Maintenance And Repair I.E. Floor Tiles, Chowkhats, Distempering And Painting And Ph Items In Officers Residence No.3 In Mdu, Rohtak- Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4 Mm Thick Float Glass Panes, Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws. Kiln Seasoned And Chemically Treated Hollock Wood 30 Mm Thick 2 Providing And Fixing Wire Gauge Shutters Using Galvanized M.S. Wire Gauge Of Average Width Of Aperture 1.4 Mm In Both Directions With Wire Of Dia 0.63 Mm, For Doors, Windows And Clerestory Windows With Hinges And Necessary Screws: 30 Mm Thick Shutters Kiln Seasoned And Chemically Treated Hollock Wood 3 Providing And Laying Vitrified Floor Tiles In Different Sizes ( Thickness To Be Specified By The Manufacturer ) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1 :4 ( 1 Cement : 4 Coarse Sand ) , Jointing With Grey Cement Slurry @ 3.3 Kg / Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm 4 Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Metres Lead 5 Providing And Laying Vitrified Tiles In Different Sizes ( Thickness To Be Specified By Manufacturer ) , With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1 :3 ( 1 Cement: 3 Coarse Sand ) , Jointing With Grey Cement Slurry @ 3.3 Kg / Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm 6 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1 :4 ( 1 Cement: 4 Fine Sand ) 7 Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. For Thickness Of Tiles 10 Mm To 25 Mm 8 Providing And Fixing 1St Quality Ceramic Glazed Wall Tiles Conforming To Is : 15622 ( Thickness To Be Specified By The Manufacturer ) Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1 :3 ( 1 Cement: 3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete 9 Providing And Fixing Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I / C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Outer Dia Pipes 10 Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690 Gms. 15 Mm Nominal Bore 11 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 15Mm Nominal Bore 12 Providing And Fixing 600X450 Mm Bevelled Edge Mirror Of Superior Glass ( Of Approved Quality ) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. 13 Providing And Fixing White Vitreous Chinaware Pedestal Type Water Closet ( European Type W.C. Pan ) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device ( Handle Lever ) , Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 14 Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface: Water Thinnable Cement Primer 15 Removing Dry Or Oil Bound Distemper, Water Proofing Cement Paint And The Like By Scrapping, Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete Asian / Nerolac / Berger Make. 16 Providing And Applying Two Coats White Cement Based Putty Of Approved Brand And Manufacturer, Over Plastered Surface And Grinding The Surface Smooth With Sand Paper To Get En Even And Smooth Finish Including Cost And Carriage Of All Material , Labour Charges, Scaffolding, Sundries Etc. Complete Asian / Nerolac / Berger Make. 17 Distempering With 1St Quality Acrylic Distemper ( Ready Made ) Having Voe Content Less Than 50 Gm Per Litre. Of Approved Manufacturer And Of Required Shade And Colour Complete. As Per Manufacture RS Specification. One Or More Coats On Old Work 18 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade One Or More Coats On Old Work 19 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade: Old Work ( Two Or More Coat Applied @ 1.67 Litre / 10 Sqm ) On Existing Cement Paint Surface 20 Demolishing R.C.C. Work Manually / By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer - In Charge. 21 Providing & Fixing Uv Stabilised Fibreglass Reinforced Plastic Sheet Roofing Up To Any Pitch, Including Fixing With Polymer Coated J Or L Hooks, Bolts & Nuts 8Mm Dia. G.I Plain / Bitumen Washers Complete But Excluding The Cost Of Purlins, Rafters, Trusses Etc. The Sheets Shall Be Manufactured Out Of 2400 Tex Panel Rovigs Incorporating Minimum 0.3% Ultra-Violet Stabiliser In Resin System Under Approximately 2400 Psi And Hot Cured. They Shall Be Of Uniform Pigmentation And Thickness Without Air Pockets And Shall Conform To Is 10192 And Is 12866.The Sheets Shall Be Opaque Or Translucent, Clear Or Pigmented, Textured Or Smooth As Specified. 2 Mm Thick Flat 22 Steel Work In Built Up Tubular ( Round, Square Or Rectangular Hollow Tubes Etc. ) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. Electric Resistance Or Induction Butt Welded Tubes 23 Pressed Steel Sheet Frames ( Chowkats ) Consisting Of 2 Mm Thick Steel Sheet Of The Specified Section, Including Iron Lugs ( Hold Fasts ) Iron Hinges, Including Bolts For Fixing Stops, Locknotch, Provision For Receiving Tower Bolts, And Finished With One Coat Of Ready Mixed Paint Red Lead Non-Setting Primer, Of Approved Quality, Fixed In Position Including The Cost Of Cement Concrete 1:3:6 For Filling In The Frame, And Cement Concrete 1:3:6 For Lugs Complete . ( A ) Door And Window Frame Of Size 89Mm X 50Mm With 40 Mm Wide Single Rebate. 24 Door And Window Frame Of Size 127Mm X 50Mm With 40 Mm Wide Double Rebate. 25 Credit For Tmt Bares ( Reinforcement ) From Dismantling Of Rcc
