Tender For Construction Of Khudiram Basu English Medium School At Old Central Jail Road Agartala West Tripura 3Rd Call
Tender Value
2.09 Crore
Estimated cost
Bid Submission
12 Dec 2022
0 days left
EMD
4.19 Lakhs
Bank guarantee accepted
Document Fee
8000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
agartala → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Khudiram Basu English Medium School At Old Central Jail Road Agartala West Tripura 3Rd Call Construction Of Khudiram Basu English Medium School At Old Central Jail Road Agartala West Sh Acr Science Laboratory Library Computer Room Toilet And Boundary Wall Including Water Supply And Sanitary Installation Under Vidyajyoti Schools
BOQ
| Sl. No. | Item Description |
| 1 | A) SH: EARTH WORK Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (i) All kinds of soil . |
| 2 | Earthwork in excavation in all kind of soil and filling in plinth, ground depression,pond etc. with available excavated suitable soil in regularhorizontal layer each not exceeding 20 cm in depth, breaking clods and consolidating each layer by watering and ramming with 1/2 ton roller or wooden or steel rammer etc. including carriage of earth by mechanical transport from a distance of 8 km as per direction of the Engineer-incharge.(Earth to be arranged by the contractor at his own cost and risk). |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (i) All kinds of soil . |
| 4 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete |
| 5 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 6 | B) SH: CEMENT CONCRETE WORK Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -.(A) All work upto plinth level. (i) 1 : 4 : 8 ( 1 cement : 4 fine sand : 8 graded well burnt brickaggregate of 40 mm nominal size) . |
| 7 | (ii) 1 : 3 : 6 ( 1 cement : 3 fine sand : 6 graded well burnt brickaggregate of 20 mm nominal size) . |
| 8 | C) SH : REINFORCED CEMENT CONCRETE WORK Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- All work upto plinth level: (i) 1:1.5:3 ( 1 Cement: 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | ii) 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mmnominal size) |
| 10 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement- (i) 1:1.5:3 ( 1 Cement: 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement- (i) 1:1.5:3 ( 1 Cement: 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 12 | Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with (i) 1:1.5:3 ( 1 Cement: 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 13 | Centering shuttering including struttings, propping etc. and removal of form work for:(i) Foundations, footings, bases for columns etc. for mass concrete with timber plank |
| 14 | (ii) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. using shuttering ply |
| 15 | (iii) Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank |
| 16 | iv) Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply |
| 17 | v) Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply |
| 18 | (vi) Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply |
| 19 | vii) Stairs (excluding landings) except spiral-staircases with wooden plank |
| 20 | viii) Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards. |
| 21 | ix)Weather shade, Chajjas, corbels etc., including edges |
| 22 | Supplying and fitting fixing pre cast cement concrete post 1:1.5:3 (1 cement :1.5 river sand: 3 stone aggregate 6mm nominal size) 100X 100 mm square at end circular pattern in middle 600 mm long reinforced with 1 No 6mm Cold twisted bar complete,as directed by the Eng-in charge. |
| 23 | Providing precast cement concrete Jali 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits (i) 40 mm thick. |
| 24 | Providing and fixing sheet covering over expansion joints with iron screws as per design to match the colour /shade of wall treatment (i) Aluminium fluted strips 3.15mm thick : 200 mm wide |
| 25 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (i) Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 26 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor five level. (i) Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 27 | (D) SH : BRICK WORK First class brick work in foundation and plinth including cost of all materials as required complete:- (i) In Cement mortar 1:6 ( 1 cement : 6 fine sand ) |
| 28 | First class brick work in supersrutureincluding cost of all materials as required complete:- (i) In Cement mortar 1:6 ( 1 cement : 6 fine sand ) |
| 29 | Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- (i) In Cement mortar 1:6 ( 1 cement : 6 fine sand ) |
| 30 | Moulding and cornices with first class brick masonry, girth to be measured in centimetre and length in metre in superstructure for all level including cost of all materials as required complete:- (i) In cement mortar 1:5 ( 1 cement : 5 fine sand ). |
| 31 | (E) SH :WOOD& P.V.C.WORK Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. (i) Fixed to openings /wooden frames with rawl plugs screws etc. |
| 32 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutte (i) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 33 | Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60mm width & 30mm thickness and shall be fixed to wall as per instructions of Engineer-In-Charge using 100x8 sheet metal CSK screws. |
| 34 | Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI ‘C sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric ‘L’ corners .The panel shall be filled with 3mm thick high - pressure compact laminate as per manufacturer’s specifications and directions of the Engineer-in- charge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter |
| 35 | Providing and fixing ISI marked oxidised M.S.sliding door bolts with nuts and screws etc. Complete (i) 300 X 16 mm. |
| 36 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : (i) 250x10 mm |
| 37 | ii) 150 x 10 mm |
| 38 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : (i) 125 mm |
| 39 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. (i)Twin rubber stopper |
| 40 | (F) SH :STEEL WORK Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 41 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm at 100 mm centre to centre and braced with flat irondiagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia. steel pulleys & with riveted bolts, nuts, locking arrangement,stoppers, handles, hold fast /anchor bolt including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete asrequired. |
| 42 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, & with cleats with bolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat ofapproved steel primer etc. complete as requiredi) Using flats 30x6mm for diagonal braces and central cross piece. |
| 43 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. (i) Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 44 | Providing and fixing fan clamp type-I of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying including painting the exposed portion of loop, all as per standard design complete. |
| 45 | (G)SH : FLOORING Providing and fixing Marble stone in floors over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with of matching shade, including rubbing and polishingcomplete. (A) 14 mm thick Marble stone . (i) Agaria white marble |
| 46 | Extra for prefinished nosing to treads of steps of marble stone. |
| 47 | Extra for marble flooring complete in treads of steps and risers using single length upto 2.00 metre. |
| 48 | Providing and fixing Kota stone in floors over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with ordinary cement mixed with pigment of matching shade, including rubbing and polishingcomplete. (i)Kota stone slab 25mm thick |
| 49 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 - 2017, of approved make, in all colours and shades,laid over 20mm thick cement mortar 1:4 (1 cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (A) Double charged Stainfree vitrified tiles (i) Size of tile 60x60 cm |
| 50 | Providing and laying ceramic floor tiles in different sizes (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 - 2017 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid over 20 mm thick cement mortar 1:4 (1 cement : 4 fine sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. (i) Mat Finish Tiles (i) Ceramic Tiles 1st quality 300 x 300mm in all shades and designs |
| 51 | Providing and fixing 1st quality ceramic glazed wall tiles (minimum 200 x 300) conforming to IS : 15622 - 2017 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. |
| 52 | Providing and fixing chequered terrazo tiles 22 mm thick with graded marble chips of size upto 6 mm, laid on floors, footpath & courtyard on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete. (i) Light shade pigment using white cement |
| 53 | (H) SH : ALUMINIUM WORK & STRUCTURAL GLAZING Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling and dash fasteners to be paid for separately)(A) For fixed portion of approved quality:- (i) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). |
| 54 | B) For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber / neoprene gasket required ( Fittings shall be paid for separately ):- (i) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). |
| 55 | Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :- (i) With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm ) |
| 56 | (ii) With float glass panes of 5.5 mm thickness ( weight not less than 13.50 kg / sqm ) |
| 57 | Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. of approved quality complete as per direction of Engineer-in-charge:- (i)Anodised aluminium of grade AC 15 ). |
| 58 | (I) SH : FINISHING WORK 12 mm cement plaster of mix (i) In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) |
| 59 | ii) Cement mortar 1:6 ( 1 cement : 6 fine sand ) |
| 60 | 15 mm cement plaster on the rough side of single or half brick wall of mix: (i) In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) |
| 61 | ii) Cement mortar 1:6 ( 1 cement : 6 fine sand ) |
| 62 | 6 mm cement plaster of mix : (i) Cement mortar 1:3 ( 1 cement : 3 fine sand ) |
| 63 | Neat cement punning |
| 64 | 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand): (i) Moulded Band |
| 65 | Pointing on brick work or brick flooring with cement mortar 1:3 ( 1 cement : 3 fine sand ) complete. (i) Raised and cut Pointing |
| 66 | Applying priming coat [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : (i) With ready mixed Pink or Grey primer of approved brand and manufacture on wood work ( hard & soft wood ). |
| 67 | ii)With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel , galvanised iron / steel work. |
| 68 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: (i) Two or more coats on new work |
| 69 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : (i)New work ( two or more coats) over and including water thinnable priming coat with cement primer. |
| 70 | Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : (i) New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm |
| 71 | Painting on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint ( two or more coats ) of required colour of approved brand and manufacture to give an even shade on new work over and including a priming coat of approved steel primer complete. (i) 110mm |
| 72 | (J) SH : SANITARY INSTALLATIONS Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : (i) White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 73 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : (i) W.C. pan with ISI marked white solid plastic seat and lid |
| 74 | Providing and Fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizesrespectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, includingpainting of fittings and brackets, cutting and making good the walls and floors herever required : (i) One urinal basin with 5 litre white P.V.C. automatic flushing cistern. |
| 75 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting offittings and brackets, cutting and making good the walls wherever require : (i) White Vitreous China Flat back wash basin size 450x300 mm withsingle 15 mm C.P. brass pillar tap |
| 76 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required (i) Size 600x450x200mm |
| 77 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 78 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (A) Semi rigid pipe (i) 32 mm dia |
| 79 | Providing and fixing 100 mm sand cast Iron grating for gully trap. |
| 80 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 81 | Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 82 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved 450mm long towel rail with total length of 495mm, 78mm wide and effective height quality and colour. (i) 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. |
| 83 | Providing and fixing soil, waste and vent pipes: (A) 100 mm dia. (i)Sand cast iron S&S pipe as per IS: 1729 |
| 84 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/ cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : (i) For 100 mm dia. Pipe |
| 85 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. (A) 100 mm (i)Sand cast iron S&S as per IS - 1729 |
| 86 | Providing and fixing plain bend of required degree. (A) 100 mm . (i) Sand cast iron S&S as per IS - 1729 |
| 87 | Providing and fixing heel rest sanitary bend(A) 100 mm dia (i) Sand cast iron S&S as per IS - 1729 |
| 88 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. (A) 100x100x100 mm . (i)Sand cast iron S&S as per IS - 1729 |
| 89 | Providing and fixing collar: (A) 100 mm (i)Sand cast iron S&S as per IS - 1729 |
| 90 | Providing and fixing terminal guard: (A)100 mm (i) Sand cast iron S&S as per IS - 1729 |
| 91 | Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size ) including necessary plaster and pointing in cement mortar 1:4(1cement: 4 coarse sand): i) 100mmdia. |
| 92 | Providing and fixing on wall face unplasticised Rigid PVC rain water, soil, waste & vent pipes (working pressure 4 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: (i) Single socketed pipe - 75 mm OD |
| 93 | ii) Single socketed pipe - 110 mm OD |
| 94 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water, soil, waste & vent pipes pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:(A) Coupler (i) 75 mm |
| 95 | (ii) 110 mm |
| 96 | (B) Bend 87.5\" (i) 75 mm |
| 97 | (ii) 110 mm |
| 98 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand)making good the wall etc. complete. (i) 110mm |
| 99 | (ii) 75mm |
| 100 | Providing and fixing to the inlet mouth of rain water, soil, waste & vent pipes pipe PTMT grating with thickness of 8mm and weighing not less than 100gm. (i) 100mm |
| 101 | (K) SH : WATER SUPPLYProviding and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.(i) 15 mm nominal bore. |
| 102 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (i) 15 mm nominal bore |
| 103 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 (i) 15 mm nominal bore |
| 104 | Providing and fixing G.I pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings and clamps, including making goodthe walls/floor etc. concealed pipe including painting two coats or more with anticorrosive bitumastic paint, cutting chases and making good the same complete as per CPWD specification and direction of the Engineer - in - charge. (i) 15 mm dia nominal bore |
| 105 | (ii) 20 mm dia nominal bore |
| 106 | Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings and clamps, including cutting andmaking good the walls etc. complete as per CPWD specification and direction of the Engineer - in charge Internal work - Exposed on wall. (i) 20 mm dia. nominal bore |
| 107 | Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling etc.complete as per CPWD specification and direction of the Engineer - in - charge. External works.(i) 25 mm nominal bore |
| 108 | (ii) 40 mm nominal bore |
| 109 | Making connection of G.I. distribution branch with G.I. main following sizes by providing and fixing tee, including cutting and threading the pipe etc.complete as per CPWD specification and direction of the Engineer - in - charge (i) 25 to 40 mm nominal bore |
| 110 | Providing and fixing uplasticised PVC connection pipe with brass unions : (A) 45 cm length (i) 15 mm nominal bore |
| 111 | Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : (i) 20 mm diameter pipe |
| 112 | (ii) 25 mm diameter pipe |
| 113 | (iii) 40mm diameter pipe |
| 114 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete as per CPWD specification and direction of the Engineer - in - charge.(New work) (i) 25 mm nominal bore |
| 115 | (ii) 40 mm nominal bore |
| 116 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 117 | (L) SH : WATER PROOFING AND REHABILITATIONWORK Grading roof for water proofing treatment [Payment shall be made aftersubmission of the product performance shall carry guaranteed for 7 years against any leakage] complete as required as per direction of the Engineer-incharge with : (i) Cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size) |
| 118 | Providing and applying Super Latex (SBR based ) or equivalent water proofing coating over R.C.C slab with 3 components by mixing 1 : 4 : 7 ( 1 Super Latex or equivalent : 4 water : 7 Cement ) ratio as per manufacturer recommendation including cleaning the roof surface with wire brushing and clean water before applying and curing the chemicals by sprinkling water for 3 to 5 days after application of water proofing compound complete as per direction of the Engineer - In - charge and technical instruction of the manufacturer. |
| 119 | (M) SH: DISMANTLING & DEMOLISHING Demolishing sand grading manually / by mechanical means including disposal of material with all lifts and upto 50 m lead etc. complete as per direction of the Engineer- in-charge:-(i) Sand cement mortar 1 : 3 or leaner mix . |
| 120 | Demolishing reinforced cement concrete manually / by mechanical means including stacking of steel bars properly and disposal of unserviceablematerial with all lifts and upto 50 m lead etc. complete as per direction of the Engineer- in-charge. |
| 121 | Dismantling GS sheet roofing including ridges, hips, valleys, gutters wind ties etc. including dismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc.complete as per direction of the Engineer- in-charge. |
| 122 | Labour charge for fitting fixing of old serviceable GS sheet roofings including rafters, purlins, ridges, hips, valleys, gutters wind ties etc. with all lifts and lead as per direction of the Engineer -in-charge. |
| 123 | Demolishing brick work including stacking of serviceable materials and disposal of unserviceable materials with all lifts and upto a lead of 50m etc. complete as per direction of the Engineer- in-charge: In cement mortar. |
| 124 | Demolishing cement concrete manually / by mechanical means including disposal of material with all lifts and upto 50 m lead etc. complete as per direction of the Engineer- in-charge:-i) Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 125 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. (i) For thickness of tiles 10 mm to 25 mm |
AI Tender Summary
Tender Timeline
Nov 23, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedDec 12, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 12, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender