|
| 1 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximumtoxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 45 x 70 mm |
| 2 | Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid board one side whitecolour and other side of board laminated with PVC foil ofminimum 14 micron thickness of approved design pastedwith hot melt adhesive for cup boards, work stations andbathroom/kitchen cabinet etc. of required sizes comprisingof virgin polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/ ricehusk/wheat husk) and non toxic additives (maximumtoxicity index of 12 for 100 gms) having minimum densityof 650 kg/cum and screw withdrawal strength of 1800 N(Face) & 900 N (Edge), minimum compressive strength 50N/mm2, modulus of elasticity 850 N/mm2 and resistanceto spread of flame of Class A category with property ofbeing termite/borer proof, water/moisture proof and fireretardant and fixing with stainless steel piano hinges/softclose clip on concealed hinges of required size withnecessary full body threaded star headed counter sunk S.Sscrews, all as per direction of Engineer-In- Charge. (Note:stainless steel piano hinges/soft close clip on concealedhinges and necessary S.S screws shall be paid separately)25 mm thick |
| 3 | Providing and fixing 16mm thickbison panel cement particle board door shutter including materials and labour all complete. |
| 4 | Taking out doors, windows and clerestory window shutters(steel or wood) including stacking within 50 metres lead :Of area 3 sq. metres and below |
| 5 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :75x47x1.80 mm |
| 6 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :100x58x1.90 mm |
| 7 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :75 mm |
| 8 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm |
| 9 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :100x10 mm |
| 10 | Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete :200 mm weighing not less than 240 gms |
| 11 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm |
| 12 | Providing and fixing angle iron frames for doors, windowsand ventilators of mild steel Angle sections of size 35x35x5mm, joints mitred and welded by angle iron 35x35x5 mmor 35x 5 mm flat pieces to the existing T-iron frame or tothe wall with dash fastener, including fixing of necessarybutt hinges and screws and applying a priming coat ofapproved steel primer, all complete as per the direction ofEngineer-In-charge |
| 13 | Dismantling steel work in single sections includingdismembering and stacking within 50 metres lead in: Channels, angles, tees and flats |
| 14 | Repairs to plaster of thickness 12 mm to 20 mm in patchesof area 2.5 sq.meters and under, including cutting thepatch in proper shape, raking out joints and preparing andplastering the surface of the walls complete, includingdisposal of rubbish to the dumping ground, all complete asper direction of Engineer-in-Charge.With cement mortar 1:4 (1 cement : 4 fine sand) |
| 15 | Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid decorative type flushdoor shutter of required size comprising of virgin polymerof K value 58-60 (Suspension Grade), calcium carbonateand natural fibers (wood powder/ rice husk/wheat husk)and non toxic additives (maximum toxicity index of 12 for100 gms) having minimum density of 650 kg/cum andscrew withdrawal strength of 1800 N (Face) & 900 N(Edge), minimum compressive strength 50 N/mm2,modulus of elasticity 850 N/mm2 and resistance to spreadof flame of Class A category with property of beingtermite/borer proof, water/moisture proof and fireretardant. WPC to be laminated with PVC foil of minimum14 microns thick of approved design pasted with hot meltadhesive on both faces of shutter and fixing with stainlesssteel butt hinges of required size with necessary full bodythreaded star headed counter sunk S.S screws, all as perdirection of Engineer-In- Charge. (Note: stainless steel butthinges and necessary S.S screws shall be paid separately)30 mm thick |
| 16 | Total impact of GST for the purpose of CTC |
