providing and fixing in position steel bar reinforcement of various diamenters for RCC piles, caps, footing, foundation, slabs, beams, columns, canopies, staircases, newels,chjjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking he bars, binding with wires or tack welding and supporting as required, etc. complete.(including cost of binding wire)Basic Rate Rs97206.00ADD 10.00% For Hilly Areas( MJP DSR 21-22, Corrigendum No 9, Date 6-5-22 Pg No 7, It No 8 b ) |
| 37 | Item No. 15: Providing and fixing G.I. pipe railing having 1.0 M height consisting 50 x 50 x 6 mm thick M.S. angles as verticals at 1.5 M c/c and additional posts at every corner with 3 rowof 25 mm dia G.I. pipes of medium class variety as horizontal and painting 3 coats of oil paint over 1 coat of anticorrosive paint of approved colour and shade including cosof all labour, transporting bends to curved shape, etc. complete.Basic Rate Rs916.00ADD 10.00% For Hilly Areas( MJP DSR 21-22, P.No.58,It.No.1 ) |
| 38 | Item No. 16: Providing and fixing in position M.S.ladder 0.50 M wide consisting of 75 x10 mm M.S. flats as stringers and 16mm dia M.S. bars in double rows assteps placed at 25 cm c/c including costof material and labour involved, welding,anchoring and applying 3 coats of anticorrosive paint, etc. complete as directed by Engineer-in-charge.(MJP SSR 21-22, Pg No. 217, It.No.5)Basic Rate Rs1493.00ADD 10.00% For Hilly Areas |
| 39 | Item No. 17: Dismantaling of Existing Switch House (2.5x2.5x2.5)MA) Brick Massonary L/WB) Brick Massonary S/WBasic Rate Rs335.00ADD 10.00% For Hilly AreasTotal Rate (PWD DSR 22-23,PN-369, It.N.-46.09) |
| 40 | C) RCC SlabBasic Rate Rs1451.00ADD 10.00% For Hilly AreasTotal Rate (PWD DSR 22-23,PN-370, It.N.-46.29) |
| 41 | Item No. 1: Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon / fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer\"s design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump.Submersible Pump 250 mm dia (with Bronze / Stainless steel (CF8M) Impeller) up to 8 stages3.00 BHP PUMPSETSubmersible Pump 40 HP Sutaible for Total Head of 45 M, and Discharge of 1,45,833 LPMBasic supply Rate for pump2 % for Hilly AreaErrection RateADD 20% for Hilly AreaTotal Rate Rs. = |
| 42 | Item No. 2: Supplying and erecting, Flat flexible submersible cable with, Copper Conductor, PVC insulated, and PVC sheathed.3 core 16 sqmmMJP Mech DSR 2022-23, P. No. 22 I. No. CB-1-6Supply rate Rs.593.0/-lowering rate Rs. 30.0/- |
| 43 | Item No. 3: Supplying and erecting Fully Automatic Star Deltastarter to operate squirrel cage induction motorworking on 380- 440 Volt, 3 phase, 50 Hz with novolt coil, over load element, and ON - OFF pushbuttons, with necessary material and connected tosupply, etc complete. Starter with original sheet steelencloser.< 7.5 HP(MJP /DSR (Mech,)2022-23 I.No.1 P.No.18 LG 4-4)Basic Rate Rs1858 |
| 44 | Item No.4: Providing , installing & commissioning main control pannel boardincluding V.meter & A. meter of suitable range single phase prevention 8 Nos. of phase indicater lamps with colour glass of 230 V rotary switch over load capacitor suitable for < 7.5 HP pump etc.complete. (Market rate) as RA Attached |
| 45 | Item No.5: Ghyscerine filled Pressure gauge Bourdon’s type Each 0 to 20 kg/cm2 with syphone tube, cock etc. as IS 3624:1987 (Mech. CSR 22-23 Pg. no - 5/ PM 11-4)Pressure gauge (150 mm dia)(MJP /DSR(Mech.)2022-23Pg no 5,PM 11-4) |
| 46 | Item No. 6: Providing tools for pumping.As per Rate Analysis |
| 47 | Item No. 7: Main wiring work from M. S. E. B. cut out to the panel board 4 core x 459 mm 1100 grade with I. S. I. Mark standard / Aluminum armored cable (94.1 p.36)Supplying and erecting, XLPE / PVC insulated,armoured cable 1100 V grade with ISI mark Fourcore, solid / stranded aluminium conductor with 6mm thick 25 mm width M.S. spacer with G.I. Earthwire 6 sq mm, complete erected on wall / on polewith 25 X 3 mm M.S. clamps or in provided trench inan approved manner.4 Core 16 sq mm(MJP Mech DSR 2022-23Code No. CB6-4,P. No. 23 )Basic Rate Rs212.00 |
| 48 | Item No. 8: Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP(PWD DSR 2021-22 It No. 9-1-4 )Basic Rate Rs1355.00 |
| 49 | Item No.9: Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004. Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below.100 mm. ( 14.70 kg./m )Basic Rate (MJP SSR PN-82,IN-1(c)(ix)) |
| 50 | Item No.10: Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, etc. complete either underground or in vertical position, as directed by Engineer-in-charge.100 mm. ( 14.70 kg./m )(MJP SSR PN-84,IN-2(c)(ix))+10% For Hilly Area |
| 51 | Item No.11: Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. completeSluice valves 100 mm Dia. PN 1Basic Rate Rs6835.00(MJP SSR2021-22 P No 132 ; INo 2 c ) |
| 52 | Item No.12: Providing & supplying ISI mark CI D/F reflux valve (Non- returnvalve)offollowingdiaincludingalltaxes(central andlocal), railwayfreight, inspectionchargesunloading from railway wagon, loading into truck, transportation upto department stores/site, unloading, stacking etc. complete. reflux valves as per I.S.5312 part I (1984)Reflux valves 100 mm Dia PN 1Basic Rate Rs5713.00(MJP SSR2021-22 P No 131 ; INo 1 b 1 c) |
| 53 | Item No.13: Lowering laying and jointing inposition following C.I.D/F Reflux valves Butterfly valves and sluice valves including cost of all labour joining material, including not bolts and givingsatisfactoryhydraulictestingetc.complete.(Rate for all class of sluice valves)Sluice valves 100 mm Dia. PN 1Basic Rate Rs2272.00Hilly Area(MJP SSR2021-22 P No 135 ; INo 4 ) |
| 54 | Item No.14: Lowering laying and jointing inposition following C.I.D/F Reflux valves Butterfly valves and sluice valves including cost of all labour joining material, including not bolts and givingsatisfactoryhydraulictestingetc.complete.(Rate for all class of sluice valves)Reflux valves 100 mm Dia PN 1Basic Rate Rs2272.00Hilly Area(MJP SSR2021-22 P No 135 ; INo 4 ) |
| 55 | Item No. 1: Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.Note:- H.D.P.E. Pipes shall be as per latest IS Specifications Also HDPE pipes upto 110 mm Dia shall be in coil form90 mm Dia HDPE Pipe 8 Kg/sqcmBasic Rate Rs296.00MJP SSR2021-22 P No 76 ; I No 1 |
| 56 | Item No. 2: ProvidingHDPESpecialsasperstandard specifications&directionofinchargeEngineer.(5 %of Item No.1) |
| 57 | Item No. 3: Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. completeSluice valves 100 mm Dia. PN 1Basic Rate Rs6835.00(MJP SSR2021-22 P No 132 ; It No 2) |
| 58 | Item No. 4: Providing & supplying ISI mark CI D/F reflux valve (Non- returnvalve)offollowingdiaincludingalltaxes(central andlocal), railwayfreight, inspectionchargesunloading from railway wagon, loading into truck, transportation upto department stores/site, unloading, stacking etc. complete. reflux valves as per I.S.5312 part I (1984)Reflux valves 100 mm Dia PN 1.Basic Rate Rs5713.00(MJP SSR2021-22 P No 131 ; It No 1 b 1) |
| 59 | Item No. 5: Providing, erecting, connecting double flanged short body pattern tye manually operated Butterfly Valve having body, disc and end cover in graded cast iron to IS 210 Gr. CF 200generallyconforminginBS5155,Syntheticrubber faced ring secured on disc by retaining ring with stainless steelscrewstubshaftofstainlesssteelridinginTeflon bearings excluding C.C. foundation/ structural steel support confirming to IS 3095-1991.Sluice valves 100 mm Dia. PN 1 for WashoutBasic Rate Rs6835.00(MJP SSR2021-22 P No 132; INo 2c 3) |
| 60 | Item No. 6: ProvidingandsupplyingAirvalvesasperIS-10845and MJP’s standard specifications of approved mark and quality offollowingdiametersincludingalltaxes (Central andlocal),railwayfright,inspectionchargesunloading fromrailwaywagons,loadingintotruck,transportation upto departmental stores/ site, unloading and stacking etc. complete.Air valves 25 mm DiaBasic Rate Rs1054.00(MJP SSR2021-22 P No 136 ; INo 5 A (iii) ) |
| 61 | Item No. 7: Excavation for foundation/ pipe trenches in earth, soils of all types, sand gravel and soft murum, including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.(EARTH SOIL)Basic Rate Rs150.00Hilly Area(MJP SSR 2021-22 P No 42; I No1) |
| 62 | Item No. 8: Excavation for foundation/pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back- filling, etc. complete.(HARD MURRUM)Basic Rate Rs192.00Hilly Area(MJP SSR 2021-22 P No 42; I No3) |
| 63 | Item No. 9: Excavation for foundation/ pipe trenches in soft rock and oldcementandlimemasonryfoundationasphaltroad including removing the excavated material upto a distance of50Mbeyond areaandliftsasbelow,stackingas directed by Engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.Soft RockBasic Rate Rs572.00Hilly AreaMJP SSR 2021-22 P No 42; I No3 |
| 64 | Item No. 10: Excavationforfoundation/pipetrenchesin hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting includingtrimmingandlevellingthebed, removing the excavated material upto a distanceof50metresbeyondtheareaand lifts as below, stacking as directed by Engineer-in-charge,normaldewatering, excludingbackfilling,etc.completebyall means. (Bd-A-6/259)Hard RockBasic Rate Rs1017.00Hilly AreaMJP SSR 2021-22 P No 43; I No7 |
| 65 | Item No. 11: Filling in plinth and floors murum bedding in trenches with approved murum from foundation 15 cm to 20 cm layers including watering and compaction complete.Basic Rate Rs84.00Hilly Area(MJP SSR 2021-22, P. No. 45, I. No. 16) |
| 66 | Item No. 12: Lowering, Laying and Jointing H. D. P. E./ M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II90 mm Dia HDPE Pipe 8 Kg/sqcmBasic Rate Rs67.00Hilly AreaMJP SSR2021-22 P No 115 ; I No 2 |
| 67 | Item No. 13: Lowering laying and jointing inposition following C.I.D/F Reflux valves Butterfly valves and sluice valves including cost of all labour joining material, including nut bolts and givingsatisfactoryhydraulictestingetc.complete.(Rate for all class of sluice valves)Sluice valves 100 mm Dia. PN 1Basic Rate Rs2272.00Hilly Area(MJP SSR2021-22 P No 135 ; INo 4 ) |
| 68 | Item No. 14: Lowering laying and jointing inposition following C.I.D/F Reflux valves Butterfly valves and sluice valves including cost of all labour joining material, including not bolts and givingsatisfactoryhydraulictestingetc.complete.(Rate for all class of sluice valves)Reflux valves 100 mm Dia PN 1.Basic Rate Rs2272.00Hilly AreaMJP SSR2021-22 P No 135 ; INo 4 ) |
| 69 | Item No. 15: Lowering laying and jointing inposition following C.I.D/F Reflux valves Butterfly valves and sluice valves including cost of all labour joining material, including not bolts and givingsatisfactoryhydraulictestingetc.complete.(Rate for all class of sluice valves)Sluice valves 100 mm Dia. PN 1 for WashoutBasic Rate Rs2272.00Hilly AreaMJP SSR2021-22 P No 135 ; INo 4 ) |
| 70 | Item No. 16: Lowering, Layingand fixing in proper alignment and position all types of C.I. Air valves as directed by Engineer in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc complete.Air valves 25 mm Dia- Single BashBasic Rate Rs218.00Hilly AreaMJP SSR2021-22 P No 137 ; INo 10 a |
| 71 | Item No. 17: Providingandfixinginpositionairvalveshaftincluding providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providingPCCblockofM-150concrete150mmthick aroundtheairvalveteeincludingencasingofvertical shaft in PCC M-150 as shown in type design together with providingandmakingflangedjointswhereverrequired and fixing of air valve over the shaft excluding cost of air valve and branch flanged air valve tee. etc. complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines (type design attached.)upto 150 mm on Murum & harder strataBasic Rate Rs5578.00Hilly AreaMJP SSR2021-22 P No 140 ; INo 17 a 1 |
| 72 | Item No. 18: Providingandlayinginsitu cement M15 grades of trap/granite/quartzite/gneiss metal for foundation and bedding including dewatering, form work, compacting and curing, finishing etc. complete.Space No Bd E/1 Pg No 287 and B-7 Pg no 38b) In PCC (M-150)Basic Rate Rs6204.00Hilly AreaMJP SSR 2021-22, Corrigendum No 9, Date 6-5-22 Pg No 4, It no 1 b |
| 73 | Item No. 19: ProvidingandconstructingB.B.masonryvalvechamber with 15 cm thick 1:3:6 proportion PCC bedding, including excavation, B.B. masonry in C.M. 1:5proportion 12 mm thickcementplasterincm1:4proportiononbothsides with providing and fixing C.I. manhole frame and cover in RCC1:2:4copingorcmthickslabetc.completeas directed by Engineer-in-charge.Size 0.90 x 0.60 x 1.20Basic Rate Rs10624.00Hilly AreaMJP SSR 2021-22, P. No. 220, I. No. 1c |
| 74 | Item No. 20: Refillingthetrencheswithavailableexcavatedstuffwith soft materialfirst over pipeline andthen hardmaterial in 15 cm layers with all leadsand lifts including consolidation, surcharging, etc. completeBasic Rate Rs84.00Hilly AreaMJP SSR 2021-22, P. No. 45, I. No. 15 |
| 75 | Item No. 21: Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.90 mm Dia HDPE Pipe 8 Kg/sqcmBasic Rate Rs7442.00Hilly Area(MJP SSR2021-22 P No 115) |
| 76 | Item No. 1: Providing of aquasoft pressure filter systems automatic online hydraulically operated cell cleaning filter with required accessories etc. Complete for connecting to rising main with maximum or minimum operating pressure of 3.5BAR and 2BAR resp. And including the cost of filter inlet valve, outlet valv, bypass valve and non return valve, MS stand for support and confirming to the following specifications.a) The filter equioment is made up of epoxy or polyster carbon steel 37-2 with 1 inlet, 1 outlet and drain and the system consists of coarse screen andfine screen.b)The following accessories should be provided with the hydraulically operated self cleaning filter1) One suitable set of inlet,outlet,bypass2) One suitable pressure gauges to monitor the pressure loss across the filter.3)Suitable stand made of MS frame work, so that the rising main is protected from the weight of the filterc) The manual online hydraulicaaly self cleanig filter unit is designed for the following specifications.NOTE: RATE INCLUDES:1) INSTALLATION, ERECTION AND COMMISSIONING CHARGES.2) INCLUSIVE OF TRANSPORT3) 5 YEARS PERFORMANCE WARRANTYPressure Filter with details attached here with capacity 10 Cum/hr.Note: Required capacity is 10 Cum/hr but commercially this exact capacity pressure filter is not available so adopt the next capacity i.e. 10 Cum/hr.As per quotation received from Aquasoft Kolhapur |
| 77 | Item No. 2:Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum)a) In PCC M-100Basic Rate Add 10% For Hilly Area |
| 78 | Item No. 3: Providing and fixing 6 mm thick ISI mark Asbestos Cement ridge capping for roofing including galvanised iron hooks, bolts, galvanised iron and bituminous washers, galvanised iron clamps, bolts, nuts including scaffolding etc. completeBasic Rate Add 10% For Hilly Area |
| 79 | Item No. 4: Providing IInd class Burnt B.B. masonary conventional brick in CM 1.6 m superstructuresetc complete. Basic Rate Add 10% For Hilly AreaPWD SSR 22-23,PN 242,IN 27.05 |
| 80 | Item No. 5: ProvidingISImarkG.I.Pipeoffollowingclassanddia. Includingalllocalandcentraltaxes,octroi,inspection charges, transportation to stores. etc. complete.GI Pipe 50 mm Dia m Class 5.16 kg/mCorrigendum no.11,PN 2,IN 3 |
| 81 | Itme No 1:- Designing (aesthetically), and constructingRCCelevatedservice reservoirsoffollowingcapacitywith RCCstagingconsistingofcolumns, internalandexternalbracingsspaced verticallynotmore than4.5 metres centre to centre for ESR having capacityupto500cumandnotmore than 6 m c/c for ESRs having capacity above 500 Cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compoundtotheinsidefaceofthe containerincludingrefillingdisposing off the surplus stuff within a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypassarrangements asper departmental design, providing andfixingaccessoriessuchasM.S. ladder, C.I. manhole frame and covers, waterlevelindicators,lightening conductor, G.I. pipe railing around walk way and top slab, providing spiral stair casefromgroundleveltorooflevel, M.S. grill gate of 2 M height with locking arrangementofapproveddesign,B.B. masonry chambers for all valves, ventilatingshafts,providingand applying three coats of cement paint to the structure including roof slab, epoxy painting to internal surface and anti- termite treatment for underground parts ofthestructureandgivingsatisfactory watertightnesstestasperI.S.code. The job to include painting the name of theschemeandotherdetailsonthe reservoir as per the directions of Engineer-in-Charge. The design of the structure be in accordancewithrelevantI.S. specification (I.S. 3370 - 1965 orrevised.)The design shall satisfy the stipulations as per I.S. 1893 - 1984 and I.S. 13920 / 1993 for seismic force and I.S. - 11682 /1985forR.C.C.stagingofoverhead tanks.Fordesignhavingmorethan6 columns, provision of internal bracing is obligatory.External bracings is also obligatory.TheentirestructureshallbeinM-300 mix only.Plain round mild steel bars grade-I conformingtoI.S.432part-Iorhigh yieldstrengthdeformedbars conformingtoI.S.1786orI.S.1139 shallbeused,grade-IImildsteelbars will not be allowed.Irrespectiveofthetypeoffoundation proposedinthedesign,onesetof bracing be provided at the ground level.These rates include providing M.S. ladderforE.S.R.supto2lakhlitres capacityandprovidingspiralstaircase for E.S.R. above 2 lakh litres capacity.Staging shall have to be designed with stressesofM-200concreteforESR. HoweverallRCCconstructionshould be done in M-300.Theseratesareincludingthecostof uplift pressureifany andentire dewatering during execution. In case of water logging area where water is stretch at shallow depth, extra provision of dewatering shall be made as per site condition.All conditions given in the Member Secretary\"sCircularNo.MJP/TS-I/ 350/1668dt.2-8-97andMJP/S-I/ 350/ 2127dt. 13-7-99shall bestrictly followed and additional cost, if any, due totheseconditionsisincludedinthe rates mentioned below.1000010000 lts= 39.02*10000Staging Ht = 8 M8 % Reduction for less Staging Ht. |
| 82 | Item No 2:- Providing and supplying isl standard welded Ddoubie flanged oboe exduding GST levied by GOi&GOMinallrespect,railwayfreight, insurance, unloading fromrailway wagon, loadingintotruckIransporltostore/she, unloading,stacking etc. complete as directed by Engineer -In- charge. (for 2.75 m bare pipe)DI 100 mm Double flanged |
| 83 | Item No 3 :- Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete100mm sluice valves - PN - 1 |
| 84 | Item No 4:- Providing and supplying ISI standard D.I.specials & fitting with sealing rubber cascade of SBR complete with cast iron follower gland and MS nut bolts coated or otherwise protected from rusting and suitable for DI pipes inlcuding cost of labour, Materials, and transportation to stores/site, loading and unloading excluding GST levied by GOI and GOM in all respect, Complete as per IS 9523 for all types of specials, bends, tees etc. 9(80 to 300 mm dia)5 |
| 85 | Item No 5: -Providing and constructing B.B. masonry valve chamber with 15cm thick 1:3:6 proportion PCC bedding, Excluding excavation, B.B. masonry in cement mortar 1:5 proportion pre-cast RCC frame and cover etc. complete as directed by engineer-in-charge. Chamber size 60x45x120 cm. Wall thickness 0.23m upto depth of 1.2m.For 60x45x90, Rate = 6595For 0.3m depth =1452Total= 6595+1452 = 8047 |
| 86 | Rate AnalysisSand Lead Charges 105 kmConcrete Qty0.01 MLD - 10.6M3 Qty for ESRfor 0.01 MLD 10.6 M3for SandQty45% of Concrete Qty 4.77 M3 X 1281.89 |
| 87 | Item No. 1: Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.Note:- H.D.P.E. Pipes shall be as per latest IS Specifications Also HDPE pipes upto 110 mm Dia shall be in coil form63 mm dia HDPE PN 6 Pipes |
| 88 | 75 mm dia HDPE PN 6 Pipes |
| 89 | 90 mm dia HDPE PN 6 Pipes |
| 90 | Item No. 2: ProvidingHDPE Specialsasperstandard specifications&directionofinchargeEngineer.(10%of Item No.1) |
| 91 | Item No. 3: Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. completeSluice valves 65 mm DiaBasic Rate Rs4966.00MJP SOR2021-22 P No 132 ; INo 2a ii |
| 92 | Sluice valves 100 mm DiaMJP SOR2021-22 P No 132 ; INo 2a ivBasic Rate Rs6835.00 |
| 93 | Item No. 4: Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete without bypass arrangementSluice valves 65 mm Dia forWashoutBasic Rate Rs4966.00MJP SOR2021-22 P No 132 ; INo 2a ii |
| 94 | Sluice valves 100 mm Dia forWashoutMJP SOR2021-22 P No 132 ; INo 2a ivBasic Rate Rs6835.00 |
| 95 | Item No. 5: Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete.Air Valve 25 mm DiaMJP SOR2021-22 P No 135-136 ; INo 5 a iiiBasic Rate Rs1054.00 |
| 96 | Item No. 6: Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-1/259)Earth SoilsMJP DSR 2021-22 P No 42; I No1Basic Rate Rs150.00HILLY AREA/MMRDATotal Rate |
| 97 | Item No. 7: Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (BdA-3/259)HMBMJP DSR 2021-22 P No 42; I No3Basic Rate Rs192.00HILLY AREA/MMRDATotal Rate |
| 98 | Item No. 8: Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-incharge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259)Soft RockMJP DSR 2021-22 P No 42; I No5Basic Rate Rs572.00HILLY AREA/MMRDATotal Rate |
| 99 | Item No. 9: Excavation in foundation /pipe trebches in hard rock and concrete road by chiselling wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavateed matereials upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-In-Charge.Normal dewateringexcluudong backfilling etc. complete by all means(Bd-A-6/259)Hard RockMJP DSR 2021-22 P No 43; I No7Basic Rate Rs1017.00HILLY AREA/MMRDATotal Rate |
| 100 | Item No. 10: Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-10/263)MJP DSR 2021-22, P. No. 45, It No. 16Basic Rate Rs84.00HILLY AREA/MMRDATotal Rate |
| 101 | Item No. 11: Lowering, Laying and Jointing H. D. P. E./M.D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II63 mm dia HDPE PN 6 PipesBasic Rate Rs45.00HILLY AREA/MMRDATotal Rate |
| 102 | 75 mm dia HDPE PN 6 PipesBasic Rate Rs48.00HILLY AREA/MMRDATotal Rate |
| 103 | 90 mm dia HDPE PN 6 PipesBasic Rate Rs67.00HILLY AREA/MMRDATotal Rate |
| 104 | Item No. 12: Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.)Sluice Valve 65 mm DiaBasic Rate Rs1251.00HILLY AREA/MMRDATotal Rate |
| 105 | Sluice Valve 100 mm DiaBasic Rate Rs2272.00HILLY AREA/MMRDATotal Rate MJP SOR2021-22 P No 135 ; INo 42 |
| 106 | Item No. 13: Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.)Sluice valves 65 mm Dia forWashoutBasic Rate Rs1251.00HILLY AREA/MMRDATotal Rate |
| 107 | Sluice valves 100 mm Dia forWashoutBasic Rate Rs2272.00HILLY AREA/MMRDATotal Rate MJP SOR2021-22 P No 135 ; It No 4 |
| 108 | Item No. 14: Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves)Air valves 25 mm DiaMJP SOR2021-22 P No 137 ; It No 10 aBasic Rate Rs218.00HILLY AREA/MMRDATotal Rate |
| 109 | Item No. 15: Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer -in- charge for following diameters of pipe lines (type design attached.)Foundation on Murum and Harder Strata.upto 150mmMJP SOR2021-22 P No 140 ; INo 17 a iBasic Rate Rs5578.00HILLY AREA/MMRDATotal Rate |
| 110 | Item No. 16: Providing and laying in situ Cement Concrete of trap/ granite / quartzite /gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering,form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)a) 1:2:4 (M-150) grade for Thrust BlocksMJP SSR 2021-22, Corrigendum No 9, Date 6-5-22 Pg No 4, It no 1 bBasic Rate Rs6204.00HILLY AREA/MMRDATotal Rate |
| 111 | Item No. 17: Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge.As above of 90 x 60 cm internal size and depth upto 1.2 M with precast R.C.C slab cover.MJP SSR 2021-22, P. No. 220, I. No. 1cBasic Rate Rs10624.00HILLY AREA/MMRDATotal Rate |
| 112 | Item No. 18: Refillingthetrencheswithavailableexcavatedstuffwith soft materialfirst over pipeline andthen hardmaterial in 15cmlayerswithallleadsandliftsincluding consolidation, surcharging, etc. completeMJP SSR 2021-22, P. No. 45, It. No. 15Basic Rate Rs84.00HILLY AREA/MMRDATotal Rate |
| 113 | Item No. 19: ProvidingandmakingHDPE/PVC pipeconsumer serviceconnectionondistributionmainbydrilling holes with suitable means, including all labour. HDPE/PVCpipeofrequiredlengthwithorwithout roadcrossingasdescribedbelowincluding saddle/clampsaddleofsuitablematerial---as directed by Engineer in charge.Withroadcrossing15mmserviceconnectionwith road crossing (without watermeter)MJP DSR 2021-22, P. No. 66 I. No. 17Basic Rate Rs3115.00Total Rate |
| 114 | Item No. 20: Hydraulic testing of H. D. P. E./ M. D. P. E./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.63 mm dia HDPE PN 6 PipesBasic Rate Rs4961.00HILLY AREA/MMRDA |
| 115 | 75 mm dia HDPE PN 6 PipesBasic Rate Rs4961.00HILLY AREA/MMRDATotal Rate |
| 116 | 90 mm dia HDPE PN 6 PipesBasic Rate Rs7442.00HILLY AREA/MMRDATotal Rate (MJP SSR2021-22 P No 115 ; It No 3) |
| 117 | Item No. 21: Providingandfixingboarddisplayinginformation, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangularshapeof1.20mx0.90msize made out 18 gauge (1.25 mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stoveenamelonbacksideandborder/messages /symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x35 x3 mm frame with properly cross braced M.S.angles of size 35 mm x 35 mm x 3 mm duly painted including Two M.S.angle iron posts of size 65 mmx 65 mmx 6 mm, 3.65mlongpaintedwithalternateblackandwhite bandsof25cmwidthincludingallfixturesetc.and fixing the boards in 1:4:8 concrete block of size 60 cm x60cmx75cmincluding,excavation,refilling, transportation,andlabouretccomplete.Spec. Number As directed by Engineer in Charge MORTH 801PWD SSR 2022-23I. No. 6.36 , P No 71, S.No 289, It No 6.36Basic Rate Rs 10010.00HILLY AREA/MMRDATotal Rate |
| 118 | Item No. 1: Providinq andLayinq insituCement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and beddinq including baidng outwater,form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum)b) In PCC M-150MJP DSR 2021-22, 9th Corrigendum Pg N 4 Item No 1.Road Restoration Work1. Concrete Road2. Bitumen Road3. Paver BlockBasic Rate Rs6204.00HILLY AREA/MMRDATotal = |
| 119 | Item No. 1: Providing & streching transmission line & making Additional electric load connection to Head works, including all charges as per MSEB ruleProvision For Increase In Demand At Raw Water & New Connection At WTP |
| 120 | ITEM NO. 1: Commissioning, running and maintaining the scheme to quantities, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and for regional scheme, together with training of personnel spared by MJP / Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer-in-charge.Note: Required chemicals to be supplied by Department free of cost and electricity bill will also be paid by the Department.For Single Village Without WTPM.J.P.D.S.R. 21-22,Pno.232, I no.1,eHILLY AREATOTAL RATE PER MONTHTOTAL |
| 121 | Add 18% GST |
AI Tender Summary
Tender Timeline
Nov 28, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedDec 05, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 06, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender