Tender For Construction Of Health Sub-Center, Tihara Block-Rudhauli Distt Basti
Tender Value
23.36 Lakhs
Estimated cost
Bid Submission
30 Nov 2022
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
8260
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
rudhauli → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Health Sub-Center, Tihara Block-Rudhauli Distt Basti
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-Nov-2022 | Date | Date | 30-Nov-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in exacavation in foundations in ordinary soil (loam clay or sand) including lift upto 1.5 m and lead upto 30 mt. & including filling, watering and ramming of excavated earth into the trenches or into the space between building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the E/I upto a distance of 30 mt. from the foundation trenches. |
| 2 | Filling By carted earthin trenches, plinth, sides of foundation, campus etc. in layers not exceeding 20 cms in depth, consolidating each deposited layer by ramming and watering including lead upto 50 m & lift upto 1.50 m. |
| 3 | Providing and laying in cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone ballast 40 mm nominal size) and curing complete, including cost of form- work, in foundation. |
| 4 | Sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand. |
| 5 | Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the coloumn pitswall tench basement excavation top surface if plinth filling junction of wall and floor along the external perimer of binding expansion joints,surrounding of pipes and conduits etc.complete(plinth area of the building at ground floor only shall be measuredas per I.S.6313(Part ll 1981) aldrine emulsifiable concrete or any other approved material such as hepthachlor or chlordance will be used.The rate of application of chemical emulsion shall be as follows:- |
| 6 | (1)treatment for masonary & foundation 5 litres per sq.m.(2)back fill in immediate contract with foundation 7.5 litre per sq.m(3)treatment of top surface of plinth filling 5 liters per sq.m.(4)treatment of soil along external parameter of building 7.50 lire per sqm. (For payment plinth area to be measured as per IS Code). |
| 7 | R.C.C. work with cement approved coarse sand & 20 mm guage approved stone grit in the proportion of 1:1.5:3 in lintels of doors, windows excluding supply of reinforcement & its fixing, binding the same with 24 BWG binding wire & including necessary centering, shuttering etc. & also including supply of all materials, labour, T & P etc. required for proper completion of the works. strength of the concrete shall not beless than M-20. |
| 8 | As in item no. 6 above but for slabs (Using 1:1.5:3 Mix concrete) |
| 9 | As in item 6 but for thelighterbeams i.e. having spans upto 6 m. (Using 1:1.5:3 Mix concrete) |
| 10 | Class-150 brick work in 1:6 cementand Coarse sandmortar in foundation and plinth including supply of all materials, labour tools and plants, etc. Required for proper completetion of the work. |
| 11 | Class-150 brick work in 1:6 cementand Coarse sandmortar in SUPERSTRUCTURE including supply of all materials, labour tools and plants, etc. Required for proper completetion of the work |
| 12 | Class-150 HALF brick work in 1:4 cementand COARSE sandmortar in SUPER STRUCTURE including supply of all materials, labour tools and plants, etc. Required for proper completetion of the work. |
| 13 | Paintingon D.P.C. with two coats of air blown bitumen 85/50 or 85/25 @ 1.7kg/sqm approxincluding cost of fuel if any. |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level & above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 15 | 15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 sand |
| 16 | 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or roundedangles not exceeding 80mm in girth and finished even and smooth. (1) 1 cement : 6sand |
| 17 | 15mm thick plaster in 1:4 (cement & coarse sand) in plinth. |
| 18 | Making grooves 10 to 12 mm wide x 8 mm deep in plaster the all or in ceiling vertically of horizontally as required. |
| 19 | Providing and laying 6 to 8 mm thick vitrified tiles infloor and skirting in different sizes with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm (Floor) |
| 20 | Providing and laying 6 to 8 mm thick vitrified tiles infloor and skirting in different sizes with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm (Dado) |
| 21 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1stquality conforming to IS : 15622, of approved make, in colours White,Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4(1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 22 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
| 23 | Granite of any colour and shade (Area of slab over 0.50 sqm) |
| 24 | Supply and fixing 6mm thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approoved course sand mortar finished with white cement slurry jointing and polishing complete including supply of all material and tools and plant etc. required for proper completion of the work. (Floor) |
| 25 | Supply and fixing 6mm thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approoved course sand mortar finished with white cement slurry jointing and polishing complete including supply of all material and tools and plant etc. required for proper completion of the work.(Dado) |
| 26 | Providing & fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood & well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 27 | Single leaf |
| 28 | Double leaf |
| 29 | Fabrication and supply & fixing of mild steel grill as per design including the stair case railings etc. with square and round bars, M.S. angle iron., T-iron, M.S. Flats as directed by the EI. Supply of all steel and its wastage, cutting & drilling holes and welding where necessary including each joint to be perfectly welded and joined including supply of all materials, Nuts, bolts, labour, tool & plants etc. and also including special machinery such as drilling of welding grinding plants etc. as required for proper completion of the work and applying a coat of red lead paint over the entire area. |
| 30 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 31 | M.S. or Iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work. Z-Section steel windows (openable) |
| 32 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. |
| 33 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) |
| 34 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 35 | Providing and fixing ISI markedS.S. sliding door bolts with nuts and screws etc. complete : |
| 36 | (a) 250mm x 16mm |
| 37 | Providing and fixing ISI markedS.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : |
| 38 | (a) 250 mm x 10mm |
| 39 | Providing and fixing ISI markedS.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm |
| 40 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) |
| 41 | Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3 apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. |
| 42 | Same as item above but on new wood surface. |
| 43 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : (a) 4 mm thick. |
| 44 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
| 45 | W.C. pan with ISI marked white solid plastic seat and lid |
| 46 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 47 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. |
| 48 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : |
| 49 | Size 450x300x150 mm |
| 50 | Providing and fixing C.P.brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 (including angle valve for WC flushing cistern, jet & kitchen sink) |
| 51 | 15 mm nominal bore |
| 52 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 53 | 45 cm length |
| 54 | 15 mm nominal bore |
| 55 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : |
| 56 | 100 mm diameter |
| 57 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 58 | 15 mm nominal bore |
| 59 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: |
| 60 | White glazed fire clay kitchen sink of size 600x450x 250 mm |
| 61 | Providing & fixing PVC waste pipe for sink including PVC waste fittings Complete |
| 62 | Flexible Pipe |
| 63 | 32mm Dia |
| 64 | Providing and fixing mirror of superior glass (of approved quality) andof required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm |
| 65 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 66 | 15 mm nominal bore, 165 mm long, weighing not less than 110 gms |
| 67 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 68 | Concealed work, including cutting chases and making good the walls etc. |
| 69 | For Internal Toilet |
| 70 | 15 mm nominal outer dia Pipes |
| 71 | 20 mm nominal outer dia Pipes |
| 72 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 73 | Internal work - Exposed on wall |
| 74 | 20 mm nominal bore |
| 75 | 25 mm nominal bore |
| 76 | 32 mm nominal bore |
| 77 | Providing and fixing brass stop cock of approved quality : |
| 78 | For Internal Toilet |
| 79 | 20 mm nominal bore |
| 80 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 81 | For vertical pipe connection with terrace ringmain |
| 82 | 32mm nominal bore |
| 83 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 84 | Providing and fixing 100 mm diameter and 60 cm long rain water spout in cement mortar 1:4 (1 cement : 4 fine sand) For Campus Boundary. |
| 85 | Stone ware spout |
| 86 | Providing, fixing, jointing and testing,uPVCSWR pipes8 kg/sqcm , - type B conforming to IS : 4985to wall, ceiling and floor, approved quality, complete, for soil, waste & rain water drain including pushfit jointing with seal ring. (i) Single socketed pipes. |
| 87 | Internal Toilet (Soil & Waste Pipe) |
| 88 | 75 mm |
| 89 | 110 mm |
| 90 | Providing and fixing plain bend of required degree. |
| 91 | 110mm bend |
| 92 | Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. |
| 93 | 100mm |
| 94 | 75mm |
| 95 | Providing and fixing heel rest sanitary bend |
| 96 | 75mm |
| 97 | Providing & fixingcast iron coller. |
| 98 | 110mm |
| 99 | Providing, fixing, jointing and testing , ofPVC NahaniTrap without jali ofminimum 50 mm water seal, making necessarycuttingin slabor floors and making goodincluding supports with cement concrete 1:3:6complete as approved by Engineer-in-Charge. |
| 100 | 110mm x 75mm (Toilet) |
| 101 | 110mm x 75mm (Kitchen) |
| 102 | Providing and fixing PTMT grating of approved quality and colour. |
| 103 | Rectangular type with openable circular lid |
| 104 | 150 mm nominal size square 100 mm diameter of the inner hinged round grating (including balcony) |
| 105 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : |
| 106 | 150 x 100mm size P-type |
| 107 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 108 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete: |
| 109 | 100 mm diameter |
| 110 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W.pipes including bed concrete as per standard design: |
| 111 | 100mm dia SWpipe |
| 112 | Providing and laying NonpressureNP 2 class (light duty) RCC pipe with collars jointed withstiffmixtureofcement mortar in the proportion of 1:2 (1cement : 2 finesand ) includingtestingof joints etc. complete. |
| 113 | 150 mm.dia. RCCPipes |
| 114 | Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design |
| 115 | 150 mm. dia. |
| 116 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : |
| 117 | Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : |
| 118 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 119 | ELECTRICAL WORK |
| 120 | Wiring points for light with 1.5 sqmm.FRLSH PVC insulated single core Copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FRLSH PVC insulated multistrand copper conductor cable as |
| 121 | earth continuity wire and piano type switch etc. complete in all respects. |
| 122 | Same as item No. (1) but for fanandlight duty exhaust fan. |
| 123 | Same as item No.(1) but for5 amp plug point with piano type switch and socket etc. |
| 124 | Addition when modular type switches etc are used in place of piono type switches etc. in various wiring points. |
| 125 | Addition for light / fan points with modular type switchin place of piono type switch. |
| 126 | Addition for plugpointswith modular type switchin place of piono type switch. |
| 127 | Addition for Exhaust fanpointswith modular type switchin place of piono type switch. |
| 128 | Supply and fixing of power plug with 15A/250 V flush type switch and 5 Pin 15 A/250V flush type universal socket in suitable M.S. box of 175mmx100x50mm size with phenolic laminated bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer. |
| 129 | Supply and fixing of power plug with 20A/250 V flush type switch and 5 Pin 20 A/250V flush type universal socket in suitable M.S. box including supply of all material, labor T&P etc. required for proper completion of work. |
| 130 | Supply & wiring of submains with 2 nos. 2.5 sq.mm & with 1 no. earth wire of 1.5 sq.mm FR PVC insulated 1100 V grade single core multistrand copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit complete, including supply of all material, labourand T&P etc. required for proper completion of the work as directed by Engineer I/C. |
| 131 | Supply and wiring of submain 2 number 4 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty( 2 mm thick ) 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FRLSH PVC insulated multistranded copper conductor |
| 132 | cable as earth contunity wire etc. complete in all respects. |
| 133 | Supply and wiring of submain 2 number 6 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty( 2 mm thick ) 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 4 sqmm FRLSH PVC insulated multistranded copper conductor |
| 134 | cable as earth contunity wire etc. complete in all respects. |
| 135 | Supplyfixingand concealing of20mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work( forTelephone) |
| 136 | Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. Pipe 19mm dia duly painted, complete in all respects. |
| 137 | Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects. |
| 138 | Supply and fixing hexagonal/Round G.P. fan box of approved make made up of 1.0mm thick ISI Marked G.P. sheet spot weeldeed Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5mm G.P. Sheet made upper & lower cover duly screewed fitted with 300mm round zink coted M.S Bar X 12mm & brand name should be embossed.Fixing with wiring conduit laid in the R.C.C roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of work. |
| 139 | Supply of Ceiling Fan with fan motor of A.C Permanent insulation, capacitor rating conforming BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment. The rated voltage 220/240 volts, 50Hz, 1-ph AC the fan assemble should consists of down road blades, shackle canopies etc and with double ball bearing system. |
| 140 | BEE 5 Star rated-1200mm sweep |
| 141 | Supplyfixingofelectronic fan regulator 120-280 V. ISImarked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work. |
| 142 | Supply & fixing of LED Tube Light with Metal heavy dutyBox type batten Light fitting 1 x 22 watt suitable for up to 1 x 22 watt LED Polycarbonate tube light complete including tube etc suitable for both surface & surface complete in all respects.(CAT: AAA) |
| 143 | Supply and fixing of recess/ Surface/ Pendent mounting round 6 Watt 8 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.CAT- AAA |
| 144 | Suuply and fixing of water tight oblong 10 watt LED bulkhead luminaire with driverr set confirming to IP 65 and above Protection complete in all respect.(CAT: AAA) |
| 145 | NON SCH. |
| 146 | Suuply and fixing of 17 watt LED Mirror Light and complete in all respect. |
| 147 | SUBHEAD III-DISTIBUTION BOARD |
| 148 | Supply and fixing of surface/flush mounting distribution boards with additional metal door withot MCB complete in all respects.(CAT A) |
| 149 | 12 Way SPN |
| 150 | 12 Way TPN |
| 151 | Supply and fixing of 6Amp to 32 Amp (10 KA)SP MCB in existing MCB, DB complete with connections as required. (CAT: A) |
| 152 | Supply fixing and making connection of following MCBS complete in all respects as per direction and satisfaction of engineer-in-charge.(CAT: A) |
| 153 | 63 Amp. FP MCB(CAT: A) |
| 154 | 6 Amp. to 32 Amp. DP MCB (10 KA) C CurveCAT A |
| 155 | Supply and fixing Single Pole MCBS Blanking Plate complete in all respects. (CAT: A) |
| 156 | Supply and burying of 600mm x 600 mmx 6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8to10SWG G.I.wire in 15mm dia G.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in |
| 157 | all respects. |
| 158 | Supplying & Laying of 25mmx3mm G.I. Strip for earthing purpose as required complete in all respects. |
| 159 | SUBHEAD V-CABLES |
| 160 | Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface |
| 161 | 16 sqmm4 core |
| 162 | Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. |
| 163 | 16 sqmm4 core |
| 164 | Supply and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge. |
| 165 | 16 sqmm |
| 166 | SUBHEAD VI-MISCELLANEOUS |
| 167 | Supply of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required |
| 168 | 300mm sweep. |
| 169 | SEPTIC TANK & SOAK PIT |
| 170 | Size :- Length = 2.30 M. Width = 1.10M Total Depth =1.3M |
| 171 | Earth work in excavation including disposal of excavated earth, lead upto 50m, disposed earth to be levelled and neatly dressed. |
| 172 | In all kind of soil upto 1.5m depth |
| 173 | In all kind of soil upto 1.5m to 3.0m. depth |
| 174 | Providing and laying of cement concrete in base excluding the cost of centring and shuttering by 1:2:4 (1 cement : 2 coarse sand : 4 gradded stone aggregae 40mm nominal size) |
| 175 | Brick work with brick of class designation 150 in foundation and plinth in cement mortar (1 cement : 4 coarse sand) |
| 176 | Reinforcement cement concrete work in RCC culvert slab with 1:1.5:3 (1 cement : 1.5 coarse sand and 3 gradded stone aggregate of 20 mm nominal size) excluding centering and shuttering and reinforcement. |
| 177 | P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. |
| 178 | 12 mm cement plaster in single coat on FAIR side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 C. sand |
| 179 | Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 gradded aggregate of nominal size 20mm ) as per standard design with 20x20mm sq bars. |
| 180 | Providing and fixing C.I. tee at the inlet and outlet of septic tank. |
| 181 | Providing & fixing 75mm dia vent pipes. |
| 182 | Providing & fixing of 75mm dia cast iron terminal guard. |
| 183 | Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. |
| 184 | M.D. -10- Circular shape 500mm internal diameter |
| 185 | L.D. -2.5- Circular shape 450mm internal diameter |
| 186 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design. |
| 187 | With F.P.S. bricks |
| 188 | HAND PUMP |
| 189 | Supply of following sizes of P. V. C. pipes fittings ( 6 kg/cm2) |
