Tender For Construction Of Blood Component Separation Unit At Unakoti District Hospital Premises, Bhagabannagar, Kailashahar, Unakoti Tripura.
Tender Value
24.98 Lakhs
Estimated cost
Bid Submission
02 Dec 2022
0 days left
EMD
49960
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kailashahar → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Blood Component Separation Unit At Unakoti District Hospital Premises, Bhagabannagar, Kailashahar, Unakoti Tripura.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. -All kinds of soil |
| 2 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level: 1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burnt brick aggregate 40 mm nominal size) |
| 4 | Filling available excavated earth (excluding rock) in trenches plinth sidesof foundation etc. in layer not exceeding 20 cm.in depth consolidating each deposited layer by ramming and watering lead upto 50 m. and lift upto 1.5 m.(a) All kinds of soil. |
| 5 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement--All work upto plinth level:1:1½:3(1 Cement: 1½ fine sand: 3 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Centering shuttering including struttings, propping etc. and removal of form work for:Foundations, footings, bases for columns etc. for mass concrete with timber plank |
| 9 | Centering shuttering including struttings, propping etc. and removal of form work for:Lintels,beams,plinth beams,girders,bressumers and cantilevers with shuttering ply |
| 10 | Centering shuttering including struttings, propping etc. and removal of form work for:Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply |
| 11 | Reinforcement for R.C.C.work including straightening, cutting, bending, placing in position and binding all complete uptoplinth level.Thermo-MechanicallyTreated bars of grade Fe-500 D or more |
| 12 | Reinforcement for R.C.C.work including straightening, cutting ,bending, placing in position and binding all complete above plinth level.Thermo-MechanicallyTreated bars of grade Fe-500 D or more |
| 13 | Firstclassbrickworkinfoundationandplinth including cost of all materials as required complete:-In cement mortar 1:6 ( 1 cement : 6 fine sand ). |
| 14 | First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:-In cement mortar 1:6 ( 1 cement : 6 fine sand ) |
| 15 | Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 16 | Halfbrickmasonryworkwithfirstclassbricksin superstructure upto floor five level including cost of all materials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 17 | Makingplinthprotection 50mmthickofcement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burntbrickaggregate20mmnominalsize)over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 18 | 12 mm cement plaster of mixIn cement mortar 1 : 6 ( 1 cement : 6 fine sand ) |
| 19 | Neat cement punning. |
| 20 | 6 mm cement plaster in single layer including cost of materials required and finishing even and smooth and curing complete.(a) In cement morter 1:3(1 cement : 3 find sand) |
| 21 | Providing and fixing aluminium work for doors , windows, ventilators and partitions with extruded built up standard tubular sections /appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fastener so frequired dia and size, including necessary filling up of gaps at junctions , i.e.attop,bottom and sides with required EPDM rubber /neoprene gasket etc . Aluminium sections shall be smooth,rustfree,straight,mitred andjointed mechanically wherever required including cleatangle ,aluminium snapbeading forglazing/paneling ,C.P.brass/stainless steel screws,all complete as per architectural drawing and the direction of Engineerincharge.(Glazing and paneling and dash fasteners to be paid for separately) :-For fixed portion of approved quality:-Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868,Minimum anodic coating of grade AC 15). |
| 22 | For shutters of doors ,windows & ventilators including providing and fixing hinges /pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately ):- |
| 23 | Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :-With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm ) |
| 24 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embrossed on the body / plate with double spring mechanism and door weight upto 125 kg. for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece MS sheet outer box with slide plate etc. complete as per direction of the Engineer-in-charge:-With CP brass cover plate minimum 1.25 mm thickness |
| 25 | Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. of approved quality complete as per direction of Engineer-in-charge:-Anodised aluminium of grade AC 15 ). |
| 26 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4kg/cm2) conforming to IS:13592 TypeA including jointing with seal ring conforming to IS:5382 leaving10mmgapforthermalexpansion:Single socketed pipe - 110 mm OD |
| 27 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised-PVC pipesby meansof50x50x50mmhard woodplugs,screwed withM.S.screwsofrequiredlengthincluding cutting brick work andfixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc.complete110mm |
| 28 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :New work (two or more coats) over and including water thinnable priming coat with cement primer. |
| 29 | Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :New work (two or more coats applied @1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 30 | Painting with synthetic enamel paint ( two or more coats ) of required colour of approved brand and manufacture on new work to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer] |
| 31 | Providing and fixing 1st quality ceramic glazed wall tiles (minimum 200x300) conforming to IS:15622-2017 (thickness to be specified by the manufacturer) of approved make in all colours,shades of any size as approved by Engineer-in-charge in skirting,risers of steps and dados, laid over12 mm thick bed of cement mortar 1:3 (1 cement:3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. |
| 32 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 - 2017, of approved make, in all colours and shades, laid over 20mm thick cement mortar 1:4 (1cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Double charged Stainfree vitrified tilesSize of tile 60x60 cm |
| 33 | Providing and fixing Marble stone in floors over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with of matching shade, including rubbing and polishing complete.18 mm thick Marble stoneRaj Nagar plain marble |
| 34 | Providing and fixing M.S . Grills of required pattern in frames of windows etc.with M.S.flats,square or round bars etc. all complete.Fixed to steel windows by welding. |
| 35 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm at 100 mm centre to centre and braced with flat iron diagonals 20x5mm sizewith top and bottom rail of T-iron 40x40x6mm with 40mm dia. steel pulleys & with riveted bolts, nuts, locking arrangement, stoppers, handles, hold fast /anchor bolt including embedding in cement concrete of required grade for fixing in position, all necessaryfittings, including applying a priming coat of approved steel primer etc. complete as required. |
| 36 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and makinggood the wall wherever required :Size 600x450x200mm |
| 37 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 38 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings completeFlexible pipe32 mm dia |
| 39 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved qualityand colour600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. |
| 40 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15mm nominal bore. |
AI Tender Summary
Tender Timeline
Nov 25, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedDec 02, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 02, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender