Tender For Development Of Distribution Infrastructure At Agra-1 Zone(Electricity Distribution Circlesedc Fatehabadedc Mainpuri, Edc Firozabad , Eudc Firozabad), District Agra,Mainpuri & Firozabadofuttar Pradeshstate Under The Revamped Reforms-Based And Re, Agra-Uttar Pradesh

TDR : 34955632

Tender Notice
Corrigendum Details
BOQ

Expired

Agra , Uttar Pradesh

Tender Brief : Corrigendum : Tender For Development Of Distribution Infrastructure At Agra-1 Zone(Electricity Distribution Circlesedc Fatehabadedc Mainpuri, Edc Firozabad , Eudc Firozabad), District Agra,Mainpuri & Firozabadofuttar Pradeshstate Under The Revamped Reforms-Based And Re

Document Fees
₹ 29500 /-

EMD
₹ 50000000.0 /-

Tender Value
₹ 452.10 Crore /-

Submission Date
21-12-2022

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	14-12-2022	Date Extension-I	Date	21-12-2022
2	09-12-2022	Corrigendum_1	Technical Bid	14-12-2022

Name of Work: Development of Distribution Infrastructure at AGRA-1 ZONE(Electricity Distribution CirclesEDC FatehabadEDC Mainpuri, EDC Firozabad , EUDC Firozabad), District Agra,Mainpuri & FirozabadofUTTAR PRADESHState under the Revamped Reforms-based and Results-linked, Distribution Sector Scheme

Sl. No.	Item Description
1	SUPPLY OF ITEMS
2	8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification
3	9 Meter long STP as per Approved Drawing and Technical specification (SP-33)
4	11 Meter long STP as per Approved Drawing and Technical specification (SP-55)
5	13 Meter long STP as per Approved Drawing and Technical specification (SP-72)
6	Stone Pad (300x300x75mm)
7	1 core (Al.) 120mm2 LT Armoured XLPE Cable
8	1 core (Al.) 95mm2 LT Armoured XLPE Cable
9	1 core (Al.) 50mm2 LT Armoured XLPE Cable
10	1 core (Al.) 25mm2 LT Armoured XLPE Cable
11	11 kVXLPE Cable 3x185 Sq. mm. (Armoured)
12	1x25 mm2 Un-armoured XLPE insulated Al. LT Cable for energising the distribution boxes.
13	1x25 mm2 Armoured XLPE insulated Al. LT Cable for energising the distribution boxes.
14	Armoured Service Cable 2CX4 SQMM For Single phase consumer for upto 2KW
15	Armoured Service Cable 2CX6 SQMM For Single phase consumer for above 2 and upto 4 KW
16	Armoured Service Cable 4CX10 SQMM For Three phase consumer for upto 10kW
17	Armoured Service Cable 4CX16 SQMM For Three phase consumer for upto 25kW
18	Aerial Bunched XLPE Cable 3X120 (Ph) + 1X95 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm
19	Aerial Bunched XLPE Cable 3X50 (Ph) + 1X35 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm
20	Aerial Bunched XLPE Cable 3X95 (Ph) + 1X70 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm
21	Aerial Bunched XLPE Cable 1X16 (Ph) + 1X25 ( Bare messenger cum neutral) sqmm
22	LT XLPE cable 3.5x150 Sq mm
23	LT XLPE cable 3.5x70 Sq mm
24	LT XLPE cable 4x16 Sq mm
25	L.T. XLPE cable 10 Sq. mm Single Core
26	LT XLPE cable 3.5x400 Sq mm
27	ACSR Rabbit Conductor
28	Aluminium binding wire - 6 SWG
29	Jointing sleave -ACSR Rabbit
30	Mid Span Joint 120mm2
31	ACSR Rabbit Conductor -Jumpering Works
32	ACSR Weasel Conductor-Jumpering Works
33	11 KV Danger Board with Clamp and Nuts & Bolts
34	11 KV Number Plate with Clamp and Nuts & Bolts
35	11KV Fuse Set (Drop out) with clamps
36	11KV TPMO with fixing clamps
37	10 KVA, 11KV/250 V, 1 Ph Transformer (Level-1 Self Protected Aluminium Wound Type)
38	16 KVA, 11KV/250 V, 1 Ph Transformer (Level-1 Self Protected Aluminium Wound Type)
39	25 KVA , 11/0.433 KV T/F (Level-1 Self Protected Aluminium Wound Type)
40	63 KVA , 11/0.433 KV T/F (Level-1 Self Protected Aluminium Wound Type)
41	100 KVA , 11/0.433 KV T/F (Level-1 Self Protected Aluminium Wound Type)
42	LT Distribution Box withMCCB for protection of 10 KVA T/F and Bus Bar foroutgoing consumer connections with Energy Meter (SMC Type) as per TS. (DRG- no.REC/RDSS/DTR/SS/20 )
43	LT Distribution Box withMCCB for protection of 16 KVA T/F and Bus Bar foroutgoing consumer connections with Energy Meter (SMC Type) as per TS.( DRG- no. REC/RDSS/DTR/SS/20 )
44	LT Distribution Box withMCCB and AMI metering (Smart Meter compitable with System) equipment & fixing arrangement As per TS . (SMC Type) for 25KVA (DRG- no. REC/RDSS/DTR/SS/24)
45	LT incoming Panel with AMI metering (Smart Meter compitable with System DRG- no. REC/RDSS/DTR/SS/16) equipment & fixing arrangement As per TS . (SMC Type) for 63 KVA (DRG- no. REC/RDSS/DTR/SS/23)
46	LT incoming Panel with AMI metering (Smart Meter compitable with System DRG- no. REC/RDSS/DTR/SS/23) equipment & fixing arrangement As per TS . (SMC Type) for 100KVA (DRG- no. REC/RDSS/DTR/SS/23)
47	LT incoming Panel with AMI metering (Smart Meter compitable with System DRG- no. REC/RDSS/DTR/SS/23) equipment & fixing arrangement as per TS. (SMC Type) for 250KVA (DRG- no. REC/RDSS/DTR/SS/22)
48	Copper L-Piece 50x225x10mm
49	Copper L-Piece 50x225x12mm
50	Al Lug long barrel off size
51	9 KV LA , 5 KA (Distribution Class)
52	9 KV LA , 10 KA (Station Class)
53	Earthing Coil connected with nutbolt using Charchol and Salt
54	GI Flat 50X6 for Earthing
55	GI Flat 25X3 for Earthing
56	Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc.
57	GI Pipe 6\" Diameter with clamps
58	G.I. Barbed Wire
59	G.I. Wire No. 16 SWG for binding
60	G.I. Wire 6 SWG
61	G.I. Wire 8 SWG
62	11 KV Disc Fitting T & C type
63	11 KV Polymer Disc Insulators45 KNT&C Type
64	11 KV Pin Insulator Polymer Type as per TS
65	33 KV Composit Pin Insulator (Polymer Type)
66	LT Shackle Insulator
67	Insulating Piercing Connector (50-150 sq.mm)
68	Insulating Piercing Connector (16-150 sq.mm)
69	Dead End clamp (Insulated)
70	End Cap for AB cable
71	Suspension clamps (Insulated)
72	Pole Clamps with with I-Hook & nut & bolts for laying ABC
73	SS Strips As per Drg -REC/RDSS/LT-ACC-ABC/01
74	Dead End assembly unit as Per Drg-REC/RDSS/LT-ACC-ABC/03
75	Suspension assembly unit as Per Drg- REC/RDSS/LT-ACC-ABC/
76	D-Straps
77	Insulation mastic tape (2inc X 10 feet).
78	Single phase Glass Fiber Reinforced Polyester Sheet Moulding Compound (SMC) Pole top distribution box with clamps (40x3 mm) and nut & bolts
79	Three phase Glass Fiber Reinforced Polyester Sheet Moulding Compound (SMC)Pole top distribution box with clamps (40x3 mm) and nut & bolts
80	Aluminium paint
81	Red Oxide Paint
82	Smart TVM Meter Compatible with System (AMI) complete Set
83	HDPE Pipe, PN-4 PE-80(160 mm dia.) with clamp, etc
84	Crimping type heavy duty aluminium lugs suitable for connection XLPE cables
85	Helical formed Fitting
86	Cable Route Marker
87	PG Clamps 16 Sq mm .- 50 sq mm (For line to line jumpering of massenger wire & energizing DB Neutral)
88	PG Clamp for Rabbit
89	GI Stay Wire 7/10 SWG
90	GI Stay Wire 7/8 SWG
91	HT Guy Insulator
92	LT Guy Insulator
93	33 KV Stay Complete (GI Stay Rod 20x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers
94	Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
95	Turn Buckle
96	HT Stay Clamp as per approved drawing-33 KV
97	HT Stay Clamp as per approved drawing-11 KV
98	LT Stay Clamp as per approved drawing
99	11 KV Cross arm holding clamps with bolts & nuts
100	11 KV Steel X-arm V type (GI Channel 65X 65 X 6 mm )
101	33 KV Cross arm holding clamps with bolts & nuts
102	33 KV Steel X-arm V type (GI Channel 100 X 50 X 6 mm )
103	Angle for vertical ArmL50x50x6 (Type -A)-900MM
104	Angle for vertical ArmL50x50x6 (Type -B)- 900MM
105	Top Clamp for Vertical arm L 50X6 (Type -A)- 435 mm
106	Top Clamp for Vertical arm L 50X6 (Type -B)- 435 mm
107	Bottom Clamp for Vertical arm L 50X6 (Type -A)- 507 mm
108	Bottom Clamp for Vertical arm L 50X6 (Type -B)- 507 mm
109	Clamp FOR Top Channel with Nut bolt
110	Clamps for LT T-off with bolts & nuts
111	E- Bracket for 11 KV line
112	Eye Bolt
113	F- Bracket for 11 KV line
114	F- Bracket for 33 KV line
115	Guarding angle 65x55x6 mm, 1.6 mtr. With Clamp
116	Holding clamps for Top channel, GI Channel & GI Angle with bolts & nuts
117	GI Top channel 100x50x6 mm., 2240 mmlong (17.70 Kg/M)
118	GI Angle Iron 65x65x6mm, 2700 mm long bracing with 4 clamps
119	GI Channel 100x50x6 mm 2028 mm long (For Fuse Set )
120	GI Top channel 125x65x6 mm., 2240 mmlong
121	Tee-off Channel 100x50x1300 mm with clamp, Nut & Bolt
122	Clamps for Dist. Box (40x6 mm)
123	Clamps for T/F (75x8 mm GI flat).
124	GI. guarding Angle 75x75x6 mm 3010 mm long with Clamp
125	Height raising channel 100x50,2240 mm long
126	Back clamp for Height raising channel holding clamps with bolts & nuts
127	GI Channel clamp with nuts & bolts
128	GI Channel 125x65 mm
129	GIangle 75x75x6x2028 mm with clamp &bolt and nut (T/F base)
130	GI Channel 75x75x6 mm &bolt and nut (T/F base Support)
131	11 KV, 1250 A Outgoing VCB Indoor type with CTR 200/100/5 - 5A 350 MVA (Compatible with existing VCB at 33/11 KV substation)
132	Heat Shrinkable Jointing Kit Outdoor for 11 KV 3x185 sq. mm XLPE Cable
133	Heat Shrinkable Jointing Kit indoor for 11 KV 3x185 sq. mm XLPE Cable
134	Cable jointing kit straight through (3x185)
135	Extra Prefabricated Items Like Clamp , Channel, Angle with Nut bolt
136	Satellite Multi-Tap Connector as per TS
137	Sign Board as per TS and Approved Drawing
138	ERECTION PART
139	Conversion of existing Service Cable to New Armoured Service cable with all required accessories like lugs etc. (Complete Work in all respect) and Removing and shifting of Existing Material to client store
140	Armoured Service Cable 2CX4 SQMM For Single phase consumer for upto 2KW
141	Armoured Service Cable 2CX6 SQMM For Single phase consumer for above 2 and upto 4 KW
142	Armoured Service Cable 4CX10 SQMM For Three phase consumer for upto 10kW
143	Armoured Service Cable 4CX16 SQMM For Three phase consumer for upto 25kW
144	Erection, Testingand commissioning of Replacement ofLT Bare Conductor with AB Cables (Complete Work in all respect)
145	8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification
146	9 Meter long STP as per Approved Drawing and Technical specification (SP-33)
147	Stone Pad (300x300x75mm)
148	Aerial Bunched XLPE Cable 3X120 (Ph) + 1X95 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm
149	Aerial Bunched XLPE Cable 3X95 (Ph) + 1X70 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm
150	Aerial Bunched XLPE Cable 3X50 (Ph) + 1X35 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm
151	Pole Clamps with with I-Hook & nut & bolts for laying ABC
152	Dead End clamp (Insulated)
153	Suspension clamps (Insulated)
154	SS Strips As per Drg -REC/RDSS/LT-ACC-ABC/01
155	Dead End assembly unit as Per Drg-REC/RDSS/LT-ACC-ABC/03
156	Suspension assembly unit as Per Drg- REC/RDSS/LT-ACC-ABC/
157	End Cap for AB cable
158	Insulating Piercing Connector (16-150 sq.mm)
159	PG Clamps 16 Sq mm .- 50 sq mm (For line to line jumpering of massenger wire & energizing DB Neutral)
160	1x25 mm2 Un-armoured XLPE insulated Al. LT Cable for energising the distribution boxes.
161	Single phase Glass Fiber Reinforced Polyester Sheet Moulding Compound (SMC) Pole top distribution box with clamps (40x3 mm) and nut & bolts
162	Three phase Glass Fiber Reinforced Polyester Sheet Moulding Compound (SMC)Pole top distribution box with clamps (40x3 mm) and nut & bolts
163	Earthing Coil connected with nutbolt using Charchol and Salt
164	Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
165	LT Guy Insulator
166	GI Stay Wire 7/10 SWG
167	LT Stay Clamp as per approved drawing
168	Removing and shifting of Existing Material to client store
169	Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing
170	Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.39 Cmt (9 Meter - STP ) as per approved Drawing
171	Erection, Testingand commissioning of Replacement ofAB Cable (Damage)with AB Cables (Complete Work in all respect)
172	8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification
173	9 Meter long STP as per Approved Drawing and Technical specification (SP-33)
174	Stone Pad (300x300x75mm)
175	Aerial Bunched XLPE Cable 3X120 (Ph) + 1X95 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm
176	Aerial Bunched XLPE Cable 3X95 (Ph) + 1X70 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm
177	Pole Clamps with with I-Hook & nut & bolts for laying ABC
178	Dead End clamp (Insulated)
179	Suspension clamps (Insulated)
180	SS Strips As per Drg -REC/RDSS/LT-ACC-ABC/01
181	Dead End assembly unit as Per Drg-REC/RDSS/LT-ACC-ABC/03
182	Suspension assembly unit as Per Drg- REC/RDSS/LT-ACC-ABC/
183	End Cap for AB cable
184	Insulating Piercing Connector (16-150 sq.mm)
185	PG Clamps 16 Sq mm .- 50 sq mm (For line to line jumpering of massenger wire & energizing DB Neutral)
186	1x25 mm2 Un-armoured XLPE insulated Al. LT Cable for energising the distribution boxes.
187	Single phase Glass Fiber Reinforced Polyester Sheet Moulding Compound (SMC) Pole top distribution box with clamps (40x3 mm) and nut & bolts
188	Three phase Glass Fiber Reinforced Polyester Sheet Moulding Compound (SMC)Pole top distribution box with clamps (40x3 mm) and nut & bolts
189	Earthing Coil connected with nutbolt using Charchol and Salt
190	Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
191	LT Guy Insulator
192	GI Stay Wire 7/10 SWG
193	LT Stay Clamp as per approved drawing
194	Removing and shifting of Existing Material to client store
195	Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing
196	Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.39 Cmt (9 Meter - STP ) as per approved Drawing
197	Erection, Testingand commissioning of Replacement of LT Line with XLPE Armoured Cables (Complete Work in all respect)
198	8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification
199	9 Meter long STP as per Approved Drawing and Technical specification (SP-33)
200	Stone Pad (300x300x75mm)
201	Angle for vertical ArmL50x50x6 (Type -A)-900MM
202	Top Clamp for Vertical arm L 50X6 (Type -A)- 435 mm
203	Bottom Clamp for Vertical arm L 50X6 (Type -A)- 507 mm
204	Angle for vertical ArmL50x50x6 (Type -B)- 900MM
205	Top Clamp for Vertical arm L 50X6 (Type -B)- 435 mm
206	Bottom Clamp for Vertical arm L 50X6 (Type -B)- 507 mm
207	LT Shackle Insulator
208	D-Straps
209	1 core (Al.) 120mm2 LT Armoured XLPE Cable
210	1 core (Al.) 95mm2 LT Armoured XLPE Cable
211	1 core (Al.) 50mm2 LT Armoured XLPE Cable
212	1 core (Al.) 25mm2 LT Armoured XLPE Cable
213	Mid Span Joint 120mm2
214	Insulating Piercing Connector (50-150 sq.mm)
215	Insulation mastic tape (2inc X 10 feet).
216	Single phase Glass Fiber Reinforced Polyester Sheet Moulding Compound (SMC) Pole top distribution box with clamps (40x3 mm) and nut & bolts
217	Three phase Glass Fiber Reinforced Polyester Sheet Moulding Compound (SMC)Pole top distribution box with clamps (40x3 mm) and nut & bolts
218	Satellite Multi-Tap Connector as per TS
219	1x25 mm2 Armoured XLPE insulated Al. LT Cable for energising the distribution boxes.
220	Earthing Coil connected with nutbolt using Charchol and Salt
221	Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
222	LT Guy Insulator
223	GI Stay Wire 7/10 SWG
224	LT Stay Clamp as per approved drawing
225	Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing
226	Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.39 Cmt (9 Meter - STP ) as per approved Drawing
227	Removing and shifting of Existing Material to client store
228	Survey , Erection, Testingand commissioning of 11 Kv Line (Feeder Spliting Due to over loading) on 8.5 Mtr PCC pole-116 CKM and 11 Mtr STP Pole -151 CKM (Complete Work in all respect)
229	Route survey and pole spotting for 11 KV line
230	8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification
231	11 Meter long STP as per Approved Drawing and Technical specification (SP-55)
232	ACSR Rabbit Conductor
233	Stone Pad (300x300x75mm)
234	11 KV Steel X-arm V type (GI Channel 65X 65 X 6 mm )
235	11 KV Cross arm holding clamps with bolts & nuts
236	F- Bracket for 11 KV line
237	GI Top channel 100x50x6 mm., 2240 mmlong (17.70 Kg/M)
238	Clamp FOR Top Channel with Nut bolt
239	GI Angle Iron 65x65x6mm, 2700 mm long bracing with 4 clamps
240	E- Bracket for 11 KV line
241	11 KV Pin Insulator Polymer Type as per TS
242	11 KV Polymer Disc Insulators45 KNT&C Type
243	11 KV Disc Fitting T & C type
244	PG Clamp for Rabbit
245	Aluminium binding wire - 6 SWG
246	Jointing sleave -ACSR Rabbit
247	11 KV Danger Board with Clamp and Nuts & Bolts
248	G.I. Barbed Wire
249	Aluminium paint
250	Red Oxide Paint
251	Earthing Coil connected with nutbolt using Charchol and Salt
252	Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
253	HT Guy Insulator
254	GI Stay Wire 7/10 SWG
255	HT Stay Clamp as per approved drawing-11 KV
256	11 KV Number Plate with Clamp and Nuts & Bolts
257	Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing
258	Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.44 Cmt (11 Meter - STP ) as per approved Drawing
259	Erection, Testingand commissioning of 11 KV VCB with complete Assoceries as apporoved Drawing and Tecchanical Specifiactions (Complete Work in all respect)
260	11 KV, 1250 A Outgoing VCB Indoor type with CTR 200/100/5 - 5A 350 MVA (Compatible with existing VCB at 33/11 KV substation)
261	11 kVXLPE Cable 3x185 Sq. mm. (Armoured)
262	Heat Shrinkable Jointing Kit indoor for 11 KV 3x185 sq. mm XLPE Cable
263	Heat Shrinkable Jointing Kit Outdoor for 11 KV 3x185 sq. mm XLPE Cable
264	Smart TVM Meter Compatible with System (AMI) complete Set
265	Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc.
266	GI Flat 50X6 for Earthing
267	8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification
268	Stone Pad (300x300x75mm)
269	GI Top channel 100x50x6 mm., 2240 mmlong (17.70 Kg/M)
270	Clamp FOR Top Channel with Nut bolt
271	GI Angle Iron 65x65x6mm, 2700 mm long bracing with 4 clamps
272	11 KV Polymer Disc Insulators45 KNT&C Type
273	11 KV Disc Fitting T & C type
274	PG Clamp for Rabbit
275	11 KV Danger Board with Clamp and Nuts & Bolts
276	G.I. Barbed Wire
277	Earthing Coil connected with nutbolt using Charchol and Salt
278	Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
279	HT Guy Insulator
280	GI Stay Wire 7/10 SWG
281	HT Stay Clamp as per approved drawing-11 KV
282	Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing
283	Survey , Erection, Testingand commissioning of 11 Kv Line (Feeder Sagrigation) (Complete Work in all respect)
284	Route survey and pole spotting for 11 KV line
285	8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification
286	ACSR Rabbit Conductor
287	Stone Pad (300x300x75mm)
288	11 KV Steel X-arm V type (GI Channel 65X 65 X 6 mm )
289	11 KV Cross arm holding clamps with bolts & nuts
290	F- Bracket for 11 KV line
291	GI Top channel 100x50x6 mm., 2240 mmlong (17.70 Kg/M)
292	Clamp FOR Top Channel with Nut bolt
293	GI Angle Iron 65x65x6mm, 2700 mm long bracing with 4 clamps
294	E- Bracket for 11 KV line
295	11 KV Pin Insulator Polymer Type as per TS
296	11 KV Polymer Disc Insulators45 KNT&C Type
297	11 KV Disc Fitting T & C type
298	PG Clamp for Rabbit
299	Aluminium binding wire - 6 SWG
300	Jointing sleave -ACSR Rabbit
301	11 KV Danger Board with Clamp and Nuts & Bolts
302	G.I. Barbed Wire
303	Earthing Coil connected with nutbolt using Charchol and Salt
304	Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
305	HT Guy Insulator
306	GI Stay Wire 7/10 SWG
307	HT Stay Clamp as per approved drawing-11 KV
308	11 KV Number Plate with Clamp and Nuts & Bolts
309	Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing
310	Extra Prefabricated Items Like Clamp , Channel, Angle with Nut bolt
311	Erection, Testingand commissioning of 11 KV VCB with complete Assoceries as apporoved Drawing and Tecchanical Specifiactions (Feeder Segrigation) (Complete Work in all respect)
312	11 KV, 1250 A Outgoing VCB Indoor type with CTR 200/100/5 - 5A 350 MVA (Compatible with existing VCB at 33/11 KV substation)
313	11 kVXLPE Cable 3x185 Sq. mm. (Armoured)
314	Heat Shrinkable Jointing Kit indoor for 11 KV 3x185 sq. mm XLPE Cable
315	Heat Shrinkable Jointing Kit Outdoor for 11 KV 3x185 sq. mm XLPE Cable
316	Smart TVM Meter Compatible with System (AMI) complete Set
317	Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc.
318	GI Flat 50X6 for Earthing
319	8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification
320	Stone Pad (300x300x75mm)
321	GI Top channel 100x50x6 mm., 2240 mmlong (17.70 Kg/M)
322	Clamp FOR Top Channel with Nut bolt
323	GI Angle Iron 65x65x6mm, 2700 mm long bracing with 4 clamps
324	11 KV Polymer Disc Insulators45 KNT&C Type
325	11 KV Disc Fitting T & C type
326	PG Clamp for Rabbit
327	11 KV Danger Board with Clamp and Nuts & Bolts
328	G.I. Barbed Wire
329	Earthing Coil connected with nutbolt using Charchol and Salt
330	Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
331	HT Guy Insulator
332	GI Stay Wire 7/10 SWG
333	HT Stay Clamp as per approved drawing-11 KV
334	Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing
335	Erection, Testingand commissioning of 11 KV NH/SH Crossing (Complete Work in all respect)
336	11 kVXLPE Cable 3x185 Sq. mm. (Armoured)
337	Heat Shrinkable Jointing Kit Outdoor for 11 KV 3x185 sq. mm XLPE Cable
338	HDPE Pipe, PN-4 PE-80(160 mm dia.) with clamp, etc
339	GI Pipe 6\" Diameter with clamps
340	11 Meter long STP as per Approved Drawing and Technical specification (SP-55)
341	GI Angle Iron 65x65x6mm, 2700 mm long bracing with 4 clamps
342	GI Top channel 100x50x6 mm., 2240 mmlong (17.70 Kg/M)
343	Clamp FOR Top Channel with Nut bolt
344	G.I. Barbed Wire
345	11 KV Pin Insulator Polymer Type as per TS
346	11 KV Polymer Disc Insulators45 KNT&C Type
347	11 KV Disc Fitting T & C type
348	PG Clamp for Rabbit
349	E- Bracket for 11 KV line
350	11 KV Danger Board with Clamp and Nuts & Bolts
351	Aluminium paint
352	Red Oxide Paint
353	Earthing Coil connected with nutbolt using Charchol and Salt
354	Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
355	HT Guy Insulator
356	GI Stay Wire 7/10 SWG
357	HT Stay Clamp as per approved drawing-11 KV
358	Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.44 Cmt (11 Meter - STP ) as per approved Drawing
359	Cable laying by Horizontal Directional Drilling Method
360	Statutory Clearances including documentation,approval fee and all other charges (for National Highway)
361	Statutory Clearances including documentation,approval fee and all other charges (for State Highway)
362	Erection, Testingand commissioning of 11 KV Railway Crossing (Complete Work in all respect)
363	11 kVXLPE Cable 3x185 Sq. mm. (Armoured)
364	Heat Shrinkable Jointing Kit Outdoor for 11 KV 3x185 sq. mm XLPE Cable
365	HDPE Pipe, PN-4 PE-80(160 mm dia.) with clamp, etc
366	GI Pipe 6\" Diameter with clamps
367	11 Meter long STP as per Approved Drawing and Technical specification (SP-55)
368	GI Angle Iron 65x65x6mm, 2700 mm long bracing with 4 clamps
369	GI Top channel 100x50x6 mm., 2240 mmlong (17.70 Kg/M)
370	Clamp FOR Top Channel with Nut bolt
371	G.I. Barbed Wire
372	11 KV Pin Insulator Polymer Type as per TS
373	11 KV Polymer Disc Insulators45 KNT&C Type
374	11 KV Disc Fitting T & C type
375	PG Clamp for Rabbit
376	E- Bracket for 11 KV line
377	11 KV Danger Board with Clamp and Nuts & Bolts
378	Aluminium paint
379	Red Oxide Paint
380	Earthing Coil connected with nutbolt using Charchol and Salt
381	9 KV LA , 10 KA (Station Class)
382	Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
383	HT Guy Insulator
384	GI Stay Wire 7/10 SWG
385	HT Stay Clamp as per approved drawing-11 KV
386	Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.44 Cmt (11 Meter - STP ) as per approved Drawing
387	Cable laying by Horizontal Directional Drilling Method
388	Statutory Clearances including documentation,approval fee,way leave charges and all other charges (For Railway Crossing)
389	Erection, Testingand commissioning of 11 kV Line crossing by 33KV Existing Lines on STP 13 Mtr with Cradle Guarding (Complete Work in all respect)
390	13 Meter long STP as per Approved Drawing and Technical specification (SP-72)
391	33 KV Steel X-arm V type (GI Channel 100 X 50 X 6 mm )
392	33 KV Cross arm holding clamps with bolts & nuts
393	33 KV Composit Pin Insulator (Polymer Type)
394	GI. guarding Angle 75x75x6 mm 3010 mm long with Clamp
395	F- Bracket for 33 KV line
396	Turn buckle
397	G.I. Wire 6 SWG
398	G.I. Wire 8 SWG
399	G.I. Wire No. 16 SWG for binding
400	Eye Bolt
401	Helical formed Fitting
402	11 KV Danger Board with Clamp and Nuts & Bolts
403	11 KV Number Plate with Clamp and Nuts & Bolts
404	G.I. Barbed Wire
405	Red Oxide Paint
406	Aluminium paint
407	Aluminium binding wire - 6 SWG
408	Earthing Coil connected with nutbolt using Charchol and Salt
409	Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc.
410	33 KV Stay Complete (GI Stay Rod 20x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers
411	HT Guy Insulator
412	GI Stay Wire 7/8 SWG
413	HT Stay Clamp as per approved drawing-33 KV
414	Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.64 Cmt (13 Meter - STP ) as per approved Drawing
415	Erection, Testingand commissioning of LT Line crossing by 11 kV Lines on STP 11 Mtr with Cradle Guarding (Complete Work in all respect)
416	11 Meter long STP as per Approved Drawing and Technical specification (SP-55)
417	11 KV Steel X-arm V type (GI Channel 65X 65 X 6 mm )
418	11 KV Cross arm holding clamps with bolts & nuts
419	11 KV Pin Insulator Polymer Type as per TS
420	F- Bracket for 11 KV line
421	Guarding angle 65x55x6 mm, 1.6 mtr. With Clamp
422	Turn buckle
423	G.I. Wire 6 SWG
424	G.I. Wire 8 SWG
425	G.I. Wire No. 16 SWG for binding
426	Eye Bolt
427	Helical formed Fitting
428	11 KV Danger Board with Clamp and Nuts & Bolts
429	11 KV Number Plate with Clamp and Nuts & Bolts
430	G.I. Barbed Wire
431	Red Oxide Paint
432	Aluminium paint
433	Aluminium binding wire - 6 SWG
434	Earthing Coil connected with nutbolt using Charchol and Salt
435	Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc.
436	Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
437	HT Guy Insulator
438	GI Stay Wire 7/8 SWG
439	HT Stay Clamp as per approved drawing-11 KV
440	Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.44 Cmt (11 Meter - STP ) as per approved Drawing
441	Erection, Testingand commissioning of UG Cable 11 KV Line (Complete Work in all respect)
442	Radar route survey for route profile of any utility cables,pipes etc. along the route as per TS and scope of work
443	11 kVXLPE Cable 3x185 Sq. mm. (Armoured)
444	Heat Shrinkable Jointing Kit Outdoor for 11 KV 3x185 sq. mm XLPE Cable
445	Cable jointing kit straight through (3x185)
446	GI Pipe 6\" Diameter with clamps
447	Cable Route Marker
448	HDPE Pipe, PN-4 PE-80(160 mm dia.) with clamp, etc
449	11 Meter long STP as per Approved Drawing and Technical specification (SP-55)
450	GI Angle Iron 65x65x6mm, 2700 mm long bracing with 4 clamps
451	GI Top channel 100x50x6 mm., 2240 mmlong (17.70 Kg/M)
452	Clamp FOR Top Channel with Nut bolt
453	G.I. Barbed Wire
454	11 KV Pin Insulator Polymer Type as per TS
455	11 KV Polymer Disc Insulators45 KNT&C Type
456	11 KV Disc Fitting T & C type
457	PG Clamp for Rabbit
458	E- Bracket for 11 KV line
459	11 KV Danger Board with Clamp and Nuts & Bolts
460	Aluminium paint
461	Red Oxide Paint
462	Earthing Coil connected with nutbolt using Charchol and Salt
463	Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
464	HT Guy Insulator
465	GI Stay Wire 7/10 SWG
466	HT Stay Clamp as per approved drawing-11 KV
467	Road Restoration Chages forRoad Crossing
468	Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.44 Cmt (11 Meter - STP ) as per approved Drawing
469	Erection, Testingand commissioningof 11/0.433 KV three phase Transformer sub-station -25 KVA ,63 KVA and 100 KVA (Complete Work in all respect)
470	25 KVA , 11/0.433 KV T/F (Level-1 Self Protected Aluminium Wound Type)
471	63 KVA , 11/0.433 KV T/F (Level-1 Self Protected Aluminium Wound Type)
472	100 KVA , 11/0.433 KV T/F (Level-1 Self Protected Aluminium Wound Type)
473	8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification
474	Stone Pad (300x300x75mm)
475	GI Top channel 125x65x6 mm., 2240 mmlong
476	GI Channel 100x50x6 mm 2028 mm long (For Fuse Set )
477	GIangle 75x75x6x2028 mm with clamp &bolt and nut (T/F base)
478	Holding clamps for Top channel, GI Channel & GI Angle with bolts & nuts
479	Tee-off Channel 100x50x1300 mm with clamp, Nut & Bolt
480	Clamps for LT T-off with bolts & nuts
481	11 KV Polymer Disc Insulators45 KNT&C Type
482	11 KV Disc Fitting T & C type
483	11 KV Pin Insulator Polymer Type as per TS
484	11KV TPMO with fixing clamps
485	11KV Fuse Set (Drop out) with clamps
486	9 KV LA , 5 KA (Distribution Class)
487	LT Distribution Box withMCCB and AMI metering (Smart Meter compitable with System) equipment & fixing arrangement As per TS . (SMC Type) for 25KVA (DRG- no. REC/RDSS/DTR/SS/24)
488	LT incoming Panel with AMI metering (Smart Meter compitable with System DRG- no. REC/RDSS/DTR/SS/16) equipment & fixing arrangement As per TS . (SMC Type) for 63 KVA (DRG- no. REC/RDSS/DTR/SS/23)
489	LT incoming Panel with AMI metering (Smart Meter compitable with System DRG- no. REC/RDSS/DTR/SS/23) equipment & fixing arrangement As per TS . (SMC Type) for 100KVA (DRG- no. REC/RDSS/DTR/SS/23)
490	LT XLPE cable 4x16 Sq mm
491	LT XLPE cable 3.5x70 Sq mm
492	LT XLPE cable 3.5x150 Sq mm
493	11 KV Danger Board with Clamp and Nuts & Bolts
494	G.I. Barbed Wire
495	ACSR Rabbit Conductor -Jumpering Works
496	Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
497	HT Guy Insulator
498	GI Stay Wire 7/10 SWG
499	HT Stay Clamp as per approved drawing-11 KV
500	Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc.
501	GI Flat 25X3 for Earthing
502	Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing
503	Shifting , Erection, Testingand commissioningof Existing Distribution Transformer-25 KVA ,63 KVA and 100 KVA (Complete Work in all respect)
504	Dismentaling of 25 KVA Distribution Transformer along with accessories. Relocate the DT only at new location , Testing ,commissioning and charging and other material shifting to store.
505	Dismentaling of 63 KVA Distribution Transformer along with accessories. Relocate the DT only at new location , Testing ,commissioning and charging and other material shifting to store.
506	Dismentaling of 100 KVA Distribution Transformer along with accessories. Relocate the DT only at new location , Testing ,commissioning and charging and other material shifting to store.
507	8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification
508	Stone Pad (300x300x75mm)
509	GI Top channel 125x65x6 mm., 2240 mmlong
510	GI Channel 100x50x6 mm 2028 mm long (For Fuse Set )
511	GIangle 75x75x6x2028 mm with clamp &bolt and nut (T/F base)
512	Holding clamps for Top channel, GI Channel & GI Angle with bolts & nuts
513	Tee-off Channel 100x50x1300 mm with clamp, Nut & Bolt
514	Clamps for LT T-off with bolts & nuts
515	11 KV Polymer Disc Insulators45 KNT&C Type
516	11 KV Disc Fitting T & C type
517	11 KV Pin Insulator Polymer Type as per TS
518	11KV TPMO with fixing clamps
519	11KV Fuse Set (Drop out) with clamps
520	9 KV LA , 5 KA (Distribution Class)
521	LT Distribution Box withMCCB and AMI metering (Smart Meter compitable with System) equipment & fixing arrangement As per TS . (SMC Type) for 25KVA (DRG- no. REC/RDSS/DTR/SS/24)
522	LT incoming Panel with AMI metering (Smart Meter compitable with System DRG- no. REC/RDSS/DTR/SS/16) equipment & fixing arrangement As per TS . (SMC Type) for 63 KVA (DRG- no. REC/RDSS/DTR/SS/23)
523	LT incoming Panel with AMI metering (Smart Meter compitable with System DRG- no. REC/RDSS/DTR/SS/23) equipment & fixing arrangement As per TS . (SMC Type) for 100KVA (DRG- no. REC/RDSS/DTR/SS/23)
524	LT XLPE cable 4x16 Sq mm
525	LT XLPE cable 3.5x70 Sq mm
526	LT XLPE cable 3.5x150 Sq mm
527	11 KV Danger Board with Clamp and Nuts & Bolts
528	G.I. Barbed Wire
529	ACSR Rabbit Conductor -Jumpering Works
530	Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
531	HT Guy Insulator
532	GI Stay Wire 7/10 SWG
533	HT Stay Clamp as per approved drawing-11 KV
534	Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc.
535	GI Flat 25X3 for Earthing
536	Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing
537	Erection, Testingand commissioningof 11/0.250 KV single phase Transformer sub-station -10 KVA and 16 KVA (Complete Work in all respect)
538	10 KVA, 11KV/250 V, 1 Ph Transformer (Level-1 Self Protected Aluminium Wound Type)
539	16 KVA, 11KV/250 V, 1 Ph Transformer (Level-1 Self Protected Aluminium Wound Type)
540	LT Distribution Box withMCCB for protection of 10 KVA T/F and Bus Bar foroutgoing consumer connections with Energy Meter (SMC Type) as per TS. (DRG- no.REC/RDSS/DTR/SS/20 )
541	LT Distribution Box withMCCB for protection of 16 KVA T/F and Bus Bar foroutgoing consumer connections with Energy Meter (SMC Type) as per TS.( DRG- no. REC/RDSS/DTR/SS/20 )
542	Clamps for Dist. Box (40x6 mm)
543	Clamps for T/F (75x8 mm GI flat).
544	ACSR Weasel Conductor-Jumpering Works
545	11 KV Pin Insulator Polymer Type as per TS
546	Eye Bolt
547	L.T. XLPE cable 10 Sq. mm Single Core
548	Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc.
549	Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
550	HT Guy Insulator
551	GI Stay Wire 7/10 SWG
552	HT Stay Clamp as per approved drawing-11 KV
553	Shifting , Erection, Testingand commissioningof Existing Distribution Transformer-10 KVAand 16 KVA(Complete Work in all respect)
554	Dismentaling of 10 KVA Distribution Transformer along with accessories. Relocate the DT only at new location , Testing ,comissioning and charging and other material shifting to store.
555	Dismentaling of 16 KVA Distribution Transformer along with accessories. Relocate the DT only at new location , Testing ,comissioning and charging and other material shifting to store.
556	LT Distribution Box withMCCB for protection of 10 KVA T/F and Bus Bar foroutgoing consumer connections with Energy Meter (SMC Type) as per TS. (DRG- no.REC/RDSS/DTR/SS/20 )
557	LT Distribution Box withMCCB for protection of 16 KVA T/F and Bus Bar foroutgoing consumer connections with Energy Meter (SMC Type) as per TS.( DRG- no. REC/RDSS/DTR/SS/20 )
558	Clamps for Dist. Box (40x6 mm)
559	Clamps for T/F (75x8 mm GI flat).
560	ACSR Weasel Conductor-Jumpering Works
561	11 KV Pin Insulator Polymer Type as per TS
562	Eye Bolt
563	L.T. XLPE cable 10 Sq. mm Single Core
564	Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc.
565	Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
566	HT Guy Insulator
567	GI Stay Wire 7/10 SWG
568	HT Stay Clamp as per approved drawing-11 KV
569	Shifting , Erection, Testingand commissioningof Existing Distribution Transformer-250 KVA(Complete Work in all respect)
570	Dismentaling of Distribution Transformer along with accessories. Relocate the DT only at new location , Testing ,comissioning and charging and other material shifting to store.
571	11 Meter long STP as per Approved Drawing and Technical specification (SP-55)
572	GI Channel 100x50x6 mm 2028 mm long (For Fuse Set )
573	Holding clamps for Top channel, GI Channel & GI Angle with bolts & nuts
574	GI Top channel 125x65x6 mm., 2240 mmlong
575	GIangle 75x75x6x2028 mm with clamp &bolt and nut (T/F base)
576	GI Channel 75x75x6 mm &bolt and nut (T/F base Support)
577	11 KV Polymer Disc Insulators45 KNT&C Type
578	11 KV Disc Fitting T & C type
579	Tee-off Channel 100x50x1300 mm with clamp, Nut & Bolt
580	Clamps for LT T-off with bolts & nuts
581	11 KV Pin Insulator Polymer Type as per TS
582	11KV TPMO with fixing clamps
583	11KV Fuse Set (Drop out) with clamps
584	LT incoming Panel with AMI metering (Smart Meter compitable with System DRG- no. REC/RDSS/DTR/SS/23) equipment & fixing arrangement as per TS. (SMC Type) for 250KVA (DRG- no. REC/RDSS/DTR/SS/22)
585	Copper L-Piece 50x225x10mm
586	Copper L-Piece 50x225x12mm
587	LT XLPE cable 3.5x400 Sq mm
588	Al Lug long barrel off size
589	11 KV Danger Board with Clamp and Nuts & Bolts
590	G.I. Barbed Wire
591	Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
592	HT Guy Insulator
593	GI Stay Wire 7/10 SWG
594	HT Stay Clamp as per approved drawing-11 KV
595	Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc.
596	GI Flat 50X6 for Earthing
597	GI Channel 125x65 mm
598	9 KV LA , 5 KA (Distribution Class)
599	Crimping type heavy duty aluminium lugs suitable for connection XLPE cables
600	PG Clamp for Rabbit
601	Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.44 Cmt (11 Meter - STP ) as per approved Drawing
602	DT\"s Plinth Foundation
603	Erection, Testingand commissioning of New LT Line With AB Cable(Complete Work in all respect)
604	8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification
605	Stone Pad (300x300x75mm)
606	Aerial Bunched XLPE Cable 1X16 (Ph) + 1X25 ( Bare messenger cum neutral) sqmm
607	Aerial Bunched XLPE Cable 3X50 (Ph) + 1X35 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm
608	Aerial Bunched XLPE Cable 3X95 (Ph) + 1X70 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm
609	Pole Clamps with with I-Hook & nut & bolts for laying ABC
610	Dead End clamp (Insulated)
611	Suspension clamps (Insulated)
612	End Cap for AB cable
613	PG Clamps 16 Sq mm .- 50 sq mm (For line to line jumpering of massenger wire & energizing DB Neutral)
614	Insulating Piercing Connector (16-150 sq.mm)
615	1x25 mm2 Un-armoured XLPE insulated Al. LT Cable for energising the distribution boxes.
616	Single phase Glass Fiber Reinforced Polyester Sheet Moulding Compound (SMC) Pole top distribution box with clamps (40x3 mm) and nut & bolts
617	Three phase Glass Fiber Reinforced Polyester Sheet Moulding Compound (SMC)Pole top distribution box with clamps (40x3 mm) and nut & bolts
618	Earthing Coil connected with nutbolt using Charchol and Salt
619	Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
620	LT Guy Insulator
621	GI Stay Wire 7/10 SWG
622	LT Stay Clamp as per approved drawing
623	Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing
624	Erection, Testingand commissioning of 11KV Line Guarding (Complete Work in all respect)
625	Guarding angle 65x55x6 mm, 1.6 mtr. With Clamp
626	Height raising channel 100x50,2240 mm long
627	Back clamp for Height raising channel holding clamps with bolts & nuts
628	G.I. Wire 6 SWG
629	G.I. Wire 8 SWG
630	Turn Buckle
631	Eye Bolt
632	G.I. Wire No. 16 SWG for binding
633	Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc.
634	Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
635	HT Guy Insulator
636	GI Stay Wire 7/10 SWG
637	HT Stay Clamp as per approved drawing-11 KV
638	Erection, Testingand commissioning of Tee Of Channel (Complete Work in all respect)
639	Tee-off Channel 100x50x1300 mm with clamp, Nut & Bolt
640	GI Channel clamp with nuts & bolts
641	11 KV Polymer Disc Insulators45 KNT&C Type
642	11 KV Disc Fitting T & C type
643	11 KV Pin Insulator Polymer Type as per TS
644	PG Clamp for Rabbit
645	Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
646	HT Guy Insulator
647	GI Stay Wire 7/10 SWG
648	HT Stay Clamp as per approved drawing-11 KV
649	Installation of Sign Board with as per TS and Approved Drawing
650	Sign Board as per TS and Approved Drawing
651	Control Room Building Extention work (Complete Work in all respect)
652	RCC Work of Building with Internal wiring works for Extension of Control room Building (36 Sqmtr) (Complete Works in all respect) as per approved drawing and specification
653	Water pump, Toilet works as per approved drawing and specification

Also Visit

Tenders

Uttar Pradesh Tenders

Power Generation and Transmission Tenders

Power Transmission Tenders

Power Distribution Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Development Of Distribution Infrastructure At Agra-1 Zone(Electricity Distribution Circlesedc Fatehabadedc Mainpuri, Edc Firozabad , Eudc Firozabad), District Agra,Mainpuri & Firozabadofuttar Pradeshstate Under The Revamped Reforms-Based And Re, Agra-Uttar Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Development Of Distribution Infrastructure At Agra-1 Zone(Electricity Distribution Circlesedc Fatehabadedc Mainpuri, Edc Firozabad , Eudc Firozabad), District Agra,Mainpuri & Firozabadofuttar Pradeshstate Under The Revamped Reforms-Based And Re, Agra-Uttar Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us