Tender For Provision Of Toilet And Allied Works For Nfs Sites At Afs Kumbhirgram
Tender Value
11 Lakhs
Estimated cost
Bid Submission
01 Dec 2022
0 days left
EMD
22000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kumbhirgram → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provision Of Toilet And Allied Works For Nfs Sites At Afs Kumbhirgram
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth, for foundation, etc or for shafts, wells, cesspits, manholes, pier holes andgetting out in soft/loose soil. |
| 2 | Materials and labour for plain cement conrete type D2, 1:4:8 (40 mm graded aggregat) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 3 | Use and waste formork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sidee and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter for fair finished surfaces of concrete complete all as specified and as directed. |
| 4 | Use and waste formork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mmthick for fair finished surfaces of concrete complete all as specified and as directed. |
| 5 | Use and waste formork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces of concrete complete all as specified and as directed. |
| 6 | Supply and fix Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed . |
| 7 | Supply and fix Mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed . |
| 8 | Materials and labour for reinforced cement concrete, design mix M-25 (using 20mm graded aggregates) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc,complete all as specified and as directed. |
| 9 | Materials and labour for reinforced cement concrete, design mix M-25 (20mm graded aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and as directed. |
| 10 | Materials and labour for reinforced cement concrete, design mix M-25 (20mm graded aggregates) as in columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 11 | Materials and labour for old size brick work with sub class \"B\" bricks, in full brick thick, straight or cuved on plan, exe. 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed. |
| 12 | Materials and labour for old brick work with sub class \"B\" bricks, in half brick thick, straight or cuved on plan, exe. 6 m mean radius, built in cement mortar 1:4 complete all as specified and as directed. |
| 13 | Retruning filling in, including, spreading, levelling, watering and well ramming in layers not exceeding. 25 cement mortar complete all as specified and as directed. |
| 14 | Removing excavated material not exceeding. 50 mtr and depositing where directed at a level not exceeding. 1.5 m above the starting point complete all as specified and as directed. |
| 15 | Material and labour for rendering 10 mm thickin cement mortar 1:4 on fair faces of brick work or concrete surfaces complete all as specified and as directed. |
| 16 | Material and labour for rendering15 mm thick in cement mortar 1:6 on other than fair face of brick workcomplete all as specified and as directed. |
| 17 | Material and labour for rendering10 mm thick with (cement mortar 1:3) for fixing wall tiles on skirting /dados complete all as specified and as directed. |
| 18 | Material and labour forbroken stone or boulders, Hardcore of gauge exc 63 mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cement mortar thick, watered and rolled / rammed to a true surface complete all as specified and as directed. |
| 19 | Material and labour for 100mm thick plain cement concrete type C-2, 1:3:6 (40 mm graded aggregate) as in sub base of floors complete all as specified and as directed. |
| 20 | Material and labour for 75 mmthick plain cement concrete type C-2, 1:2:4(40 mm graded aggregate) as sub base of floors complete all as specified and as directed. |
| 21 | Material and labour for screed bed and bedding layer of 15mm thick in cement mortar (1:6)for laying floor tiles, floor finishes completecomplete all as specified and as directed. |
| 22 | Supply and fixfor non skid coloured ceramic tiles 6mm mm thick, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed incoloured cement to match complete all as specified and as directed. |
| 23 | Material and labour for glazed ceramic coloured tiles size 300 x 200 x 7 mm on vertical surfaces like skirting / dados,set jointed in cement slurry and pointed with white cement and pigment complete all as specified and as directed. |
| 24 | Material and labour for75 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection,finished even and smooth without using extra cement complete all as specified and as directed |
| 25 | Material and labour for plain cement concrete type C2 (1:3:6) using 40 mm graded aggregate as in surface channel / drain.complete all as directed |
| 26 | Extra for forming fair finished drain or channel 30cement mortar inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.complete all as specified and as directed |
| 27 | Material and labour for pre cast reinforced cement concrete 1:2:4 type B1 as in cover slab of manhole, septic tank soak well, gully trap etc. set in Cement mortar (1:4) complete all as specified and as directed. |
| 28 | Supply and fix vitreous china squatting pan of pattern long pan water closet, size 580 mm white with \"P\" or \"S\" trap, front or back inlet and foot rest, any pattern complete all as specified and as directed. |
| 29 | Supply and fix Low levelPVC valveless, syphonic action type flushing cistern white, with inlet, ball valve, float and handle including bracket connenction pipe complete all as specified and as directed. |
| 30 | Supply and fixWHB vitreous china white 550mmx400 mm (flat back or angle back type) including cutting for and pinning in end of thenew bracketswith 32 mm bore CP waste couplingfixed complete all as specified and as directed |
| 31 | Supply and Fixed Waste coupling PTMT/CP chromimum plated 32mm dia, for wash hand basins etc with long screw shankSupply and fixly nuts, plain end, bedded in red lead cement and other end fixed complete all as specified and as directed |
| 32 | Supply and fix urinal spreader of PTMT any colour for fixing with 15 mm dia pipe complete all as specified and as directed. |
| 33 | Supply and fix PVC (SWR)pipe 110 mm bore in any length with rubber joints , laid in trenches or in floors complete all as specified and as directed |
| 34 | Supply and fix PVC (SWR) bend any radious 110 mm bore withaccess doorcomplete all as specified and as directed. |
| 35 | Supply and fix 110 mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and as directed |
| 36 | Supply and fix PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed. |
| 37 | Supply and fix factory made solidpanelled PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail MS frame shall be covered with heat moulded plain colour PVC\"s channel having PVC sheet trip of 20mm wide stuck inside with solvent cement for styles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap for top rail and bottom rail panelling of plain colour PVC sheetto be fitted to the styles and rails with suitable PVC sheet beading and jointed to gether with solvent cement supplying and fixing in the frame including butt hinges at site as per specification and drawingcomplete all as specified and as directed. |
| 38 | Supply and fix 100 mm long Aluminium anodised barrel tower bolt extruded section (Conforming to IS)complete all as specified and as directed. |
| 39 | Supply and fix Extruded aluminium alloy handles, 100mm D type, anodised (Conforming to IS) complete all as specified and as directed. |
| 40 | Supply and fixing 100mm long, stainless steel butt hinges, medium weight, cold rolled (Conforming to IS) complete all as specified and as directed. |
| 41 | Material and laboursfor three coats of white wash incl. preparation of surfaces on newly plastered surfaces on walls complete all as specified and as directed. |
| 42 | Material and laboursfor applying two coats of cement base paint incl. preparation of surfaces on newly plastered surfaces on walls complete all as specified and as directed. |
| 43 | Supply and fixSteel ventilator with top hung shutter including projecting type hinges,3mm thick 100mm long copper oxidised finished mild steel handle and 3mm thick 300mm long mild steel copper oxidised steel peg stay, with applying one coat of red oxide zinc chromate primer before fixing including taking down old unserviceable steel ventilator from existing position and making good disturbaned surfaces of walls etc all as per existing specifications complete all as specified and as directed. |
| 44 | Supply and fixing GI wire cloth, .0.56 mm nominal dia of wire and average width of perature 1.18mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 45 | Supply and fix 3mm thick Sheet glass, ordinary quality and glazing with oil putty or secured with wooden beads as required in square n exc 0.5 sqm in each pane complete all as specified and as directed. Make: ATUL TUFF/ Saint Gobain/Duro tuff |
| 46 | Supply and fixingSwivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and as directed. |
| 47 | Supply and fix chromium platedSoap dish, dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. Make: Prayag/Essco/Sona (deluxe) |
| 48 | Supply and fix 15mm dia, stop valve(concealed) fancy type cast copper alloy cromium plated complete complete all as specified and as directed. Make: Prayag/Essco/ SONA (Deluxe) |
| 49 | Supply and fixing pillar tap 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipecomplete all as specified and as directed. Make: Prayag/Essco/ SONA (Deluxe) |
| 50 | Supply and fixing steel tubes, medium grade, 20mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed. |
| 51 | Supply and fixing Tubes, medium grade, 15mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed. |
| 52 | Supply and fixSheet Glass shelf assembly assembly consisting of 5.5mm thick sheet glass shelf 12cement mortar wide with chromium plated bracket guard and railing 60cement mortar long complete all as specified and as directed. |
| 53 | Supply and fixTowel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and as directed. Make: Prayag/Polytuff |
| 54 | Supply and Fix PVC connections 15 mm size with PTMT nuts of length 450 mm.complete all as specified and as directed. |
| 55 | Supply and fix grating doom 100 mm dia of PTMT (minimum weight 25gms) complete all as specified and as directed. |
| 56 | Construction of pre cast septic tank (Hume pipe) for 10 users, including excavation in soft / loose soil, PCC 1:4:8 in foundation, brick work in cement mortar 1:4, RCC slab covers, including RCC manholes cover PVC vent pipe and sludge chambers etc. complete all as specified and as shown in drawings |
| 57 | Construction of Soakage well 1.2 m dia and 3.00 m depth, excavation in soft / loose soil, foundation in PCC 1:3:6, wells of honey comb and solid brick in CM 1:4, RCC 1:2:4 cover slab, filling with brick bats, complete all as specified and as shown in drawings |
| 58 | Supply and fix 150 mm dia NP-3, RCC Hume pipe, class 2, including excavation in any type of soil at average depth of 1.5 m, inclusive 2 nos of manholesand RCC 1:2:4, covers, pipees laid on PCC 1:3:6 bedding, packing under and haunching against side of pipecomplete all as specified and as directed. |
| 59 | Supply and fixing GI tubing medium grade, ISI marked confirming to IS 1239 Part-I 2004, 20mm bore with and including all fittings such as bends, elbows, tees, short length, socket, union, check nuts, nipples etc. fixed and laid in trenches/floor/under culvert/ road crossing etc,complete all as specified and as directed. Make : Surya Prakash Tubes / Jindal /NEZONE / TATA. (Note : Excavation and earthwork shall be measured and paid for seperately). |
| 60 | All as per item No 59 here in above but size 40mm bore. |
| 61 | Supply, hoisting and fixing500 Ltr capacity multilayered, rotational moulded ploytheline water storage tank including necessary connection with water line complete all as specified and as directed. Make : SINTEX/ POLYCON |
| 62 | Supply and fix 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and hight density plastic ball screwed for iron pipe and fixed, (min wt 210 gms), complete all as specified and as directed. Make : PRAYAG/ POLYTUF |
| 63 | Supply and fix 40mm dia gate valve (Gun metal glove valve) with iron wheel head, screwed both ends for iron pipe and fixed for, complete all as specified and as directed. Make: Scud/ leader/ Zoloto. Note : The quoted rate is deemed to be inclusive of cutting, threading, insertion of union joint, nipple etc for required size of pipe. |
| 64 | Supply and fixing 20mm dia gate valves (gun metal valve) heavy duty confirming to IS-778 with iron wheel head screwed both ends suitable for fixing,complete all as specified and as directed. Make: Scud/Shakti/Leader/Zoloto.Note : The quoted rate is deemed to be inclsive of cutting, threading, insertion of union joint, nipple etc for the required size of pipe |
| 65 | Material and Labour for cutting and screwing existing steel tubing for tapping additional line of 40mm pipe complete all as specified and as directed. Note : The quoted rate is deemed to be inclusive of cutting, threading, insertion of union joint, nipple etc for required size of pipe. |
| 66 | Supply and lay dry river sand filling for under ground cable protection with a layer 8cm deep before laying and 15cm covering above the top edge cable and punning down upto 18cmcomplete all as specified and as directed |
| 67 | Supply and laying with PCC bricks straight 225mm x 100mm x 75mm for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed. |
| 68 | Material and Labour 50mm bore steel tubing light grade ISI marked for protection of cable including necessary joints complete all as specified and as directed. Make : Tata/Jindal/NEZONE. |
| 69 | Supply, laying, jointing and testing 1100 volts grade, XLPE insulated , screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under graound cables, heavy duty with aluminium conductor of cross sectional area 6.0 sqmm 2 core with all fixing and connecting accessories such as aluminum cable lugs, cable gland, nut, bolts, washer etc,laid in trenches or passing through pipe, complete as specified and as directed. Make : POLYCAB/HAVELLS/PLAZA/L&T. |
| 70 | Supply and fix sheet metal enclosure MCB DB 2 way SPN double door suitable for 240 Volts, fixed flused on walls including cutting Knitch and making good disturbed surfacs incl blanking plate as per requirement complete all as specified and as directed. Make : INDOASIAN/Legrand/L&T. |
| 71 | Supply and fixingMCB SPN, 32 Amp, 240 volt,\"C\" curve complete all as specified and as directed. Make :INDOASIAN/ Legrand/ L&T. |
| 72 | Materials and Labour for complete for earthing complete with galvanized mild steel earth plate electrode 600 x 600x 6mm thick buried directly in ground (in vertical position) earth pit not less than 2.25mtr below normal ground level with the top edge of the earth plate not less than 1.5 mtr (B.G.L) and connected to galvanized iron earth strip 25x 6 mm by means of bolts, nuts, check nuts and washer of galvanized iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made of 12mm round bar, including necessary excavation & earth work in any type of soil. 20mm dia med gde galvanized steel tube for watering with one end fixed with cast iron funnel and wire mesh, 40mm dia bore, light grade galvanized steel tubing up to 5 mtr length for drawing earth lead wire protection common salt, charcoal etc complete all as shown in EP No 5 of SSR Part 1 and tesing on completion. |
| 73 | Material and Labour for point wiring for one light/Fan controlled by one way switch with 1.5 sqmm PVC insulated unsheathed sinbgle core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn through and including 20mm dia (medium grade) rigid non metallic PVC concealed conduit alongwith 1.5 sqmm continous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including pressed steel sunken boxes, readily available (Having wall thickness not less than 1.22mm for boxes upto a size of 200mm x300mm and beyond that the wall thickness shall be not less than 1.63mm) concealed type with 3mm thick bakelite sheet cover for mounting switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surface complete all as specified and as directed. (Make of cable : Polycab/ Finolex/ RR Cable/Mescab/Nicco/PLAZA). |
| 74 | All as per item No 79 above but for one 5pin switch socket outlet, 5/6 Amp on same board complete all as specified and as directed. |
| 75 | All as per item No 79 here-in-bofore but for one 15 Amp 3pin switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLS) alongwith 2.5 Sqmm continous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire complete all as specified and as directed. |
| 76 | Supply and fix Switch piano flush button single pole, one way 5Amp, complete all as specified and as directed. Make: ANCHOR (PENTA)/ PLAZA/MARU/ANCHOR/ ROMA HAVELLS |
| 77 | Supply and fixingSocket outlet 5 pin 6 amp flush type complete all as specified and as directed. Make: ANCHOR (PENTA)/ PLAZA/MARU/ANCHOR/ HAVELLS |
| 78 | Supply and fix Switch socket combination 2 in 1,3 pin, 5amps and 15 amps (ISI marked) flush type, universal shuttered, complete all as specified and as directed. Make : ANCHOR (PENTA)/ PLAZA/MARU/ANCHOR/ HAVELLS |
| 79 | Supply and fix Ceiling rose, 3 pole, PVC/polycarbonate, insulated body (ISI marked) all as specified and directed. Make : ANCHOR (PENTA, Colour Ivory)/ PLAZA/MARU/HAVELLS |
| 80 | Supply and fix LED tube light fittingd 1 x 09/10 Watt two feels long basic all purpose surface and eall mounted LED battenwith polycarbonate housing & intigrated electronic driver and necessary electric connection complete all as specified and as directed. Make : Crompton Greaves/ Surya/ Bajaj/ Havells |
| 81 | Material and Labour for metal body exhaust fan of size 300mm sweep, single phase, 230 volts AC with louver shutter /grill and making hole of proper size in existing wall and make good with connection from ceiling rose complete all as specified and as directed. Bajaj/Crompton Greveas/USHA |
| 82 | Supply and fix MCB, SP, AC, 240 volts IP-43 of 06 to 32 Amps capacity \"C\" series and making connections complete all as specified and as directed. Make : INDOASIAN/ Legrand/ L&T. |
AI Tender Summary
Tender Timeline
Nov 25, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedDec 01, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 03, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender