|
| 1 | Comrehensive maintenance and repairs of electrically operated lifts06 Nos. (Passenger/Goods) with collective/selective control at following locationsby employingminimum 01 No. lift mechanicsand 01 No. trained and qualified electricians to ensure smooth operation of lifts including fixing only spares. Supply only spares shall be measured and paid under relevant items of schedule \"A\"all as specified and directed by Engineer-in-charge.Note : Cost of Lubricants and minor spares required if anyshall be deemed to be included in the rate quoted.Goods lift 2000 Kg capacity at North Dry Dock |
| 2 | All as per item No 1.00 above butGoods lift 2000 Kg capacity at North Dry Dock |
| 3 | All as per item No 1.00 above butPassengerlift 800 Kg capacity at IDDC Bldg |
| 4 | All as per item No 1.00 above but C of Y Passenger lift, 8 passenger - 01 No. |
| 5 | All as per item No 1.00 above but Gomati Block lift, 08 passanger - 01 No. |
| 6 | All as per item No 1.00 above but Ganga Block lift, 08 passanger - 01 No. |
| 7 | All as per item No 1.00 above but Bldg No.25A,400Kg - 01 No. |
| 8 | All as per item No 1.00 above but Bldg No.25A,2000Kg - 01 No. |
| 9 | All as per item No 1.00 above but Bldg No.25B,3000Kg - 01 No. |
| 10 | All as per item No 1.00 above but Bldg No.16,2000Kg - 01 No. |
| 11 | Half yearly load testing of lift using artificial load in presence of Lift Inspector approved by Govt of AP and submit test certificate as per Factories act. Note :- (i) Artificial load shall be arranged by contractor. (ii) Handling and transporting of artifical load to work site shall be arranged by the contractor. |
| 12 | S&F and testing V V V F drive up to 3.7 KW for ARD of lift motor up to 11kw including feeding all parameters and interfacing with controller microprocessor and drive including setting of basic parameters to obtain the desired and designed value of various motions of the lift complete all as per manufactures instructions as specified and directed by Engr-in-charge. Make : Toshiba/ Yasakawa/ ESCON(i) Input voltage :-180 to 220V(ii) Phase:- 3 Phase(iii) Motor power in Kw :- 11KW(iv) Capacity in KVA :- 19 KVA(v) Rated out put current :- 10Amps |
| 13 | S&F cabin operating panel suitable for auto door /Goods lift serving up to 7 floors with illuminated push button working on 24 VDC and digital position indicator with travel direction indicator working on 24 VDC all shall be mounted on 1.5mm thick Stainless steel 304 gde sheet with acrylic sheet for digital position indicatorincludingall necessary hard ware to fix the COP at site complete all as specified and as directed.Make Toshiba/Yasakawa/ESCON |
| 14 | Supply only main hoist rope size 13mm heavy duty confirming to relevant IS complete all as specified and as directed..Make : USHA MARTIN |
| 15 | Supply only power contactor, 32 Amps with 02 Nos + 2 NC.Aux contacts with 230 V AC/110V DC complete all as specified and as directed..Make : SIEMENS/TELEMECANIQUE/L&T/C&S/AB |
| 16 | Supply only illuminated push button working on 12/24 VDC complete all as specified and as directed.Make : IES or Equivalent |
| 17 | Supply only main contactor with coil, 60 Amps, Power contactor with 2 Nos + 2NC aux.Contacts and with 230 VDC coil complete all as specified and as directed.Make : C&S/AB/TELEMECANIQUE |
| 18 | Supply only break, protective device to lock/doors mechanically complete all as specified and as directed.. Make : IES or Equivalent |
| 19 | Supply only Axial Flow Cabin Fan complete all as specified and as directed.. |
| 20 | Supply only Gate lock for collapsible gate complete all as specified and as directed. |
| 21 | Supply only 3 change over 24 volts DC relay complete all as specified and as directed..Make : PLA/OEN |
| 22 | Supply only 1 change over relay with 12/24 volts DC coil complete all as specified and as directed..Make : PLA OEN |
| 23 | Supply only Al or SS sill for collapsible gate of opening upto 1800 mm complete all as specified and as directed.. |
| 24 | S&F speed reduction Gear box suitable for 2000 kgelevator with phosphorus bronze worm wheel and stainless steel worm shaft housed in cast iron housing with suitable bearings for worm wheel and worm shaft .The gear box shall be oil cooled with glass inspection window to inspect the oil level in the gear box.The Gear box shall be provided with necessary key to lock the flange properly complete all as specified and as directed. Make: MOTANARAI/Elcon/shanti |
| 25 | Supply only charger card of automatic rescue device 230 Volts input/72 Volts output complete all as specified and as directed.Make : Jeltron or Equivalent |
| 26 | Supply only converter card of automatic rescue device 72 Volts input/24 Volts output complete all as specified and as directed..Make : Jeltron or Equivalent |
| 27 | Supply only trailing cable 12 Core x 0.75 Sqmm complete all as specified and as directed..Make : BST/RR Kable/Microtherm |
| 28 | Supply only full infrared sensor for door includingtranmitter receiver and control unit workingon 230 VAC complete all as specified and as directed. |
| 29 | Supply only 12 volts 7 AH maintenance free sealed batterycomplete all as specified and as directed.Make: Exide/Amco |
| 30 | Supply only main controller transformer primary 415VAC secondary - 24/110/130/230/270 VAC 500VMake : SSMP or Equivalent |
| 31 | Supply only Break Coil 110 VDC230/270 VDCMake : ELECON or equivalent |
| 32 | Supply only retiring cam workin on 120 VDCMake : IES or Equivalent |
| 33 | S&F Microcontroller based processor control for ARD working on 24 V DC, plug type connectors on input and out put side ,output side shall have 2 connectors one for relay bd and other one for status indicator on ARDdoor including all input shall be protected by opt couplers complete all as specified and as directed.Make:- JELTRON /IES |
| 34 | Supply and fix variable voltage variable frequency drive suitable for any capacity of lift including setting of all parameters to suit the controller with full load complete after taking down old unserviceable one complete all as specified and as directed.Make : TOSHIBA/YASAKAWA/CONTROL TECH/ EMERSON/ ESCON |
| 35 | Supply only door motor with built in rotary encoder, VVVF drive for car door operator complete all as specified and as directed..Make : TOSHIBA/MONARCH |
| 36 | Material and labour in replacementof collapsible gate assembly including roller wheels, wheel track (bottom and top) of existing size at site for any floor / wall including replacement of unserviceable rubber bushes, grill, handles and greasing complete all as specified and as directed. |
| 37 | Material and labour for taking out the burnt lift motor of 3 Phase 10 HP from the bed, transportation to the approved workshop and removing existing burnt winding and rewinding with new super enameled copper wire and cleaning of stator body and rotor and applying varnish, heating up and reassembling the motor by replacing of both end bearings including painting with one coat of synthetic enamel paint and reinstall the motor in its original position, connecting electrical cables, testing and commissioning complete all as specified and as directed. |
| 38 | Material and labour for preparation of old painted surface of passenger/ Goods lift cabin car including door/ collapsible gate at all floors, control panel, motors, gearbox, counter weights and other steel surfacesand applying one coat of synthetic enamel paint of shade same as existing complete all as specified and as directed. |
| 39 | Supply only Landing door Mechanism suitable for Centre Opening Auto door 800mm along with SS Panels with Vision Panel complete all as specified and as directed. |
| 40 | Supply only Car door Machanisium suitable for Centre Opening Auto door 800mm along with SS panel with Vision Panel complete all as specified and as directed. |
| 41 | S&F landing push button suitable for collective lift with illuminated push button and digital position indicator with all necessary fixing hardwarecomplete all as specified and as directed. |
| 42 | S&F in replacement of LOP (Landing Operating Panels) made out of AISI 304 Grade Stainless steel sheet of 1.5 mm thick including buttons, lock and all relevant features, wiring complete all as specified and directed. Make : ESCON or Equivalent |
| 43 | S&F in replacement ofFloor Announcement System in the controller and high quality speaker on cartop complete all as specified and as directed.complete all as specified and directed.Make : ESCON or Equivalent |
| 44 | S&F in replacement of 2 way intercom system complete all as specified and directed. |
| 45 | S&F in replacement of LED lights suitable for Car Cabin lift complete all as specified and as directed. |
| 46 | S&F in replacement of overload warning indicator suitable for passanger/goods lift complete all as specified and directed. Make : IES/ESCON |
| 47 | Supply and fix micro processor micro lagix 1200 (40 I/O) programmable type 1762-L40BWA, input power 230 volts AC +/- 15% at 47 to 63 Hz power supply usage 82 VA, outut voltage 24 V DC at 400 MA. Inut :- input circuit type 24 V DC sink/source, on state voltage range 10 to 2.7 K Ohm. Ouput : Output type relays, current per group of 4 relays 8 Amps, Turn ON/OFF times 10 millisec, relay contact rating 24 Volt DC 2.0 Amps for full collective operation to match existing auto door lift including software installation and necessary relays and contractors complete all as specified and directed. Make : Allen Bradley or equivalent |
| 48 | S&Fmosfet card with 72 VoltAC to 230 V AC complete all as specified and directed .Make : Jeltron/IES |
| 49 | S&F dual shaft extended break unit working on 110VDC supply, the break unit shall have 2 coils with emergency release handle along with drums and arms with break bands of 6mm thickness complete all as specified and as directed.Make:-MOTANARAI/IES |
| 50 | S&F MS frame suitable for mounting elevator gear box along with traction sheave,motor,break unit and other components of machie unit of elevator ,the frame shall be provided with anti viberation pads along with all hard ware required to fix the complete machine unit the frame shall be made out of suitable C channel and I beam complete all as specified and as directed.Make IES |
| 51 | S&F cast iron heat treated traction sheave suitable for 13mm elevator steel rope along with locking key to mount on gear box the sheave shall be of 520 mm dia with 4 grooves for ropes complete all as specified and as directed.Make:- MONTANRI/ IES |
| 52 | S&F 12 relay card suitable for ARD relay shall be 1C/O with 24 VDC coil, 6 Amp current rating contacts ,each relay shall be provided with LED indicator and Varistor for protection on output side .plug in connecters shall be provided on input and output side complete all as specified and as directed.Make JELTRON/IES |
| 53 | Supply only trailing cable 12 core x 0.5Sqmm complete all as specified and as directed.Make: BST/RR Kable/Microtherm |
| 54 | Supply only 2 change over 24 Volts DC coil complete all as specified and as directed.Make: PLA/OEN |
| 55 | Supply only main hoist rope size 8mm heavy duty confirming to relevent IS complete all as specified and as directed.Make: USHA MARTIN or Equivalent |
