|
| 1 | Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. B.C.D. S.O.R. Item No. 5.10.4 |
| 2 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.B.C.D. S.O.R. Item No. 5.10.7 |
| 3 | Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. B.C.D. S.O.R. Item No. 5.10.1 |
| 4 | Providiag designation 75B brick work in Cement Mortar (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l.B.C.D. S.O.R. Item No. 5.2.14 |
| 5 | Reinforcedcementconcreteworkinbeams,suspendedfloors,roofshaving slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size).B.C.D. S.O.R. Item No. 5.3.11 |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts.B.C.D. S.O.R. Item No. 5.3.17.6 |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.B.C.D. S.O.R. Item No. 5.3.17.5 |
| 8 | Providing 12mm water proof cement plaster (1:3) with clean coarse sand of F.M 1.5 with 5% cico or any other approved water proofing compound including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.7.14 |
| 9 | Providing and fixing fan hook of 16mm dia TMT M.S. bar 1 meter long bent to required size and shape placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.5.13 |
| 10 | Supplying, Fitting and fixing M.S grill made of 20 x 6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, hoisting carriage of grill to work site hoisting as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.5.12 |
| 11 | Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.5.14 |
| 12 | Supplying, fitting and fixing good quality, well dressed and well seasoned local wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.4.3 |
| 13 | Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windowswith black board core blended with high qualityphenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.4.38 |
| 14 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved mak+B50e conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) :For fixed Portion : Powder coated aluminium (minimum thickness of powder coating 50 micron)D.S.R. Item No. (a) 21.1.1.2 |
| 15 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) D.S.R. Item No. (b) 21.1.2.2 |
| 16 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 5.0 mm thicknessD.S.R. Item No. 21.3.2 |
| 17 | Providing and laying vitrified Paring / Industrial tiles in different sizes(thickness to be specifiedby the manufacturer) with water absorptionless than 0.08% and conforming to IS: 4457:2007, of approved make, inall colours and shades, laid on 20mm thick cement mortar 1:4(1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matchingpigments etc., complete. Size of Tile 300x300 x 10 mm sizes.B.C.D. S.O.R. Item No. 5.6.27 |
| 18 | Providing andlaying20 mm , thick whitekotastoneslab flooring of approved quality over 19mm . thick base of limemortar (1:1:1)(Lime putty: surkhicoarse sand) laid and joined with white cement slurry including rubbing and polishing ----do----600x600 mm sizeB.C.D. S.O.R. Item No. 5.6.19(iv) |
| 19 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.D.S.R. Item No. 8.31 |
| 20 | Providing 6mm cement plaster (1:4) in ceiling with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.7.6 |
| 21 | Providing 12 mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes androyalty all complete as per specification and direcition of E/l.B.C.D. S.O.R. Item No. 5.7.3 |
| 22 | Providing TMT steel reinforcement 8mm, 10mm, 12mm & 16mm dia bars as per approved design and drawing excluding carriage of M.S bar to work site, cutting, bending end binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.5.4 : 8mm dia Bar - |
| 23 | B.C.D. S.O.R. Item No. 5.5.5 (a) : 10mm dia Bar - |
| 24 | B.C.D. S.O.R. Item No. 5.5.5 (b) : 12mm & above dia Bar - |
| 25 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.D.S.R. Item No. 13.80 |
| 26 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty where required, scaffolding, washing of floors and taxes all complete as per specification and direction of E/I.B.C.D. S.O.R. Item No. 5.8.18 |
| 27 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).D.S.R. Item No. 13.47.1 |
| 28 | Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.8.32 |
| 29 | Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly, scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.8.43 |
| 30 | Making plinth protection 50mm thick of cement concrete 1:3:6 over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated andgroutedwithfinesand,includingnecessaryexcavation,levelling& dressing & finishing the top smooth.B.C.D. S.O.R. Item No. 5.3.8 |
| 31 | Providing 150mm wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 125mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.S.O.R. Item No. 5.10.34 |
| 32 | Supplying, fitting and fitting vitreous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed C.I. or M.S. brackets 32m C.I. brass waste, 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350 grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.D.W. & S. Item No. 3.2.5 |
| 33 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.D.S.R. Item No. 18.8 / 18.920mm dia |
| 34 | 32mm dia |
| 35 | Providing and fixing male ended bib cock of approved quality (wt. not less than 350 gms.) with extra socket all complete as per specification and direction of E/I.D.W. & S. Item No. 3.1.5.115mm dia Brass Bib Cock |
| 36 | Providing and fixing brass/C.I. stop cock of approved quality as per specification and direction of E/I.D.W. & S. Item No. 3.1.6Brass stop cock - 15mm dia |
| 37 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.D.S.R. Item No. 18.48 |
| 38 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) 110mm dia Single socketed pipes.D.S.R. Item No. 12.41D.S.R. Item No. 12.41.1 |
| 39 | D.S.R. Item No. 12.41.2 |
| 40 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.D.S.R. Item No. 12.42Single tee with door - 75mm |
| 41 | Single tee with door - 110mm |
| 42 | Bend 87.5° - 75mm |
| 43 | Bend 87.5° - 110mm |
| 44 | Shoe (Plain) - 75mm |
| 45 | Shoe (Plain) - 110mm |
| 46 | Supplying, fitting and fixing viterous white glazed earthen ware I.W.C of Parry Hindustan or any other I.S.S approved make with 100mm H.C.I \"p\" trap 15 liters C.I. or C. pull and let go flushing cisternofnames or other I.S.S equivalent make, complete with all fittings. C.I or C.Cbrackets 32mm alkathene/P.V.C telescopic flush, pipe about 2M long with one brass coupling and clamps G.I chain and pull includingsupplyingand fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I body brass spindle stope cock of weight not less than 50 grins. 15 mm P.V.C connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.580mm long with 12.5 litre low level P.V.C. cisternD.W. & S. Item No. 3.2.1 |
| 47 | Supplying, fitting and fitting vitreous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed C.I. or M.S. brackets 32m C.I. brass waste, 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350 grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.D.W. & S. Item No. 3.2.5 |
| 48 | Providing coarse clean local sand filling in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and 1.5 M lifts including ...do...specification and direction of Engineer Incharge (Mode of measurement compacted volume) (B.C.D. SOR 5.1.10) |
| 49 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design& shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.DSR/16.68 |
| 50 | Earthwork in excavation in foundation trenches in ordinary soil(vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 m includingall lifts, levelling , ramming the foundation trenches, removing roots of trees, serbs all complete as per approved design,building specification & direction of E/I. (5.1.1) |
| 51 | Providing coarse clean sand in fillinginfoundationtrenchesorin plinthincludingrammingand wateringinlayersnotexceeding 150mmthickwithallleadsand lifts including\" cost of all materials, labour,royaltyandtaxesall complete as perbuilding specificationanddirectionofE/l (Modeofmeasurement complacted volume).(5.1.10) |
| 52 | Providingdesignation75Aone brickflatsolingjointsfilledwith localsandincludingcostof watering taxes royalty all complete asperbuildingspecificationand direction of E/l.(5.6.1) |
| 53 | Providing And Fixing in position cement concrete of specified grade excluding the coast of centering and shuttring -All work up to plinth level .1:11/2:3 (1 cement :11/2 coarse sand(Zone-III):3 graded stone aggregate 20mm nominal size)(5.3.1.1) |
| 54 | Providingdesignation75Abrick workinC.M.(1:4)infoundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.(5.2.2) |
| 55 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :Baffle wall(5.3.10) |
| 56 | Providing 19 mm thick water proof cement plaster (1:3) with clean coarsesandofF.M.1.5with5% cicooranyotherapprovedwater proofingcompoundincluding screening, curing with all leads and lifts of water, scaffolding taxes androyaltyallcompleteasper building specification and direction of E/l.(5.7.15) |
| 57 | Providing1.5mmcementpunning including curing,carriage of water with all leads and lifts as per building specification and direction of E/l.(5.7.11) |
| 58 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).(5.3.11) |
| 59 | Supplying & Fixing C.I. Cover without frame -do-do- all complete job 455mm x 610mm Rectangular DSR-19.18.1 |
| 60 | ProvidingTorsteelreinforcement of 8mm. dia. rods as per approved designanddrawingexcluding carriage of M.S. bars to work site , cutting,bendingandbindingwith annealedwirewithcostofwire, removal of rust placing the rods in positionallcompleteasper building specification and direction of E/l. TMTFe 500 ( Only valid for SAIL / TATA steel ) 5.5.4 |
| 61 | Providing M.S. foot rests including fixinginmanholeswith20x20x10 cmcementconcreteblocks1:3:6 (1cement:3coarsesand:6 gradedstoneaggregate20mm nominal size) as per standarddesign : With 20x20 mm Square Bar DSR19.15.1 |
| 62 | ProvidingandfixingS.W. interceptingtrap in manholes with stiffmixtureofcementmortar1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : DSR 19.34.2 150mm dia |
| 63 | Makingsoakpit2.5mdiameter3.0metredeepwith45x45cm drybrickhoneycombshaftwith bricksandS.W.drainpipe100 mm diameter, 1.8 m long complete as per standard design. DSR 19.32.1 |
| 64 | Supplyingmaterials andlabours forconstructing inspection chamber of designation class 75 B brickssize750mmdeep,600x 450 internal dimension having 250 mm wall thickness in cement mortar(1:6)including12mm cement plaster ( 1:4 ) with punning on inside and cementplaster (1:6 )with600x475mmG.I.cover withframe(Weightnotlessthan 36 Kg.) in foundation andrefilling allcompleteasperspecification and direction of E/l. BCD 3.3.8 Corr |
| 65 | Electrical work |
| 66 | Carriage of materials including loading, unloading, stacking -do- -do- all complete as per specification and direction of E/I.(i) Cement |
| 67 | (ii) Sand |
| 68 | (iii) Bricks |
| 69 | (iv) Steel |
| 70 | (v) Stone Chips |
| 71 | (vi) Paver Block |
| 72 | GST @ 18% |
| 73 | Labour cess @ !% |
