Annual Plan-Karalam Gramapanchayth -Kozhikunnu Dws-Providing Motor Pumpset-General Electrical Work
Tender Value
1.38 Lakhs
Estimated cost
Bid Submission
30 Nov 2022
0 days left
EMD
3475
Bank guarantee accepted
Document Fee
555
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
irinjalakuda → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Plan-Karalam Gramapanchayth -Kozhikunnu Dws-Providing Motor Pumpset-General Electrical Work
BOQ
| Sl. No. | Item Description |
| 1 | Electrical work |
| 2 | OD271353/2022-2023:Supply of 3 phase 5 hp, 3.7 KW, Vertical open well submersible motor pumpset capable to discharge 600 LPM of clear water to a head of 33 mtrs, suitable to work with 415V, 50Hz, AC supply. (Deccan5DT/ Texmo/Kirlosker) |
| 3 | OD271354/2022-2023: Supply of Submersible pump controller with ammeter, volt meter, SSP for 3 phase 5 hp submersible motor pump set. ( L&T MU-G10 DOL suitable for 5 HP ). |
| 4 | 90.17.8.5:Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. andfixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two ormore coats of synthetic enamel paint of required shade complete as required :65 mm |
| 5 | 90.17.14.3:Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :65mm dia |
| 6 | OD272299/2022-2023: Supply and providingadaptor suitable for 65 mm inner dia( 2.5") heavy duty (Red) coloumpipe as required |
| 7 | OD272300/2022-2023: Supply and providing65 mm inner dia( 2.5") heavy duty (Red) coloumpipe as delivery pipe |
| 8 | OD271362/2022-2023:Supply and providing 16 mm size nylon marine rope (garwar/equivlent mkae) for hanging the pump set in well, tying with an out side object as required. |
| 9 | OD271363/2022-2023:Charges for the installation of above 5 hp 3 phase submersible pump set into the well after connecting the delivery pipes, with accessories and lead cables to motor and hanging the unit with nylon rope to 9 mtrs depth complete in trouble free operation and conducting trial run satisfactorly. |
| 10 | 90.17.7.7:Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :100 mm dia |
| 11 | 90.6.10.2:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm |
| 12 | 90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board |
| 13 | 90.14.1.1:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br>Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 2.00mm CRCA sheet, powder coated (excluding base frame) |
| 14 | 90.14.2.2:Supply and providing 3mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc. |
| 15 | 90.14.3.1:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet |
| 16 | 2.1.1:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 Amp TP & N |
| 17 | 90.14.24.2:Supply & fixingthe following Power Capacitors 3 phase delta connected in positon and giving connection.2 KVAr, 3 phase, 440 V, delta connected standard duty Metalised Poly Propylene Capacitor, Cylinderical Type, suitable for direct connection to motors. |
| 18 | 2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 19 | OD272448/2022-2023: supply and providing dry run protection relay curren based in the existing starter and giving conection etc as required (L&T make i-AD |
| 20 | 90.6.6.3:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm |
| 21 | 1.17.22:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 4 sq. mm |
| 22 | 5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 23 | OD271365/2022-2023:Supply and providing Test joint for earthing made up of 2 nos, 25x5 mm GI strip, 25 cm long placed on either sides of earth leads and watering pipe, bending, drilling and tightening with 4 sets of brass/SS nut, bolt, washer etc as required. |
| 24 | 5.15:Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 25 | 90.16.2.1:Supply and laying of the following sizes of B class GIpipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.15.mm dia. G.I pipe ( medium class) |
| 26 | 90.3.17.2:Supply, conveyance and erection ofthe following sizes of 'B' class GI pipe in single section for post top lantern of all types on concrete base (excluding charges for concrete base and excavation) and painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer etc. as required.40 mm dia GI pipe |
| 27 | 90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG) |
| 28 | 90.16.1.4:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG) |
| 29 | 90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG) |
| 30 | 90.16.5.4:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.00 mm (8 SWG) |
| 31 | OD271366/2022-2023:Supply and providing 25X3 mm brass bolt and nut with washers on the existing MS box/earth bus etc as required including drilling necessary holes as required. |
| 32 | OD271367/2022-2023:Supply and providing 25X6 mm brass bolt and nut with washers on the existing MS box/earth bus etc as required including drilling necessary holes as required. |
| 33 | OD271368/2022-2023:Supply and providing dust and vermin proof,wall mounting, Hot press moulded SMC Meter Boxof following sizes suitable for fixing KSEB meter, fuse units, CT etc, hinged door construction for the front side with compartments if necessary, providing vision panel for the meter compartment, knock out for cable entry and exit,with350x481x210 mm or nearest size.(Sintex GS-MB 3750 or equivalent make). |
| 34 | OD272444/2022-2023:Supply and fixing the following accessories in the existing board and giving connections etc.32A 2 way Neutral link mounted on DMC/ SMC base |
| 35 | OD272445/2022-2023:Supply and fixing the following accessories in the existing board and giving connections etc.32A HRC Fuse Base with HRC Fuse link |
| 36 | OD271371/2022-2023:Charges for preparation of application and test report for KSEB connection |
AI Tender Summary
Tender Timeline
Nov 24, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 02, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender