|
| 1 | Brick Aggregate (single size):40 mm nominal size |
| 2 | Tor Steel Rods/HYSD bars/TMT bars(SAIL/TATA/RINL) (Fe415/Fe500/Fe500D conforms to IS: 1786) |
| 3 | Tor Steel Rods/HYSD bars/TMT bars(JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL)(Fe415/Fe500/Fe500D conforms to IS: 1786) |
| 4 | Tor Steel Rods/HYSD bars/TMT bars (Other than Sail/TATA/RINL/JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL)(Fe415/Fe500/Fe500D conforms to IS: 1786) |
| 5 | 1st class picked Jhama Bricks(Traditional) |
| 6 | 1st Class traditional Bricks (kiln burnt) |
| 7 | G I wire |
| 8 | Portland Cement |
| 9 | Stone Aggregate(single size):63 mm nominal size |
| 10 | Stone Aggregate(single size): 40 mm nominal size |
| 11 | Stone Aggregate(single size):20 mm nominal size |
| 12 | Stone Aggregate(single size): 10 mm nominal size |
| 13 | Fine Sand |
| 14 | Medium Sand |
| 15 | Coarse Sand |
| 16 | Stone Screening Type A (13.2 mm) |
| 17 | Stone Screening Type B (11.2mm) |
| 18 | River bed material |
| 19 | Silver sand |
| 20 | Good earth carrage |
| 21 | Good quality fine sand supply |
| 22 | Stone boulder( 225 mm above ) |
| 23 | Stone boulder ( 225mm-150mm ) |
| 24 | Sausage Wire Net |
| 25 | Fencing Post 215 cm 150 mm X 150 mm section at bottom, 100 mm X 100 mm section at top with T-Base 300 mm X 150 mm X 100 mm, having 4 nos 6 mm dia vertical M.S. reinforcement and 6 mm dia binders @ 200 mm centres, finished smooth |
| 26 | RCC pipe 600 mm dia NP- 3 spigot |
| 27 | RCC pipe 900 mm dia NP - 3 spigot |
| 28 | RCC pipe 1000 mm dia NP -3 spigot |
| 29 | RCC pipe 1200 mm dia NP - 3 spigot |
| 30 | RCC pipe 1800 mm dia NP- 3 spigot |
| 31 | RCC pipe 600 mm dia NP- 4 spigot |
| 32 | RCC pipe 900 mm dia NP- 4 spigot |
| 33 | RCC pipe 1000 mm dia NP- 4 spigot |
| 34 | RCC pipe 1200 mm dia NP- 4 spigot |
| 35 | RCC pipe 1800 mm dia NP- 4 spigot |
| 36 | R.C.C ventilator of 20 mm. thick Upto 0.10 sq.m. area |
| 37 | R.C.C ventilator of 20 mm. thick above 0.10 sq.m. area |
| 38 | Coloured inter locking C.C. paver Block |
| 39 | Udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m |
| 40 | Chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m |
| 41 | Udaypur marble slab ( for Wall/Dado) 18 mm thick of size 0.3 sq m to 0.6 sq m |
| 42 | Chawk dungri marble slab ( for Wall/Dado) 18 mm thick of size 0.3 sq m to 0.6 sq m |
| 43 | 18 mm thick marble partition slab for urinals including fitting fixing (with Chawk Doongri marble) |
| 44 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
| 45 | Hire charges of Diesel Road Roller- 8 to 10 tonne |
| 46 | Hire charges of Pump set of capacity 4000 litres/hour |
| 47 | Vibrator (Needle type 40 mm) |
| 48 | pin vibrator |
| 49 | Surface Vibrator |
| 50 | Generator 250 KVA |
| 51 | Water tanker 5000 Ltr. Capacity |
| 52 | Bamboo |
| 53 | Water Tanker 5 to 6 KL Capacity |
| 54 | Generator 250 KVA |
| 55 | Generator 100 KVA/125 |
| 56 | Hire charges for 5 HP with operator,fuel and shifting etc all charges complete |
| 57 | Bamboo (8cm-10cm dia) including fixing |
| 58 | Eucalyptus Bullah (7.5cm -10cm dia) |
| 59 | Eucalyptus Bullah (12.5cm -15cm dia) |
| 60 | Eucalyptus Bullah (17.5cm -20cm dia) |
| 61 | Sal Bullah (7.5cm -10cm dia) |
| 62 | Sal Bullah (12.5cm -15cm dia) |
| 63 | Sal Bullah (17.5cm -20cm dia) |
| 64 | Empty Gunny Bag |
| 65 | Hire charges of Shuttering plank (25mm-30mm thick) with Prop including all fittings |
| 66 | Hire charges of Shuttering plank (25mm-30mm thick) without Prop including all fittings |
| 67 | Hire charges of Shuttering plank (above 30mm-37mm thick) with Prop including all fittings |
| 68 | Sal Silliguri |
| 69 | Sal Malaysia |
| 70 | Neem wood |
| 71 | Other Local Wood |
| 72 | Ordinary Teak wood |
| 73 | Sisu/Gamar wood |
| 74 | Local Sal Wood |
| 75 | C.I. Grating 100x100 mm |
| 76 | Mirror of superior make glass 60x45 cm |
| 77 | vitreous china pedestal for wash basin |
| 78 | Slotted cowl (terminal guard) 75 mm dia |
| 79 | Slotted cowl (terminal guard) 100 mm dia |
| 80 | White plastic seat (solid) with lid C.P. brass hinges and rubber buffers |
| 81 | Shower rose C.P brass for 15 to 20 mm intel 100 mm dia |
| 82 | Shower rose C.P.brass for 15 to 20 mm intel 150 mm dia |
| 83 | Vitreous china squatting plate urinal |
| 84 | H.P. or L.P. ball valve with polythene floats: 15 mm dia |
| 85 | H.P. or L.P. ball valve with polythene floats: 20 mm dia |
| 86 | H.P. or L.P. ball valve with polythene floats: 25 mm dia |
| 87 | Vitreous China flat back wash basin 630x450 mm |
| 88 | Vitreous china angle back wash basin 400x400 mm |
| 89 | Vitreous china flat back wash basin 550x400 mm |
| 90 | Vitreous china flat back wash basin 450x300 mm |
| 91 | Oxidised M.S. casement stay (straight peg type) 300 mm not less than 0.33 kg |
| 92 | Coloured Orissa pattern W.C. pan 580x440 mm |
| 93 | Coloured Pedestal type W.C. pan 580x440 mm (European type) |
| 94 | Circular shape 450 mm dia precast R.C.C. manhole cover with frame L.D. -25 |
| 95 | uPVC pipes (working pressure 4 kg/cm 2) Rubber(seal) Ring 75 mm dia |
| 96 | uPVC single equal Tee (without door) 75x75x75 mm |
| 97 | uPVC single equal Tee (without door) 110x110x110 mm |
| 98 | uPVC single equal Tee (with door) 75x75x75 mm |
| 99 | uPVC single equal Tee (with door) 110x110x110 mmmm |
| 100 | uPVC bend 87.50, 75 mm bend |
| 101 | UPVCbend 87.50, 110 mm bend |
| 102 | C.P.Brass bibcock 15 mm |
| 103 | C.P. Brass long body bibcock 15 mm |
| 104 | C.P. Brass stop cock (concealed) 15 mm |
| 105 | Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessoriesand flush pipe) |
| 106 | White vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per IS: 2556 |
| 107 | 15 mm PTMT bib cock |
| 108 | PTMT pillar cock |
| 109 | PTMT push cock 15 mm dia |
| 110 | PTMT - Liquid Soap Container of 400 ml capacity |
| 111 | 32 MM dia polythene flush pipe |
| 112 | Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 113 | Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). |
| 114 | Polythene Bib Cock / Stop Cock (HD) with metal/plasticinlet (EMCO / ATLAS or equivalent) |
| 115 | Sink 630 mm X 550 mm X 180 mm with waste fittings and two coats of painting of C.I. brackets |
| 116 | Supplying, fitting and fixing pillar cock of approved make CP Pillar Cock - 15 mm equivalent to Code No. 507 & Model Tropical / Sumthing Special of ESSCO or similar brand. |
| 117 | 15 mm swan neck tap with left & right hand operating nob with aerator (Equivalent to Code No. 510, 510(A) and Model - TROPICAL / SUMTHING SPECIAL of ESSCO or similar brand). |
| 118 | P.V.C. CONNECTOR 15 mm dia 600 mm long |
| 119 | Polythene waste fittings complete 32mm |
| 120 | Waste pipe, with PVC coupling at one end fitted with necessary clamps 900 mm long |
| 121 | Towel rail (CP over brass )- 600 mm |
| 122 | Two point nose steel handle |
| 123 | C.P. over brass Waste fittings 32 mm |
| 124 | UPVC Plain Y 110 mm dia |
| 125 | Shower jet |
| 126 | Corner Urinal |
| 127 | Check valve 32mm |
| 128 | Check valve 40mm |
| 129 | Check valve 50mm |
| 130 | Reducing socket 20mm x 15mm |
| 131 | Reducing socket 25mm x 20mm |
| 132 | Reducing socket 25mm x 15mm |
| 133 | Reducing Elbow 25 mm x 20 mm |
| 134 | Adhesive solvent cement |
| 135 | G.I. pipes 15 mm dia |
| 136 | G.I. pipes 20 mm dia |
| 137 | G.I. pipes 25 mm dia |
| 138 | G.I. pipes 32 mm dia |
| 139 | G.I. pipes 40 mm dia |
| 140 | G.I pipes 50 mm dia |
| 141 | G.I. pipes 65 mm dia |
| 142 | G.I. pipes 80 mm dia |
| 143 | uPVC pipes (working pressure 4 kg /cm2 ) Single socketed pipe 75 mm dia |
| 144 | uPVC pipes (working pressure 4 Kg / cm2 ) Single socketed pipe 110 mm dia |
| 145 | Chlorinated Polyvinyl - Chloride (CPVC) pipe 15 mm outer dia |
| 146 | Chlorinated Polyvinyl - Chloride (CPVC) pipe 20 mm outer dia |
| 147 | Chlorinated Polyvinyl - Chloride (CPVC) pipe 25 mm outer dia |
| 148 | Chlorinated Polyvinyl - chloride (CPVC) pipe 32 mm outer dia |
| 149 | Chlorinated Polyvinyl - chloride (CPVC) pipe 40 mm outer dia |
| 150 | Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm outer dia |
| 151 | Coloured Pedestal type W.C. pan 580x440 mm (European type) S Trap |
| 152 | GI pipe 32 mm dia medium quality for UNDERGROUND WORKS |
| 153 | GI pipe 40 mm dia medium quality for UNDERGROUND WORKS |
| 154 | CPVC (Chlorinated Polyvinyl Chloride) pipes (15 mm dia) [For Concealed Work] |
| 155 | CPVC (Chlorinated Polyvinyl Chloride) pipes (20 mm dia) [For Concealed Work] |
| 156 | CPVC (Chlorinated Polyvinyl Chloride) pipes (25 mm dia) [For Concealed Work] |
| 157 | UPVC Plain Y 75 mm dia |
| 158 | Vitreous china foot rests 250x125x25 mm |
| 159 | Polyethylene water storage tank with cover and suitable locking arrangemnet |
| 160 | Nail |
| 161 | Polythene sheet (150 gm per sqm) |
| 162 | Jute rope |
| 163 | Coconut rope |
| 164 | Poly rope |
| 165 | Glue |
| 166 | Green or blue medium shade pigment |
| 167 | Coal Tar |
| 168 | Synthetic enamel paint, having VOC ( Volatile Organic Compound content less than 150 gm/liitre |
| 169 | Ready mixed pink or grey primer on wood work(hard and softwood)having VOC content less than 50 gms/litre |
| 170 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre |
| 171 | Black Japan |
| 172 | Synthetic enamel paint in black or chocolate shade |
| 173 | Superior copal varnish |
| 174 | Red oxide Zinc chromate primer |
| 175 | Acrylic exterior paint |
| 176 | Bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm |
| 177 | Bright finished or black enameled mild steel butt hinges 75x47x 1.70 mm |
| 178 | Bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm |
| 179 | Fan Hook |
| 180 | Unslaked lime |
| 181 | Coal Tarring |
| 182 | Thermocol 12.5 mm thick. |
| 183 | Fixed type ventilators as per I.S. sizes with horizontal glazing bars height being limited to 580 mm |
| 184 | fitting and fixing glass reinforced polyester translucent fiber glass sheet |
| 185 | Supplying solid flush type doors of commercial quality |
| 186 | MS Integrated grill for steel window and ventillator |
| 187 | Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window |
| 188 | Supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf Aluminium swing door |
| 189 | Supplying, fitting & fixing of Aluminium fixed partition wall of all aluminium sections |
| 190 | FRP composite door frame 66mm x 70mm |
| 191 | FRP composite door frame 66mm x 90mm |
| 192 | Supplying, fitting & fixingAsbestos ridging |
| 193 | Supplying, fitting & fixingAluminium sheet ridging |
| 194 | fitting and fixing glass reinforced polyester translucent ridging |
| 195 | Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. |
| 196 | Rolling shutter made of 80x1.25 mm machine rolled laths |
| 197 | Wire mesh (rabbit) |
| 198 | Collapsible gate |
| 199 | 1.5 mm thick ms sheet |
| 200 | Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. |
| 201 | top hung side hung ventillator |
| 202 | False ceiling(with 4mm thick Pearl Designer Fibre Cement Board) |
| 203 | Supplying, fitting & fixingAsbestos corrugatedsheet(6 mm thick) |
| 204 | Supplying, fitting & fixing Zn-Al alloy steel sheet work In Roof |
| 205 | fitting & fixing circular corrugated Aluminium sheet |
| 206 | M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 (trusses spanning up to 12.00 m) |
| 207 | M.S. structural with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998)Span up to 12 Mtr |
| 208 | Display Board ( IBS) as per specificatrion |
| 209 | Display Board ( Community) as per specificatrion |
