Tender For Construction Of Community Hall At Trehgam (Balance Work)
Tender Value
34 Lakhs
Estimated cost
Bid Submission
02 Dec 2022
0 days left
EMD
68000
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
trehgam → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Community Hall At Trehgam ( Balance Work )
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manually/mechanicallymeansin Trenches for foundation, drains, pipes, cables etc. (not exceeding 1.5 m in width)and for shafts ,wells, cesspits and the like not exceeding 10 Sqm on plan, depth up to 1.5 mtr including disposal of excavated earth up to 1M from cutting edge , disposed is to be leveled and neatly dressed in. All kinds of soil |
| 2 | Providing & laying of Dry stone soling tightly hand packed on horizontal level incld. Hand ramming and all carriages upo site of workcomplete |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level a. 1:4:8 (1Cement: 4 coarse sand: 8 grade stone aggregate 20mm nominal size) Crushed incl. all carriagesupo site of work complete |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level1:3:6 (1:Cement: 3 coarse sand: 6 grade stone aggregate 20mm nominal size) Crushed all carriagesupo site of work complete |
| 5 | Brick work with F.P.S bricks of class designation 75 in foundation & Plinth incement mortar in 1:6 (1 cement: 6 coarse sand)ncl.carriages ofbricks upto site of work complete including extra upto floor V-level. incl. all carriages of material involved. |
| 6 | Providing and laying of cooping 50mm thick (1:2:4 Mix) :2:4(1cement: 2 coarse sand: 4 graded stone agg incl. finishing with floating coat of neat cement all leads , lifts and all carriages of material upto site of work complete |
| 7 | 50mm thick cement conc. flooring in 1:2:4(1cement: 2 course sand: 4 graded stone agg. Finished with a floating coat of neat cement slurry, but excl. the cost of noising of steps etc complete incl.all carriages complete (crusher ) |
| 8 | Dry random rubble masonry with hard stone in founding and plinthusing quarry stone with bond stone . |
| 9 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement (1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Reinforcement for RCC work including straightening cutting bending placing in position and binding all compelte hot rolled deformed bars. incl.all carriages upto site of work complete. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work for foundations, footings, bases for columns etc complete, Suspended floors, roofs, landings, balconies and access platforms |
| 12 | Centering and shuttering incl. strutting propping etc and removal off form work for abutemnts , Wings / Return Walls |
| 13 | 15mm thick cement sand plaster1:6 mix (1 cement 6 fine sand ) incl.all carriagesupo site of work complete |
| 14 | Providing and applying plaster of Paris POP putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete incl. all involved materials form source to site of work complete. |
| 15 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade old work (one or more coats) |
| 16 | Providing and fixing of 12mm Nordic Pine paneling 4\"/5\" wideover plywood 12mm thick fixed all over walls on jamb work of 2” x 1.5” plywoodstandard make incl. corine preparing surface for melamine polishing incl. warnishing incl. all carriages and cost of material involved completejob As per direction of Inchrage Engineer |
| 17 | Providing and fixing ofpanalled and glazedshuttersincluding ISI marked but hingesbright finishedof required sizewithnecessaryscrews including panalling /glazingwith fixturescompletejob 35mm(Ist class kail wood) |
| 18 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge(First class kail wood) |
| 19 | Providing & fixing of 4mm glass panes with beeding incl. all fittings and fixtures complete job. |
| 20 | Providing and fixing plained eaves boarding of 2nd class Kail wood(250 x32mm nomianal Size) incl. all fittings , fixtures and scaffolding with all carriage upto site of workcomplete |
| 21 | Providing and fixing 20mm thick wooden ceiling Plankswith frame work(for soffits) incl. all fittings , fixtures and scaffolding with all carriage upto site of workcomplete (Budloo Wood) |
| 22 | Providing and applying ofsnow cem on outer walls of the buildingcomplete . As per direction of Engineer Incharge |
| 23 | Applying priming coat with ready mixed pink or gray of approved brand and manufacture on wood work. incl. all carriages of material involved. |
| 24 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on New work.incl. all carriages of material involved. |
| 25 | Providing and fixing of ceramic glazedfloor tiles300x300mm( thickness to be specified by the manufacturers)of1st quantity confirmingto IS;13755 of NITCO,ORIENT,SOMANY,KAJARIA or equivalent make in colour such as white ivoryGrey fume Red, brown laid on 20mm thick bed of cement mortor 1:4(1cement: 4 coarse sand)including pointingthe joints with white cement and matchingpigment etc complete. |
| 26 | Providing and fixing of ceramic glazed Wall tiles300x300mm( thickness to be specified by the manufacturers)of1st quantity confirmingto IS;13755 of NITCO,ORIENT,SOMANY,KAJARIA or equivalent make in colour such as white ivoryGrey fume Red, brown laid on 20mm thick bed of cement mortor 1:4(1cement: 4 coarse sand)including pointingthe joints with white cement and matchingpigment etc complete. |
| 27 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completeSize of tile 600x600 mm |
| 28 | Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with: |
| 29 | Square manholes upto 0.30Sqm clear inner size on plan , upto 0.60mm deep , including concrete foundation, brick work , plaster , forming hunching and half round drains connecting upto incoming and outgoing pipes and setting frame for cover complete |
| 30 | Providing and fixing of GI pipes completed with G.I. fittings and clamps including cutting and making good the walls etc internal work 20mm and nominal bore medium |
| 31 | Providing and fixing of GI pipes completed with G.I. fittings and clamps including cutting and making good the walls etc internal work 15mm and nominal bore medium |
| 32 | Providing and fixingwash basin with C.I.brackets 15mm.C.P. brass pillar taps 32mm C.P.brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever required .stain less steel AISI-304(18/8) of size 630x450mm C.P.brass pillar tap. |
| 33 | Providing and fixing white vitreous china pedestal for wash basin complete recessed at the back of the reception of pipe and fittings ( Standard quality of make PARKO, JAGUAR or Like etc complete |
| 34 | Providing and fixing water closet squatting pan ( Indian type W.C pan) with 100mm sand cast Iron P or S trap 10liter low white P.V.C flushing cistern incl. flush pipe approved make manually controlled device ( handle lever ) conforming to IS; 7231 ,with all fitting and fixtures complete including cutting and mixing good the walls and floors whereverrequiredstainless sated AISI.304 (18/8) Orissa pattern WC pan of size 585x480mm with flush pipe & integrated type foot rests |
| 35 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. (Standard quality of Make Parko Jaquar or Like) |
| 36 | Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 PARKO Made) incl. all cost and carriages complete |
| 37 | Providing and fixingof C.P.brass angle value for basin mixer and gyser points of approved make conforming to IS 893115mm nominal bore. |
| 38 | Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers complete. |
| 39 | Providing and fixing PTMT Towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. |
| 40 | Providing and fixing 100mm sand CostIron grating for gully , floor or Nahani trap |
| 41 | Providing and fixing ofapproved brand stain less steel soap dish includingall fittings. |
| 42 | Providing and placing on terrace (at all floor levels) polyethy lene water storage tank ISI:12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and the base support for tank ( sintex , Electroplast , Star , Lotus or equivalent having valid ISI license)incl. all cost and carriages upto site of work complete. |
| 43 | Providing and fixing of water heater (Gyser) of 50ltrs capacity of approved quality like( venous ,Racoldor equivalent)incl. all fittings complete. |
| 44 | Providing and fixing C.P. brass close hole wash basin mixer piller tap of approved quality and make, weighing not less than 1.970 kg |
| 45 | Providing and fixing of soil waste and vent pipe 100mm dia PVC incl. All bends Tees and other Fixtures Prince Venus or likea. 100mm dia |
| 46 | Providing and fixing of PVC connection 15mm dia of approved and standard manfacture prince brand |
| 47 | Providing and fixing of PVC pipes ofapproved and standard manfacture prince brand Bend/Elbows (100mm dia) |
| 48 | Providing and fixing of PVC pipes ofapproved quality incl. Bend/Elbows (75mm dia) |
| 49 | Providing and fixing of gun metal gate valuewith c.i. wheel of approved quality complete(20mm dia) |
| 50 | Providing and fixing of gun metal gate valuewith c.i. wheel of approved quality complete(15mm dia) |
| 51 | Providing and fixingof 1 Horse Power Water Mortar (Pump) of approved qualityincl. all cost and carriages complete (carpatan, or like ) |
| 52 | Supply and filling of nallah muck incl. compaction ,ramming dressing watering and consolidation and all carriage upto site work completejob. |
| 53 | Supply and stacking of graded stone agg 53-22.4mm size(crushed/quarry)incl. Supply and stacking of stone screenings/chippings at site 11.20mmnominal size (Type –B) incl. Laying of WBM with specified stone agg. Stone screening and binding material incl. screening sorting spreading to template and consolidation with PRR8-10 tonne capacity etc. Incl. all carriages upto site of work by MT. |
| 54 | Providing and laying of RCCspun Pipes NP3 on 1st class bedding of granular material including fixingcollar with cement mortar 1:2, earth work in excavation and backfilling the same as cushioning and including cost and carriage of all material from approved source to site of work , with all leads lifts , loading unloading , handling , re-handing complete job. The job incl. carriages and head loads from dumping site to working site at different spots as directed by Engineer In charge i. 18\" dia |
| 55 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
AI Tender Summary
Tender Timeline
Nov 26, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedDec 02, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 02, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender