Tender For Repairs To Joinery, Roof Treatment, Floor Tiles, Sunken Treatment And Other Allied Works At 9Brd Under Age B/R-Ii Of Ge (Af) Lohegaon At Airforce Station Pune
Tender Value
42 Lakhs
Estimated cost
Bid Submission
17 Dec 2022
0 days left
EMD
84000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairs To Joinery, Roof Treatment, Floor Tiles, Sunken Treatment And Other Allied Works At 9Brd Under Age B / R-Ii Of Ge ( Af ) Lohegaon At Airforce Station Pune
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-Dec-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 17-Dec-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking/removing plaster including old roof treatment of any description complete all as specified and directed. |
| 2 | Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 3 | M&L for 40mm thick PCC (1:2:4) type B-0 using 12.5mm gradded stone aggreggate as in levelling course of flooring complete all as specified and directed. |
| 4 | M & L for rendering 15 mm thick cm 1:3 with mixing of water proofing powder @ 200ml/50 Kg by Wt of cement incl finishing even and smooth W/O using extra cement complete all as specified and directed. (Note - water proofing powder shall be measured and paid separately) |
| 5 | Supply only liquid water proofing compound complete all as specified and directed. |
| 6 | Providing and laying APP modified water proofing membrane 3 mm thcik with non woven ployster reinforcement having weight not less than 3.5 Kg per sqm over a coat bituminous primer oil based for membrane by the respective manufacture @ 0.30 ltr per sqm including overlapping as specified and as approval of make as specified in PS including one coat of bituminous based aluminium paint on top surface complete all as specified and directed. |
| 7 | S&F 1.25mm steel rolling shutters, without ball bearing, as specified including top cover, an anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: gear operated type with bevel gear box and crank handle complete all as specified and directed. |
| 8 | S&F Ball bearing for rolling shutters complete all as per specified and directed |
| 9 | Taking down steel rolling shuter, bevel gear box & crank handle type, gear operated from position incl top cover, pipe,shaft,chain pully etc but excluding gide rail, refixing in same position after strengthing, rectifying warped, bucked parts if any incl greasing/oiling, area of shutter n\"exc 15 sqm each complete all as per specified and directed. |
| 10 | -ditto- all as per Ser Item No 09.00 above but area exc 15 sqm but n\"exc 25 sqm complete all as specified and directed. |
| 11 | Taking down chowkats or frame exc 1.50 sqm but n.exc 4 sqm each (without taking off shutters from the frame) complete all as specified and directed. |
| 12 | Taking down chowkats or frame n.exc 1.50 sqm each (without taking off shutters from the frame) complete all as specified and directed. |
| 13 | Taking down shutters of any description exc 1 sqm but n. exc 2 sqm each complete all as specified and directed. |
| 14 | -ditto- all as per Ser item No 13.00 abovehere in beforebut eachnot exceeding 1 Sqm complete all as specified and directed. |
| 15 | Refixing the shutters exc 1 Sqm but not.exc 2.00 Sqm each in same opening each complete all as specified and directed. |
| 16 | Hacking out old broken glass any thickness, size quality or description from metal frames exc 1.5 sqm including punching drillinggout old glazing pins/spring clips complete all as specified and directed. |
| 17 | Taking down plaster on brick or stone wall including racking out joints hatching for key scrubbing down with water etc complete all as specified and directed. |
| 18 | Dismantling timber scantlings 40 sq. cm and over in section, Framed work in any position complete all as specified and directed. |
| 19 | Dismantling of Battens for tiles, shingles etc, of any size including tilting fillets complete all as specified and directed. |
| 20 | Dismantling fillets, any description, fixed in any position with nails complete all as specified and directed. |
| 21 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 22 | Dismantling of plain or corrugated steel sheeting, any gauge or any thickness in roof covering complete all as specified and directed. |
| 23 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 24 | Dismantling of wall/ceiling boardas in ceiling and lining of any gauge or any thickness including cover fillets all as directed complete all as specified and directed. |
| 25 | S&F for joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)Fe 410 -W (GdeE- 250) quality A complete all as specified and directed. |
| 26 | S&F for rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting platesFe 410 -W (GdeE- 250) quality A complete all as specified and directed. |
| 27 | S & F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, locks, strike plate etc complete and the size of frame is 165 x 60 mm complete all as specified and directed. |
| 28 | S & F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, locks, strike plate etc complete and the size of frame is 105 x 60 mm complete all as specified and directed. |
| 29 | M & L for PCC 1:3:6 type C0 using 12.5 mm graded aggregate as in filling of pressed steel frame chowkats complete all as specified and directed. |
| 30 | S & F steel windows with side hung shutters (single frame with double shutter)inside gauzed and outside glazed including projection type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed. |
| 31 | S & F steel ventilator with top hung shutters including hinges steel peg stay,complete all as specified and directed. |
| 32 | S & F flush shutters water proof BWR grade solid core construction with block board core and ply wood face panel commercial type both sides 40mm thick complete all as specified and directed. |
| 33 | S&F second class hard wood 35mm thick glazed and skeleton shutters of doors, open rebated and prepared to receive glass gauge etc (withsash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8 Clause 8.20 (b) and fitted to chowkats complete all as specified and directed. |
| 34 | M&L for 2nd class hard wood 35 mm thick glazed and skeleton shutter for window and vent open rebated prepared to receive, glass guage etc, devided in to square withplain, chamferred or rounded mitered or roundedsush bar (any nos) complete all as specified and directed. |
| 35 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 36 | Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of ms tubes for top &bottem rails, ms frame shall be covered with heat moulded plain colour PVC \"C\" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour pvc sheetfor top rail ,lock rail, & bottem rail, on either side & as gap insert for top rail , panneling of plain colour pvc sheet to be fitted in the ms frame welded /sealed to the stiles & rails with suitable pvc sheet beading, & jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 37 | S&F 100 mm long butt hinges, medium weight, and cold rolled mild steel complete all as specified and directed. |
| 38 | S&F 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 39 | S&F 200 mm long Mild steel barrel tower bolts, stove enamelledblack, with bright bolt and fixed complete all as specified and directed. |
| 40 | S&F in repairs 150 mm extruded aluminum alloy handles, cast type, anodized complete all as specified and directed. |
| 41 | S&F in repairs 150 mm Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed. |
| 42 | S&F in repairs 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 43 | S & F galvanised stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40mm and fixed with tinned tackles or galvanished wire complete all as specified and directed. |
| 44 | S&F in repairs for GI wire cloth of 0.56 mm nominal dia of wire & 1.18 mm avg width of aparaturrefixed with wooden beeds complete all as specified and directed. |
| 45 | S & F sheet glass ordinary quality 3mm thick glazing with oil putty in squares n. exc 0.5 sqm in each pane complete all as specified and directed. |
| 46 | -ditto- all as perSer item No 45.00 above but of frosted glass complete all as specified and directed. |
| 47 | S&F powder coating anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 48 | S&F powder coating anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 49 | S&F powder coating anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 50 | S & F Sheet Glass, Ordinary quality 5.5 mm Thick including necessary rubber beading complete all as specified and directed. |
| 51 | M & L Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work 19/18 mm complete all as specified and directed. |
| 52 | M&L for rendering 10 mm thick in CM 1:4 on broken chajjas /facia/walls/ceilings etc, area n. exc 3 sqm each patch (in repairs) , includings finishing to match with existing surfaces complete all as specified and directed. |
| 53 | M & L for rendering 10mm thick in CM 1:6 finished even and smooth w/o using extra cement complete all as specified and directed. |
| 54 | Material and labour for 15 mm thick rendering in cement mortar (1:4) on fair face of brick with water proofing compound @ 200ml/50 Kg of cement or concrete surface finished even and fair all as specified. (Water proofing shall be measured and paidseparately complete all as specified and directed. |
| 55 | Second class hard-wood clean sawn as in scantlings fixed in framed work complete all as specified and directed. |
| 56 | Second class hard-wood Clean sawn battens at 30cm centres, sectional areaexc 5 & nexc 15 Sqcm complete all as specified and directed. |
| 57 | M&L Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, 2nd class hard wood, N-exc 3 sqcm complete all as specified and directed. |
| 58 | Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Creasote complete all as specified and directed. |
| 59 | S & F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 60 | S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 61 | S&F for aluminium powder coated snap grid frame work for suspendedfalse ceiling size 605 x 605mm with9mm thick PU coated Gypsum boardin ceiling fixed with screws including hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete as per manufacturer instructions complete all as specified and directed. |
| 62 | Material and labour for providing 75 mm thick PCC (1:3:6) type C2 using 40 mm graded aggregate as Path/Plinth protection finished the surface even & smooth with out using extra cement complete all as specified and directed. |
| 63 | M&L for PCCtypeD-2, 1:4:8 using 40 mm graded aggregate (100 mm thick)as in flooring, finished the surface even & smooth withoutusing extra cementcomplete all as specified and directed. |
| 64 | S&F for glass dividing strip 3 mm thick & 38 mm wide fixed to floor complete all as specified and directed. |
| 65 | Material only 25 mm sand cushioning for laying paver block complete all as specified and directed. |
| 66 | M&L for machine pressed precast concrete interlocking paver block 60 mm thick rubber moulded any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and pigment complete all as specified and directed. |
| 67 | M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 68 | M&L of Makarana Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types complete all as specified and directed. |
| 69 | M&L for preparing new or previously untreated steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enemal paint over red oxide primer complete all as specified and directed. |
| 70 | M&L for preparation of new plastered/unplastered surfaces and applying three coats of whte wash on walls complete all as specified and directed. |
| 71 | Material and labour for applying two coats of Cement Base Paintover a coat ofChalk whiting on walls including preparation of old/new or previously untreated surfaces complete all as specified and directed. |
| 72 | Material and labour for applying two coats of oil bound distemperover a coat ofChalk whiting on walls including preparation of old/new or previously untreated surfaces complete all as specified and directed. |
| 73 | Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level), complete all as specified and directed. |
| 74 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed. |
| 75 | M&L for nonskid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sq m but not exceeding 0.11 sqm in floors , set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bedin CM (1: 6) complete all as specified and directed. |
| 76 | M&L for nonskid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors , set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bedin CM (1: 6) complete all as specified and directed. |
| 77 | S&F 450x300x7mm thick glazed ceramic concept tile coloured on vertical surfaces such as skirting, dados, risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 10 mm thick cement mortar rendering in CM 1:4 complete all as specified and directed. |
| 78 | M&L for vitrified ceramic tiles Darkshade 10mm thick (square/rectangular ) polished ,area of each tilesexceeding 0.36 sqm but not exceeding 0.42sqm in floors ,in floors and dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 79 | M&L for PCC (1:2:4) type B1 using 20 mm graded aggregate (25 mm thick)as in flooring, finished the surface even & smooth with using extra cement complete all as specified and directed. |
| 80 | M&L for machine cut Kota stone slab flooring 20mm thick and over and incl 15mm thick screed bed in CM (1:6) cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding and mirror polishing 7 cut as per local trade practice and cut to shape of required size complete all as specified and directed. |
| 81 | M&L kota stone slab 20mm thick in riser of steps skirting, dado and pillar laid over cement screed and jointed including 10mm thick rendering in CM(1:4) complete all as specified and directed by the Engineer-in-Charge. |
| 82 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate as in sub base of floor and path, complete all as specified and directed. |
| 83 | M&L for PCC 1:5:10 type E2using 40mm graded stone agg as in foundation filling and mass concrete complete all as specified and directed. |
| 84 | M&L for PCC 1:1½ : 3 orBitumastic Gola with 80/25 bitumen and coarse sand mixer 1:3 by weight 8cm x8cm at the junction of roofing to vertical surface as in sunken or similar work complete all as specified and directed. |
| 85 | M&L for Bitumen blown any grade applied hot, two coats to concrete bedding surface @ 1.5Kg/Sqm per coat as in sunken floor complete all as specified and directed. |
| 86 | M&L for polythene flim black 50 micron laid in sunken floor complete all as specified and directed. |
| 87 | M&L for 25mm thick PCC 1:1.5:3 tye A0 using 12.5mm graded stone agg as in sunken floor mixed with water roofing comound finished fair and even complete all as specified and as directed (Note:- WPC shall be measured and paid separately). |
| 88 | M&L for spout of 50mm bore GI pipe and projection 450mm clear from outer wall in any length or description with rubber ring joints and fixed in sunken floor etc for drain out logging as in sunken floor etc or similar work complete all as specified and directed. |
| 89 | M&L for 75mm thick PCC in (1:2:4) type B2 using 20mm graded stone agg as in sunken floor complete all as specified and directed. |
| 90 | M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed. |
| 91 | M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight)complete all as specified and directed. |
| 92 | M&L for hold fast made up of flats iron of size 25x3mm conforming to FE 290 Gde -E-165 complete all as specified and directed. |
| 93 | Taking up or down 15 mm bore GI tubing and connection including cleaning for refixing or removal complete all as specified and directed. |
| 94 | Taking up or down 20 mm bore GI tubing and connection including cleaning for refixing or removal complete all as specified and directed. |
| 95 | Refixing old steel tubing and connection 15 mm bore in new or old positionin wall, ceiling and floor etc complete all as specified and directed. |
| 96 | S&F 15mm medium gradeGI steel tubing including all fittings and fixed complete to wall ,ceiling and laid in floor etc complete all as specified and directed. |
| 97 | Refixing old steel tubing and connection 20 mm bore in new or old positionin wall, ceiling and floor etc complete all as specified and directed. |
| 98 | S&F 20mm medium gradeGI steel tubing including all fittings and fixed complete to wall, ceiling and laid in floor etc all complete all as specified and directed. |
| 99 | S&F in repairs 15 mm dia stop cock of cast copper alloy but fancy type chromium plated screwed down high presser with crutch or butter fly handle on both ends for iron pipe or for union fixed complete all as specified and directed. |
| 100 | S&F swivel shower rose of CP any colour for fixed with 15mm bore GI pipe & 195mm long with bend of 45 degree with flange of CP any colour (Minimum weight 40gms) complete all as specified and directed. |
| 101 | S&F in repairs Bib taps, fancy type CP cast copper alloy with crutch or butter fly handle , screwed down, or secrewed for ironpipe or for brass ferrule complete all as specified and directed. |
| 102 | S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered ‘Hot\" or ‘Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 103 | S&F in replacement brass CP mixer pillar tap 15 mm bore (Two way), cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered \"Hot or cold\" with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 104 | S&Fin repairs Waste coupling of PTMT 32 or 40mm and min wt 45 or 60gms complete all as specified and directed. |
| 105 | S&Fin repairs 10 ltr capacity PVC valve less symphonic action type flushing cistern, white ,with inlet ball valve, float and handle including bracket and 32 mm dia HDPE flush pipe and connected to squat pattern /pedestal pattern water closet (Flush shall be fixed at suitable height for smooth functioning ) complete all as specified and directed. |
| 106 | S&F PVC connection 15mm bore with PTMT nuts and 750mm long complete all as specified and directed. |
| 107 | S&F in repair vitreous china wash hand basin, white flat back size 550x400mm complete including necessary cutting for and pinning in ends of brackets ) including brackets and 750mm long PVCwaste pipe 32mm bore & waste coupling 32mm dia of PTMT (half or full threaded) complete all as specified and directed. |
| 108 | S&F in repair vitreous china squatting pan `Orissa’ pattern, size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with ‘P’ or ‘S’ trap including provision of lime concrete bedding complete all as specified and directed. |
| 109 | S&F20 mm dia stop cock of copper alloy screwed down high presser with crutch or butter fly handle on both ends for iron pipe or for union fixed in repair complete all as specified and directed. |
| 110 | S&F 110mm bore PVCbends of any radius complete all as specified and directed. |
| 111 | S&F 75mm bore PVC SWR bends of any radius complete all as specified and directed. |
| 112 | S&F 75mm bore PVC (SWR) vent cowl, complete all as specified and directed. |
| 113 | S&F 110mm bore PVC (SWR) vent cowl, complete all as specified and directed. |
| 114 | M&Lfor 75/100mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed. |
| 115 | S&F 75mm PVC SWR pipes single socketed,in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 116 | S&F 110mm PVC SWR pipes single socketed,in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 117 | Dismantling water tank of exc. 500ltr but n.exc 1000ltr capacity and removing from site complete all as specified and directed. |
| 118 | -ditto- all as per Ser Item No 117.00 above but exc 250 and n.exc 500ltr capacity complete all as directed |
| 119 | S&F rotational moulded polyethylene cylindrical vertical with closed top water storage tank double layered 500 Ltr capacity, hoisted and fixed in position on new or existing foundation and makingGI tubing inlet or outlet connection complete all as specified and directed. |
| 120 | -ditto- as per Ser item No 119.00 above but exc.500 and n.exc 1000ltr capacity complete all as specified and directed. |
| 121 | S&F for5mm thick bevelled edge mirror of any size of selected quality glass mounted on 6mmm thick AC building board or commercial ply wood including framing and fixed to woodenplugs with CP screws & cup washers & fixed in repair complete all as specified and directed. |
| 122 | S&F Sink made of stainless steel 1mm thick kitchen or laboratory with plug washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size495x420mm bowl size 410x330x160mm complete all as specified and directed. |
| 123 | S&F in repair Vitreous China wash down water closet pan (padestal pattern) white excluding flushing cistern, fixing bolt and flush pipe and including seat cover complete all as specified and directed. |
| 124 | S&F in repair Glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated brackets guard and railing 60cm long complete all as specified and directed. |
| 125 | S&F in repair corner glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated brackets guard and railing 60cm long complete all as specified and directed. |
| 126 | S&F in repairtoiletpaper holdervitreous China,box type complete all as specified and directed. |
| 127 | Disconnecting existing water tankexc 250 but n.exc 500ltrs, setting aside(for lowering if required) for repair cleaning, removing all scale and dirt by means of bleaching powder etc from tanks and from mouth of circulatring pipes and re-fixing in position complete all as specified and directed. Note: (Cleaning date shall be written on tank with black or white paint.) |
| 128 | S&F in repair Vitreous China half stall urinalsbowel type (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 secuing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement, fixing automatic flushing cistern with brackets flush pipe grating and union fo dischage pipe (excluding of fixing supply pipe to flushing cistern, trap) includingwaste pipe complete all as specified and directed. |
| 129 | S&F Tubular towel rail 20mm dia 600mm long CPincluding brackets complete all as specified and directed. |
| 130 | S&F100 mm Branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type or with parallel branches complete all as specified and directed. |
| 131 | -ditto- all as per Ser Item No 131.00 above but double complete all as specified and as directed |
| 132 | S&F75 mm Branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type or with parallel branches complete all as specified and directed. |
| 133 | -ditto- all as per Ser Item No 132.00 above but double complete all as specified and as directed |
| 134 | M&L for cutting holes in to brick wall built in cement mortar for inserting hold fast exc hlaf brick and n.exc one brick and making good to dismantled portion with PCC 1:2:4 type B1 or CM 1:3 complete all as specified and directed. |
| 135 | M&L for treating small articles such as stops, covers, gully gratings, holdfasts, ends of post, back of chowkhats etcwith tar, coal tar black paint area exc 0.1 Sqm and n.exc 0.5 Sqm each complete all as specified and directed. |
AI Tender Summary
Tender Timeline
Dec 10, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Dec 17, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedDec 17, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 24, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender