Tender For Supply Of Furnitures For Amrutha Schools Davanagere Dist, davanagere-Karnataka

Supply Of Furnitures For Amrutha Schools Davanagere Dist , Teak Wood Table ( Size3x2 ) : With Teak Wood Beading Made Out Of Teak Wood Leg Size 2X2 Table Upper Side Patti 4 X1.25 Lower Side H Shape Middle 2 Patti With Small Drawer The Table Shall Be Neatly Finished And Polished, Teak Wood Table ( Size3x2 ) : With Teak Wood Beading Made Out Of Teak Wood Leg Size 2X2 Table Upper Side Patti 4 X1.25 Lower Side H Shape Middle 2 Patti With Small Drawer The Table Shall Be Neatly Finished And Polished, Chair With Writing Pad: High Range Steel Frame Seat And Back Cushion With Pu Handle And Book Shelfs, Green Board Made Up Of Good Quality Board Having Size 48 X 96, Bench & Desk For Class Room: Providing Fabricating Delivery And Assembling Bench & Desk Unit Of Size 1800 Mm As Shown In The Drawing With The Flowing Specifications: The Overall Dimensions Should Be Of Size 1800Mm X ( 1800X265x18mm ) 95 Mm X750mm, The Plywood Panel For Desk ( ) 1800X378x18mm ) Seat ( 1800X335x25mm ) And Back ( 1800X265x18mm ) Should Be Made Of Both Side 0.8 Mm Thick Pre Laminated Sheet Confirming To Is 10701:2012 The Edge Should Be Rounded Duly Sealed With 2Mm Thick 18Mm & 25Mm Wide Hot Pressed Pvc ( Poly Vinyl Chloride ) Beading And Fixed To The Understructure Supporting The Ply Wood Sheet With Power Driven 16Mm Screws To The Square Tubes. The Understructure Should Be Made Of 25.0Mm Square Tube 1.6M Thick Powder Coated Erw ( Electrical Resistant Welded ) Frames At Base Which Should Be Welded To The Desk Seat Supports That Are Made Of 1.0Mm Thick Powder Coated 27.5Mm X25.4Mm C Channel Frame Sections ( 3 ) Vertical Frames At Base And Back Of Seat Made Of 25.0 Mm Sq. Tube X 1.6 Mm Thick Powder Coated Erw Tube Should Be Provided With 25Mm Sq. Tube Stiffeners Between Them Fixed Threaded Screws These Frames Legs & Open Ends Should Be Closed With Pvc Cps The Storage Shelf Closed On Three Sides Should Be Made From 0.8Mm Thick Powder Coated M S Sheet Affixed With Self Thread Screws Below The Desktop And The Frame Supporting To The Desk Top Hooks Made From 6.00Mm Da Ms Rods Should Be Provided On Either Side Of The Vertical Frame Of The Desk Fro Hanging Bags / Bottles. All Wooden Panels Shall Be Half Rounded At Corners Steel Used Should Confirm To Is-513 The Legs Shall Be Provided With Pvc Bushes Steel Used Should Undergo Pre Treatment Process As Per Is 3618 1996 All Striatal Steel Fabricated Components Requiring Welding Are Spot Welded And Finished With Epoxy Polyester Powder Coating Dft ( Film Thickness ) Of 45 Microns As Per Is101, Teak Wood Revolving Chair: Chair Upper Construction Seasoned Teak Wood With Melomon Polish Stain Less Steel 5 Caster Wheel Legs Hydraulic Height Adjustment The Chairs Shall Be Neatly Finished And Polished, Teak Wood Table ( Size3x2 ) : With Teak Wood Beading Made Out Of Teak Wood Leg Size 2X2 Table Upper Side Patti 4 X1.25 Lower Side H Shape Middle 2 Patti With Small Drawer The Table Shall Be Neatly Finished And Polished, Teak Wood Officer Table: ( Accounts Officer Table ) Of Size 7X3x30 Made Out Of 2.25X2.25 Teak Wood Legs Table Upper Side Patti 4X1.25 And Lower Side 2X1.25 And 12Mm Commercial Ply With 1Mm Laminate Wherever Visible. Table To Have One Drawer And One Cupboard On Either Side. Along With One Key Board Doors And Drawers To Be Providing With Ss Handles And Good Quality Locks And Channels, Rubber / Jungle Wood Table ( Size3x2 Or 4X2 ) : With Rubber Wood Beading Made Out Of Rubber Wood Leg Size 2X2 Table Upper Side Patti 4X1.25 Lower Side H Shape Middle One Patti The Shall Be Neatly Finished And Polished, Teak Wood Table ( Size3x2 ) : With Teak Wood Beading Made Out Of Teak Wood Leg Size 2X2 Table Upper Side Patti 4 X1.25 Lower Side H Shape Middle 2 Patti With Small Drawer The Table Shall Be Neatly Finished And Polished, Wooden Rack: Teak Wood ) Of Size 6X3 X1.5 Made Out Of Teak Wood Frame Of Section 2.25X2.25 And Supporting Patties Of Thickness 3X1.25 Panel To Be Made Out Of 12Mm Plywood With Veneer On The Outer Side 18Mm Plywood Shelves Will Be Provided Inside Entire Rack To Be Polished Outer Side And Painted Inside Front Teak Wood Beading Rack Shall Be Neatly Finished And Polished, Square / Round Fiber Table ( Junior ) , Student Desk: Of Size 4 Length X 2.5 Height Beach Top 12 Desk Top 15 Using 1X2 Sq Pipe And 20G Book Shelf, 18Mm Brown / Teak Color Novapan Top For Bench And Desk, Teacher Table Without Wheel For Teacher, Size:4Ftx2ft, Teak Wood Table ( Size3x2 ) : With Teak Wood Beading Made Out Of Teak Wood Leg Size 2X2 Table Upper Side Patti 4 X1.25 Lower Side H Shape Middle 2 Patti With Small Drawer The Table Shall Be Neatly Finished And Polished, Teak Wood Table: Of Size7x3 Laminated Top All Patties Below The Top To Be Of 4X1.25 Leg Size 2.25X2.25 One Side 2 ( Or 3 ) Drawers And Another Side 1 Cabinet With Shelf Table 3 Side Closed With Ost Per Laminated Sheet 12Mm Thickness Complete With All Accessories Like 2 Locks And Handles With Polish Table Shall Be Neatly Finished And Polished, Steel Office Table : Of Size 4.5X2.5 Steel Frame With Novapan Or Ply With Sunmica Top With Teak Wood Beading 3 Drawers On One Side Another Side One Cabinet Using 16H Pipe And Box 18G, Steel S-Type Office Chair: Tak Wood Handle. Chair Using 16G Round Pipe And 18G Sheet / Perforated Sheet With Arm, Fiber Chairs Big Size Made Up Of Good Quality Pvc, Student Desk: Of Size 4 Length X 2.5 Height Beach Top 12 Desk Top 15 Using 1X2 Sq Pipe And 20G Book Shelf, 18Mm Brown / Teak Color Novapan Top For Bench And Desk, Green Board Made Up Of Good Quality Having Size 48 X 96, Student Desk: Of Size 4 Length X 2.5 Height Beach Top 12 Desk Top 15 Using 1X2 Sq Pipe And 20G Book Shelf, 18Mm Brown / Teak Color Novapan Top For Bench And Desk, Fiber Chair Small Size ( Junior ) , Teak Wood Table: Of Size7x3 Laminated Top All Patties Below The Top To Be Of 4X1.25 Leg Size 2.25X2.25 One Side 2 ( Or 3 ) Drawers And Another Side 1 Cabinet With Shelf Table 3 Side Closed With Ost Per Laminated Sheet 12Mm Thickness Complete With All Accessories Like 2 Locks And Handles With Polish Table Shall Be Neatly Finished And Polished, Steel Office Table : Of Size 4.5X2.5 Steel Frame With Novapan Or Ply With Sunmica Top With Teak Wood Beading 3 Drawers On One Side Another Side One Cabinet Using 16H Pipe And Box 18G, School Desk, Made Up Of Cr Pipe, Having Main Pipe Gauge Of 16 And Other Subsidiary Pipes Will Be Of 18 Gauge, Size Of The Desk Will Be 6Ft Width And Writing Pad Height Will Be 30 And Seating Height Will Be 18 Height. The Writing Board Will Be Made Up Of 19Mm Pre-Laminated Board Of Century Made., Steel S-Type Office Chair: Teak Wood Handle. Chair Using 16G Round Pipe And 18G Sheet / Perforated Sheet With Arm, Teak Wood Table ( Size3x2 ) : With Teak Wood Beading Made Out Of Teak Wood Leg Size 2X2 Table Upper Side Patti 4 X1.25 Lower Side H Shape Middle 2 Patti With Small Drawer The Table Shall Be Neatly Finished And Polished, Rubber / Jungle Wood Table ( Size3x2 Or 4X2 ) : With Rubber Wood Beading Made Out Of Rubber Wood Leg Size 2X2 Table Upper Side Patti 4X1.25 Lower Side H Sape Middle One Patti The Shall Be Neatly Finished And Polished, Teacher Table With Draws 2X4ft Metal Frame With Wooden Top 18Mm Plpb Board, Background Screen 25 X 12Ft Cloth With Arch Work, Glass Door Almera For Laboratory Use Made Of Cr Sheet Of 22 Gauge Body And 20 Gauge Door With Powder Coating Paint Size: 78X36X20, Steel S-Type Office Chair: Teak Wood Handle. Chair Using 16G Round Pipe And 18G Sheet / Perforated Sheet With Arm, Teak Wood Raton Bottom Chair: ( Seat With Cushion & Back With Teak Wwod Patti ) Leg Size 2X1.5 With Front And Back Legs Of Size 37X2X1.5 Handle Of Size 2X1.5 Chair Side Bars 3X1.1 / 4 Patti. Seat With Cushion Back Taek Wood Pattis Chairs Shall Be Neatly Finished And Polished, Steel Almera, Made Up Of Cr Sheet Of 22 Gauge Body And 20 Gauge Doors, With Powder Coating Paint. Total Size Of Almera Will Be 78 Height X 36 Width X 20 Depth., Teak Wood Revolving Chair: Chair Upper Construction Seasoned Teak Wood With Melon Polish Stain Less Steel 5 Caster Wheel Legs Hydraulic Height Adjustment The Chairs Shall Be Neatly Finished And Polished, Teacher Chairs S Type Metal Chair Round Pipe, High Back, Bench & Desk For Class Roomm: Oroviding Fabricating Delivery And Assembling Bench & Desk Unit Of Size 1800 Mm As Shown In The Drawing With The Floowing Specifications: The Overall Dimensions Should Be Of Size 1800Mm X ( 1800X265x18mm ) 95 Mm X750mm, The Plywood Panel For Desk ( ) 1800X378x18mm ) Seat ( 1800X335x25mm ) And Back ( 1800X265x18mm ) Should Be Made Of Both Side 0.8 Mm Thick Pre Laminated Sheet Confirming To Is 10701:2012 The Edge Should Be Rounded Duly Sealed With 2Mm Thick 18Mm & 25Mm Wide Hot Pressed Pvc ( Poly Vinyl Chloride ) Beading And Fixed To The Understructrue Supporting The Ply Wood Sheet With Power Driven 16Mm Screws To The Square Tubes. The Understructure Should Be Made Of 25.0Mm Square Tube 1.6M Thick Powder Coated Erw ( Electrical Resistant Welded ) Frames At Base Which Should Be Welded To The Desk Seat Supports That Are Made Of 1.0Mm Thick Powder Coated 27.5Mm X25.4Mm C Channel Frame Sections ( 3 ) Vertical Frames At Base And Back Of Seat Made Of 25.0 Mm Sq Tube X 1.6 Mm Thick Powder Coated Erw Tube Should Be Provided With 25Mm Sq Tube Stffeners Between Them Fixed Threaded Screws These Frames Legs & Open Ends Should Be Closed With Pvc Cps The Storage Shelf Closed On Three Sides Should Be Made From 0.8Mm Thick Powder Coated M S Sheet Affixed With Self Thread Screws Below The Desktop And The Frame Supporting To The Desk Top Hooks Made From 6.00Mm Da Ms Rods Should Be Provided On Either Side Of The Vertical Frame Of The Desk Fro Hanging Bags / Bottles. All Wooden Panels Shall Be Half Rounded At Corrners Steel Usde Should Confirm To Is-513 The Legs Shall Be Providid With Pvc Bushes Steel Usde Should Undergo Pre Treatment Process As Per Is 3618 1996 All Struural Steel Fabricated Components Requiring Welding Are Spot Welded And Finished With Epoxy Polyster Powder Coating Dft ( Film Thickness ) Of 45 Microns As Per Is101, Teak Wood Table: Of Size 5X3 Leg Size 2.5X2.5 Table Frame To Be 4X1.25Thick Patties Foot Rest To Be Provided With 2X1.25=2 Nos Table Top To Be Laminated With 1Mm Thick Laminate With Teak Edge Banding Lower Side Middle H- Shape Patti Table Shall Be Neatly Finished And Polished, Teak Wood Chair Seat & Back With Cushion / Rexin : Leg Size 2X1.5 With Front And Back Legs Of Size 38 X 11 / 4 Patties Chair Shall Be Neatly Finished And Polished., Steel S-Type Office Chair: Teak Wood Handle. Chair Using 16G Round Pipe And 18G Sheet / Perforated Sheet With Arm, Steel S-Type Office Chair: Teak Wood Handle. Chair Using 16G Round Pipe And 18G Sheet / Perforated Sheet With Arm, Teak Wood Executive Table: Laminated Top Of Size 6X2.5; Of 6X3 All Patties Below The Top Be Of 4X1.25. Leg Size 2.25X2.25 One Side 2 ( Or 3 ) Drawers And Another Side 1 Cabinet With Shelf Table 3 Side Closed With Ost Pre Laminated Sheet 12Mm Thickness Complete With All Accessories Like 2 Locks And Handles With Plash Table Shall Be Neatly Finished And Polished For Top 6Mm Plain Glass With Diamond Polish, Teak Wood Table ( Size 4X2 Or 4X2.5 ) : With Teak Wood Beading Made Out Of Teak Wood Leg Size 2X2 Table Upper Side Patti 4 X1.25 Lower Side H Shape Middle 2 Patti With Small Drawer The Shall Be Neatly Finished And Polished, Steel Almera Made Up Of Cr Sheet With 22 Gauge And 20 Gauge Doors, With Powder Coating Paint. Total Size Of The Almirah Will Be 78 Height X 36 Width X 20 Depth, Rubber / Jungle Wood Raton Bottom Chair: ( Seat And Back Cushion ) Leg Size 2X1.5 With Front And Back Legs Of Size 37X2 X1.5 Handle Of Size 2X1.5 Chirs Side Bars 3X1.1 / 4 Pattis Chirs Shall Be Neatly Finished And Polishedtable ( Size3x2 Or 4X2 ) : With Rubber Wood Beading Made Out Of Rubber Wood Leg Size 2X2 Table Upper Side Patti 4X1.25 Lower Side H Sape Middle One Patti The Shall Be Neatly Finished And Polished, Teak Wood Table: Of Size 5X3 Leg Size 2.5X2.5 Table Frame To Be 4X1.25Thick Patties Foot Rest To Be Provided With 2X1.25=2 Nos Table Top To Be Laminated With 1Mm Thick Laminate With Teak Edge Banding Lower Side Middle H- Shape Patti Table Shall Be Neatly Finished And Polished, Wooden Rack: Teak Wood ) Of Size 6X3 X1.5 Made Out Of Teak Wood Frame Of Section 2.25X2.25 And Supporting Patties Of Hickness 3X1.25 Panel To Be Made Out Of 12Mm Plywood With Veneer On The Outer Side 18Mm Plywood Shelves Will Be Provided Inside Entire Rack To Be Polished Outer Side And Painted Inside Front Teak Wood Beading Rack Shall Be Neatly Finished And Polished, Hod Office Table Plpb Size: 4.5 X 2.5, Steel Office Table: Of Size 5X2.5 Or 5X3 Stell Frame With Novapn Of Ply With Sunmica Top With Teak Wood Beeding 3 Drawers On Side Another Side One Cabinet Using 16G Pipe And Box 18 Gauge, Glass Door Almera For Laboratory Use Made Up Of Cr Sheet Of 22 Gauge Body And 20 Gauge Doors, With Powder Coating Paint. Total Size Of Almirah Will Be 78 Height And 36 Width X 20 Depth, Steel Almera For Laboratory Use Made Of Cr Sheet Of 22 Gauge Body And 20 Gauge Door With Powder Coating Paint Size: 78X36X20, Cushion Chairs Without Wheel For Teachers, P Type Chair, Teak Wood Table: Of Size 5X3 Leg Size 2.5X2.5 Table Frame To Be 4X1.25Thick Patties Foot Rest To Be Provided With 2X1.25=2 Nos Table Top To Be Laminated With 1Mm Thick Laminate With Teak Edge Banding Lower Side Middle H- Shape Patti Table Shall Be Neatly Finished And Polished, Teak Wood Revolving Chair: Chair Upper Construction Seasoned Teak Wood With Melomon Polish Stain Less Steel 5 Caster Wheel Legs Hydraulic Height Adjustment The Chairs Shall Be Neatly Finished And Polished, Glass Door Almera For Library Use Made Up Of Cr Sheet Of 22 Gauge Body And 20 Gauge Doors, With Powder Coating Paint. Total Size Of Almirah Will Be 78 Height And 36 Width X 20 Depth, Teak Wood Revolving Chair: Chair Upper Construction Seasoned Teak Wood With Melomon Polish Stain Less Steel 5 Caster Wheel Legs Hydraulic Height Adjustment The Chairs Shall Be Neatly Finished And Polished, Rubber / Jungle Wood Raton Bottom Chair: ( Seat And Back Cushion ) Leg Size 2X1.5 With Front And Back Legs Of Size 37X2 X1.5 Handle Of Size 2X1.5 Chirrs Side Bars 3X1.1 / 4 Patties Chirrs Shall Be Neatly Finished And Polished Table ( Size3x2 Or 4X2 ) : With Rubber Wood Beading Made Out Of Rubber Wood Leg Size 2X2 Table Upper Side Patti 4X1.25 Lower Side H Shape Middle One Patti The Shall Be Neatly Finished And Polished, Fiber Chairs Big Size Made Up Of Good Quality Pvc, Bench & Desk For Class Roomm: Oroviding Fabricating Delivery And Assembling Bench & Desk Unit Of Size 1800 Mm As Shown In The Drawing With The Floowing Specifications: The Overall Dimensions Should Be Of Size 1800Mm X ( 1800X265x18mm ) 95 Mm X750mm, The Plywood Panel For Desk ( ) 1800X378x18mm ) Seat ( 1800X335x25mm ) And Back ( 1800X265x18mm ) Should Be Made Of Both Side 0.8 Mm Thick Pre Laminated Sheet Confirming To Is 10701:2012 The Edge Should Be Rounded Duly Sealed With 2Mm Thick 18Mm & 25Mm Wide Hot Pressed Pvc ( Poly Vinyl Chloride ) Beading And Fixed To The Understructrue Supporting The Ply Wood Sheet With Power Driven 16Mm Screws To The Square Tubes. The Understructure Should Be Made Of 25.0Mm Square Tube 1.6M Thick Powder Coated Erw ( Electrical Resistant Welded ) Frames At Base Which Should Be Welded To The Desk Seat Supports That Are Made Of 1.0Mm Thick Powder Coated 27.5Mm X25.4Mm C Channel Frame Sections ( 3 ) Vertical Frames At Base And Back Of Seat Made Of 25.0 Mm Sq Tube X 1.6 Mm Thick Powder Coated Erw Tube Should Be Provided With 25Mm Sq Tube Stffeners Between Them Fixed Threaded Screws These Frames Legs & Open Ends Should Be Closed With Pvc Cps The Storage Shelf Closed On Three Sides Should Be Made From 0.8Mm Thick Powder Coated M S Sheet Affixed With Self Thread Screws Below The Desktop And The Frame Supporting To The Desk Top Hooks Made From 6.00Mm Da Ms Rods Should Be Provided On Either Side Of The Vertical Frame Of The Desk Fro Hanging Bags / Bottles. All Wooden Panels Shall Be Half Rounded At Corrners Steel Usde Should Confirm To Is-513 The Legs Shall Be Providid With Pvc Bushes Steel Usde Should Undergo Pre Treatment Process As Per Is 3618 1996 All Struural Steel Fabricated Components Requiring Welding Are Spot Welded And Finished With Epoxy Polyster Powder Coating Dft ( Film Thickness ) Of 45 Microns As Per Is101

INR 550 /-

INR 71000.0 /-

Refer document

Sl. No.	Item Name
1	Teak Wood Table (Size3x2): With Teak wood Beading Made out of teak wood leg size 2"X2" Table upper side patti 4" X1.25" Lower side H Shape middle 2 patti with small drawer The Table shall be neatly finished and polished
2	Teak Wood Table (Size3x2): With Teak wood Beading Made out of teak wood leg size 2"X2" Table upper side patti 4" X1.25" Lower side H Shape middle 2 patti with small drawer The Table shall be neatly finished and polished
3	Chair With Writing pad: High Range Steel frame seat and back cushion with PU Handle and book shelfs
4	Green board made up of good quality board having size 48" X 96"
5	Bench & Desk for class Room: Providing fabricating delivery and assembling Bench & desk unit of size 1800 mm as shown in the drawing with the flowing specifications: The overall dimensions should be of size 1800mm X (1800X265X18mm) 95 mm X750mm, The Plywood panel for Desk ()1800X378X18mm) seat (1800X335X25mm) and Back (1800X265X18mm) should be made of both side 0.8 mm thick pre Laminated Sheet confirming to IS 10701:2012 The edge should be rounded duly sealed with 2mm thick 18mm & 25mm wide hot pressed PVC (Poly Vinyl Chloride) beading And fixed to the understructure supporting the ply wood Sheet with power driven 16mm screws to the square tubes. The understructure should be made of 25.0mm square tube 1.6m thick powder coated ERW (Electrical Resistant Welded) frames at base which Should be welded to the desk seat supports that are made of 1.0mm thick powder coated 27.5mm X25.4mm C channel frame sections (3) Vertical frames at base and back of seat made of 25.0 mm sq. tube X 1.6 mm thick powder coated ERW tube should be provided with 25mm sq. tube Stiffeners between them fixed threaded screws These frames legs & open ends should be closed with pvc cps The storage shelf closed on three sides should be made from 0.8mm thick powder coated M S sheet affixed with self thread screws below the desktop and the frame supporting to the desk top Hooks made from 6.00mm da MS rods should be provided on either side of the vertical frame of the desk fro hanging bags/ bottles. All wooden panels shall be half rounded at corners Steel used should confirm to IS-513 the legs shall be Provided with PVC bushes Steel used should undergo pre treatment process as per IS 3618 1996 All Striatal Steel fabricated components requiring welding are spot welded and finished with Epoxy polyester powder coating DFT (Film Thickness) of 45 microns as per IS101
6	Teak wood Revolving chair: Chair upper construction seasoned teak wood with melomon polish stain less steel 5 caster wheel legs Hydraulic height adjustment The chairs shall be neatly finished and polished
7	Teak Wood Table (Size3x2): With Teak wood Beading Made out of teak wood leg size 2"X2" Table upper side patti 4" X1.25" Lower side H Shape middle 2 patti with small drawer The Table shall be neatly finished and polished
8	Teak Wood Officer Table: (Accounts Officer Table) of Size 7X3X30" Made out of 2.25"X2.25" Teak Wood legs Table upper side patti 4X1.25" and lower side 2X1.25" and 12mm commercial ply with 1mm laminate wherever visible. Table to have one drawer and one cupboard on either side. Along with one key board Doors and Drawers to be Providing with SS handles and good quality locks and channels
9	Rubber/Jungle Wood Table (Size3X2 or 4X2): With Rubber wood Beading Made out of Rubber wood leg size 2"X2" Table upper side patti 4"X1.25" Lower side H Shape middle one patti The shall be neatly finished and polished
10	Teak Wood Table (Size3x2): With Teak wood Beading Made out of teak wood leg size 2"X2" Table upper side patti 4" X1.25" Lower side H Shape middle 2 patti with small drawer The Table shall be neatly finished and polished
11	Wooden Rack: Teak Wood) Of size 6X3 X1.5 Made out of teak wood frame of section 2.25"X2.25" and supporting patties of thickness 3"X1.25" Panel to be made out of 12mm plywood with veneer on the outer side 18mm plywood shelves will be provided inside Entire rack to be polished outer side and painted inside Front teak wood beading Rack shall be neatly finished and polished
12	Square / round fiber table (junior)
13	Student Desk: Of Size 4 length X 2.5 Height Beach top 12" Desk top 15" using 1"X2" sq Pipe and 20G Book shelf, 18mm Brown/Teak color Novapan top for Bench and Desk
14	Teacher Table without wheel for Teacher, Size:4ftX2ft
15	Teak Wood Table (Size3x2): With Teak wood Beading Made out of teak wood leg size 2"X2" Table upper side patti 4" X1.25" Lower side H Shape middle 2 patti with small drawer The Table shall be neatly finished and polished
16	Teak wood Table: Of size7X3 Laminated Top all patties below the top to be of 4X1.25 Leg size 2.25X2.25 One side 2 (or 3) drawers and another side 1 cabinet with shelf Table 3 side closed with OST per laminated sheet 12mm thickness complete with all accessories like 2 locks and handles with polish Table shall be neatly finished and polished
17	Steel Office Table : of Size 4.5X2.5 Steel frame with Novapan or ply with sunmica top with Teak wood beading 3 Drawers on one side another side one cabinet using 16H Pipe and box 18G
18	Steel S-type Office Chair: Tak Wood handle. Chair using 16g round pipe and 18g Sheet/perforated sheet with Arm
19	Fiber chairs big size made up of good quality PVC
20	Student Desk: Of Size 4 length X 2.5 Height Beach top 12" Desk top 15" using 1"X2" sq Pipe and 20G Book shelf, 18mm Brown/Teak color Novapan top for Bench and Desk
21	Green Board made up of good quality having size 48" x 96"
22	Student Desk: Of Size 4 length X 2.5 Height Beach top 12" Desk top 15" using 1"X2" sq Pipe and 20G Book shelf, 18mm Brown/Teak color Novapan top for Bench and Desk
23	Fiber chair small size (junior)
24	Teak wood Table: Of size7X3 Laminated Top all patties below the top to be of 4X1.25 Leg size 2.25X2.25 One side 2 (or 3) drawers and another side 1 cabinet with shelf Table 3 side closed with OST per laminated sheet 12mm thickness complete with all accessories like 2 locks and handles with polish Table shall be neatly finished and polished
25	Steel Office Table : of Size 4.5X2.5 Steel frame with Novapan or ply with sunmica top with Teak wood beading 3 Drawers on one side another side one cabinet using 16H Pipe and box 18G
26	School Desk, made up of CR pipe, having main pipe gauge of 16 and other subsidiary pipes will be of 18 gauge, size of the desk will be 6ft width and writing pad height will be 30" and seating height will be 18" height. The writing board will be made up of 19mm Pre-laminated board of century made.
27	Steel S-type Office Chair: Teak Wood handle. Chair using 16g round pipe and 18g Sheet/perforated sheet with Arm
28	Teak Wood Table (Size3x2): With Teak wood Beading Made out of teak wood leg size 2"X2" Table upper side Patti 4" X1.25" Lower side H Shape middle 2 patti with small drawer The Table shall be neatly finished and polished
29	Rubber/Jungle Wood Table (Size3X2 or 4X2): With Rubber wood Beading Made out of Rubber wood leg size 2"X2" Table upper side patti 4"X1.25" Lower side H Sape middle one patti The shall be neatly finished and polished
30	Teacher table with draws 2x4ft metal frame with wooden top 18mm PLPB board
31	Background screen 25 x 12ft cloth with arch work
32	Glass door almera for laboratory use made of Cr sheet of 22 gauge body and 20 gauge door with powder coating paint size: 78"x36"x20"
33	Steel S-type Office Chair: Teak Wood handle. Chair using 16g round pipe and 18g Sheet/perforated sheet with Arm
34	Teak wood Raton Bottom Chair: (Seat with cushion & back with teak wwod Patti) leg size 2"X1.5" with front and back legs of size 37"X2"X1.5" Handle of size 2"X1.5" chair side bars 3"X1.1/4" patti. Seat with cushion back taek wood pattis chairs shall be neatly finished and polished
35	steel almera, made up of Cr sheet of 22 gauge body and 20 gauge doors, with powder coating paint. Total size of almera will be 78" height x 36" width x 20" depth.
36	Teak wood Revolving chair: Chair upper construction seasoned teak wood with melon polish stain less steel 5 caster wheel legs Hydraulic height adjustment The chairs shall be neatly finished and polished
37	Teacher chairs s type metal chair round pipe, high back
38	Bench & Desk for class Roomm: Oroviding fabricating delivery and assembling Bench & desk unit of size 1800 mm as shown in the drawing with the floowing specifications: The overall dimensions should be of size 1800mm X (1800X265X18mm) 95 mm X750mm, The Plywood panel for Desk ()1800X378X18mm) seat (1800X335X25mm) and Back (1800X265X18mm) should be made of both side 0.8 mm thick pre Laminated Sheet confirming to IS 10701:2012 The edge should be rounded duly sealed with 2mm thick 18mm & 25mm wide hot pressed PVC (Poly Vinyl Chloride) beading And fixed to the understructrue supporting the ply wood Sheet with power driven 16mm screws to the square tubes. The understructure should be made of 25.0mm square tube 1.6m thick powder coated ERW (Electrical Resistant Welded) frames at base which Should be welded to the desk seat supports that are made of 1.0mm thick powder coated 27.5mm X25.4mm C channel frame sections (3) Vertical frames at base and back of seat made of 25.0 mm sq tube X 1.6 mm thick powder coated ERW tube should be provided with 25mm sq tube Stffeners between them fixed threaded screws These frames legs & open ends should be closed with pvc cps The storage shelf closed on three sides should be made from 0.8mm thick powder coated M S sheet affixed with self thread screws below the desktop and the frame supporting to the desk top Hooks made from 6.00mm da MS rods should be provided on either side of the vertical frame of the desk fro hanging bags/ bottles. All wooden panels shall be half rounded at corrners Steel usde should confirm to IS-513 the legs shall be Providid with PVC bushes Steel usde should undergo pre treatment process as per IS 3618 1996 All Struural Steel fabricated components requiring welding are spot welded and finished with Epoxy polyster powder coating DFT (Film Thickness) of 45 microns as per IS101
39	Teak Wood Table: Of Size 5X3 Leg size 2.5"X2.5" Table frame to be 4"x1.25"thick patties Foot rest to be provided with 2"x1.25"=2 Nos Table top to be laminated with 1mm thick laminate with teak edge banding lower side middle H- Shape Patti Table shall be neatly finished and polished
40	Teak Wood Chair Seat & Back with Cushion /Rexin : Leg size 2"x1.5" with front and back legs of size 38" x 11/4 Patties chair shall be neatly finished and polished.
41	Steel S-type Office Chair: Teak Wood handle. Chair using 16g round pipe and 18g Sheet/perforated sheet with Arm
42	Steel S-type Office Chair: Teak Wood handle. Chair using 16g round pipe and 18g Sheet/perforated sheet with Arm
43	Teak Wood Executive Table: Laminated Top of size 6X2.5; of 6X3 all patties below the top be of 4X1.25". Leg size 2.25"X2.25 One side 2 (or 3) drawers and another side 1 cabinet with shelf Table 3 side closed with OST pre laminated sheet 12mm thickness Complete with all accessories like 2 locks and handles with plash Table shall be neatly finished and polished For top 6mm Plain glass with Diamond polish
44	Teak Wood Table (Size 4X2 or 4X2.5): With Teak Wood Beading Made out of teak wood leg Size 2"X2" Table upper side patti 4 x1.25" Lower side H Shape middle 2 patti with small drawer The Shall be neatly finished and polished
45	Steel almera made up of Cr sheet with 22 gauge and 20 gauge doors, with powder coating paint. Total size of the almirah will be 78" height X 36" width X 20" depth
46	Rubber/Jungle Wood Raton Bottom chair: (Seat and back cushion) leg size 2X1.5 with front and back legs of size 37X2" X1.5" Handle of size 2"X1.5" Chirs side bars 3X1.1/4 pattis Chirs shall be neatly finished and polishedTable (Size3X2 or 4X2): With Rubber wood Beading Made out of Rubber wood leg size 2"X2" Table upper side patti 4"X1.25" Lower side H Sape middle one patti The shall be neatly finished and polished
47	Teak Wood Table: Of Size 5X3 Leg size 2.5"X2.5" Table frame to be 4"x1.25"thick patties Foot rest to be provided with 2"x1.25"=2 Nos Table top to be laminated with 1mm thick laminate with teak edge banding lower side middle H- Shape patti Table shall be neatly finished and polished
48	Wooden Rack: Teak Wood) Of size 6X3 X1.5 Made out of teak wood frame of section 2.25"X2.25" and supporting patties of hickness 3"X1.25" Panel to be made out of 12mm plywood with veneer on the outer side 18mm plywood shelves will be provided inside Entire rack to be polished outer side and painted inside Front teak wood beading Rack shall be neatly finished and polished
49	HOD office table PLPB size: 4.5 x 2.5
50	Steel Office Table: Of Size 5X2.5 or 5X3 Stell Frame with Novapn of Ply with sunmica top with Teak wood beeding 3 Drawers on side another side one cabinet using 16G pipe and box 18 Gauge
51	Glass door almera for laboratory use made up of Cr sheet of 22 gauge body and 20 gauge doors, with powder coating paint. Total size of almirah will be 78" height and 36" width X 20" depth
52	steel almera for laboratory use made of Cr sheet of 22 gauge body and 20 gauge door with powder coating paint size: 78"x36"x20"
53	Cushion chairs without wheel for teachers, P type Chair
54	Teak Wood Table: Of Size 5X3 Leg size 2.5"X2.5" Table frame to be 4"x1.25"thick patties Foot rest to be provided with 2"x1.25"=2 Nos Table top to be laminated with 1mm thick laminate with teak edge banding lower side middle H- Shape patti Table shall be neatly finished and polished
55	Teak wood Revolving chair: Chair upper construction seasoned teak wood with melomon polish stain less steel 5 caster wheel legs Hydraulic height adjustment The chairs shall be neatly finished and polished
56	Glass door almera for library use made up of Cr sheet of 22 gauge body and 20 gauge doors, with powder coating paint. Total size of almirah will be 78" height and 36" width X 20" depth
57	Teak wood Revolving chair: Chair upper construction seasoned teak wood with melomon polish stain less steel 5 caster wheel legs Hydraulic height adjustment The chairs shall be neatly finished and polished
58	Rubber/Jungle Wood Raton Bottom chair: (Seat and back cushion) leg size 2X1.5 with front and back legs of size 37X2" X1.5" Handle of size 2"X1.5" Chirrs side bars 3X1.1/4 patties Chirrs shall be neatly finished and polished Table (Size3X2 or 4X2): With Rubber wood Beading Made out of Rubber wood leg size 2"X2" Table upper side patti 4"X1.25" Lower side H Shape middle one patti The shall be neatly finished and polished
59	Fiber chairs big size made up of good Quality PVC
60	Bench & Desk for class Roomm: Oroviding fabricating delivery and assembling Bench & desk unit of size 1800 mm as shown in the drawing with the floowing specifications: The overall dimensions should be of size 1800mm X (1800X265X18mm) 95 mm X750mm, The Plywood panel for Desk ()1800X378X18mm) seat (1800X335X25mm) and Back (1800X265X18mm) should be made of both side 0.8 mm thick pre Laminated Sheet confirming to IS 10701:2012 The edge should be rounded duly sealed with 2mm thick 18mm & 25mm wide hot pressed PVC (Poly Vinyl Chloride) beading And fixed to the understructrue supporting the ply wood Sheet with power driven 16mm screws to the square tubes. The understructure should be made of 25.0mm square tube 1.6m thick powder coated ERW (Electrical Resistant Welded) frames at base which Should be welded to the desk seat supports that are made of 1.0mm thick powder coated 27.5mm X25.4mm C channel frame sections (3) Vertical frames at base and back of seat made of 25.0 mm sq tube X 1.6 mm thick powder coated ERW tube should be provided with 25mm sq tube Stffeners between them fixed threaded screws These frames legs & open ends should be closed with pvc cps The storage shelf closed on three sides should be made from 0.8mm thick powder coated M S sheet affixed with self thread screws below the desktop and the frame supporting to the desk top Hooks made from 6.00mm da MS rods should be provided on either side of the vertical frame of the desk fro hanging bags/ bottles. All wooden panels shall be half rounded at corrners Steel usde should confirm to IS-513 the legs shall be Providid with PVC bushes Steel usde should undergo pre treatment process as per IS 3618 1996 All Struural Steel fabricated components requiring welding are spot welded and finished with Epoxy polyster powder coating DFT (Film Thickness) of 45 microns as per IS101