Tender For Annual Repairing And Maintenance Of Water Supply Line At Bhatadi Township Under Bocm Of Psa.
Tender Value
33.62 Lakhs
Estimated cost
Bid Submission
05 Dec 2022
0 days left
EMD
42100
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandrapur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Repairing And Maintenance Of Water Supply Line At Bhatadi Township Under Bocm Of Psa.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 80 mm dia nominal bore |
| 2 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work50 mm dia nominal bore |
| 3 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall 25 mm dia nominal bore |
| 4 | Making connection of G.I. distribution branch with G.I. main of following sizesby providing and fixing tee, including cutting and threading the pipe etc. complete :25 to 40 mm nominal bore |
| 5 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 50 to 80 mm nominal bore |
| 6 | Providing and fixing G.I. pipes complete with G.I. fittingsand clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall15mm dia nominal bore. |
| 7 | Providing and fixing G.I. Union in G.I. pipe includingcutting and threading the pipe and making long screwsetc. complete (New work) : 15 mm nominal bore |
| 8 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 25 mm nominal bore |
| 9 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore |
| 10 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore |
| 11 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore |
| 12 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore |
| 13 | Providing and fixing uplasticised PVC connection pipe with brass unions :30 cm length15mmnominal bore. |
| 14 | Providing and fixing brass stop cock of approved quality : 15 mm nominal bore |
| 15 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore |
| 16 | Providing and fixing PTMT bib cock of approved qualityand colour.15mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 17 | Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 18 | Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 107 mm long, weighing not less than 110 gms |
| 19 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 150 mm diameter class I |
| 20 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 100 mm diameterClass I |
| 21 | Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspectioncharges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.complete. a) Sluice valves - PN -1 (Without by pass ) 80mm dia |
| 22 | Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspectioncharges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.complete. a) Sluice valves - PN -1 (Without by pass ) 50mm dia |
| 23 | Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut boltsand giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) 80mm |
| 24 | Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut boltsand giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) 50mm |
| 25 | Providing and fixing GI flange 50 mm dia i/c material and labour cost i/c. all complete as per direction of engineering incharge. |
| 26 | Providing and fixing GI flange 80 mm dia i/c material and labour cost i/c. all complete as per direction of engineering incharge. |
| 27 | Total impact of GST for the purpose of CTC |
AI Tender Summary
Tender Timeline
Nov 24, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedDec 05, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 06, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender