Tender For Aluminum Work At Nift Jodhpur, jodhpur-Rajasthan

Tender For Aluminum Work At Nift Jodhpur - Providing And Fixing Aluminum Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminum Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminum Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, As Per The Directions Of Engineer-In-Charge.Powder Coated Aluminum ( Minimum Thickness Of Powder Coating 50 Micron ) 3 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required As Per The Directions Of Estate Engineer.Powder Coated Aluminum ( Minimum Thickness Of Powder Coating 50 Micron ) 4 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete Of Engineer In-Charge.Pre-Laminated Particle Board With Decorative Lamination On Both Sides- 5 Providing And Fixing 4 Mm Thick Acp Sheet With Pasting Grow Silicon Pasting With Pri Laminated Completed As Per Direction Of Engineer In-Charge 6 Providing And Fixing Glazing In Aluminum Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Directions Of Engineer-In-Charge . With Float Glass Panes Of 5 Mm Thickness ( Weight Not Less Than 12.50 Kg / Sqm ) 7 Existing Aluminum Section Material Reuse Dismantling & Fixing Aluminum Section, Including Screw Supporting And Etc. As Per Direction Of Engineer In-Charge.

Refer document

INR 32500.0 /-

Refer document