|
| 1 | Earth work in excavation by mannual means over areas (exceeding 30cm and upto 1.5m in depth and width as well as 10 Sqm in Plan) including disposal of excavated earth upto 1m cutting edge, disposed earth to be levelled and neatly dressed in all kinds of soil. |
| 2 | Earth work in excavation by mannual means over areas (exceeding 30cm and upto 1.5m in depth and width as well as 10 Sqm in Plan) including disposal of excavated earth upto 1m cutting edge, disposed earth to be levelled and neatly dressed in ordninary rock |
| 3 | Providing and laying of dry Stone soling in horizontal on level. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.1:4:8 (1 cement : 4 coarse sand : 8 graded stone agg. 40 mm nominal size Crushed |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 7 | Centring and shuttering including strutting, propping etc, and removal of form work for Foundations, footings, bases for columns |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for: walls of anythickness |
| 9 | Reinforcement for RCC work including straightning, cutting, bending, binding. T.M.T bars |
| 10 | b) Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide aperture with matching wood beading |
| 11 | c) Float glass panes of 4 mm thick glass pane (weighing not less than 10 kg/sqm) for exterior Window Shutters |
| 12 | Providing , hoisting, trusses, perlins, rafters, posts or like componants including cost of screws, nails complete ist class badloowood |
| 13 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 14 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 15 | Applying priming coat With Ready Mixed Red Oxide Zinc Chromate Primer of approved brand on Steel Works: |
| 16 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats. |
| 17 | 12mm Thick cement sand plaster finished with a floating coat neat cement of mix 1:3 |
| 18 | Providing and fixing 80mm dia PVC pipes for areation purpose |
| 19 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 20 | Providing corrugated G. S. sheet roofing including vertical/curved surfacefixed with polymer coated J or L hooks, bolts and nuts 8mm diameter withbitumen and G.I limpet washers or with G.I. limpet washers filled withwhite lead,including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch inhorizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 21 | Providing and fixing rods of 1.25mm thick crominium plated brass plates with 2 cromium plated brass brackets fixed with CP brass screws and wooden plugs etc. whatever necessy complete 25mm dia |
| 22 | Electrification of pump House by providingfixing/fittings wire switches, channels, boxes,Boards,MCP etc. of standard qualities ISI mark etc (complete job) |
| 23 | a) Heating Point |
| 24 | b) Lighting Point |
| 25 | Providing and fixing of service line of approved quality |
| 26 | Providing and fixing GI Chain Link fabric fencing of 4mm dia wire of required width in mesh 50mmx50mm including cost of nuts and bolts, washers as required at site with all carriages (Complete Job) |
| 27 | Providing and fixing of 100mm dia MS flanges including cutting, welding insertion of rubber gasket, fixing of nuts and bolts complete job |
| 28 | Providing and fixing of 80mm dia MS flanges including cutting, welding insertion of rubber gasket, fixing of nuts and bolts complete job |
| 29 | Providing and fixing of nuts and bolts and chip including one end fix anchor block |
| 30 | Laying and fitting of pipes excluding cost of pipes |
| 31 | 65mm dia GI |
| 32 | 50mm dia GI |
| 33 | 40mm dia GI |
| 34 | 25mm dia GI |
| 35 | 20mm dia GI |
| 36 | 15mm dia GI |
| 37 | Filling available excavated earth (excluding rock) in trenches, plinth, sides offoundations etc. in layers not exceeding 20 cm in depth, consolidating each depositedlayer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 38 | Laying in position centrifugally cast (spun) iron S&S or flanged pipes ( Excluding cost of pipes) |
| 39 | Providing push on joints tocentrifugally cast (spun) iron S&S or flanged pipes or ductile iron pipes including testing of joints |
| 40 | 200mm dia DI |
| 41 | 150mm dia DI |
| 42 | Carriage ofMaterials by Mechanical transport from different sources to nearest dumping site of work including loading, unloading |
| 43 | Cement & Steel Avg lead 15 Km |
| 44 | Sand and Bajree for average lead of 25 Km |
| 45 | Stone Soling for25 Km |
| 46 | Carriage of Pipes from Divisional Storeto dumping siteby M T for average 05km |
| 47 | Carriage of 200mm dia D.I Pipes from Divisional Storeto dumping siteby M T for average 05km |
| 48 | Carriage of 150mm dia D.I Pipes from Divisional Storeto dumping siteby M T for average 05km |
