Military Engineer Services-MES has published Tender For Provision Of New 02 X Bore Well Alongwith The 30 Hp Submersible Pumpset And Other Connected Items At 36 Fad At Bathinda Under Ge(U) Bathinda.. Submission Date for this Tender is 21-12-2022. Bore Well Tenders in bathinda Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 14-Dec-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-12-2022 |
| Sl. No. | Item Description |
| 1 | Boring and drilling for 300 mm dia holes in any starta by reverse rotary rigor with the help of drilling machine/ Bocki system up to the depth of 100 mtr including developing and disposal of surplus soil/ material obtained from drilling to distance not exceeeding 50 mtr away from site of boring complete all as directed by Engineer-in-Charge. Notes :- (a) The starta sample shall be coollected at the regular interval of 3 meters and where there is a change of lithology. The starta sample shaii be kept in plastic bag with level of marking of depth and finally shall be stored in wooden boxes for further investigation if required. The cost of sample collection and its store shall deemed to be includedin the quoted rate for this item and nothing shall be paid extra on this account. (b) The cost of Machinery, Fuel , Labour for boring hole , drilling and arrangements for the same shall deemed to be includedin the quoted rate for this item and nothing shall be paid extra on this account. (c)The cost of removal and disposal surplus soil and material obtained from drilling to distance not exceeding 50 mtr away from site of boring is also included in the quoted rate and nothing shall be paid extra on this account. (d) The bore well should be developed with air compressor till the water becomes sand / silt free.The cost of the same is included in the quoted rate and nothing shall be paid extra on this account. |
| 2 | Supplying, jointing and lowering PVC casing pipe of 250 mm dia conforming toIS-4985-1995 in bore hole and joiting with cement solvent solution as per manufacturers instructions and testing complete all as directed by Engineer-in-Charge. Note : (a)Boring hole shall be measured and paid separately under respctive item of schedule of work of BOQ. (b)The cost of cement solution for jointing the pipe is included in the quoted rate of this item and nothing shall be paid extra on this account. |
| 3 | Supplying, jointing and lowering PVC casing pipe of 250 mm dia conforming toIS-4985-1995 with having perforated hole in bottom corroded with and including wire mesh filterin bore hole and joiting with cement solvent solution as per manufacturers instructions and testing complete all as directed by Engineer-in-Charge. Note : (a)Boring hole shall be measured and paid separately under respctive item of schedule of work of BOQ. (b)The cost ofwire mesh and cement solution for jointing the pipe is included in the quoted rate of this item and nothing shall be paid extra on this account. |
| 4 | Supply and fix MS reducer, bail plug, well cap, MS strip for cementing, MS iron clamps, electric logging and sample starta box complete all as directed by Engineer-in-Charge. |
| 5 | Supplying, fixing, jointing and testing of Steel water tubing 100 mmbore ISI marked, heavy class galvanized includingfittings viz Tee, Socket, bends elbows, union nipple , flanges, nuts, bolts, washers complete all as directed by Engineer-in-Charge. Notes : (a) The cost of GI fittings are included in the quoted rate of this item and nothingextra shall be paid on this account. (b) Excavation and Earth work shall be measured and paid separately under respective item. |
| 6 | Supply, fixing, installation and commissioning of submersible pump, electric driven, 415 volts, 3 phase, 2900 RPM, 1750 LPM, 50 m head range with pumping set, TP suitable for 250 mm dia borewell (casing pipe size 250 mm), capacity-30 HP complete all as directed by Engineer-in-Charge. |
| 7 | Supply and fixing 10 Sqmm flat 3 corecopper conductor, PVC insulated and sheathed industrial cable suitable for 30 HP Submersible pump complete all as directed by Engineer-in-Charge. |
| 8 | Excavationin trenches not exceeding 1.5 metre wide and not exceeding 1.5 metrein depth for foundation, laying of cables or pipes (where provided)and getting out in soft/loose soil including trimming the sides and forming bottom surfaces to required levels complete all as specified and as directed . |
| 9 | Supply and laying or fixing or laid in trenches/ ducts/ through pipes/ in floors / underroads/ hard standing /along poles and testing LT cable XLPE, PVC insulated screened,bedded, galvanised steel strip or wire armourd cable(heavy duty) 1100 volt gradewith aluminium conductor having cross sectional area 50 Sqmm3.50 coreconforming to IS-7098 (Part-I -1988) complete allas specified and as directed. |
| 10 | M&L for sand cushioning with coarse sand in trenches for protection of underground electric cable, spread to uniform 23 cm thickness and punned down gently to 18 cm complete all as directed. |
| 11 | Supply and laying un-reinforced precast concrete cable cover, Class LV, Type 1, Flat size 250mm x 150mm x 40mm complete all as specified and directed. |
| 12 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all specified anddirected. |
| 13 | Removal of surplus excavated soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all specified and as directed. |
| 14 | Supply, fabricating, installation, testing, commissioning and electrically connecting LT panel board of suitable size , 415 volts factory made dust and vermin prooffor out door type made out of CRCA sheet 3.15 mm thick except inner sheath of 2 mm, machine pressed both side opening in two halves ,LT Panel internally and externallyshall bepainted with epoxy powder coating paint , pickling & two coats primer, before being given the stove epoxy finish ,with rubber beading including aluminium bus bar mounted on porcelain insulator bus bar chamber shall be provided with inspection covers , each MCCB /cubical switch shall have be indipendent opening panel shall be mounted on angle iron frame and legs made from angle of size 50mm x 50mm x 6mm frame including lifting arrangement and legs duly spray painted internally and externally with two coats of synthetic enamel paint over one coat of red oxide primer , Legsembeading and grouting in PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate)including all connections/control wiring incoming/outgoing with suitable size of PVC insulated copper conductor cable comprising of following accessories and testingcomplete all as directed. (a) MCCB 4 pole100 Amps - 01 Nos (as Incomer) (b) MCCB 3 pole 100 Amps - 01 Nos (for pumpset) (c) FASD Starter suitable for 30 HP pumpset (d) Digital ampere meter including CTs - 01 Nos (e) Voltmeter - 01 Nos (f) Indicating lamps -03 Nos (RYB) (g) Push buttons |
| 15 | Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm burieddirectly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including 32 x 6 mmGI strip upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etcRCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate)including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 including taking down old unserviceable existing earthing. |
| 16 | Excavation in post holes in soft loose soil each not exceeding 0.5 CUM, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm thick, watering and removing surplus soil to a distancenot exceeding 50 meter and making good surface complete all as directed |
| 17 | M&L for PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in foundation of posts an struts complete all as specified. |
| 18 | S&F Mild steel work swan neck, angle iron & flat iron including embedding in concrete and screwing etc including cutting tops to shape as directed bent to shape, drilling holes, notching for wire etc, including all necessary drilling bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed |
| 19 | M&L for packing rounded particles reasonably uniform in the annular spaces around the well against well assemblyof size 3 mm Pea size gravelsi.e in between the bore hole and casing pipe complete all as directed. Note: Cost of pea gravel is included in this item. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