| 190 | (a) 110 mm dia P. V. C. pipe |
| 191 | (b) 110 mm dia Slotted P. V. C. pipe |
| 192 | 12 mm dia M.S. connecting Rod with Hook & Thread |
| 193 | Supply of 32 mm dia G.I. pipe ( Medium class). |
| 194 | Supply of India Mark-IIHand Pump complete with 24 m connecting rod and one number Cylinder. |
| 195 | Hiring of boring T & P including its carriage upto site and return back after completion of work. |
| 196 | 150 mm dia boring by palm & pressure method in all type of strata and leveling the site after completion of work including supply of all labour etc. complete. |
| 197 | (a) 0 to 30 M below G.L. |
| 198 | Preparation of PVC assembly and lowering of 110mm/60mm PVC pipe and strainer including supply of all labour, carriage upto site etc. required for proper completion of work. |
| 199 | (a) 0 to 30 M below G.L. |
| 200 | Filling with coarse sand surrounding of hand pipe and below strainer and remaining base including supply of all labour, T & P, materials etc. required for proper completion of work. |
| 201 | Carriage of India Mark-II Hand pump, 32 mm dia G.I. Pile C/rod etc. for divisional store to site of work and its installation with G.I. Riser pipe including supply of all labour etc. complete with development of bole and its testing. |
| 202 | Construction of precast platform for India Mark-II Hand Pump as per departmental type design including supply of all materials, etc. required for proper completion of work. |
| 203 | Excavation for collection of water for boring |
| 204 | 2.5x2.5x1.5 = 9.375M3 |
| 205 | Water collection for pressure boring. |
| 206 | BOUNDARY WALL(4.06 M., 1.80 HT. ) |
| 207 | Earth work in exacavation in foundations in ordinary soil (loam clay or sand) including lift upto 1.5 m and lead upto 30 mt. & including filling, watering and ramming of excavated earth into the trenches or into the space between building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the E/I upto a distance of 30 mt. from the foundation trenches. |
| 208 | Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors. |
| 209 | First class brick work in 1:6 cement and coarse sand of 2.25 fineness modulus) mortar infoundation & plinth including supply of all materials, labour, T & P etc reqiored for proper completion of the work. |
| 210 | Paintingon D.P.C. with two coats of air blown bitumen 85/50 or 85/25 @ 1.7kg/sqm approxincluding cost of fuel if any. |
| 211 | Same as in item no. 9 abovebutin super-structure above plinth level up to floor two level (up to two storeys) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms. |
| 212 | R.C.C. work with cement approved coarse sand & 20 mm guage approved stone grit in the proportion of 1:1.5:3 in lintels of doors, windows excluding supply of reinforcement & its fixing, binding the same with 24 BWG binding wire & including necessary centering, shuttering etc. & also including supply of all materials, labour, T & P etc. required for proper completion of the works. strength of the concrete shall not beless than M-20. |
| 213 | Mild steel or iron in plan work shch as reinforced concrete or reinforced brick (when not included in over all rates) brought to require shape as necessary and also including being for proper completion of work and including supply of all steel and wastage & over lapping & hooks. |
| 214 | 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 fine sand |
| 215 | Finishingwallswith water-proofing on cementpaint of approvedmakesuch as super snowcem, durrocem, robiacem, guttucem supercem qualityandof required shade on undecorated wall surfaces(two coat) overone andincludingonecoatwhite cementprimertogiveaneven shade after thoroughly brushing the surface to powdered materialsincluding curing and cost of all materials. |
| 216 | BOUNDARY WALL (4.06 M., 1.50 HT. ) |
| 217 | Earth work in exacavation in foundations in ordinary soil (loam clay or sand) including lift upto 1.5 m and lead upto 30 mt. & including filling, watering and ramming of excavated earth into the trenches or into the space between building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the E/I upto a distance of 30 mt. from the foundation trenches. |
| 218 | Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors. |
| 219 | First class brick work in 1:6 cement and coarse sand of 2.25 fineness modulus) mortar infoundation & plinth including supply of all materials, labour, T & P etc reqiored for proper completion of the work. |
| 220 | Paintingon D.P.C. with two coats of air blown bitumen 85/50 or 85/25 @ 1.7kg/sqm approxincluding cost of fuel if any. |
| 221 | Same as in item no. 3 but in1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. |
| 222 | R.C.C. work with cement approved coarse sand & 20 mm guage approved stone grit in the proportion of 1:1.5:3 in lintels of doors, windows excluding supply of reinforcement & its fixing, binding the same with 24 BWG binding wire & including necessary centering, shuttering etc. & also including supply of all materials, labour, T & P etc. required for proper completion of the works. strength of the concrete shall not beless than M-20. |
| 223 | Mild steel or iron in plan work shch as reinforced concrete or reinforced brick (when not included in over all rates) brought to require shape as necessary and also including being for proper completion of work and including supply of all steel and wastage & over lapping & hooks. |
| 224 | 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 fine sand |
| 225 | Finishingwallswith water-proofing on cementpaint of approvedmakesuch as super snowcem, durrocem, robiacem, guttucem supercem qualityandof required shade on undecorated wall surfaces(two coat) overone andincludingonecoatwhite cementprimertogiveaneven shade after thoroughly brushing the surface to powdered materialsincluding curing and cost of all materials. |
| 226 | M.S. GATE (3.00 M.X1.80 HT.) |
| 227 | Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors. |
| 228 | First class brick work in 1:6 cement and coarse sand of 2.25 fineness modulus) mortar infoundation & plinth including supply of all materials, labour, T & P etc reqiored for proper completion of the work. |
| 229 | R.C.C. work with cement approved coarse sand & 20 mm guage approved stone grit in the proportion of 1:1.5:3 in lintels of doors, windows excluding supply of reinforcement & its fixing, binding the same with 24 BWG binding wire & including necessary centering, shuttering etc. & also including supply of all materials, labour, T & P etc. required for proper completion of the works. strength of the concrete shall not beless than M-20. |
| 230 | Same as above for R.C.C. Raft footing using 1:1.5:3 mix concrete |
| 231 | Same as above for R.C.C. Column (using 1:1.5:3 mix concrete) |
| 232 | Mild steel or iron in plan work shch as reinforced concrete or reinforced brick (when not included in over all rates) brought to require shape as necessary and also including being for proper completion of work and including supply of all steel and wastage & over lapping & hooks. |
| 233 | 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 fine sand |
| 234 | Finishingwallswith water-proofing on cementpaint of approvedmakesuch as super snowcem, durrocem, supercem qualityandof required shade on undecorated wall surfaces(two coat) overone andincluding one coat white cement primer to give aneven shade after thoroughly brushing the surface to powdered materials including curing and cost of all materials. |
| 235 | M.S. or iron work of small sizes and sectionin heavy sizes such as trusses, built up gates, record racks, roof work, Gates etc. including rivetting or welding where necessary wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. |
| 236 | Painting or varnishing on iron work in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T & P etc. required for proper completion of work. Paint to be used should confirm to the I.S.I. No. 103 1950 |
| 237 | INTERLOCKING TILES |
| 238 | Providing and laying of 80mm thick I shaped mechanically compressed cement concrete interlocking pavers block manufactured by high pressure & controlled vibration machine having plan dimension 200*(160+120mm) with minimum 5 mm topping of O.P. cement mixed with 25% marble powder. The compressive strength of concrete pavers blocks shall not be less than 30MPa & 4.5Kg/no. including cost of bedding sand & joint filling with sand all materials, labour, T & P etc. required for proper completion the work as per the direction of Engineer-in-charge, but excluding VAT which shall be paid extra as per rules. |
| 239 | Filling of carted earth. ARI |
| 240 | GSB 125 MM THICK |
| 241 | STROM WATERDRAIN (SIZE 150 X 150 MM) |
| 242 | Excavation of foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches. |
| 243 | Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors. |
| 244 | B/W in 1:4 ( 1Cement :4 Coarse sand) in foundation |
| 245 | 20 mm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. |
| 246 | Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size ) laid in one layer finished with a floating coats neat cement (25 mm thickfloor). |
| 247 | G.S.T. Will be paid Extra as per GST Notification |
AI Tender Summary
Tender Timeline
Nov 27, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 30, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedNov 30, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 30, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender