Ordnance Factory-OF has published Tender For Repairing/Replacement Of Damaged Ms Fire Fighting/Process Water Pipe Line At Different Location Inside Factory Area At O F Badmal.. Submission Date for this Tender is 19-12-2022. Water Pipe Line Tenders in badmal Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Cat (A) -Items to be supply and fixing |
| 2 | Site Clearance (Clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots, and trees not exceeding 30 cm girth (measured one metre above ground level) and removing rubbish upto a distance of 50 metres outside the periphery of the area under clearance) over soft or loose soil as per the direction of Engineer-In-Charge. |
| 3 | Dismantling wrought iron or mild steel work of any description not otherwise provided as per the direction of Engineer-In-Charge. |
| 4 | S & F ofMS ERW (Mild Steel Electric Resistance Welded) pipe for 200 mm NB (Nominal Bore) confirming to IS:3589 includiung fabrication & erection complete with support, fittings bend, tees, flanges and all necessary accessories.The thicknes of the pipe shall be minimum 6 mm as per IS:3589 .Fabrication and erection shall include cutting the pipe to required size, bevelled edge cutting, bending of pipe and welding of pipe etc. complete as per the direction of Engineer-In-Charge. MS Pipes of Make: SAIL / JINDAL / TATA / ZENITH / SURYA PRAKASH. |
| 5 | S & F ofMS ERW (Mild Steel Electric Resistance Welded) pipe for 250 mm NB (Nominal Bore) confirming to IS:3589 includiung fabrication & erection complete with support, fittings bend, tees, flanges and all necessary accessories.The thicknes of the pipe shall be minimum 6 mm as per IS:3589 .Fabrication and erection shall include cutting the pipe to required size, bevelled edge cutting, bending of pipe and welding of pipe etc. complete as per the direction of Engineer-In-Charge. MS Pipes of Make: SAIL / JINDAL / TATA / ZENITH / SURYA PRAKASH. |
| 6 | S & F ofMS ERW (Mild Steel Electric Resistance Welded) pipe for 150 mm NB (Nominal Bore) confirming to IS:3589 includiung fabrication & erection complete with support, fittings bend, tees, flanges and all necessary accessories.The thicknes of the pipe shall be minimum 6 mm as per IS:3589 .Fabrication and erection shall include cutting the pipe to required size, bevelled edge cutting, bending of pipe and welding of pipe etc. complete as per the direction of Engineer-In-Charge. MS Pipes of Make: SAIL / JINDAL / TATA / ZENITH / SURYA PRAKASH. |
| 7 | APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. Not less than 150 gms/sqm) land on primed surface by forced application complete all as specifiedas per the direction of Engineer-In-Charge. |
| 8 | Preparation of new or previouly un treated surfaces and applying one coat of red oxide and two coat of syenthiec enamel pait, over 10cm in width or girth,nototherwise described as per the direction of Engineer-In-Charge. |
| 9 | Excavating in trenches, n exc 1.5 m wide and n excl.5 m in depth; for foundation, etc. Or for shafts, wells, cesspitsl manholes, pier holes, etc. nexc 10 sq m. on plan and n exc 1.5 m in depth and getting out in soft/loose soil as per the direction of Engineer-In-Charge. |
| 10 | Returning, filling in , including spreading, levelling, watering & well ramming in layers not exceeding 25cm in hard/ dense soil as per the direction of Engineer-In-Charge. |
| 11 | Demolition of cement concrete (unreinforced) ofany description andin any position not otherwisespecifically provided for as per direction of E - I - C. . |
| 12 | M&L for Sand filling under floors or in foundations including watering and consolidation as per the direction of Engineer-In-Charge. |
| 13 | M & L forcement concreteType C2(1:3:6 ) 40mm graded aggregate cement concrete in foundation filling and mass concrete as per the direction of Engineer-In-Charge. . |
| 14 | M & L forP.C.C Type-I Grade M15 (1:2:4 ) mix using 20 mm graded aggregateas per the direction of Engineer-In-Charge.. |
| 15 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions and rough finish surfaces of concrete square, rectangular or polygonalas per the direction of Engineer-In-Charge. |
| 16 | M & L for Reinforced cement concrete (nominal mix) type B1 ( 1:2:4) 20mm graded aggregate mixin Columns, pillars, piers, posts and struts as per the direction of Engineer-In-Charge. |
| 17 | M & L for mild steel TMTbars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as per the direction of Engineer-In-Charge. . |
| 18 | Cat (B) - Buy Back Items (ie minus) |
| 19 | Buy-Back (ie minus)The dismantled wrought iron or mild steel MS pipe line is to be credited to the Contractor. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
