Public Health Engineering Department-PHED has published Tender For Replacement Of Old Pumpset And Rejuvenation Of Ninder Pump House Under The Jurisdiction Of City Div. Iv (North) Jaipur. Submission Date for this Tender is 05-12-2022. Submersible Pump Tenders in jaipur Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing, lowering,aligning, fixing inposition inpipe line, CI D/F Sluice valves straightandpocketlessbodypassageofapprovedmakeof following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200Stem - AISI- 410 ,Body Seat ring, Wedge facingring&Bushes-LTB2/SS ,FacetofacedimensionsasperIS14846/2000 (amendeduptodate),Epoxy(Non-Toxic-suitablefordrinkingwater)applied inside and outside,Flanges Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 andIS:1367/CS/galvanisedsteel InsertionrubberofblackEPDM6mmthick. Sluice valves including all jointing & jointing material, labour, testing and commissioningalongwithpipelineasperTechnicalSpecificationsandasper direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. |
| 2 | Manually Operated CI Sluice valve of Class PN-1.0 |
| 3 | 150mm HW |
| 4 | Providing, lowering, aligning, fixing in position in pipe line, CI double flanged swing type NonReturnValves(NRV) ofapprovedmakeoffollowingPressurerating& dia complete, confirming to IS: 5312 (part -1)/ 2004 (amendedup to date) and of followingspecifications:Body,Cover&discofGreycastironofIS:210/FG200. FacetofacedimensionsasperIS5312(part-1):2004,FlangesDrilledasper IS:1538.Epoxy (Non-Toxic&suitablefordrinkingwater)appliedonbody,cover anddiscinsideandoutside.BodyseatringofSS/CSDoorfacering-EPDM/ Neoprene (food grade quality) ,Shaft ofSS- AISI- 410 ,Hinge Malleable cast iron / SS AISI 316 ,Bonnet Gasket EPDM, Bush- Leaded tin Bronze/ PTET, Gasket EPDM/NBR ,Nut-BoltasperIS:1363andIS:1367(galvanisedsteel),Insertion rubber of black EPDM 6mm thick. Suitable support structureas perdirections of EIC including jointing & jointing material, labour, testing and commissioning along withpipelineasperTechnicalSpecification&asperdirectionofEngineer-in- charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. |
| 5 | Class PN 1.0 |
| 6 | 150mm HW |
| 7 | Providing and fixing of flanged/ plain ended MS Specials made fromMS sheet strips of relevant IS specification of approved thickness bywelding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes,material,labour, inside lining, outside coating, testing and commissioningalong with pipe line as per technical specifications and direction of Engineer-in-charge. |
| 8 | MS pipe specials upto 600mm dia (with minimum 5mm thickness sheet) |
| 9 | Providing and fixingat site with necessary packing,Horizontal Centrifugal Split Casting pumps with 4 poleinduction motor operating at syncronised speed of speed 1500 RPM as per IS 12615: 2011 or amended up to date , CI casing and casing ring, SS 316 impeller, SS 410 Shaft and shaft sleeve, coupling guard, common base plate, foundation bolts, Cement concrete foundation etc. complete with all respect as per the specification and scope of work and direction of Engineer in Charge of following range of duty conditions. Note: Duty condition of required pump shall also be mentioned in BoQ. |
| 10 | Discharge 20 to 30 LPS and head 41 to 50 M |
| 11 | SITC STAR DELTAStarter type LT Panel of followingrating, all switchgears are of PHED approved makes, CRCA sheet of Panel enclosure is of TATA/ Essar 1.6mm/ 2.0mm thickduly Electrostatic Powder Coated with angle frame includingotherancillaries(Insulators,AcrylicSheet,BacklightSheet, Hardware,Wire,NamePlates,Lugs,PvcChannel,McbChanel,Lock, Hing,Bidding,Connectors,NeutralLinks,Spiral,Saddle&Packing Material)etc. and 110A/125A, TPN aluminium Bus bar with colour coated geat shirnkage sleeves complete asperTechnicalSpecificationsandasper direction of Engineer-In-Charge. |
| 12 | STAR DELTA STARTER 22.0 KW (30.0 HP)- :For 2 motors (1 W+ 1S) I/C- MCCB 125A TPN 25 KA With T/M Based Over Current & Short Circuit Protection (1),Spreaders (2),Extended Rotary Handle (1) , Analog Voltmeter96*96mm(0-500V)(1),VoltSelectorSwitch(1),Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 125/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue-1)(1),ControlMCB6ASP10KACCurve(3) and O/G- MCCB100ATPN25KAWithT/MBasedOverCurrent&Short Circuit Protection (2), Power Cont 40A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (23-32A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Preventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 12.5 Kvar (2), S/D Timer(2) |
| 13 | Supply&FixingXLPEinsulated/P.V.C.sheathedcableof1.1KVgradewith aluminium conductor Armoured of IS:7098-I/1554-1 approved makein ground asperIS:1255includingexcavationof30cmx75cmsizetrench,25cmthick underlayer ofsand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. |
| 14 | 35 Sq.mm, 3.5 core |
| 15 | Providing,lowering,laying,aligning,fixinginpositionandjointingCIdismantling joint(SuitableforSluicevalvesetc.)asperISspecifications complete of the following sizes including alljointingmaterial, cost of all labour, testing and commissioning Technical Specifications and as per directionof Engineer.Class PN 1.0 |
| 16 | 150mm |
| 17 | ConstructionofPumphouseofrequiredsizesuitableforinstallationof maximum 4 no. monoblock pump sets as per approved GA drawing, scope of work and technical specification complete work in all respect including electrical works for lighting and fans, rain water drainage. The plinth area of pump house shall be area of measurement. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
