Tender For Construction Of Public Distribution Shop Building Under Agamt-Ii 2022-23 In Kodavasal Block, Kandiramanickam Panchayat,Tiruvarur District - Package -08
Tender Value
12.21 Lakhs
Estimated cost
Bid Submission
01 Dec 2022
0 days left
EMD
12210
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kodavasal → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Public Distribution Shop Building Under Agamt-Ii 2022-23 In Kodavasal Block, Kandiramanickam Panchayat,Tiruvarur District - Package -08
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Public Distribution Shop Building Building at Kandiramanikam Panchayat |
| 2 | Earth work Excavation and depositing on bank with initial lead and lift in all classes of soil except hard rock requiring blasting including all labour charges etc.,complete for for foundation upto |
| 3 | Supply Filling in foundation and basementwith crushed stone sand including cost and conveyance of all materials to site and all labour charges etc complete |
| 4 | Supply Filling in foundation and basement With Gravel including cost and conveyance of all materials to site and all labour charges etc complete |
| 5 | Cement concrete 1 : 4 : 8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed. |
| 6 | Brick work in cement mortar 1:5 mix using country bricks 83/4\"x41/4\"x21/4\" and conveyance of all materials to site and all labour charges etc complete |
| 7 | I.Foundation and Basement |
| 8 | II. Superstructure- Ground floor |
| 9 | Brick partition walls using country bricks of size 83/4\"x41/4\"x23/4\" etc., complete. |
| 10 | Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., ). |
| 11 | I.Centering below basement |
| 12 | II. LINTELS, RCC SLABS,BEAMS, TEE or ELL BEAMS, |
| 13 | III. SUNSHADES |
| 14 | Supplying and Fabricating and placing in position MS steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc,Complete complying with stanard specification. |
| 15 | Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick. and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications. |
| 16 | I. Upto Basement |
| 17 | II. Superstructure- Ground floor |
| 18 | Plastering with CM 1:3,10mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers. |
| 19 | Special Plastering with cement mortar 1:3 mix to 10mm thick including cost and conveyance of all materials to site and all labour charges etc complete. |
| 20 | Plastering with CM 1:5,12mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers. |
| 21 | Ceramic tiles flooring laying with new ceramic tiles of size 300x300x6 mm laid in C M 1:3 inculding cost of white cement and labour charges etc |
| 22 | Dadooing with glazed tiles of size 150x150x6mm includingcost and conveyance of all materials to site and all labour charges etc complete |
| 23 | Granolethic floor finish with cement concrete 1:2:4 mix using 10-12mm ISS chips including costand conveyance of all materialsand all labourchargesetc, complete. |
| 24 | Cement concrete 1:2:4 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete |
| 25 | Finishing the top of the roof with one course of machine pressed tiles including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete |
| 26 | White washing two coatsusing shell lime including cost and conveyance of all materials to site and all labour charges etc comoplete. |
| 27 | Distemperingtwo coatsover priming coatinculding cost and conveyance of all materials to site and all loboure charges etccomplete |
| 28 | Exterior emulsion two coatsover priming coatinculding cost and conveyance of all materials to site and all loboure charges etccomplete |
| 29 | Painting two coats over new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., withbest approved best quality of synthetic enamel paint of approved colour over the existing priming coat etc., complete |
| 30 | Supplying & fixingwith cuddapah slabs including cost and all labour charges etc complete. |
| 31 | Fabrication and supply of mild Steel Doors and Windowsof any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 |
| 32 | i. Steel Door 1.1 x 2.10 m |
| 33 | ii. Steel Door 1.0x 2.10 m |
| 34 | iii. Supply of window of size 1.20 x 1.30 m |
| 35 | iv. Supply of Ventilator of size 0.60 x 0.45 m |
| 36 | v.Rolling Shutter RS-1 |
| 37 | vi.Rolling Shutter RS |
| 38 | Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wallwith3 mm thick Hylum sheet cover withTW boxAnd 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good ofthe concealed portion with suitable colour for PVC concealed Light point / fan point (For electronic Regulator) SD 24 |
| 39 | Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutorof 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wallwith150 mm X 100 mm X 113 mm TW switch boxwith3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plugwith continuous earth wire connection of 14 SWG TC wire for making good ofthe concealed portion with suitable colour forconcealed PVCplugpointSD 37 |
| 40 | Supply and fixing of 16 Amps DPIC Switch of 500 V with fuse and neutral (Side Handle) on suitable TW box PWD EarthingSD 142 |
| 41 | DPIC Switch |
| 42 | Supplyingand fixing of water tight Bulk head fitting with guard (Philips/bajaj/crompton/Klite) suitable for incandescent lamp and 60W bulb . [SI 85] |
| 43 | Bulk head Fitting |
| 44 | Supplying and fixing of CFL bulb |
| 45 | CFL bulb |
| 46 | Supplying and fixing of Ceiling FAN |
| 47 | i,Ceiling FAN |
| 48 | ii, Service wire |
| 49 | iii,service Pipe |
| 50 | Supplying and fixing in position Indian closet (9oriya type) of size 580 X 400 mm white glazed earthern ware of approved quality and brand with \"p\" of \"S\" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40 mm broken , brick jelly in lime concrete 1:2:5 (One Lime, Two Sand, and Five nrick jelly) 100 mm thick and finishing the top to the require slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) bydismantling brick masory wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete compleying with standard |
| 51 | Supplying and fixing in position best quality and approvedmakeIndianmadewhite/colourglazed earthernware wash hand basin of size 550 x 400mm(with pedestal/ withoutpedestal)witha pairofcastironbrackets,includingcost15mmdia brassCP pillartap,32mmdia\"B\"classGI wastepipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mmdiaCPbrasswastecouplingincludingfixingof wash basin using CI brackets on to the wall in position with TW plugsand screws,rubberwashers,white lead andgiving necessary watersupply connection and paintingthebracketswithtwo coatof paintingovera primingcoatofanti-corrosivepaintincludingtesting forleakagesetc.,completecomplyingwithstandard specification and as directed by the departmental officers.(Thewashhandbasinand specialsshouldbe got approvedby the ExecutiveEngineerbefore use on |
| 52 | Supplyingandfixinginposition15mmdiabrassCP screwdowntap/Pillartap(heavyduty)ofapproved make conforming to BIS specificationsand quality includingcost of shellac, thread,etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by theExecutive Engineer before use on the works,(15mm dia CP Screw Down Tap) |
| 53 | Supplying,layingandjointingUPVCpipesofapproved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials usingUPVCadhesives(butexcludingcost ofsuchspecials)andfixingintowallwithteakwood plugs,PVCclampsandscrewsmakingholesonthe wall (or)drilling holes in the roof and makinggood the dismantledportiontooriginalconditionwithnecessary brick work / cement concrete and plastering neatly wherevernecessarywithnecessaryscaffoldingcharges upto4 metreheight abovegroundlevel, etc., complete complyingwith standard specifications |
| 54 | 25mm Dia UPVC Pipe |
| 55 | 20mm Dia UPVC Pipe |
| 56 | Supplying andfixing UPVCspecials including labourcharges etc. complete |
| 57 | Tee |
| 58 | Elbow |
| 59 | Bend |
| 60 | 25x20mm Reducer |
| 61 | 20 mm dia |
| 62 | Tee |
| 63 | Elbow |
| 64 | Bend |
| 65 | 20x15mm Reducer |
| 66 | Supplyingandfixingin positionbestqualityPVCsoil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS markand providing leakproof joints usingPVCadhesivesincludingfixingtothewallwith special PVC / MS clamp, teak wood plugs, brass screws,etc.,andmakingconnection toallsanitary fittings,dismantlingmasonry/ RCCworkswherever found necessary and making the good dismantled portiontotheoriginalcondition,includingtestingfor anyleakages,etc.,completecomplyingwithstandard specifications.(The PVC pipes should be got approved bytheExecutiveEngineerbeforeuseonworks).The rateforearthworkexcavationwillbemeasuredand paidseparatelyinthecaseswherethepipelinesare proposed to laid belowground level |
| 67 | 110mm dia PVC soil /waste pipe |
| 68 | 75mm dia PVC soil /waste pipe |
| 69 | Supplying and fixing in position PVC Specials of the following dia and types of approved quality conforming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-complete complying with standard specification. (The PVC Special should be got approved by the Executive Engineer before use on works) |
| 70 | i, 110 mm Tee |
| 71 | ii, 110 mm Elbow |
| 72 | iii, 110 mm Bend |
| 73 | i, 75 mm Tee |
| 74 | ii, 75 mm Elbow |
| 75 | iii, 75 mm Bend |
| 76 | Supplying,layingandjointingglazedstonewarepipes of thefollowingdiaof approvedqualitywithspigotand socket endsandfixingthemindryconditionusing spunyarn and cementincludingpetty masonry shoring and struttingwhereverfoundnecessaryandlayingthe pipeline inthealignmentatthe specifiedgradientand testingwithnecessarytoolsandplants,etc.,andre-fillingthetrenchwith excavatedearthand levellingthe ground etc., complete (100 mm dia Pipe) |
| 77 | Provision For Name board Charges |
| 78 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package} |
AI Tender Summary
Tender Timeline
Nov 26, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedDec 01, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 01, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender