Tender For Provision Of Bathroom Near Bldg No Tb-230 At Adhoc Transit Camp Including Provn Of Certain Minor And Revenue Works At Baisakhi Area Of Age B/R Ii Under Ge 859 Ews
Tender Value
45 Lakhs
Estimated cost
Bid Submission
16 Dec 2022
0 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
TENGA VALLEY → Arunachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provision Of Bathroom Near Bldg No Tb-230 At Adhoc Transit Camp Including Provn Of Certain Minor And Revenue Works At Baisakhi Area Of Age B / R Ii Under Ge 859 Ews
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-Dec-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-Dec-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil. |
| 2 | Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m deep for foundation and getting out in hard/dense soil. |
| 3 | Returning/filling in including spreading, levelling, watering and well remming in layers n.exc 25 cm in hard/dense soil. |
| 4 | Removing excavated material n.exc 50m and depositing where directed at a level n exc 1.5m above the starting point. |
| 5 | M&L for PCC 100mm thick, type B-2, 1:2:4 (using 40mm graded sone agg) in sub-floors, sub-base, floors and pavings etc. |
| 6 | M&L for cement concrete type D-2, 1:4:8 (using 40mm graded aggregates)in Cement concrete in foundations, filling and mass concrete. |
| 7 | M&L for 100mm thick cement concrete type D-2, 1:4:8 (using 40mm graded aggregates)in subbase finished rough. |
| 8 | M&L for 75mm thick cement concrete type D-2, 1:4:8 (using 40mm graded aggregates)in subbase finished rough. |
| 9 | M&L for hard core of gauge n.exc 63mm, deposited, spread and levelled in layers nexc 15 cm thick, using broken stone or boulders, watered and rammed to a true surface. |
| 10 | M&L for plain cement concrete 75mm thick type C-2, 1:3:6, (40mm graded stone aggregate) as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement. |
| 11 | M&L for PCC 1:3:6 type C-1(using 20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete. |
| 12 | M&L for rendering 10mm thick in CM 1:6on concrete inner surfaces finished even and smooth without using extra cement . |
| 13 | M&L for rendering 15mm thick in CM 1:4on concrete outer surfaces finished even and smooth without using extra cement . |
| 14 | M&L for Prepairing surfaces plastered or unplastered newly surfaces with two coats of cement base paint over one coat of white wash as completed. |
| 15 | Material and labour for 10mm thick rendering in cement mortor(1:4) on brick or concrete walls surfaces as backing coat for ceramic tiles. |
| 16 | M & L for 350 x 250 x7 mm or 450x350x7mmthick glazed coloured ceramic tiles on vertical surface of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. (Make; Kajaria/ Orient Bell/ Johnson/ Somany).Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval ofcolour and pattern of tile by GE/Engr-in-charge. |
| 17 | M & L for screed bed or bedding layer of15 mm thick for laying floor finishes in CM (1:6 ). |
| 18 | M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding .38 sqm, in vertical surfaces etcset and jointed in neat cement slurry and pointed in white/coloured cement to match the shade . (Make; Kajaria/ Orient Bell/ Johnson/ Somany).Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval ofcolour and pattern of tile by GE/Engr-in-charge. |
| 19 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. |
| 20 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm widthtuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of lain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheetbeading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 21 | S&F rolled mild steelfor Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections)incl distance pieces, cleats etc, Fe-290 (Gde E- 165). |
| 22 | M&L for clean sawn Second class hard-wood in scantlings complete all as specified and directed. |
| 23 | S&F 4mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work for ceiling work. |
| 24 | M&L for 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed. |
| 25 | M&L for preparation of new or previously untreated surfaceofwooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 26 | S&F MS window guard bars, window frames plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 etc articles confirming to Fe 290-0 or E-165. |
| 27 | S&F 100mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed. |
| 28 | S&F 150mm longaluminium anodized, barrel tower bolts extruded section. |
| 29 | S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised. handle fabricated type. |
| 30 | S&Fvitreous china wash hand basin white flat back of size 550mmx400 mm including CI brackets and waste pipe complete all as specified and directed(Make: Hindware/Parry) |
| 31 | S&F 32mm dia waste coupling of PTMT (half or full threaded). (Minimum weight 32mm- 45gms/40mm-60 gms). |
| 32 | S & F fancy type chromium plated 15mm dia pillar taps fancy type copper alloy with capstan heads,screwed down high pressure, with or without lettered \"hot or cold\" with long screwed shanks and fly nuts, screwed for iron pipe and fixed. |
| 33 | Supply andfix chromium plated brass Bib taps,cast copper alloywith crutch or butterfly handle, screwed down for iron pipe for 15mm bore GI tubing complete all as specified and directed by Eng-in-charge. |
| 34 | S & Flooking mirror 600 mm x 450 mm bevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers .(Make :Swastic /Kohinoor /Gold fish /Atul) . |
| 35 | S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 105gms) |
| 36 | S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints laid in trenches or floors. |
| 37 | M&L for cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) to bed of drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 110 mm bore pipe complete all as specified and directed |
| 38 | S&F PVC (SWR) bends any radius with access door, 110mm dia. |
| 39 | S&F PVC (SWR) bends any radius with access door, 75mm dia. |
| 40 | S&F PVC (SWR) junction single, (Single T) equal or unequal of dia110mm. |
| 41 | S&F PVC (SWR) junction single, (Single T) equal or unequal of dia75mm. |
| 42 | S&F PVC (SWR) pipes 75mm dia single sockted in any length with rubber ring joints laid in trenches or floors. |
| 43 | S&F75 mm diaPVC (SWR) floor trap, plain with grating including jointing with solvent cement. |
| 44 | S&F Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) |
| 45 | S&F 20mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches.(Make : Jindal/Nezone/NTL/Bansal) |
| 46 | S&F 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches.(Make : Jindal/Nezone/NTL/Bansal) |
| 47 | S&FPVC connection of 15 mm size withPTMT nuts of length 600 mm. |
| 48 | S&F Grating doom 100 mm dia with with waste hole of PTMT (mminium weight 25 gms) |
| 49 | S & F fancy type chromium plated 20mm dia stop valve , cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified. |
| 50 | S & F fancy type chromium plated 15mm dia stop valve , cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified |
| 51 | S&F Mild steel flat ironas in hold fasts; complete all as specified. |
| 52 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified . |
| 53 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified . |
| 54 | M&L for providing precast reinforced cement concrete 1:2:4 type B1 using 20 m gradedstone aggregate as in landings,staircase slab, cover slabs(for men holes etc) chullah hoods,chhajjas water troughs mangers,shelves and similar articles with plain faces. |
| 55 | M&L for Mild steelTMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips. |
| 56 | S&F PVC water storage tanks of 500 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified |
| 57 | S&F ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified (Make:Jindal/Leader/Scico). |
| 58 | S&F Gun metal 20mm bore globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed. |
| 59 | S&F Gun metal 15mm bore globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed. |
| 60 | M&L for sand filling under floors or in foundations including watering and consolidation and well ramming complete all as specified and directed. |
| 61 | M&L for machine pressed precast conctete interlocking paver block with gray cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade complete all as specified and directed. |
| 62 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide for rough finished surface complete all as specified and directed. |
| 63 | Demolition of cement concrete (un-reinforced) in ground floor and pavings n exc 15 cm thickness (below or above ground level)complete all as specified and directed. |
| 64 | M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) as insubbase for floorings complete all as specified and directed. |
| 65 | M&L for 25mm thick screed bed or bedding layer of mortar for laying floor finish with CM 1:6 finished rough. |
| 66 | M&L for 20mm thick screed bed or bedding layer of mortar for laying floor finish with CM 1:6 finished rough. |
| 67 | Material and Labour for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 68 | M&L for providing, cement concrete type B1 (1:2:4) using 20 mm graded aggregate in roof kerb or mud stops, rounded or chamfered on edges including necessary formwork complete all as specified and directed. |
| 69 | M&L for Chequered cement concrete tiles 200x200x25mm etc. setand jointed and pointed in neat cement slurry in floor with grey cement and pigment all as directed. |
AI Tender Summary
Tender Timeline
Dec 09, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Dec 16, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedDec 16, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 17, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender