Tender For Construction Of Science Lab, Physics Lab And Library (Senior Secondary Level) At Pratyekroy H.S. School Under R.D. Kalacherra Sub Division During The Year 2022-23.
Tender Value
60.24 Lakhs
Estimated cost
Bid Submission
09 Dec 2022
0 days left
EMD
1.20 Lakhs
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
North Tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Science Lab, Physics Lab And Library ( Senior Secondary Level ) At Pratyekroy H.S. School Under R.D. Kalacherra Sub Division During The Year 2022-23. Construction Work
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulicexcavator) / manual means in foundation trenches ordrains (not exceeding 1.5 m in width or 10 sqm on plan)including dressing of sides and ramming of bottoms, liftupto 1.5 m, including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a leadof 50 m.-All kinds of soil |
| 2 | Filling available excavated earth (excluding rock) intrenches, plinth, sides of foundations etc. in layers notexceeding 20cm in depth, consolidating each depositedlayer by ramming and watering, lead up to 50 m and liftupto 1.5 m.-All kinds of soil |
| 3 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts includingspreading in horizontal layers, watering, grading torequired slope, ramming, consolidating and compactingeach layer by using plate compactor or by any suitablemethod complete. |
| 4 | 4.1 Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --All work upto plinth level:4.1.15 1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burntbrick aggregate 40 mm nominal size) |
| 5 | 4.12 Extra for providing and mixing water proofingmaterial in cement concrete work in doses by weightof cement as per manufacturer\"s specification |
| 6 | Making plinth protection 50mm thick of cementconcrete 1:3:6 (1 cement : 3 fine sand : 6 graded wellburnt brick aggregate 20 mm nominal size) over75mm bed of dry brick ballast 40mm nominal sizewell rammed and consolidated and grouted with finesand including finishing the top smooth. |
| 7 | Providing and laying in position specified grade ofreinforced cement concrete excluding the cost ofcentring, shuttering, finishing and reinforcement--All work upto plinth level:5.1.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stoneaggregate 20 mm nominal size) |
| 8 | Reinforced cement concrete work in walls (anythickness), including attached pilasters, buttresses,plinth and skirting courses, fillets, columns, pillars,piers, abutments, posts and struts etc. upto floor fivelevel excluding cost of centring, shuttering, finishingand reinforcement 5.2.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stoneaggregate 20 mm nominal size) |
| 9 | Reinforced cement concrete work in beams, suspendedfloors, roofs having slope upto 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases upto floor five levelexcluding the cost of centring, shuttering, finishingand reinforcement 5.3.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stoneaggregate 20 mm nominal size) |
| 10 | Centering shuttering including struttings, propping etc.and removal of form work for:5.8.1.1 Foundations, footings, bases for columns etc. for mass concrete with timber plank |
| 11 | Centering shuttering including struttings, propping etc.and removal of form work for:5.8.6.1 Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply |
| 12 | Centering shuttering including struttings, propping etc.and removal of form work for:5.8.5.1 Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply |
| 13 | Centering shuttering including struttings, propping etc.and removal of form work for:5.8.4.2 Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply |
| 14 | 5.8.12.1 Edges of slabs and breaks in floors and walls under 20 cm. wide |
| 15 | 5.8.13 Weather shade, Chajjas, corbels etc., including edges. |
| 16 | Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding allcomplete upto plinth level.5.19.4 Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 17 | 5.18 Providing precast cement concrete Jali 1:2:4 (1 cement:2 coarse sand : 4 graded stone aggregate 6mm nominalsize) reinforced with 1.6 mm dia mild steel wireincluding centring and shuttering, rougheningcleaning, fixing and finishing in cement mortar1:3(1cement : 3 fine sand) etc. complete, excluding theplastering of jambs, sills and soffits5.18.2 40 mm thick |
| 18 | First class brick work in foundation and plinthincluding cost of all materials as required complete:-6.1.5 In cement mortar 1:6 ( 1 cement : 6 fine sand ). |
| 19 | 6.29 Providing and laying autoclaved aerated cementblocks masonry with 150mm/230mm/300 mm thickAAC blocks in super structure above plinth level up tofloor V level with RCC band at sill level and lintel levelwith approved block laying polymer modifiedadhesive mortar all complete as per direction ofEngineer-in-Charge. (The payment of RCC band andreinforcement shall be made for seperately). |
| 20 | 6.10 Half brick masonry work with first class bricks infoundation and plinth including cost of all materials asrequired complete:-6.10.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 21 | 8.1 Providing wood work in frames of doors, windows,clerestory windows and other frames, wroughtframed and fixed in position :8.1.3 Local Teak Wood |
| 22 | 8.17 Providing and fixing 25 mm thick shutters forcupboards etc. including ISl marked black enamelledM.S. butt hinges with necessary screws :8.17.1 Panelled or panelled and glazed shutters8.17.1.1 Gamair Wood |
| 23 | 8.5 Providing and fixing panelled / or panelled andglazed shutters for doors, windows and clerestorywindows including ISI marked bright finished /black enamelled M.S butt hinges with necessaryscrews excluding panelling and or glazing, whichwill be paid for separately but including the woodenbeading of 20 × 12 mm for fixing panelling and orglazing as per direction of Engineer-In-Charge.8.5.1 Local Teak wood8.5.1.1 35 mm thick shutters |
| 24 | 8.51 Providing 40 × 5 mm flat iron hold fast 40 cm longincluding fixing to frame with 10 mm diameter bolts,nuts and wooden plugs and embedding in cementconcrete block 30 × 10 × 15 cm 1:3:6 mix |
| 25 | 8.94 Providing and fixing aluminium sliding door bolts ISImarked anodised (anodic coating not less than gradeAC 10 as per IS : 1868) transparent or dyed torequired colour or shade with nuts and screws etc.complete :8.94.1 300x16 mm |
| 26 | 8.95 Providing and fixing aluminium tower bolts ISImarked anodised (anodic coating not less than gradeAC 10 as per IS : 1868 ) transparent or dyed torequired colour or shade with necessary screws etc.complete :8.95.1 300x10 mm |
| 27 | 8.98 Providing and fixing aluminium handles ISI markedanodised (anodic coating not less than grade AC 10as per IS : 1868) transparent or dyed to requiredcolour or shade with necessary screws etc. complete :8.98.1 125 mm |
| 28 | 8.99 Providing and fixing aluminium hanging floor doorstopper ISI marked anodised (anodic coating not lessthan grade AC 10 as per IS : 1868) transparent ordyed to required colour and shade with necessaryscrews etc. complete.8.99.1 Single rubber stopper |
| 29 | 8.46 Providing and fixing M.S. grills of required pattern inframes of windows etc. with M.S. flats, square orround bars etc. all complete.8.46.2 Fixed to openings /wooden frames with rawl plugsscrews etc. |
| 30 | 16.1.2 For shutters of doors, windows & ventilators includingproviding and fixing hinges / pivots and makingprovision for fixing fittings wherever required includingthe cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately ):-16.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodiccoating of grade AC 15). |
| 31 | 16.3 Providing and fixing glazing of approved quality inaluminium doors, windows, ventilator, shutters andpartition etc. with EPDM rubber / neoprene gasket etc.complete as per architectural drawing and the directionof Engineer-in-charge (Cost of snap beading shall be paidin basic item) :-16.3.1 With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm ) |
| 32 | 16.10 Providing and fixing stainless steel ( SS 304 grade )adjustable friction window stay of approved quality withnecessary stainless steel screws etc. to the side hungwindows etc. complete as per direction of Engineer-in charge:-16.10.1 205 x 19 mm |
| 33 | 9.3 Providing and fixing in position collapsible steel shutterswith vertical channels 20x10x2mm at 100 mm centre tocentre and braced with flat iron diagonals 20x5mm sizewith top and bottom rail of T-iron 40x40x6mm with40mm dia. steel pulleys & with riveted bolts, nuts,locking arrangement, stoppers, handles, hold fast/anchor bolt including embedding in cement concrete ofrequired grade for fixing in position, all necessaryfittings, including applying a priming coat of approvedsteel primer etc. complete as required. |
| 34 | 9.22 Providing and fixing stainless steel (Grade 304) railingmade of Hollow tubes, channels, plates etc., includingwelding, grinding, buffing, polishing and makingcurvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete,including fixing the railing with necessary accessories &stainless steel dash fasteners , stainless steel bolts etc., ofrequired size, on the top of the floor or the side of waistslab with suitable arrangement as per approval ofEngineer-in-charge, (for payment purpose only weight ofstainless steel members shall be considered excludingfixing accessories such as nuts, bolts, fasteners etc.). |
| 35 | 9.13 Providing and fixing fan clamp type-I of 16 mm dia M.S.bar bent to shape with hooked ends in R.C.C. slabsduring laying including painting the exposed portion ofloop, all as per standard design complete. |
| 36 | 17.14 Grading roof for water proofing treatment complete asrequired as per direction of the Engineer-in-charge with :17.14.1 Cement concrete 1:2:4 (1 cement : 2 fine sand : 4 gradedstone aggregate 20 mm nominal size) |
| 37 | 10.6 Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate) flooringfinished with a floating coat of neat cement includingcement slurry, rounding of edges and strips and cost ofglass strips etc. complete.10.6.1 40mm thick. |
| 38 | 10.9 Providing and laying cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded well burnt brick aggregate) flooringfinished with a floating coat of neat cement includingcement slurry, rounding of edges and strips etc.complete.10.9.1 25 mm thick with 12.5 mm well burnt brick aggregate |
| 39 | 10.13 Providing and laying cement plaster skirting upto 300mm height with cement mortar 1 : 3 ( 1 cement : 3 finesand ) finished with a floating coat of neat cementincluding rounding of junctions etc. complete.10.13.1 18 mm thick |
| 40 | 10.42 Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) withwater absorption less than 0.08% and conforming to IS:15622 - 2017, of approved make, in all colours andshades, laid over 20mm thick cement mortar 1:4 (1cement : 4 fine sand), jointing with grey cement slurry @3.3 kg/ sqm including grouting the joints with whitecement and matching pigments etc., complete.10.42.2 Double charged Stainfree vitrified tiles10.42.2.1 Size of tile 60x60 cm |
| 41 | 10.39 Providing and laying ceramic floor tiles in different sizes (thickness to be specified by the manufacturer) of 1stquality conforming to IS : 15622 - 2017 of approvedmake in colours such as White, Ivory, Grey, Fume RedBrown, laid over 20 mm thick cement mortar 1:4 (1cement : 4 fine sand), Jointing with grey cement slurry @3.3 kg/sqm including pointing the joints with whitecement and matching pigment etc. complete10.39.1 Anti-Skid Tiles10.39.1.1 Ceramic Tiles 1st quality 300 x 300mm in all shades and designs |
| 42 | 10.38 Providing and fixing 1st quality ceramic glazed wall tiles (minimum 200 x 300) conforming to IS : 15622 - 2017(thickness to be specified by the manufacturer) ofapproved make in all colours, shades of any size asapproved by Engineer-in-charge in skirting, risers ofsteps and dados, laid over 12 mm thick bed of cementmortar 1 : 3 (1 cement : 3 fine sand) jointed withordinary cement slurry including pointing with whitecement mixed with pigment of matching shade complete. |
| 43 | 10.55 Providing and fixing precast chequered cement concretetiles 18 mm thick, laid in footpath & courtyard, on 20mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 finesand ) jointed with neat cement slurry including rubbingand cleaning complete as per direction of the Engineer-in Charge. |
| 44 | 12.4 6 mm cement plaster of mix :12.4.1 Cement mortar 1:3 (1 cement : 3 fine sand) |
| 45 | 12 mm cement plaster of mix12.1.4 Cement mortar 1:6 (1 cement : 6 fine sand) |
| 46 | 12.47 Painting with synthetic enamel paint of approved brandand manufacture to give an even shade [Payment shallbe made after submission of Test Certificate issued bythe Manufacturer]: 12.47.1 Two or more coats on new work |
| 47 | 12.1 12 mm cement plaster of mix12.1.2 Cement mortar 1:4 (1 cement : 4 fine sand) |
| 48 | Neat cement punning |
| 49 | Distempering with oil bound washable distemper ofapproved brand and manufacture to give an even shade[Payment shall be made after submission of TestCertificate issued by the Manufacturer] :12.24.1 New work ( two or more coats) over and including water thinnable priming coat with cement primer. |
| 50 | 12.31 Finishing walls with premium acrylic smooth exteriorpaint with Silicon additives of required shade ofapproved brand and manufacture [Payment shall bemade after submission of Test Certificate issued by theManufacturer] :12.31.1 New work ( two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primerapplied @ 2.20 kg/10 sqm) |
| 51 | 12.33 Applying priming coat [Payment shall be made aftersubmission of Test Certificate issued by theManufacturer] :12.33.1 With ready mixed Pink or Grey primer of approved brand and manufacture on wood work ( hard & soft wood ). |
| 52 | Supplying and fitting fixing of Green Chalk board of size 1200x2400 mm as per specification (NON SCHEDULE). |
| 53 | Armless chair, color varnish CALO-002 |
| 54 | Reading table (3\"x2\") color varnish TO-32-002 |
| 55 | Half Secretariat table with drawer channel THS-002 |
| 56 | Notice board (5\"x4\") 4 mm glass perforated sheet NOTB-003 |
AI Tender Summary
Tender Timeline
Nov 25, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedDec 09, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 09, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender