Tender For Const. Of Rcc Intake Well Cum Pump House Weir Rcc Gangway Wtp Rcc Esr Rcc Gsr Staff Quarter Compound Wall Nh Crossing Approach Road Pipeline House Connection Etc All Complete Job For Raidih Block Rural Water Supply Scheme., Gumla-Jharkhand

TDR : 35008453

Tender Notice
BOQ

Expired

Gumla , Jharkhand

Tender Brief : Tender For Const. Of Rcc Intake Well Cum Pump House Weir Rcc Gangway Wtp Rcc Esr Rcc Gsr Staff Quarter Compound Wall Nh Crossing Approach Road Pipeline House Connection Etc All Complete Job For Raidih Block Rural Water Supply Scheme.

Document Fees
₹ 10000 /-

EMD
₹ 7323000.0 /-

Tender Value
₹ 73.22 Crore /-

Submission Date
06-12-2022

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	WATER TREATMENT PLANT
2	Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authority and Providing all labours and necessary equipment for designing & construction of Conventional WTP of 5.50 MLD capacity. With all complete job. (Please refer to Section 5, Sl. 2.3 of SBD)
3	Elevated Service Reservoir
4	Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authority and Providing all labours andequipment for designing & construction ofESR all complete job. (Please refer to Section 5,Sl.2.8 of SBD)
5	ESR
6	Zone - 1 ESR Capacity 5,90,000 Litres, Staging height - 20 M
7	Zone - 2 ESR Capacity 5,00,000 Litres, Staging height - 07 M
8	Zone - 3 ESR Capacity 2,80,000 Litres, Staging height - 20 M
9	SUMP
10	Capacity 4,00,000 Litres,
11	Intake Well With Pump House 6.00 M dia. 15.23 M Depth
12	Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authority and construction of R.C.C Intake well with Pump house all complete job. (Please refer to Section 5,Sl. 2.1 of SBD)
13	Earthworkinexcavationof foundationtrenchesof toe wall, spillway , head regulator, outlet , intake well etc. as per designed section in all kind of soil including moorum soil , soil mixed with kankar, pebbles and boulders upto 300 mm size and disposal of the same(beyond 50m away from the edge of the trenches) with initial lead of 150m and initial lift of 1.5m as per specification and direction of E/I.
14	Initial Lift
15	1st Lift
16	Earthwork in excavation of foundationtrenches of toe wall,spillway,head regulator,outlet,intake well etc. as per designed section in ordinary rock or soft rock (vide classification of soil item-C) with disposal of soil (beyond 50m from the edge of the trenches) with initiol lead of 1.5m as per specification and direction of E/I. (soft rock where blasting as required and approved by the concerned Chief Engineer.)
17	2nd Lift
18	3rd Lift
19	4th Lift
20	Earthwork in excavation of foundation trenches of toe wall, spillway,head regulator,outlet,intake well etc. as per designed section in Hard rockwhere blasting is needed and stacking properly in approved stack size in approved stack yard (beyond 50m from the edge of the trenches in the country side) with initial lead of 150 m & initial lift of 1.5 m as peras per specification and direction of E/I. (Excavated Hard rock should not be more than 150 lb)
21	5th Lift
22	6th Lift
23	Providingand laying P.C.C or R.C.C. M-150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6 mm size graded and clean course sand F.M.2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of Engineer-in-Charge.
24	Providing and laying in situ Cement concrete of trap/ granite/quartzite/gneiss metal for RCC work in foundation like raft, grillage,strip foundation and footing of RCC columns and steel stanchions including normal dewatering, plywood form work, bully/steel propups, compaction,finishing and curing,etc, complete.(By weigh batching and mix design for M-300.(excluding M.S. or Tor)
25	Providing and costing in situ cementconcrete of trap/ granite/quartzite/gness metal of approved quilty for R.C.C work as per detailed drawing and designs or as directed by Engineer-in-Charge including narmol dewatering, sentering plywood, formwork bully/steel prop-ups, compaction finishing the formed surface with 1:3 sufficeint minimoum thickness if special finish is to be provided and curing etc complete (excluding the cost of reinforcement)
26	Providing and costing in situ cement concrete of trap/ granite /quartzite/gness metal of approved quilty for R.C.C work as per detailed drawing and designs or as directed by Engineer-in-Charge including narmol dewatering, centeringplywood, formwork bully/steel prop-ups, compaction finishing the formed surface with 1:3 sufficeint minimum thickness if special finish is to be provided and curing etc.complete (by weighbacthing and mix design for M-250 only .excluding the cost of reinforcement.
27	Providingand costing in situ cementconcrete of trap/ granite/quartzite/gness metal of approved quilty for R.C.C work as per detailed drawing and designs or as directed by Engineer-in-Charge including narmol dewatering,sentering plywood, formwork bully/steel prop-ups, compaction finishing the formed surface with 1:3 sufficeint minimoum thickness if special finish is to be provided and curing etc. complete (by weighbacthing and mix design for M-150only. (excluding the cost of reinforcement.
28	Providing RCC M 200 with nominal mix (1:1.5:3)in columns with approved quality of sone chips 20 mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including screaning, suttering mixing cement concretein mixer and placing in position, vibraction,striking,curing (but excluding the cost of reinforcement) taxes and royalty all complete job as per specification and direction.
29	Providing RCC M-200 with nominal mix (1:1.5:3) in band at lintel level with approved quality of sone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including screaning, suttering mixing cement concrete in mixer and placing in position, vibraction, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete job as per specification and direction E/I.
30	Providing RCC M 200 with nominal mix (1:1:5:3) in roof slab of all types with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position ,vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specificationand direction of E/I.
31	Providing 63 mm average thick RCC M-150 with nominal mix of (1:2:4) in chhajja with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3 ncluding, taking drip course in concrete screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, 6 mm thick cement plaster (1:4) in ceiling and sides of chhajja with sand ofFM 1.5, curing (but excluding the cost of reinforcement) taxes and royalty all complete asper building specification and direction of E/I.
32	Providing tor steel reinforcement of 10 mmdia. As per approved design and drawing excluding carriage of MS rods to work site cutting, bending, and binding with annealed wire with cost of wire removal of rust, placing the rods in position all complete as per building specification & direction of E/I.
33	Providing designation 75A brick work in CM 1:6 in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, costs of screening, materials, scaffolding, racking out joints to 15 mm depth curing, taxes and royalty all complete as per building specification & direction of E/I.
34	Providing for Precast Cement concrete Jali (1:2:4) graded stone aggregate 6 mm nominal size, reinforced with 1.6 mm dia M.S. wire including centering Shuttering, firing & finishing in c.m (1:3) etc.. All complete.(50 mm thick.)
35	Supplying fitting and fixing fully glazed steel door window or ventilators of standard rolled Z and mullion section and sizes as per I.S.-1038 joints met and welded with 100 x 16 x 3 mm MS lugs fixed in cement concrete (1:2:4) blocks 15x10x10 cm size including cost of oxidized iron fitting with hinges,handle per teps, catch springs 3mm thick plain glass panes with Aluminium beads and inner frame fixed with lugs of 20 mm long 6.3 mm G.I.counter sunk machine screw and nuts and applying a coat of red lead paint,carriage to work site hoisting and placing in position in all storey and taxes all complete as per building specification and direction of E/I.
36	Supplying F/F MS grill made of 20 x 6 mm MS flat as per approved design and drawing with all complete.
37	Supplying fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2 mm at 100 mm .Centers and braced with M.S. flat diagonals 20 x 3 mm with top & Bottom rails of T-iron 40x40x6 mm with 38 mm dia steel pulleys complete with bolts,nuts locking arrangement stoppers handles including applying a priming coat of red lead paint, carriage hoisting and taxes all complete as per building specification and direction of E/I.
38	Providing 12 mm thick cement plaster (1:6) with cleancoarse sand of FM 1.5including screening, curing with all leads andlifts of water scaffolding taxes and royalty all complete as per building specification and direction of E/I.
39	Providing 12 mm thick water proof cement plaster (1:3) with clean coarse sand of FM 1.5 with 5% cico or any other water proofing compound including screening curing,with all leads and lifts of water, scaffolding taxes and royalty all complete as per buildingspecification and direction of E/I.
40	Providing 6 mm thick cement plaster (1:4) in ceiling with clean coarse sand of FM 1.5 including screening ,curing with all leads and lift of water ,scaffolding taxes and royalty all complete as per building specification and direction of E/I.
41	Providing two coat of snowcem of approvedshade and make over a coat of cement of primer on new surfaceincluding preparing the plasterded surface smooth with sand paper, scaffolding,curing and taxes all complete as per building specification and direction of E/I.
42	Providing two coat of painting with ready mixed paint of approved shade and make oversteelsurface including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I.
43	Providing R.S.Joist ISMB 350 x 140 mm size fitting and fixing in position including cutting to required in shape and size, its carriage applying a primer coat of red lead paint etc all complete as per building specification and direction of E/I.
44	Two nos. for Base of pump i.e. ground floor
45	One nos. below roof i.e. first floor
46	Providing & Fixing G.I.Pipe Railing having 1.0 m height consisting 50 x 50 x 6mm thick M.S.Angles as verticals at 1.5 m c/c, and additional poles at every corner with three rows of 25 mm dia G.I.pipes of medium class variety as horizontal &painting three coats of oil paint over 1 coat of anticorrosive paint of approved colour & shade including cost of all labour,transporting bends to urved shape, etc.complete.
47	Supplying equipment and labour for back filling the excavated earth around steining well all complete as per specification and direction of E/I.
48	Supplying Labour and tools for fixing C.I. sluice valve in trenches with a pair of C.I. Tail piece including makinglead caulked joints and flanged joints as per I.S.S. specification, including supplying all jointing materials (Piglead confirming to I.S.S. 782-1978, yarn confirming to I.S.S.6587-1972 and nuts and bolts confirming toI.S.S.1364 -1983) includingdrilling holes in flanges if requiredas per specification anddirection ofE/I.
49	SupplyingLabour and tools for fixing C.I. sluice valve in trencheswith a pairof C.I. Tail piece including makinglead caulked joints and flanged joints as per I.S.S. specification, including supplying all jointingmaterials (Pig lead confirming to I.S.S. 782-1978, yarn confirming to I.S.S.6587-1972and nuts andbolts confirmingtoI.S.S.1364-1983) includingdrilling holes in flanges if requiredas per specification anddirection ofE/I.
50	Providing ,supplying & laying ISI standard C.I. specials & fitting with 600 mm dia double flanged tail piece 2 nos,wheel stand 2 nos., CI strainer (surface area 3.50 sqm) 2 nos., 32 mm Dia rod approx 11 m long complete withM.S. nut & boltscoatedor otherwise protectedfrom rusting and suitable etc all complete.
51	Supplying materials and labou for fixing 20m dia M.S.bar steps in stening wall of 0.30 m intrenal and staggered in (1:2:4) cement concrete including scaffolding and curing etc.all complete as per specifiction and Direction of E/I.
52	Carriage of material from divisional store are kiln side or quality side to work including contractor profit loading, unloading transportation are complete.
53	Cement10KM lead
54	Steel 10KM lead
55	Sand 36KM lead
56	Bricks06KM lead
57	Stone/Stone Chips11KM lead
58	Doing Geotechnical survey, Collecting field data, designing aesthetically, getting it approved by competent authority and Providing all labours andequipment for designing & CONSTRUCTION OF 3.00 M WIDE AND 140 M LONG APPROACH BRIDGE (GANGWAY) FROM INTAKE TO WTP(pl.refer to Sec-5 Sl.no. 2.2 of SBD for technical specification)
59	Earthwork in excavation of foundation trenches of toe wall, spillway, head regulator, outlet, intake well etc. as per designed section in all kind of soil including moorum soil , soil mixed with kankar, pebbles and boulders upto 300 mm size and disposal of the same(beyond 50m away from the edge of the trenches) with initial lead of 150 m and initial lift of 1.5m as per specification and direction of E/I.
60	Initial Lift
61	1st Lift
62	Earthwork in excavation of foundationtrenchesof toe wall, spillway, head regulator, outlet, intake well etc. as per designed section in ordinary rock or soft Rock (vide classification of soil item-C) withdisposal of soil (beyond 50 m from the edge of the trenches) with initial lead of 1.5 m as per specification and direction of E/I. (soft rock where blasting as required and approved by the concerned Chief Engineer.
63	2nd Lift
64	Providing P.C.C. M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing taxes and royalty all complete as per building specification and direction of E/I.
65	Providing and castingin situ Cement concrete of trap/ granite/quartzite/ gneiss metal for RCC work as per detailed drawing and designs or as directed by Engineer in Charge including normal dewatering, \"plywood form work, bully/steel propups, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-300 (excluding M.S. or Tor In RCC M-300) For Columns
66	Providing and castingin situ Cement concrete of trap/ granite/quartzite/ gneiss metal for RCC work as per detailed drawing and designs or as directed by Engineer in Charge including normal dewatering, \"plywood form work, bully/steel propups, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-300(excluding M.S. or Tor In RCC M-300) For Bracings
67	Providing and castingin situ Cement concrete of trap/ granite/quartzite/ gneiss metal for RCC work as per detailed drawing and designs or as directed by Engineer in Charge including normal dewatering, \"plywood form work, bully/steel propups, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-300(excluding M.S. or Tor In RCC M-300) For Bracings
68	Providing and castingin situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work as per detailed drawing and designs or as directed by Engineer in Charge including normal dewatering, \"plywood form work, bully/steel propups, compaction , finishing and curing, etc, complete. (By weigh batching and mix design for M-250(excluding M.S. or Tor In RCC M-250) In Gangway floor beam
69	Providingand costing in situ cementconcrete of trap/ granite/quartzite/gness metal of approved quilty for R.C.C work as per detailed drawing and designs or as directed by Engineer-in-Charge including narmol dewatering, sentering plywood, formwork bully/steel prop-ups, compaction finishing the formed surface with 1:3 sufficeint minimoum thickness if special finish is to be provided and curing etc. complete (by weighbacthing and mix design for M-250only . (excluding the cost of reinforcement.)
70	Providing tor steel reinforcement of 10 mm dia. As per approved design and drawing excluding carriage of MS rods to work site cutting, bending, and binding with annealed wire with cost of wire removal of rust, placing the rods in position all complete as per building specification & direction of E/I.
71	Providing 12 mm thick cement plaster (1:4) with approved quality of sand of requisite F.M. (2.5 to 3.0) washed and screened including curing, scaffolding wherever required and its removal royalty and all taxes etc. complete job as per specification & direction Of E/I.
72	Providing 6 mm. Thickcement plaster (1:4) inceiling with clean coarse sand of F.M. 1.5 including screening, curing with allleads& liftsof water, scaffolding taxes & royalty all complete as per building specification & direction of E/I.
73	Providing and fixing GI pipe railing having 1.0 M height consisting 50x50x6 mm thick MS angles as verticals at 1.5 m c/c and additional posts at every corner with 3 rows of 25 mm dia GI pipes of medium class veriety as horizontal and painting 3 coats of oil paint over one coat of anticorrosive paint at approved colour and shade including cost of all labour, transporting bends to curved shape etc. complete
74	Provide two coat of snowcem of approved shade & make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding, curing & taxes all complete as per building specification & direction of E/I.
75	Supplying equipment and labour for back filling the excavated earth around steining well all complete as per specification and direction of E/I.
76	Carriage of materials from divisional store or kiln site or quarry site to work site including contract profit, loading, unloading, transportation, etc. all complete.
77	Cement10KM lead
78	Steel10KM lead
79	Sand36KM lead
80	Stone/Stone Chips11KM lead
81	Infiltration Gallery
82	Earthworkin excavation(As per I.S. 3114/1965) for laying of different types and sizes of pipes so as to give one meter average cover over the socket of pipe with disposalof excavated earth within initial lead and lift as perspecification and direction of Engineer-in-charge.
83	Initial Lift
84	1st Lift
85	Providing and Supplying ISI mark Confirming to IS-8329/2000 centrifugally cast (spun) DI pipe for water works with socket and spigot ends in standard working lengths of 4.5,5.5 & 6 m for classification K-9 suitable for push on joint (Rubber gasket D Jointing) with cement mortar lining inside the pipes with outside zinc and bituminous coating (including cost of one gasket for each pipe)Note: - Rates are F.O.R. Jharkhand but excluding of GST.
86	400 mm dia K9
87	Design and Supply of Apollo V- wire screenlaterals Suitable for Infiltration GalleryEnd connection – Suitable flangeDiam. – 08 inch (200 mm)I.D.=205 mm O.D. =221 mmScreen thickness=08 mmSlot – 1.00 mmLength :- 5 Mtr.
88	Supplying labours , tools tackles ,lubricant etc for laying and jointing DI/C.I.S /S tyton pipes(class LA) trenches supplyingrubbber gasket( Rubbergasketconfirming toI.S.S -5382 -1969 ) and makinggasket jointsincludingprovidingnight guard , barrierand red lightto safeguard against accident all complete( Pipeto be supplied depatmentally free of cost and laying of pipes is to be done as per( I.S.S 3114-1985 ) as per design , specification and direction of E /I.(without gasket)
89	400 mm dia (for Header)
90	200 mm dia V Screen pipe
91	Providing,lowering,laying and placing in position shrouding material for porous pipe gallery/slotted pipe gallery trench gallery with all leads and lift in valved screening and washing of materials as per directed by Engineer in Charge.
92	for 40 mm Pebbles
93	for 12 mm to 20 mm Pebbles
94	for 6 mm to 12 mm Pebbles
95	Supplying equipment and labour for back filling the excavated earth around steining well all complete as per specification and direction of E/I.
96	Dewateringthe excavate d trenches and pools of water in the building trenches/pipeline trenches,well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc all complete.
97	Providing, constructing coffer dam in river basin / dam storages as per type design including excavation, filling,the middle portion with B. C. soil (in gunny bags if requried). Providing impervious/ semipervious materials on both side of B.C.soil (in gunny bags if required) including ramming, compacting to the satisfaction of Engineer-in-charge, till the complection of work including dismantling coffer dam after completion of works and disposing off the material as directed by the Engineer-in-charge.
98	Providing & supplying ISI standard DI specials & Fittings with celling rubber gasket & MS nut Boults etc. All complete Flanged
99	RAW WATER PUMPING MACHINERY & ELECTRICAL WORKS AT INTAKE WELL
100	Supply, installation, testing and commissioning of Centrifugal pump sets with allied equipment as under-
101	Supplying, erecting and commissioning of Vertical turbine pump sets (make: Kirloskar /WPIL/ Mather & Platt) as per IS 1710, capable for required discharge and head (mention below), consisting of bowl assemblies, SS/bronze impellers, column assembly, stainless steel pump shaft, line shaft, etc. with all accessories coupled with energy efficient (IE3) squirrel cage induction motor confirming toIS : 12615, having 15% more BHP than that of pump, operating on 1500 rpm, 415V, 3 PH, 50 HZ [make: Kirloskar / ABB/ Marathon/ CGL/ Siemens] all complete with required size of sluice valve and non-return valve, standard fitting, strainers, foot valve, reducer, pressure gauge, MS delivery pipe, common header, nuts & bolts, packings, fitting & fixing, labour & technician, etc. all complete job as per site requirement and direction of E/I. (Note:- Contractor will have to check the design of pump & motor and get it approved by the Department).
102	Discharge - 63 LPS, Head- 30 M. (1W+1S)
103	Main Power Distribution Panel cum MCP for Raw Water to be installed at Intake Well Pump House:- Providing, erecting and commissioning of Floor mounted cubical LT Motor Control Panel board fabricated with MS sheet of suitable guage and size, dust and vermin proof and painted consisting of proper power distribution 4 pole 250A copper busbar, 1 no. incoming feeder of 250A MCCB, 2 nos. outgoing feeder of 100A MCCB for pumps sets,1 no. 100A MCCB outgoing Spare feeder, 2 no. 32A MCBfeeder for lighting and utility, switch disconnected isolator (TPN), Volt-meters, Ampere-meters,selector switches, indicator lamps etc.all complete with internal wiring, protection units/relays and capacitor banks of proper KVAR for Power Factor control, etc. all complete as per site requirement, Instruction of E/I. and IE rules.
104	Providing, erecting and commissioning of assembled Fully Automatic Star Delta starter, in a provided cubical panel to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil, over load relay and ON/OFF push buttons, with necessary material and connected to supply, etc complete.
105	Providing , erecting and commissioning of Power wiring with required 120 Sq mm 3.5 core 1.1KV grade armoured Aluminium Cables,XLPE/PVC insulated armoured cablefromTransformer to MCP at Raw Water Pump House. Laying, jointing and making proper terminations,etc. all complete.
106	Providing , erecting and commissioning of Power wiring with required 25 Sq mm 3 core 1.1KV grade armoured Copper cables, XLPE/PVC insulated armoured cable from Power distribution Panel (MCP) to Motors, including laying on wall or on floor as where required, jointing and making proper terminations, etc. all complete.
107	Earthing: Providing, erecting and commissioning of earthing as per IS 3043 with all Equipments & Materials for each motors.
108	Providing, erecting 100 KVA (Oil cooled) Servo Controlled Sutomatic Voltage stabiliser suitable for out put voltage of 415 volt +/- 1%,3ph,50 Hz with copper wound transformer (Oil cooled) including change over switch, earthing, T- coil,etc all complete as per indian standard
109	Providing , erecting and commissioning of triple spur gear type Chain Pulley Block suitable for capacity as below with 6 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per IS 3832 carrying ISI mark with travelling trolley.(3 Ton capacity)
110	Providing, erecting and commissioning of internal & external lighting by doing wiring and installing lumenaries e.g. suitable wattage of LED light fittings in pump house, gangway etc. all complete as per requirement.
111	Tansformer Installation: Cost of construction of PCC platform/ foundation with DP structure in PSC Pole for above mention transformer with different type of MS channels, M.S. angles, brackets, insulators, AB Switch, three set of horn gap fuse, DO fuse, disc & pin insulator, lightening arrester with earthing, stay sets, nut bolts, fabrication work required for the job, cost of earthing of transformer (Two nos., one no. for neutral and one for body) with all required material, technicians, labours, Grouting, PCC work, fencing, Danger board, testing of transformer oil, fitting, fixing, connecting with HT/LT lines, etc. forpower supply, etc. all complete as per I.E. rules and specification of Jharkhand state electricity board.
112	CLEAR WATER PUMPING MACHINERY & ELECTRICAL WORKS AT WTP
113	Supply, installation, testing and commissioning of Centrifugal pump sets with allied equipment as under-
114	Providing, erecting and commissioning of Multi stage/ HSC Centrifugal pump (make: Kirloskar/WPIL/Mather & Platt) as per IS:5120, capable for required discharge and head (mention below), consisting of SS/ bronze impellers, stainless steel pump shaft, etc. with all accessoriescoupled with energy efficient (IE3) TEFC squirrel cage induction motor confirming to IS:12615, having 10% more BHP than that of pump, operating on 1500 rpm, 415V, 3 PH, 50 HZ[make: Kirloskar /ABB/ CGL/Marathon/Siemens] all complete with required size of sluice valve and non- return valve standard fitting, strainers, reducer, foot valve, pressure gauge, MS delivery & Suction pipe, common header, nuts & bolts, packings, fitting & fixing, labour & technician, etc. all complete job as per site requirement and direction of E/I.(Note:- Contractor will have to check the design of pump & motor and get it approved by the Department)
115	Discharge - 63 LPS, Head- 152 M. (1W+1S)
116	Main Power Distribution Panel cum MCP for Clear Water to be installed at WTP:- Providing, erecting and commissioning of Floor mounted cubical LT Motor Control Panel board fabricated with MS sheet of suitable guage and size ,dust and vermin proof and painted consisting of proper power distribution 4 pole 800A copper busbar, 1 no. incoming feeder of 800A MCCB, 3nos. 400 A MCCB for outgoing feeder of clear water pump sets (with spare feeder),2nos. 100 A & 63A MCCB for WTP. & other Utilities, 2 nos. 32 A MCB for lighting feeder, switch disconnected isolator (TPN), selector switches, Volt-meters, Ampere-meters, indicator lamps etc. all complete with internal wiring, protection units/relays and capacitor banks of proper KVAR for Power Factor improvement for pump sets and other equipments, etc. all complete as per site requirement, Instruction of E/I. and IE rules.
117	Providing, erecting and commissioning of assembled Fully Automatic Star Delta starter, in a provided cubical panel to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil, over load relay and ON/OFF push buttons, with necessary material and connected to supply, etc complete.
118	Providing, erecting and commissioning of Power wiring with required 400 Sq mm 3.5 core 1.1 KV grade armoured Aluminium Cables, XLPE/PVC insulated armoured cable from Transformer to MCP at Clear Water Pump House. Laying, jointing and making proper terminations,etc. all complete.
119	Providing, erecting and commissioning of Power wiring with required size of 150 sq 3.0 core 1.1 KV grade armoured Copper Cables, XLPE/PVC insulated armoured cablefrom MCPto motors at Clear Water Pump House. Laying, jointing and making proper terminations, etc. all complete.
120	Providing, erecting 400 KVA (Oil cooled) Servo Controlled Sutomatic Voltage stabiliser suitable for out put voltage of 415 volt +/- 1%,3 ph, 50 Hz with copper wound transformer (Oil cooled) including change over switch, earthing, T- coil, etc all complete as per indian standard
121	Earthing: Providing, erecting and commissioning of earthing as per IS 3043 with all Equipments & Materials for each motors.
122	Supplying, installation & commissioning ofLightening arrestor for Pump house, fire fighting system, first aid, Rubber matting for WTP.
123	Providing, erecting and commissioning of 5 ton triple spur gear type hand operated Chain Pulley with 6 m lift complete with chain pulley block ISI marked tested for 50% overload including arrangement for longitudinal travel/circular travel and cross travel with wheel, hand chain, etc. complete.
124	Tansformer Installation: Cost of construction of PCC platform/ foundation with DP structure in PSC Pole for above mention transformer with different type of MS channels, M.S. angles, brackets, insulators, AB Switch, three set of horn gap fuse, DO fuse, disc & pin insulator, lightening arrester with earthing, stay sets, nut bolts, fabrication work required for the job, cost of earthing of transformer (Two nos., one no. for neutral and one for body) with all required material, technicians, labours, Grouting, PCC work, fencing, Danger board, testing of transformer oil, fitting, fixing, connecting with HT/LT lines, etc. forpower supply, etc. all complete as per I.E. rules and specification of Jharkhand state electricity board.
125	CLEAR WATER PUMPING MACHINERY & ELECTRICAL WORKS AT SUMP
126	Supply, installation, testing and commissioning of Centrifugal pump sets with allied equipment as under-
127	Providing , erecting and commissioning of Multi stage/ HSC Centrifugal pump (make: Kirloskar / WPIL/ Mather & Platt) as per IS:5120, capable for required discharge and head (mention below), consisting of SS/ bronze impellers, stainless steel pump shaft, etc. with all accessoriescoupled with energy efficient (IE3) TEFC squirrel cage induction motor confirming to IS:12615, having 15% more BHP than that of pump, operating on 1500 rpm, 415V, 3 PH, 50 HZ[make: Kirloskar /ABB/ CGL/ Marathon/ Siemens] all complete withrequired size of sluice valve and non- return valve standard fitting, strainers, reducer, foot valve, pressure gauge, MS delivery & Suction pipe, common header, nuts & bolts, packings, fitting & fixing, labour & technician, etc. all complete job as per site requirement and direction of E/I.(Note:- Contractor will have to check the design of pump & motor and get it approved by the Department)
128	Discharge - 27.14 LPS, Head- 130 M. (1W+1S)
129	Main Power Distribution Panel cum MCP for Sump to be installed at Int. SUMP:- Providing, erecting and commissioning of Floor mounted cubical LT Motor Control Panel board fabricated with MS sheet of suitable guage and size, dust and vermin proof and painted consisting of proper power distribution 4 pole 400A copper busbar, 1 no. incoming feeder of 400A MCCB, 2nos. 250 A MCCB for Pump set ,1no. 250A MCCB outgoing feeder of, 2 nos. 32 A MCB for lighting and utility switch disconnected isolator (TPN), selector switches, Volt-meters, Ampere-meters, indicator lamps etc. all complete with internal wiring, protection units/ relays and capacitor banks of proper KVAR for Power Factor improvement for pump sets and other equipments, etc. all complete as per site requirement, Instruction of E/I. and IE rules.
130	Providing, erecting and commissioning of assembled Fully Automatic Star Delta starter, in a provided cubical panel to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil, over load relay and ON/OFF push buttons, with necessary material and connected to supply, etc complete.
131	Providing, erecting and commissioning of Power wiring with required 240 Sq mm 3.5 core 1.1KV grade armoured Aluminium Cables, XLPE/PVC insulated armoured cablefromTransformer to MCP at Clear Water Pump House. Laying, jointing and making proper terminations,etc. all complete.
132	Providing, erecting and commissioning of Power wiring with required size of 70 sq 3.0 core 1.1 KV grade unarmoured Copper Cables, XLPE/PVC insulated unarmoured cablefrom MCP to motors at Clear Water Pump House(Sump). Laying, jointing and making proper terminations, etc. all complete.
133	Providing, erecting 200 KVA (Oil cooled) Servo Controlled Sutomatic Voltage stabiliser suitable for out put voltage of 415 volt +/- 1%,3 ph, 50 Hz with copper wound transformer (Oil cooled) including change over switch, earthing, T- coil, etc all complete as per indian standard
134	Earthing: Providing, erecting and commissioning of earthing as per IS 3043 with all Equipments & Materials for each motors.
135	Supplying, installation & commissioning of internal and external lighting with all materials, Lightening arrestor for Pump house, fire fighting system, first aid, Rubber matting for WTP.
136	Providing, erecting and commissioning of 3 ton chain pulley hand operated with 6 m lift complete with chain pulley block ISI marked tested for 50% overload including arrangement for longitudinal travel etc. complete.
137	Tansformer Installation: Cost of construction of PCC platform/ foundation with DP structure in PSC Pole for above mention transformer with different type of MS channels, M.S. angles, brackets, insulators, AB Switch, three set of horn gap fuse, DO fuse, disc & pin insulator, lightening arrester with earthing, stay sets, nut bolts, fabrication work required for the job, cost of earthing of transformer (Two nos., one no. for neutral and one for body) with all required material, technicians, labours, Grouting, PCC work, fencing, Danger board, testing of transformer oil, fitting, fixing, connecting with HT/LT lines, etc. forpower supply, etc. all complete as per I.E. rules and specification of Jharkhand state electricity board.
138	Twin Type Staff Quarter - 1 Unit (Please refer to Section 5, Sl. 2.7 of SBD)
139	E/W in Excavation in foundation trenches inordinary soil (Vide classification of soil Item -A) & disposal of excavatd earth obtained to a distance up to 50 M including all lift leveling ramming the foundation trenches removing root of trees scrubs all complete as per approveddesign.
140	Providing, coarse clean sand in filling in foudation trenches /in Plinthincluding ramming & watering in layers not exceeding150 mm thick with all leads lift including cost of all materilas, labour, royalty & taxes all complete as per building specification & direction of E/I
141	Providing designation 75 A one brick flat soiling jointsfilled with local sand including cost of watering taxes royalty all complete as per building specification & direction of E/I
142	Providing P.C.C M-100 in nominal mix of (1:3:6) in foundation with appoved quantity of stonemetal (50 mm 25 mm dia size)graded& clean coarse sand of F.M 2.5 to 3 including screening, shuttering, mixing cementconcrete in mixer & placing in position, vibrating, striking, curing taxes & royalty all complete as per building specification& direction of E/I.
143	Providing designation 75 A brick work in C.M. (1:6) in foundation7 Plinthwith approvedqualityof clean coarse sand of F.M 2 to 2.5 including Providing 10 mm thick mortar joints, Cost of screening, materials, Scaffolding, rakingoutjoints to 15 mm depth curing, taxes & royalty all complete as perbuildingspecification & direction of E/I
144	Providing 50 mm thick damp proof coarse with cement concreteM-150 with nominal mix of (1:2:4) with approved quality of stone chips of 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to3 including screening, shuttering mixing cement concretein mixer with 5% cico or any other approved water proffing compound and placing in position, vibrating, striing, curing, taxes & royalty all completeas per building specification & direction of E/I
145	Providingdesignation 75 A brick workin C.M (1:6) in super structure with approvedqualityof clean coarsesand of F.M. 2 to 2.5 including providing10 mm thick motar joints, cost of screening, materials, scaffolding, raking outjoints to 15 mm depth curing, taxes & royalty all complete as perbuilding specification & direction of E/I.
146	Providing R.C.C M-150 with nominal mix of (1:2:4) in lintel level with approved quality of stonechips 20 mm to 6mm size graded & clean coarse sand of F.M 2.5 to including screening, centring,shuttering andmixing cement concrete in mixer& placing in position vibrating striking curing (butexcluding the cost of reinforcement ) taxes & royalty all complete as per building specification of E/I.
147	Centerring & Shuttering
148	Providing average 63 mm thick R.C.C M -200with nominal mix (1:1.5:3) chajja in shelves with approvedqualityof stone chips20 mm to 6 mm size graded & clean coarse sand of F.M 2.5 to 3 including making drip coursein concrete, screening, centering shuttering & mixing cement concrete in mixer & placing in position vibrating, striking, 6 mm cementplaster (1:4) in celling & sidesof chajja with sand of F.M 1.5, Curing (But excluding the cost of reinforcement) taxes and royalty all complete as per building specification of E/I.
149	Centerring & Shuttering Door & Windows
150	Shelves
151	Providing R.C.C M-200 with nominal mix of (1:1.5:3) in roof slab with approved quality ofstone chips 20 mm to 6 mm size Graded & Clean coarse sand F.M 2.5 to including making drip course in cocrete,screening, concreting, shuttering, centring mixing cement concrete in mixer & placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes & royalty all complete as per building Specification & direction of the E/I.
152	Centering & Shuttering including proping
153	Supplying fitting & fixing good quality, well dressed & well seasoned sal wood work in choukhat in doors, windows, skylights, fan light and C/W celestial windows openings, including wedge over all clamps completeincluding application of two coats of wood preservative of approved quality on the surfacebutting walls & lintels all complete as per building specification & directionofE/I
154	Supplyingfitting and fixing 250 x 20 x 6 mm L-type M.S Clamp properly fish tailed .including making holes and setting the same in 375 x 125 x 75 mm cement concrete block (1:2:4) with cost of all labour and materials and taxesas per building specification and diection of E/I @6for each door & 4 for each window Total Quantity -(2x3x6+2x4x4)=68 nos
155	Supplying all materials, labours and fitting & fixing 38 mm (1.5) thick good quality seasonedsal wood battened shutter ledged & braced in door and windows with oxidized iron fitting such as hingles, sliding door bolts, tower bolts, handles or ings hooks and eye, cleats, sand block as per schedule, taxes & royalty all complete as perbuilding specification & direction of Engineer -in- charge
156	Supplying, fittings & fixing M.S Gril made of 20 x 6 mm M.S flat as perapproved design& drawing properly fabricated with jointscontinous filllet welded and finshed smooth, carriage of grill to worksite hoistingas per the building specification and direction ofE/I (where materials is not supplied by the Deptt.)
157	Providing 25 mm thick pre cast R.C.C M-150 with nominal mix of (1:2:4) in jali with approvedquality to stonechips of 6mm nominal size and clean coarse sand of FM 2.5 to 3 with 1.6 mm thick M.S wire as per approveddesign and drawingand placing the same in position true to plumb and level and properly groutedwith cement mortar (1:3) including cost of curing, Scaffolding and finishing all complete as per building specification and direction E/I
158	Providing and fixing fan hook of 16 mm dia M.S bar 1 meter long bent to reqiredsize and shape placedin position and fixing in R.C.Cslab/beam at the time of casting all complete as per building specification of E/I where material is not supplied by cheet
159	Supplying, fitting and Fixing M.S Grill gate made of 20 x 6 mm M.S or 16 mm M.S raurbar Flat fitted on25 mm x 25 mm x 6mm M.S angle frame of size 60 x 60 x 6 as per approved design including cost of fabrication & drawing, properly fabricated with jointscontinuousfillet welded & finished smooth, providing necessary locking arrangements with Haskell &dummy duly fixed in C.C (1:2:4) blocks of reuired size applying a priming red lead paintsover steel works, taxes , carriage of grill to work site, as per the building specification & direction of E/I (wherematerialsis not supplied by the Dept)
160	Providing 6 mm thick cement plaster (1:4) in cellingwith approved quality of clean coarse sandof F.M1.5 includingscreening, curing with allleads & lifts of water, scaffolding, taxes & royalty all complete as per building specification & direction of E/I
161	Providing 12 mm thick cement plaster (1:6) with approved qualityof clean coarse sand of F.M 1.5 includingscreening Curing with all leads & lifts of water, Scaffolding, taxes 7 royalty all complete as per building specification & direction of E/I.
162	Providing cement 1:3 (12mm ) plaster with cement mortar (1:3) using clean coarse sandfinishing with neat punning a dado 6\" (150 mm) higha side room and out side wall upto plinth level includng screening, curing with all leads & lifts of water, scaffolding, taxes and royaltyall completeas per buildingspecification & direction of E/I
163	Filling in foudation trenches & Plinth in layersnot exceeding 150 mm thick well watered, rammed, fully compacted & finedressed with earth obtained fromexcavation of foundationtrencheswithin a lead of 50 m & lift of 1.5 m all complete as per building specification & direction of E/I. (Mode of measurementcompacted volume)
164	Providing average 150 mm thick dry rammed khoa beaten to 112 mm. (compacted with water) made of well burnt or jhama bricks including ramming properly till compacted thickness is achieved, curing & carriage of water with all leads, making proper slope & blending the top with cement mortar (1:10) all complete as per building specification & direction of E/I.
165	Providing 25 mm thick First class patent stone flooring (1:2:4) with stone chips in two layers ,bottom layer 19 mmthick (1:2:4)with 12 mm to 6 mm size graded stone chips and top layer 6 mm thick (1:2) with 6 mm down stone chips in pannels including cost of curing , finishing the surface smooth by rubbing with carborandum stone taxes & royalty with all completeas per building specification & direction of E/I
166	Providing designation 75 A one brick on edge flooring in C.M (1:4) with top surface flush pointed in CM (1:4) approvedquality of clean coarsesand of F.M 2 to 2.5 including the cost of screening, raking outjointsto 15 mm depth, curing taxes, royalty all complete as per building specification and direction (E/I)
167	White washing three coat over new surface with approved quality of lime including cost of cleaningsurface thoroughly and removing the scales of smoke & ash marks with jhama rubbing, scaffolding washing of floor sand taxes all complete as per building specification and direction of E/I
168	Providing all materials, labours & doing 2 (two) coat colour washing over a coat of white washing over new surface with approved quality of lime & colour over the new surface including the cost of clening surface thoroughly and removing the scales of smoke & ash marks with jhama rubbing, scaffolding washing of floor sand taxes all complete as per building specification and direction of E/I.
169	Providing two coats of painting with readymix paint synthetic enamel paint over a coat of primer of approved shad and make over new wooden surface after cleaning, removing dirt scales, smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification & direction of E/I.
170	Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust, dirt, scales, smokes and grease and cleaningthe surface thouroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I
171	Providing 2(two) coats of Paniting with ready mixed paints of approved shade & make over steel surafce including cleaning the surface thouroughly , scaffolding & taxes all complete as per building specification & direction of E/I
172	Providing 10 mm (TMT) Fe 500 TOR for steel reinforced as per approved design and drawing excluding carriage of torrod to work site including cutting bending and binding with annealed wire with cost of wire with cost of wore removal of rust placing the rods in position all complete as per building specification and direction of E/I
173	Carriage of materials from divisional store or kiln site or quarry site to work site including contract profit, loading, unloading, transportation, etc. all complete .
174	Cement 10KM lead
175	Steel10KM lead
176	Sand 36KM lead
177	Bricks 06KM lead
178	Stone/Stone Chips11 KM lead
179	Water Supply Sanitation Installation (Plumbing work)
180	Supplying and laying GI pipes of approved make in trenches with red lead and yarn with socket and screw joints and cutting pipes in size and threading ends where necessary including carriage of materials up to work site etc. all complete as per specification and direction of E/I.
181	i)25 mm GI. Pipe.
182	ii) 15 mm GI. Pipe.
183	Supplying materials and labours for fixing GI Pipes with red lead paints and yarn with screwed and sockted joints on wall, celling and floor including supplying of wall hooks of pipe clamp, wooden plugs, cutting pipe to size and threading ends where necessary all complete as per specification and direction of E/I.
184	i) 15 mm GI. Pipe
185	Supplying, fitting and fixing of GM ferrule of approved make in DI/CI main including drilling and tapping CI/DI main etc. all complete as per specification and direction of E/I.
186	Supplying and fixing GI fittings of approved make all complete as per direction of E/I.
187	(a) Elbow 15 mm dia
188	(b) Tee plane 15mm dia
189	(c) Nipple 15mm dia.
190	(d) Union Socket 25mm dia
191	(e) Union Socket 15mm dia
192	(f) Brass bib cock15mm dia
193	(g) C.I stop cock 15mm dia
194	(h) C.I. stop cock 25mm dia
195	(i) Reducing Socket 25x15mm
196	(j) Tee 25x25x15mm dia
197	Supplying, fitting and fixing vitreous white glazed earthen were I W C of parry Hindustan or any other I.S.S approved make with 100 mm HCI ‘P’ trap, 15 Liters CI pull and let go flushing cistern of names or otherISS equivalent make complete with all fittings C.I. or C.C brackets, 32 mm, alkathene /PVC telescopic flush pipe about 2 mtrs. long with one brass coupling and clamps, GI chain and pull including supplying and fixing a pair of vitreous white glazed earthen were footrest to be fixed in floor, 15 mm .CI body brass spindle, stop cock of weight not less than 50 grams, 15 mm. PVC connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. (510mm.long with 12.5 Liter low level PVC System).
198	SEPTIC TANKand SOAK PIT
199	Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item - B) and disposal of excavated earth as obtained to a distance up to 50 m including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubsall complete as per approved design, building specification and direction of E/I.
200	Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of E/I.
201	Providing designation 75A one Brick flat soling, joints filled with local sand including cost of watering, tax, royalty all complete as per building specification and direction of E/I.
202	Providing P.C.C M150 with nominal mix of (1:2:4) in foundation with approved stone chips 20mmto 6mm size well graded andclean course sand of FM-2.5to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, Vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.
203	Providing water proof cement plaster (1:3) with clean course sand of F.M- 1.5mm with 5% cico or any other approved water proofing compound including taxes and royalty all complete as per buildingspecification and directions of E/I.
204	(a) 19 mm thick
205	(b) 12 mm thick
206	Providing designation 75A bricks work in C.M. in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints, cost of screening materials racking out joints to 15 mm. depth, curing taxes and royalty all complete as per building specification and direction of E/I.
207	(a) B/Win C.M (1:4)
208	(b) B/W 75-B in (1:6) for Soak pit
209	(c) Brick work in dry masonry for soak pit.
210	Providing pre cast R.C.C.M-150 with nominal mix of (1:2:4) slab of desired sizewith approved quality of stone chipsand clean coarse sand of FM 2.5 to 3 including curing, shuttering, carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement), taxes and royalty etc. all complete as per building specification and direction of E/I.
211	Providing for reinforcement as per approved design and drawing excluding carriage of tor rod to work site including cutting bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per Specification and direction of E/I.
212	10 mm dia
213	Supplying fitting and fixing H.C.I. Pipe/ H.C.I. fitting of Approved make confirming to I.S.S 1729 including supplying nails and bobbins lead andyarn from making lead caulked joints including earth work or providing scaffolding as the case may be all complete as per specification and direction of E/I.
214	(a) 100mm dia H.C.I. Tee.
215	(b) 100mm dia H.C.I. Band
216	(c) 50mm dia H.C.I. Cowel
217	(d) 50mm dia H.C.I. Vent pipe
218	(e) 100mm H.C.I. Pipe
219	Supplying materials and labours and fixing20mm dia M.S bar steps in wall of 0.3 m interval and staggeredin (1:2:4) cement concrete including scaffolding and curing etc. all complete as per specification and direction of E/I.
220	Supplying all materials, labours, tools and tackles and 100mm dia R.C.C hume pipe and laying jointing, testing, earth work including carriage of materials etc. all complete.
221	Supplying 50mm size brick bats and filling in soak pit including carriage and labours etc. all complete as per direction of E/I.
222	Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600x450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600x475mm G.I. Cover With frame (Weight not less than 36 Kg.) along with earth work in excavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I
223	Carriages of materials
224	(a) Brick – 06 KM lead
225	(b) Sand - 36 KM lead
226	(c) Stone chips - 11 KM lead
227	(d) Steel -10 KM lead
228	(d) Cement-10 KM lead
229	Electrical Works
230	Point wiring in PVC conduit with modular type switch wiring for light point /fan point with 1.5sqmm F.R. PVC insulated copper conductor single core cable in surface/ recessed PVC conduit with modular switch modular plate, suitable G.I. box and the point with sqmm FR PVC insulated copper conductor single core cable etc as required
231	Wiring for twin control light point with 1.5 sqmm F.R. PVC insulated copper conductor single core cable in surface/recessed PVC conduit with two way modular switch modular plate, suitable G.I. box and the point with sqmm FR PVC insulated copper conductor single core cable etc as required
232	Wiring for light /power plug point with 2 x 4 sqmm F.R.PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with one no 4 sqmmFR PVC insulated copper conductor single core cable for loop earthing etc as required.
233	Coppersub main wiring in PVC conduit Wiring for sub main wiring withPVC insulated copper conductor single corein surface/recessed PVC conduitas required.
234	2 x 1.5 sqmm + 1 x 1.5 sqmm earth wiring
235	2 x 2.5 sqmm + 1 x 2.5 sqmm earth wiring
236	Supplying and fixing following way three pole and neutral sheet MCB distribution board 415 volts on surface/ recessed complete with tinned copper bush bars, neutral link, earth bar, din bar, detachable gland plate inter connection phosphatised and power painted including earthing etc as required (but with out mcb / rccb / Isolator) (4+12) double door horizontal type.
237	Supplying and fixing 5 amp to 32 amp, rating 240 volts, B series miniature circuit breaker of single poles in existing MCB DB complete with connecting, testing, and commissioning etc as required
238	Earthing with G.I. earth pipe 4.5 M long 40mm diaincluding accessories and providing masonry enclosure withcopperplate having locking arrangement and watering pipe etc with charcoal, salt all complete as per electrical rule
239	Supplying ,fitting and fixing following sizes of PVC conduct along with accessories in surface / races including cutting the wall and making good the same in case of recessed conduit as required
240	PVC con 20 mm PVC pipe
241	PVC con 25 mm PVC pipe
242	Installation commissioning and testing Ceiling Fan
243	Carriage of ceiling fan and regulator
244	Supplying, fitting and fixing 5 amp ceiling rose on the existing junction
245	Supplying, fitting and fixing breas batten/ angle holder including connection etc.
246	Supplying, fitting and fixing G.I. box with modular plate and cover in front of surface or in recess including providing and fixing 3pin 5/6 amp modular type switch, connection, painting etc as required.
247	Supplying, fitting and fixing G.I. box with modular plate and cover in front of surface or in recess including providing and fixing 6pin 5/6 amp and 15/16 amp socket outlet and 15/16 amp modulartype switch, connection, painting etc as required.
248	Supplying and drawing co-axial T.V. cable RG-06 grade 0.7 nn solid copper conductor PE insulated seilded with fine tinned cover braid and protected with PVC sheath in the existing surface / recessed steel/ PVC conduit as required.
249	Supplying and fixing modular switch / socket on the existing modular plate and switch box including connection but excluding modular plate etc,as required. TV antenna socket out put
250	Supplying, fitting and fixingmodular base andcover plate on existing modular metal boxes etcas required.
251	Cost ofEarthing with G.I. earth pipe 4.5 M long 40mm diaG.I.Pipe 600 mm x 600 mm x 6 mm thick copper earth plate and 8 SWG copper wire including cost of making 1.2 x 1.2 x 3m deep pit and filling with charcoal, salt all complete as per electrical rule
252	Boundry Wall for WTP & 5 Nos. ESR. (902.00 M Long)
253	Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authority Construction of Compound wall. etc. all complete job. (Please refer to Section 5,Sl. 2.9 of SBD)
254	Earth work in excavation in foundation trenches in hard soil (Vide classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
255	Providing coarse clean sand in filling in fundation trenches or in plinth including ramming and watering in layers not exceeding 15mm thick with all leads and lifts includiing cost of all materials, labour, royality and taxes all complete as per building specification and direction of E/I.
256	Providing designation of 75A one brick flat soling, joints filled with local sand including cost of watering, taxes royalty all complete as per building specification and direction of E/I.
257	Providing P.C.C M - 150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips (20 mm to 6 mm size)clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.
258	Providing R.C.C M - 200 with nominal mix of (1:1.5:3) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.
259	Centering & Shuttering
260	Providing RCC M-200 with nominal mix of (1:1.5:3) in stiffeners with approved quality of stone chips 20mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I.
261	Centering & Shuttering
262	Providing RCC M-200 with nominal mix of (1:1.5:3) in band at plinth level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I. Top of Wall
263	Providing RCC M-200 with nominal mix of (1:1.5:3) in band at lintel level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I. Top of Wall
264	Centering & Shuttering
265	Providing designation 75 A brick work in CM (1:6) in super structure with approved quality of clean coarse sand of FM 2 to 2.5 including, providing 10mm thick mortar joints cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.
266	Providing 12mm thick cement plaster (1:6) with clean coarse sand of FM 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direction of E/I.
267	Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per buildingspecification & direction of E/I. Qnty. Same as Item no.13
268	Providing Tor steel reinforcement of 10 mm, 12 mm & 16 mm dia Bars as per approved design and drawing excluding carriage of M.S bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, Placing the rods in position all complete as per building specification and direction of E/I.
269	Filling in foundation trenches and plinth in layers not exceeding dressed with earth obtained from excavation of foundation trenches with a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I.
270	Carriage of materials from divisional store or kiln site or quarry site to work site including contractor\"s profit, loading, unloading, transportation etc. all complete .
271	Cement10KM lead
272	Steel 10KM lead
273	Sand 36KM lead
274	Stone/Stone Chips11KM lead
275	Bricks 06KM lead
276	Gate - 05 nos.
277	Earth work in excavation in foundation trenches in hard soil (Vide classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
278	Providing coarse clean sand in filling in fundation trenches or in plinth including ramming and watering in layers not exceeding 15mm thick with all leads and lifts includiing cost of all materials, labour, royality and taxes all complete as per building specification and direction of E/I.
279	Providing designation of 75 A one brick flat soling, joints filled with local sand including cost of watering, taxes royalty all complete as per building specification and direction of E/I.
280	Providing P.C.C. M - 150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips (20 mm to 6 mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.
281	Providing R.C.C M - 200 with nominal mix of (1:1.5:3) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.
282	Centering & Shuttering
283	Providing RCC M-200 with nominal mix of (1:1.5:3) in column with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I.
284	Centering & Shuttering
285	Providing RCC M-200 with nominal mix of (1:1.5:3) in band at plinth level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I.Top of Wall
286	Centering & Shuttering
287	Providing Tor steel reinforcement of 10 mm, 12 mm & 16 mm dia Bars as per approved design and drawing excluding carriage of M.S bars to work site, cutting ,bending and binding with annealed wire with cost of wire, removal of rust, Placing the rods in position all complete as per building specification and direction of E/I.
288	Filling in foundation trenches and plinth in layers not exceeding dressed with earth obtained from excavation of foundation trenches with a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I.
289	Supplying fitting & Fixing M.S. grill gate with M.S. grills made 20x6mm M.S. flat or 16mm M.S. square bars fitted 25 x 25 x 6 mm M.S. angle frame of size 60x60x6 mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.
290	Providing two coat of painting with ready mixed paint of approved shade and make over steel surface
291	Carriage of materials from divisional store or kiln site or quarry site to work site including contractor\"s profit, loading, unloading, transportation etc. all complete .
292	Cement10KM lead
293	Steel10KM lead
294	Sand36KM lead
295	Stone/Stone Chips11KM lead
296	Bricks06KM lead
297	Approch Road , 280 M Length
298	Construction of embankment with approved meterial obtained from borrow pits with a lift 1.5 M transporting to site spreading,grading to required slope and compacting to meet requirement of to tables 300.1 and 300.2 with a lead upto 1000 M as per technical specification 301.5.
299	(A) By mix in place method construction of granual sub base by providing well graded material, spreading in layer with mortar grade on prepared surface, mixing by mix in place method with rotavater at OMC, and compecting with smooth wheel roller to achiver the desired dencity,complete as per technical specification clouse 401,
300	Construction of un-reinforced dowel joints at expaction and construction joint only plain cement concrete pavement thickness as per design over a with shovels rakes compacted using prepared sub base with 43 grade cement or any other type as per clouse 1501.2.2 M-30 (grade) coarse not exceeding 25 mm mixed in concrete mixer of not less than 0.2 cum capacity and appropenate weigth bacher using approved mixed design laid in approved fixed side fromwork (steel channal laying and fixing of 125 micron thick polythene film wedges steel plates including leveling the fromwork as per drawing), spreading the concrete with shovels rankes compacted using needle seed and plate vibrators and finished in contaction and empanction contraction jointing appling debonding strips primer sealant dowel bars near approches to bridge/culvert and contraction joints admixtures as approved curring of concrete slabs for 14 days using curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clouse 1501.
301	Providing and laying boulder apron for bed protection with stone boulders of minimum size and weigth as per table-1300.1 no frament weighing less than 25 kg laid dry complete as per drawing and technical specification clouse 1301.
302	Carriage of materials from divisional store or kiln site or quarry site to work site including contract profit, loading, unloading, transportation, etc. all complete.
303	Cement10KM lead
304	Sand36KM lead
305	Stone/Stone Chips11KM lead
306	Boulders11KM lead
307	N.H. Crossing
308	Manufacturing providing and supplying spiraly welded / ERW / SAW / Fabricated M.S. Pipes (Commercial Quantity) including procurements of Plates. Gas cutting to required size rolling tack welding assembling in suitable lenghths to form pipes, welding on automatic welding machine and forming \"v\" edge on both ends of pipe including all taxes (Central and Local), railway freight, Insurance unloading form railway wagon, loading into truck transport to stores / site,unloading,stackingetc.complete as per IS - 3589 and IS - 5504 as applicable as per specifications (No negative tolerance in thickness is permissible).
309	A) For 200 & 150 mm dia Rising Main DI pipe - 350 mm dia10 mm thick. (For Casing)(40 M Each)
310	Pushing of M.S. pipe of following dia for road crossing and Railway crossing by push through method in all types of strata by using hydraulic jack and drilling machine of required diameter, elow 3.0 m depth including lowering, laying, jointing of M.S. casing pipe including cost of labour fuels and material, required welding machinary, tripod, chain pulley block, vrane, blower etc. transportation and dewatering etc. complete as diredeted by Engineer-in-charge but excluding cost of M.S. pipe.
311	Above 300 mm to450 mm dia
312	Providing and applying primer first coat ofinferol 49 W emaline 05/ 58 pipe cost or any other equivelent approved pain to the internal surface of pipe line at sight.
313	A) For 350 mm 120 m x 3.142 x 0.35 x 1 surfaces
314	First Coat
315	Second Coat
316	Pump House at Intermediate Sump (5.5x3x4)
317	E/W in excavation in foundation trenches in ordinary soil (vide classification of soil item - B) and disposal of excavated earth obtained to a distance upto 50 M including all lift leveling,ramming the foundation trenches removing roots of trees, shurbs all complete as per approved design, building specification and direction of E/I.
318	Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150 mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume).
319	Providing designation 75 A one brick flat soiling jointsfilled with local sand including cost of watering taxes royalty all complete as per building specification & direction of E/I
320	Providing P.C.C. M- 150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing, taxes & royalty all complete as per building specification &directionof Engineer-in-charge.
321	ProvidingR.C.C.M- 200with nominal mix of (1:1.5:3) in foundation and plinth with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes & royalty all complete as per building specification &directionof Engineer-in-charge.
322	Centerring & Shuttering Base of column
323	Providing R.C.C. M-150 with nominal mix of (1:2:4) in beams of all types with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse of F.M. 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement), taxes and royalty all complete as per building specification and direction of E/I.
324	Centerring & Shuttering Column
325	Providing R.C.C. M-200 in band at plinth level with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement), taxes and royalty all complete as per building specification and direction of E/I.
326	Centerring & Shuttering
327	ProvidingR.C.C.M- 200with nominal mix of (1:1.5:3) in lintel with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes & royalty all complete as per building specification &directionof Engineer-in-charge.
328	Centerring & Shuttering
329	ProvidingR.C.C.M- 200with nominal mix of (1:1.5:3) in beam with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes & royalty all complete as per building specification &directionof Engineer-in-charge.
330	Centerring & Shuttering
331	Providing RCC M-200 with nominal mix of (1:1.5:3) in roof slab with approved quality of stones chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (But excluding cost of reinforcement, taxes and royalty all complete as per building specification and direction of E/I.
332	Centerring & Shuttering
333	Providing av. 63 mm thick R.C.C. M-200 with nominal mix of (1:1.5:3) chhajja with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including making drip course in concrete, screening, centering, shuttering and mixing cement concrete in mixer and placing in position, vibrating, striking, 6 mm cement plaster (1:4) in ceiling and sides of chhajja with sand of F.M. 1.5, curing (but excluding the cost of reinforcement) taxes, and royalty all complete as per building specification & direction of E/I.
334	Centerring & Shuttering
335	Providing designation 75 A Brick work in C.M. (1:6) in foundation and plinth withapproved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royality all complete as per building specification and direction of E/I.
336	Providing 50 mm thick damp proof coarse with cement concrete M-200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering and mixing cement concrete in mixer with 5% cico or any other approved water proof-ing compound and placing in position, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.
337	Providing designation 75 A Brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening, materials, scaffolding, raking out joints 15 mm depth, curing, taxes and royalty all compelete as per building specification and direction of E/I.
338	Supply and fixing rolling shutters of approved make, made of required size M.S Laths, interlocked togather through there entire length and jointed togather at the end by end locks, mouted on specially designed piped soft with brackets, side guides and arrangment for inside and outside locking with push and pull operation complete, in cluding the cost of providing and fixing neccesary 27.5 cm long wire springs manufatured from high tensilr steel wire of adequate strenth confirming to I.S 4454 par-I and M.S top cover of requierd thickness of rolling shutters. Excluding GST & Cess. 80*1.25mm m.s Laths with 1.25 mm thick top cover.
339	Providing and fixing Ball Bearig for rolling shutters
340	Supplying, fitting and fixing fully glazed steel door, windows or ventilation of standard rolled ‘Z; and mullion steel section and size as per is-1038 joints met and weeded with 100 x 16 x 3 mm MS. Lugs fixed in cement concrete (1:2:4) block 15 x 10 x 10 cm, size including cost of oxidized iron fittings, with hinges, handle per steps, catch springs, 3mm thick plain glass panes with aluminum beads and inner, farm fixed with lugs with 20 mm long 63 mm GI counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all story’s an taxes all complete as per building specification and direction of E/I.
341	Supplying MS Grill in window made of 20 X 6 mm MS flate or 16 mmMS Squre Bars fitel on 25 X 25 X6 mm MS angil frame etc all complite as per direction of E/I.2X0.90 X1.20X40Kg
342	Providing 6 mm cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.
343	Providing 12 mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.
344	Providing 12 mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 with floating coat of neat cement in skirting inclding rounding of junctions with floor, curing, taxes and royalty all complete as per building specification and direction of E/I.
345	Earth work in filling in foundation trenches and plinth in layers not exceeding 150 mm thick, well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direcrtion of E/I. (Earth obtainted from excavation of foundation)
346	Providing 50 mm thick cement concrete flooring (1:2:4) with 20 mm to 6 mm size graded stone chips finished with floating coat of neat cement in panels, including cost of curing, finishing the surface smooth by rubbing with carborundum stone, taxes and royalty all complete as per building specification and direction of E/I.
347	Providing 25 mm thik first class patent strore flooring (1:2:4) with stone chipes in two layers, Bottom layer 19 mm thik (1:2:4) with 12 mm to 6mm size graded stone chips and top layer 6mm thick (1:2) with 6 mm down stone chips, in panels including cost of Curing finicing the surface smooth by rubbing etc. all complete as per Building Specification.
348	Provide two coat of snowcem of approved shade & make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding, curing & taxes all complete as per building specification & direction of E/I.
349	Providing primer coat of red lead paint of approved make over new steel surface including prepairing the surface after cleaning, removing rust, dirt scales, smokes, grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification & direction of E/I. (Mode of measurment-Area shall be multiplied by the coefficient as indicated in building specification.)
350	Providing two coats of synthetic enamel paint of approved shade and make over steel surface throughly,scaffolding and taxes all papering including cost of scaffolding and taxes all complete as per building specification & direction of E/I.
351	Providing TMT steel reinforcement of 8 mmdia. rods to 16 mm dia (Only valid for SAIL & TATA STEEL)as per approved design and drawing excluding carriage of MS rods (Straight or in coil)to work site cutting, bending, and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification & direction of E/I.
352	Providing R.S. joist 250 x 125 mm size fitting and fixing in position including cutting to required in shape and size, its carriage applying a primer coat of red lead paint etc. all complete job as per building specification & direction of E/I.
353	Carriage of materials from divisional store or kiln site or quarry site to work site including contract profit, loading, unloading, transportation, etc. all complete .
354	Cement 10KM lead
355	Steel10KM lead
356	Sand 36KM lead
357	Bricks 06KM lead
358	Stone/Stone Chips11 KM lead
359	Raw Water Rising main.
360	Providing and Supplying ISI mark Confirming to IS-8329/ 2000 centrifugally cast (spun) DI pipe for water works with socket and spigot ends in standard working lengths of 4.5, 5.5 & 6 m for classification K-9 suitable for push on joint (Rubber gasket D Jointing) with cement mortar lining inside the pipes with outside zinc and bituminous coating (including cost of one gasket for each pipe)Note: - Rates are F.O.R. Jharkhand but excluding of GST.
361	DI K-9, Dia 300 mm
362	Supplying labours, tools and tackles for testing of laid CI pressure pipe upto 60m head of water all complete as per specification and direction of E/I. (Water to be supplied free of cost departmently)
363	DI K-9, Dia 300 mm.
364	Providing and supplying ISI standard DI specials & fittings with sealing rubber gasket of SBR, complete with cast iron follower gland and MS nut bolts coated or otherwise protected from rusting and suitable for DI Pipes complete as per IS - 9523 Class K-12.Note: - Rates are F.O.R. Jharkhand but excluding of GST.
365	Supplying double flanged sluice valve confirming for IS 2906/14846 including warn gear arrange-ments as per test pressure stainless steel splindle / caps etc. complete. (Sluice and scour valve)
366	DI K-9, Dia 300 mm
367	Providingandsupplyingair valves as per IS-14854 - 2000 andMJP\"s standard specifications of approved make and quality of following diameters includingall taxes (central andlocal),railway freight, inspection charges, unloading from railway wagons, loadingin to truck, transportationtransportation upto departmentalstores / site unloadingandstackingetc. complete.(Single ball - PN - 1.6)
368	40 mm dia Air valve
369	Earthwork in excavation (as per I.S. 3114/1965 for laying of different type and sizes of pipe so as to give one meter avarage cover over the socket of pipes with disposal of excavated with in initial lead and lift as per specification and direction of engineer-in charge.
370	Excavation in soil item-B
371	Earthwork in excavation of cut-off trenches by the hydraulic excavator as per designed section in soft rock (Where blasting is not needed) (vide type of soil item -C) with disposal of soil beyond 1/2 km from centre of trench but upto 1 km with all lifts by tipper including construction and maintenance of haul road all complete as per specification & direction of E/I.
372	Supplying labours, tools and tackles, lubricant etc. for laying and jointing C.I. S/S tyton pipes (class LA) trenches supplying rubber gasket (Rubber gasket confirming to I.S.S.-5382-1969) and making gasket joint including providing night guard, barrier and red light to safe guard againstaccident, all complete (Pipe to be supplied departmentally free of cost and laying of pipes is to be done as per I.S.S. 3114-1985) as per design, specification and direction of E/I.
373	DI K-9, Dia 300 mm
374	Lowering & laying and fixing in proper alignment and position all types of CI air valve as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all materia and giving satisfactory hydraulic testing etc. complete. (for all class of valves)(Single ball - PN - 1.6)
375	40 mm dia Air valve
376	Supplying labour and tools for fixing C.I. sluice valve in trenches with pair of C.I. Tail piece including making laed caulked joints and flanged joint as per I.S.S. specification including supplying all jointing material (pig lead confirming to I.S.S 782-1978, yarn confirming to I.S.S. 6587-1972 and nuts and bolt confirming to I.S.S. 1364-1983) including drilling holes in flanges if required as per specification and direction of E/I.
377	DI K-9, Dia 300 mm
378	Earthwork inbackfilling the trenchesafter laying differenttypesandsizesof pipes withearthremoved duringexcavationwithininitial leadandliftasperspecification and directionof Engineer-in-Charge (for classificationof Soil itemA & B).
379	Supplying all materials, labours, tools and equipment and constructing brick masonry chamber of 1.50 M.x 1.20 M. x 1.80 M. inner size having 25cm. thick 75 A brick masonry wall in C.M. (1:6), over 150 mm. P.C.C. M- 150, laid over one brick flat soling on 100mm. local sand filling, including 12 mm. thick cement plaster with punning of inner surface and exposed surface of B/W in C.M. (1:6) and R.C.C. M- 150 cover slab 150 mm. thick with 20 mm. to 6 mm. gradedstone chips, and clean coarse sand of F.M. 2.5 to 3 including providing CI surface box and screening shuttering, mixing, placing, striking, curing, taxes and royalty all complete as per approved design, drawing & specification and direction of E/I.
380	Supplying all materials, labours, tools and equipment and constructing brick masonry chamber of 1.20 M.x 0.90 M. x 1.50 M. inner size having 25cm. thick 75 A brick masonry wall in C.M. (1:6), over 150 mm. P.C.C. M- 150, laid over one brick flat soling on 100mm. local sand filling, including 12 mm. thick cement plaster with punning of inner surface and exposed surface of B/W in C.M. (1:6) and R.C.C. M- 150 cover slab 150 mm. thick with 20 mm. to 6 mm. gradedstone chips, and clean coarse sand of F.M. 2.5 to 3 including providing CI surface box and screening shuttering, mixing, placing, striking, curing, taxes and royalty all complete as per approved design, drawing & specification and direction of E/I. (upto 250 mm dia)
381	Providing P.C.C. M-150 with nominal mix of (1:3:6) in foundation with approved qualitystone metal(20 mm to 6 mm Size) clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of Engineer -in charge
382	A) Thrust Block
383	Above 300 mm & upto 400 mm dia.
384	ClearWater Rising main.
385	Providing and Supplying ISI mark Confirming to IS-8329/2000 centrifugally cast (spun) DI pipe for water works with socket and spigot ends in standard working lengths of 4.5,5.5 & 6 m for classification K-9 suitable for push on joint (Rubber gasket D Jointing) with cement mortar lining inside the pipes with outside zinc and bituminous coating (including cost of one gasket for each pipe)Note: - Rates are F.O.R. Jharkhand but excluding of GST.
386	DI K-9, Dia 150 mm.
387	DI K-9, Dia 200 mm.
388	DI K-9, Dia 250 mm.
389	DI K-9, Dia 300 mm.
390	Supplying labours, tools and tackles for testing of laid CI pressure pipe upto 60m head of water all complete as per specification and direction of E/I. (Water to be supplied free of cost departmently)
391	DI K-9, Dia 150 mm.
392	DI K-9, Dia 200 mm.
393	DI K-9, Dia 250 mm.
394	DI K-9, Dia 300 mm.
395	Providing and supplying ISI standard DI specials & fittings with sealing rubber gasket of SBR, complete with cast iron follower gland and MS nut bolts coated or otherwise protected from rusting and suitable for DI Pipes complete as per IS - 9523 Class K-12.Note: - Rates are F.O.R. Jharkhand but excluding of GST.
396	Supplying double flanged sluice valve confirming for IS 2906/14846 including warn gear arrange-ments as per test pressure stainless steel splindle / caps etc. complete. (Sluice and scour valve)
397	Sluice valve
398	DI K-9, Dia 150 mm.
399	DI K-9, Dia 200 mm.
400	DI K-9, Dia 250 mm.
401	DI K-9, Dia 300 mm.
402	Scour valve
403	DI K-9, Dia 150 mm.
404	Providingandsupplyingair valves as per IS-10845 - 2000 andMJP\"s standard specifications of approved make and quality of following diameters includingall taxes (central andlocal), railway freight, inspection charges, unloading from railway wagons, loadingin to truck, transportationtransportation upto departmentalstores / site unloadingandstackingetc. complete.(Air Valve- PN - 1.6)
405	25 mm Dia.
406	32 mm Dia.
407	Earthwork in excavation (as per I.S. 3114/1965 for laying of different type and sizes of pipe so as to give one meter avarage cover over the socket of pipes with disposal of excavated with in initial lead and lift as per specification and direction of engineer-in charge.
408	Excavation in soil item-B
409	Earth Work in excavation of foundation trenches as per design section in ordinary or soft rock (videclassification of soilitem-C) anddisposalof excavated materials so obtained (10 M away fromthe edge ofthe trencheswith initial lead of150M andinitial liftof1.5m asper specification anddirection ofE/I. (in ordinaryor soft rock where blasting is not required)
410	Excavation in soil item-C
411	Supplying labours, tools and tackles, lubricant etc. for laying and jointing C.I. S/S tyton pipes (class LA) trenches supplying rubber gasket (Rubber gasket confirming to I.S.S.-5382-1969) and making gasket joint including providing night guard, barrier and red light to safe guard againstaccident, all complete (Pipe to be supplied departmentally free of cost and laying of pipes is to be done as per I.S.S. 3114-1985) as per design, specification and direction of E/I.
412	DI K-9, Dia 150 mm.
413	DI K-9, Dia 200 mm.
414	DI K-9, Dia 250 mm.
415	DI K-9, Dia 300 mm.
416	Lowering & laying and fixing in proper alignment and position all types of CI air valve as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all materia and giving satisfactory hydraulic testing etc. complete. (for all class of valves)
417	25 mm Dia.
418	32 mm Dia.
419	Supplying labour and tools for fixing C.I. sluice valve in trenches with pair of C.I. Tail piece including making laed caulked joints and flanged joint as per I.S.S. specification including supplying all jointing material (pig lead confirming to I.S.S 782-1978, yarn confirming to I.S.S. 6587-1972 and nuts and bolt confirming to I.S.S. 1364-1983) including drilling holes in flanges if required as per specification and direction of E/I.
420	Sluice valve
421	DI K-9, Dia 150 mm.
422	DI K-9, Dia 200 mm.
423	DI K-9, Dia 250 mm.
424	DI K-9, Dia 300 mm.
425	Scour valve
426	DI K-9, Dia 150 mm.
427	Earthwork inbackfilling the trenchesafter laying differenttypesandsizesof pipes withearthremoved duringexcavationwithininitial leadandliftasperspecification and directionof Engineer-in-Charge (for classificationof Soil itemA & B).
428	Supplying all materials, labours, tools and equipment and constructing brick masonry chamber of 1.50 M.x 1.20 M. x 1.80 M. inner size having 25 cm. thick 75A brick masonry wall in C.M. (1:6), over 150 mm. P.C.C. M- 150, laid over one brick flat soling on 100mm. local sand filling, including 12 mm. thick cement plaster with punning of inner surface and exposed surface of B/W in C.M. (1:6) and R.C.C. M- 150 cover slab 150mm. thick with 20mm. to 6mm. gradedstone chips, and clean coarse sand of F.M. 2.5 to 3 including providing CI surface box and screening shuttering, mixing, placing, striking, curing, taxes and royalty all complete as per approved design, drawing & specification and direction of E/I.
429	Supplying all materials, labours, tools and equipment and constructing brick masonry chamber of 1.20 M.x 0.90 M. x 1.50 M. inner size having 25 cm. thick 75A brick masonry wall in C.M. (1:6), over 150 mm. P.C.C. M- 150, laid over one brick flat soling on 100mm. local sand filling, including 12 mm. thick cement plaster with punning of inner surface and exposed surface of B/W in C.M. (1:6) and R.C.C. M- 150 cover slab 150mm. thick with 20mm. to 6mm. gradedstone chips, and clean coarse sand of F.M. 2.5 to 3 including providing CI surface box and screening shuttering, mixing, placing, striking, curing, taxes and royalty all complete as per approved design, drawing & specification and direction of E/I.
430	Providing P.C.C. M-150 with nominal mix of (1:3:6) in foundation with approved qualitystone metal(20 mm to 6 mm Size) clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of Engineer -in charge
431	A) Thrust Block
432	For 300 mm dia.
433	For 150 mm dia.
434	For 200 mm dia.
435	For 250 mm dia.
436	Providing, installing and giving satisfactory field testing of bulk water meter, horizontal inferential multijet type with magnetic device and dry dial suitable for ambient 50 C temperature duly sealed against tampering complete with flanges at both ends and conforming to class B as per ISO 4064 along with manufacturer\"s test certificate and guarantee certificate including cost of all materials and labour etc with OIML. MID certificates for Abroad meter and FCRI for India including 36 month guarantee etc all complete.
437	(i) 300 mm dia
438	DISTRIBUTION MAIN
439	Earthwork in excavation (as per I.S. 3114/1965 for laying of different type and sizes of pipe so as to give one meter avarage cover over the socket of pipe with disposal of excavated with in initial lead and lift as per specification and direction of engineer-in charge.
440	Excavation in Soil item-B
441	Earth Work in excavation of foundation trenches as perdesign section in ordinary soft rock (Vide classification of soil item-C) and disposal of excavated materials so obtained (50N away from the edge of the trenches) with initial lead of 150 M and initiallift of 1.5 m as per specification and direction ofE/I in ordinary of soft rock (where blasting is not reqired) Balance 30% of total Earthwork of taken classification soil item -C.
442	Excavation in Soil item-C
443	Cutting the road as well as restoring the same as per specifications and as directed by Engineer incharge
444	Pucca Road (Except black top only taken out material to be used)40%
445	Waterbound Macadam road(taken out material will be used) for cutting as per requirement 30% of the restoring work
446	Dismantaling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15 meter lead and disposal of unservisible materials with all leads complete as per direction of E/I
447	Providing PCC M-150 in nominal mix of (1:2:4) in foundation with approved quality of store chips 20 mm-6 mm size graded and clean coarsed sand of FM 2.5 to 3.0 including screeing shuttering mixing cement concrete in mixer and placing in position vibrating striking curing taxes and royalty alll complete as per building specification and directio of E/I.
448	Earthwork in backfilling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-charge.
449	Providing and Supplying ISI mark Confirming to IS-8329/2000 centrifugally cast (spun) DI pipe for water works with socket and spigot ends in standard working lengths of 4.5,5.5 & 6 m for classification K-7 suitable for push on joint (Rubber gasket D Jointing) with cement mortar lining inside the pipes with outside zinc and bituminous coating (including cost of one gasket for each pipe)Note: - Rates are F.O.R. Jharkhand but excluding of GST.
450	100 mm dia. DI K-7
451	150 mm dia. DI K-7
452	200 mm dia. DI K-7
453	250 mm dia. DI K-7
454	300 mm dia. DI K-7
455	63 mm dia. (HDPE PE-100, PN-10)
456	75 mm dia. (HDPE PE-100, PN-10)
457	90 mm dia. (HDPE PE-100, PN-10)
458	110 mm dia. (HDPE PE-100, PN-10)
459	125 mm dia. (HDPE PE-100, PN-10)
460	Providing and supplying ISI standard DI specials & fittings with sealing rubber gasket of SBR, complete with cast iron follower gland and MS nut bolts coated or otherwise protected from rusting and suitable for DI Pipes complete as per IS - 9523 Class K-12.Note: - Rates are F.O.R. Jharkhand but excluding of GST.
461	Supplying labours, tools and tackles for testing of laid CI or U.P.V.C. OR H.D.P.E. OR A.C. pressure pipe upto 60m head of water all complete as per specification and direction of E/I. (Water to be supplied free of cost departmently)
462	100 mm dia. DI K-7
463	150 mm dia. DI K-7
464	200 mm dia. DI K-7
465	250 mm dia. DI K-7
466	300 mm dia. DI K-7
467	63 mm dia. (HDPE PE-100, PN-10)
468	75 mm dia. (HDPE PE-100, PN-10)
469	90 mm dia. (HDPE PE-100, PN-10)
470	110 mm dia. (HDPE PE-100, PN-10)
471	125 mm dia. (HDPE PE-100, PN-10)
472	Supplying labours, tools and tackles, lubricant etc. for laying and jointing C.I.S/S tyton pipes (class LA)/D.I. trenches without rubber gasket (Rubber gasket making gasket joint including providing night guard, barrier and red light to safe guard againstaccident, all complete (Pipe to be supplied departmentally free of cost and laying of pipes is to be done as per I.S.S. 3114-1985) as per design, specification and direction of E/I.
473	100 mm dia. DI K-7
474	150 mm dia. DI K-7
475	200 mm dia. DI K-7
476	250 mm dia. DI K-7
477	300 mm dia. DI K-7
478	Supplying labours, tools for laying and jointing HDPE pipes trenches and making butt welded joint, supplying hitting mirror, jack etc.and providing night guard, barrierand red light to safe guard against accident all complete.
479	63 mm dia. (HDPE PE-100, PN-10)
480	75 mm dia. (HDPE PE-100, PN-10)
481	90 mm dia. (HDPE PE-100, PN-10)
482	110 mm dia. (HDPE PE-100, PN-10)
483	125 mm dia. (HDPE PE-100, PN-10)
484	Cutting and champhering of pipes of following diameters including cost of all materials and labour involved,etc. complete as directed by Engineer-in-charge (for all class of pipes)
485	100 mm dia. DI K-7
486	150 mm dia. DI K-7
487	200 mm dia. DI K-7
488	250 mm dia. DI K-7
489	300 mm dia. DI K-7
490	Labour Charge for one cutting of HDPE/UPVC/AC Pressure pipe & specials including supplying, necessary tools and plants, chipping or filling the surface finish as per specification and direction of E/I.
491	63 mm dia. (HDPE PE-100, PN-10)
492	75 mm dia. (HDPE PE-100, PN-10)
493	90 mm dia. (HDPE PE-100, PN-10)
494	110 mm dia. (HDPE PE-100, PN-10)
495	125 mm dia. (HDPE PE-100, PN-10)
496	Providing double flange sluice valve confirming for IS-2906/14846 including worn gear arrengements as per test pressure stainless steel spindle, caps including all taxes transportation complete
497	Sluice Valve
498	100 mm dia.
499	150 mm dia.
500	200 mm dia.

Also Visit

Tenders

Jharkhand Tenders

Distribution and Conditioning Tenders

Pumps Tenders

Centrifugal Pump Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Const. Of Rcc Intake Well Cum Pump House Weir Rcc Gangway Wtp Rcc Esr Rcc Gsr Staff Quarter Compound Wall Nh Crossing Approach Road Pipeline House Connection Etc All Complete Job For Raidih Block Rural Water Supply Scheme., Gumla-Jharkhand

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Const. Of Rcc Intake Well Cum Pump House Weir Rcc Gangway Wtp Rcc Esr Rcc Gsr Staff Quarter Compound Wall Nh Crossing Approach Road Pipeline House Connection Etc All Complete Job For Raidih Block Rural Water Supply Scheme., Gumla-Jharkhand

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us