Dr. S.N.Medical College has published Tender For Rate Contract For Supply Of Various Orthopedics Implants Etc. Submission Date for this Tender is 06-01-2023. Kitchen Equipment Tenders in jodhpur Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 14-Dec-2022 | CHANGE DATE | Date | 06-01-2023 |
| 2 | 21-Dec-2022 | Corrigendum AS PER TECHNICAL COMMITTEE | Technical Bid | 06-01-2023 |
| Sl. No. | Item Description |
| 1 | Interlocking femur nail cannulated with locking bolts |
| 2 | Nail - All Sizes |
| 3 | Locking Bolts |
| 4 | Zig& Sleeve Set Compatible of same make |
| 5 | Interlocking Tibia nail cannulated with locking bolts |
| 6 | Nail - All Sizes |
| 7 | Locking Bolts |
| 8 | Zig& Sleeve Set Compatible of same make |
| 9 | Expert Tibia interlocking nail multiple holes on proximal and distal side with locking bolts |
| 10 | Nail - All Sizes |
| 11 | Locking Bolts |
| 12 | Zig& Sleeve Set Compatible of same make |
| 13 | Humerus interlocking nail canulated with locking bolts |
| 14 | Nail - All Sizes |
| 15 | Locking Bolts |
| 16 | Zig& Sleeve Set Compatible of same make |
| 17 | PFN nail(short) 130 degree with proximal Lag screws & locking bolts |
| 18 | Nail - All Sizes |
| 19 | Proximal leg screw |
| 20 | Locking Bolts |
| 21 | Separate zig for 130 & 135 degree |
| 22 | Zig& Sleeve Set Compatible of same make |
| 23 | PFN nail(short) 135 degree with proximal Lag screws & locking bolts |
| 24 | Nail - All Sizes |
| 25 | Proximal leg screw |
| 26 | Locking Bolts |
| 27 | Separate zig for 130 & 135 degree |
| 28 | Zig& Sleeve Set Compatible of same make |
| 29 | PFN nail(Long) 130 degree with proximal Lag screws & locking bolts |
| 30 | Nail - All Sizes |
| 31 | Proximal leg screw |
| 32 | Locking bolts |
| 33 | Separate zig for 130 & 135 degree |
| 34 | Zig& Sleeve Set Compatible of same make |
| 35 | PFN nail(Long) 135 degree with proximal Lag screws & locking bolts |
| 36 | Nail - All Sizes |
| 37 | Proximal leg screw |
| 38 | Locking Bolts |
| 39 | Separate zig for 130 & 135 degree |
| 40 | Zig& Sleeve Set Compatible of same make |
| 41 | PFN A2 Nail(short) with Proximal blade & locking bolts |
| 42 | Nail - All Sizes |
| 43 | Proximal blade |
| 44 | Locking Bolts |
| 45 | Zig& Sleeve Set Compatible of same make |
| 46 | PFN A2 Nail(Long) with Proximal blade & locking bolts |
| 47 | Nail - All Sizes |
| 48 | Proximal blade |
| 49 | Locking Bolts |
| 50 | Zig& Sleeve Set Compatible of same make |
| 51 | Distal Femoral Nail(Supracondylar Nail) with locking bolts |
| 52 | Nail - All Sizes |
| 53 | Locking Bolts |
| 54 | Zig& Sleeve Set Compatible of same make |
| 55 | HIND Foot Arthrodesis fusion Nail/ TTC Fusion Nail with locking bolts |
| 56 | Nail - All Sizes |
| 57 | Locking Bolts |
| 58 | Zig& Sleeve Set Compatible of same make |
| 59 | 1/3 Tubular Plate(3.5 mm hole) with compatible screws |
| 60 | Nail - All Sizes |
| 61 | Cortical screw |
| 62 | Cancellous screw |
| 63 | Semi tubular Plate with compatible screws |
| 64 | Plate - All Sizes |
| 65 | Cortical screw |
| 66 | Cancellous screw |
| 67 | Reconstruction Plate(3.5mm) with compatible screws |
| 68 | Plate - All Sizes |
| 69 | Cortical screw (Bolt - Locking & Non Locking) |
| 70 | Cancellous screw (Bolt - Locking & Non Locking) |
| 71 | Reconstruction Plate(4.5mm) with compatible screws |
| 72 | Plate - All Sizes |
| 73 | Cortical screw |
| 74 | Cancellous screw |
| 75 | L.C.D.C.P small(3.5 mm) with compatible screws |
| 76 | Plate- All sizes |
| 77 | Cortical screw- All sizes |
| 78 | Cancellous screw |
| 79 | L.C.D.C.P narrow(4.5 mm) with compatible screws |
| 80 | Plate - All Sizes |
| 81 | Cortical screw |
| 82 | Cancellous screw |
| 83 | Locking Reconstruction Plate(4.5mm) with compatible screws |
| 84 | Plate - All Sizes |
| 85 | Cortical screw(Nonlocking) |
| 86 | Cortical screw(locking) |
| 87 | Cancellous screw(Locking) |
| 88 | Distal Radius Volar Locking Plate(Variable Angle Plate) with compatible screws |
| 89 | Plate - All Sizes |
| 90 | Cortical screw(Nonlocking) |
| 91 | Cortical screw(locking) |
| 92 | Cancellous screw(Locking) |
| 93 | Distal Radius Dorsal Locking Plate with compatible screws |
| 94 | Plate - All Sizes |
| 95 | Cortical screw(Nonlocking) |
| 96 | Cortical screw(locking) |
| 97 | Cancellous screw(Locking) |
| 98 | Radius neck/head fixation plate with compatible screws |
| 99 | Plate - All Sizes |
| 100 | Cortical screw(Nonlocking) |
| 101 | Cortical screw(locking) |
| 102 | Cancellous screw(Locking) |
| 103 | Locking Olecranon Plate with compatible screws |
| 104 | Plate - All Sizes |
| 105 | Cortical screw(Nonlocking) |
| 106 | Cortical screw(locking) |
| 107 | Cancellous screw(Locking) |
| 108 | Low Profile Distal Medial Tibia Locking Plate with compatible screws |
| 109 | Plate - All Sizes |
| 110 | Cortical screw(Nonlocking) |
| 111 | Cortical screw(locking) |
| 112 | Cancellous screw(Locking) |
| 113 | Anatomical Distal Humerus Lateral Locking Plate with support |
| 114 | Plate- All sizes |
| 115 | Cortical screw(Nonlocking)- All sizes |
| 116 | Cortical screw(locking)- All sizes |
| 117 | Cancellous screw(Locking)- All sizes |
| 118 | Anatomical Distal Humerus Lateral Locking Plate without support |
| 119 | Plate - All Sizes |
| 120 | Cortical screw(Nonlocking) |
| 121 | Cortical screw(locking) |
| 122 | Cancellous screw(Locking) |
| 123 | Anatomical Distal Humerus Medial Locking Plate |
| 124 | Plate - All Sizes |
| 125 | Cortical screw(Nonlocking) |
| 126 | Cortical screw(locking) |
| 127 | Cancellous screw(Locking) |
| 128 | Locking Extraarticular Plate for Distal Humerus |
| 129 | Plate - All Sizes |
| 130 | Cortical screw(Nonlocking) |
| 131 | Cortical screw(locking) |
| 132 | Cancellous screw(Locking) |
| 133 | Small FragmentD.C.P.(3.5 mm hole) with compatible screws |
| 134 | Plate - All Sizes |
| 135 | Cortical screw |
| 136 | Cancellous screw |
| 137 | LockingFragmentD.C.P.(3.5 mm hole) with compatible screws |
| 138 | Plate - All Sizes |
| 139 | Cortical screw(Nonlocking) |
| 140 | Cortical screw(locking) |
| 141 | Cancellous screw(Locking) |
| 142 | LockingD.C.P. Narrow (4.5 mm hole) with compatible screws |
| 143 | Plate - All Sizes |
| 144 | Cortical screw(Nonlocking) |
| 145 | Cortical screw(locking) |
| 146 | Cancellous screw(Locking) |
| 147 | LockingD.C.P. Broad (4.5 mm hole) with compatible screws |
| 148 | Plate - All Sizes |
| 149 | Cortical screw(Nonlocking) |
| 150 | Cortical screw(locking) |
| 151 | Cancellous screw(Locking) |
| 152 | Proximal Humerus Locking Plate(PHILOS) with compatible screws |
| 153 | Plate - All Sizes |
| 154 | Cortical screw(Nonlocking) |
| 155 | Cortical screw(locking) |
| 156 | Cancellous screw(Locking) |
| 157 | Distal Femoral Lateral Anatomical contoured Locking Plate with compatible screws |
| 158 | Plate - All Sizes |
| 159 | Cortical screw(Nonlocking) |
| 160 | Cortical screw(locking) |
| 161 | Cancellous screw(Locking) |
| 162 | Set |
| 163 | Proximal Femoral Anatomical contoured Locking Plate with compatible screws |
| 164 | Plate - All Sizes |
| 165 | Cortical screw(Nonlocking) |
| 166 | Cortical screw(locking) |
| 167 | Cancellous screw(Locking) |
| 168 | Set |
| 169 | Distal Tibia Anatomical Posterior Locking Plate with compatible screws |
| 170 | Plate - All Sizes |
| 171 | Cortical screw(Nonlocking) |
| 172 | Cortical screw(locking) |
| 173 | Cancellous screw(Locking) |
| 174 | Distal Femoral Anatomical Medial Locking Plate with compatible screws |
| 175 | Plate - All Sizes |
| 176 | Cortical screw(Nonlocking) |
| 177 | Cortical screw(locking) |
| 178 | Cancellous screw(Locking) |
| 179 | Proximal Tibia Anatomical Contoured Locking Plate(Hockey Plate) |
| 180 | Plate - All Sizes |
| 181 | Cortical screw(Nonlocking) |
| 182 | Cortical screw(locking) |
| 183 | Cancellous screw(Locking) |
| 184 | Set |
| 185 | T Plate (4.5 mm hole) for Proximal Tibia (Locking) |
| 186 | Plate - All Sizes |
| 187 | Cortical screw |
| 188 | Cancellous screw |
| 189 | Set |
| 190 | Potero-Medial Proximal TibialLocking Plate with compatible screws |
| 191 | Plate - All Sizes |
| 192 | Cortical screw(Nonlocking) |
| 193 | Cortical screw(locking) |
| 194 | Cancellous screw(Locking) |
| 195 | Locking RAFT Plate for Proximal Tibia with compatible screws |
| 196 | Plate - All Sizes |
| 197 | Cortical screw(Nonlocking) |
| 198 | Cortical screw(locking) |
| 199 | Cancellous screw(Locking) |
| 200 | Locking Distal Fibula Anatomical Plate with compatible screws |
| 201 | Plate - All Sizes |
| 202 | Cortical screw(Nonlocking) |
| 203 | Cortical screw(locking) |
| 204 | Cancellous screw(Locking) |
| 205 | K nail (All sizes) |
| 206 | Locking Calcaneum Plate with compatible screws |
| 207 | Plate - All Sizes |
| 208 | Cortical screw(Nonlocking) |
| 209 | Cortical screw(locking) |
| 210 | Cancellous screw(Locking) |
| 211 | Metaphyseal Locking Plate For Distal Medial Tibia with compatible screws |
| 212 | Plate - All Sizes |
| 213 | Cortical screw(Nonlocking) |
| 214 | Cortical screw(locking) |
| 215 | Cancellous screw(Locking) |
| 216 | Anatomical Locking Antero-lateral Plate for Distal Tibia with compatible screws |
| 217 | Plate - All Sizes |
| 218 | Cortical screw(Nonlocking) |
| 219 | Cortical screw(locking) |
| 220 | Cancellous screw(Locking) |
| 221 | Trochanteric Locking Plate (Proximal Femur Locking Plate) with compatible screws |
| 222 | Plate-All sizes |
| 223 | Cortical screw(Nonlocking) |
| 224 | Cortical screw(locking) |
| 225 | Cancellous screw(Locking) |
| 226 | Cortical screw self tapping |
| 227 | 2.4 mm Cortical screw self tapping |
| 228 | 2.7 mm Cortical screw self tapping |
| 229 | 3.5 mm Cortical screw self tapping |
| 230 | 4.5 mm Cortical screw self tapping |
| 231 | 6.5 mm Cancelleous Bone screw |
| 232 | 6.5 mm Cancelleous Bone screw 10 mm Threaded |
| 233 | 6.5 mm Cancelleous Bone screw 16 mm Threaded |
| 234 | 6.5 mm Cancelleous Bone screw 32 mm Threaded |
| 235 | 6.5 mm Cancelleous Bone screw Full Threaded |
| 236 | 6.5 mm CannulatedCancelleous Bone screw |
| 237 | 6.5 mm CannulatedCancelleous Bone screw 10 mm Threaded |
| 238 | 6.5 mm CannulatedCancelleous Bone screw 16 mm Threaded |
| 239 | 6.5 mm CannulatedCancelleous Bone screw 32 mm Threaded |
| 240 | 6.5 mm CannulatedCancelleous Bone screw Full Threaded |
| 241 | Set |
| 242 | 7 mm Cannulatedcancelleous screw 10mm threaded |
| 243 | 4 mm Cancellous Bone screw |
| 244 | 4 mm Cancellous Bone screwPartially Threaded |
| 245 | 4 mm Cancellous Bone screw Fully Threaded |
| 246 | 4 mm CannulatedCancellous Bone screw |
| 247 | 4 mm CannulatedCancellous Bone screw Partial Threaded |
| 248 | 4 mm CannulatedCancellous Bone screw FullyThreaded |
| 249 | Set |
| 250 | 4.5 mm Cancellous Bone screw self tapping |
| 251 | Locking Cancellous Bone screw self tapping |
| 252 | 3.5 mm Locking Cancellous Bone screw self tapping |
| 253 | 4.0 mm Locking Cancellous Bone screw self tapping |
| 254 | 5.0 mm Locking Cancellous Bone screw self tapping |
| 255 | 6.5mm Locking Cancellous Bone screw self tapping |
| 256 | Locking Cortical screw self tapping |
| 257 | 2.4 mm Locking Cortical screw self tapping |
| 258 | 2.7 mm Locking Cortical screw self tapping |
| 259 | 3.5 mm Locking Cortical screw self tapping |
| 260 | 4.0 mm Locking Cortical screw self tapping |
| 261 | 5.0 mm Locking Cortical screw self tapping |
| 262 | Herbert screw |
| 263 | Herbert screw (2.5mm) |
| 264 | Herbert screw (3.5mm) |
| 265 | Herbert screw (4.5mm) |
| 266 | Herbert screw (6.5mm) |
| 267 | set |
| 268 | DHS plate 135 degree short barrel with compatible screws |
| 269 | Plate |
| 270 | Cortical screw |
| 271 | DHS Lag Screw |
| 272 | DHS Plate 130 |
| 273 | DHS Plate 135 |
| 274 | DHS Plate 145 |
| 275 | 7.5 mm Cannulatedcancellous Bone screw |
| 276 | 7.5 mm CannulatedCancellous Bone screw Partially Threaded |
| 277 | 7.5 mm CannulatedCancellous Bone screw Fully Threaded |
| 278 | Set |
| 279 | Malleolar screw 4.5 mm |
| 280 | Reconstruction locking Plate-(3.5 mm Hole) |
| 281 | Plate - All Sizes |
| 282 | Cortical screw(Nonlocking) |
| 283 | Cortical screw(locking) |
| 284 | Cancellous screw(Locking) |
| 285 | Anatomcial Locking pre-contoured Plate for Clavicle |
| 286 | Plate - All Sizes |
| 287 | Cortical screw |
| 288 | Cancellousscrewss |
| 289 | Anatomcial locking Superior clavicle Plate with compatible screws |
| 290 | Plate - All Sizes |
| 291 | Cortical screw(Nonlocking) |
| 292 | Cortical screw(locking) |
| 293 | Cancellous screw(Locking) |
| 294 | Anatomical Locking Clavicle Hook plate for Clavicle |
| 295 | Plate - All Sizes |
| 296 | Cortical screw(Nonlocking) |
| 297 | Cortical screw(locking) |
| 298 | Cancellous screw(Locking) |
| 299 | DHS plate 135 degree long barrel with compatible screws |
| 300 | Plate - All Sizes |
| 301 | Cortical screw |
| 302 | DHS Lag Screw |
| 303 | DHS Plate 130 |
| 304 | DHS Plate 135 |
| 305 | DHS Plate 145 |
| 306 | DHS with trochanteric stabilization plate 135 degreelong barrel with compatible screws |
| 307 | DHS Plate |
| 308 | Trochanteric Stabilization plate |
| 309 | DHS Lag Screw |
| 310 | Cortical screw(Nonlocking) |
| 311 | Cortical screw(locking) |
| 312 | Cancellous screw(Locking) |
| 313 | DCS plate - 95 degree with Compatible screws |
| 314 | Plate - All Sizes |
| 315 | Cortical screw |
| 316 | DCS screw |
| 317 | DHS plate - 135 degree angle long barrel with locking plate with compatible screws |
| 318 | DHS Plate |
| 319 | DHS Lag Screw |
| 320 | Cortical screw(Nonlocking) |
| 321 | Cortical screw(locking) |
| 322 | Cancellous screw(Locking) |
| 323 | DCS plate - 95 degree angel long barrel with locking plate with compatible screws |
| 324 | Plate - All Sizes |
| 325 | Cortical screw(Nonlocking) |
| 326 | Cortical screw(locking) |
| 327 | Cancellous screw(Locking) |
| 328 | DCS screw |
| 329 | Elastic nail(Titanium)-All Diameters |
| 330 | Charley"s device for Ankle Arthrodesis |
| 331 | Charley"s device for Knee Arthrodesis |
| 332 | Square nailRadius / Ulna |
| 333 | Steinman pin (sterile) |
| 334 | Rush nail |
| 335 | Ender"snail |
| 336 | Moore"s Pin |
| 337 | Bipolar prosthesis (sterilized) Fenestrated / Non Fenestrated |
| 338 | Cement Restrictor for Bipolar Stem |
| 339 | Disposable sterile cement sryinge kit. |
| 340 | Mini Fragment Plate (1.5mm) with compatible screws |
| 341 | Plate - All Sizes |
| 342 | Cortical screw |
| 343 | Cancellous screw |
| 344 | Mini DCP Plate (2.0 mm) with compatible screws |
| 345 | Plate - All Sizes |
| 346 | Cortical screw |
| 347 | Cancellous screw |
| 348 | Mini DCP Plate (2.5-2.7 mm) with compatible screws |
| 349 | Plate - All Sizes |
| 350 | Cortical screw |
| 351 | Cancellous screw |
| 352 | Eight plate for deformity correction (Titanium) with compatible screws (Bolts - Locking & Non Locking) |
| 353 | Plate-Allsizes |
| 354 | Cortical screw-All sizes |
| 355 | Cancellous screw-All sizes |
| 356 | Curved pelvic Reconstruction plate with compatible screws |
| 357 | Plate - All Sizes |
| 358 | Cortical screw |
| 359 | Cancellous screw |
| 360 | Anatamical pelvic plate with compatible screws |
| 361 | Plate - All Sizes |
| 362 | Cortical screw |
| 363 | Cancellous screw |
| 364 | Straight pelvic reconstruction plate with compatible screws |
| 365 | Plate - All Sizes |
| 366 | Cortical screw |
| 367 | Cancellous screw |
| 368 | Y-Shapepelvic reconstruction plate with compatible screws |
| 369 | Plate - All Sizes |
| 370 | Cortical screw |
| 371 | Cancellous screw |
| 372 | Straightpelvic reconstruction Locking plate with compatible screws |
| 373 | Plate - All Sizes |
| 374 | Cortical screw(Nonlocking) |
| 375 | Cortical screw(Locking) |
| 376 | Cancellous screw(Locking) |
| 377 | Spring plate for fracture Acetubalum with compatible screws |
| 378 | Plate - All Sizes |
| 379 | Cortical screw |
| 380 | Cancellous screw |
| 381 | J Plate for Anterior column fracture fixation with compatible screws |
| 382 | Plate - All Sizes |
| 383 | Cortical screw |
| 384 | Cancellous screws |
| 385 | Tension Band wire |
| 386 | S.S. wire - cable |
| 387 | Drill Bit |
| 388 | Drill Bit 2.5 mm |
| 389 | Drill Bit 2.7 mm |
| 390 | Drill Bit 3.2 mm |
| 391 | Drill Bit 4.0 mm |
| 392 | Drill Bit 4.5 mm |
| 393 | Drill Bit 4.8 mm |
| 394 | Drill Bit 6.5 mm |
| 395 | Drill Bit Long/Cannulated - 2.7mm/4.0mm |
| 396 | Modified Hydroxiapatite blocks - small size. |
| 397 | Modified Hydroxiapatite blocks - Medium size. |
| 398 | Modified Hydroxiapatite Granules. |
| 399 | Bone cement (PMMA) 40gm – High viscosity |
| 400 | Bone cement (PMMA) 40gm – low viscosity |
| 401 | Absorbable calcium sulfate antibiotic carrier-5ml |
| 402 | Absorbable calcium sulfate antibiotic carrier-10ml |
| 403 | Puddu Plate (High Tibial Osteotomy) with compatible screws |
| 404 | Plate |
| 405 | Cortical screws |
| 406 | Cancellous screws |
| 407 | 120 degree Double Angle Blade Plate with compatible screws |
| 408 | Plate - All Sizes |
| 409 | Cortical screw |
| 410 | Cancellous screws |
| 411 | Instrument set double angel |
| 412 | 95 degreeBlade Plate with compatible screws |
| 413 | Plate - All Sizes |
| 414 | Cancellous screw |
| 415 | Cortical screws |
| 416 | Instrument set |
| 417 | Washer for CC screw 4.00 mm, 6.5 mm/ 7mm. |
| 418 | PEDIATRIC RING FIXATION SYSTEM (SS Half Rings 40mm, 50mm, 60mm, 70mm, 80mm, 90mm, 100mm, 110mm ) |
| 419 | Twisted plate - 90deg. |
| 420 | Bushings |
| 421 | Mini Universal Joint Assembly. |
| 422 | Threaded Rods 40mm, 60mm, 80mm, 100mm, 120mm, 150mm, 200mm |
| 423 | Telescopic Rod. 40mm, 60mm, 80mm |
| 424 | Post male 2H, 3H, 4H |
| 425 | Post Female 2H, 3H, 4H |
| 426 | Hings Male. STANDARD |
| 427 | Hings Female. STANDARD |
| 428 | Oblique Supports |
| 429 | Wire fixation bolt cannulated (centric) |
| 430 | Wire fixation bolt slotted (eccentric) |
| 431 | Connection Bolts : 5mm, 10mm, 16mm |
| 432 | Nut 5mm |
| 433 | Nylon nut 5mm |
| 434 | Washer 1mm, 1.5mm |
| 435 | Washer : Slotted |
| 436 | Plate Adaptor : 20mm, 30mm |
| 437 | Italian Arch - All Sizes |
| 438 | Wires : Without Stoppers |
| 439 | Size: Dia 1.0mm×Length 250mm |
| 440 | Size: Dia 1.2mm×Length 300mm |
| 441 | Size: Dia 1.5mm×Length 300mm |
| 442 | Wires : Without Stoppers (Single piece) |
| 443 | Size: Dia 1.0mm×Length 250mm |
| 444 | Size: Dia 1.2mm×Length 300mm |
| 445 | Size: Dia 1.5mm×Length 300mm |
| 446 | Block for Half pins 1h,2h |
| 447 | Wire Fixation buckle |
| 448 | Conical Washer Couple |
| 449 | RING FIXATION SYSTEM |
| 450 | Half rings dia 60mm, 80mm, 100mm, 110mm, 120mm, 130mm, 140mm, 150mm, 160mm, 180mm, 200mm, 240mm |
| 451 | 5/8 Rings Dia 100mm, 110mm, 120mm, 130mm, 140mm, 150mm, 160mm, 180mm, 200mm |
| 452 | Italian Femoral Arches 90deg Small |
| 453 | Italian Femoral Arches 90deg Large |
| 454 | Italian Femoral Arches 120deg Small |
| 455 | Italian Femoral Arches 120deg Large |
| 456 | Arches with Holes (Internal Diameter) 90mm, 110mm, 140mm |
| 457 | Threaded Rods 40mm, 60mm, 80mm, 100mm, 120mm, 150mm, 200mm, 250mm, 300m, 350mm, 400mm. |
| 458 | Telescopic Rod. 100mm, 150mm, 200mm, 250mm, 300mm, 350mm, 400mm. |
| 459 | Graduated Telescopic Rods 60mm, 100mm, 150mm, 200mm, 250mm |
| 460 | Post Female 2Holes, 3Holes, 4Holes |
| 461 | Post Male 2Holes, 3Holes, 4Holes |
| 462 | Hing Female Standard, Low profile |
| 463 | Hing Male Standard, Low profile |
| 464 | Short Connection Plate 2Holes-35mm, 3Holes-45mm, 4H-55mm, 5H-65mm, 6H-75mm, 7H-85mm, 8H-95mm, 9H-105mm, 10H-115mm |
| 465 | Long Connection Plate 8Holes-155mm, 12H-235mm, 17H-335mm |
| 466 | Connected plates with Threaded Ends 5H-135mm, 7H-175mm, 9H-215mm |
| 467 | Twisted plates 3H-65mm, 4H-85mm |
| 468 | Curved plate 3 holes |
| 469 | Bushings |
| 470 | Connection Bolts 10mm, 16mm, 20mm, 30mm |
| 471 | Nut 6mm, 13mm |
| 472 | Nylon internet Nut |
| 473 | Square Nut |
| 474 | Spacing Washer 1.5mm & 2.00mm |
| 475 | Split Locking Washer 2.00mm |
| 476 | Flat sided washers 2.00mm, 4.00mm |
| 477 | Slotted Washer 4.0mm |
| 478 | Conical Washer Couple |
| 479 | Star Washer |
| 480 | Wire fixation Bolt slotted |
| 481 | Squre Nut |
| 482 | Wire fixation bolt canulated |
| 483 | Wire Fixation Bolt Cannulated with threaded haed |
| 484 | Blocks for Half Pins 1H, 2H, 3H, 4H, 5H |
| 485 | Wire Bayonet Point-Cortical 1.5mm×300mm |
| 486 | Wire Bayonet Point-Cortical 1.8mm×370mm |
| 487 | Wire Bayonet Point-Cancellous 1.5mm×300mm |
| 488 | Wire Bayonet Point-Cancellous 1.8mm×370mm |
| 489 | Wire With Stopper (Bayonet Point) 1.5×300mm |
| 490 | Wire With Stopper (Bayonet Point) 1.8×400mm |
| 491 | Rings With Curved Extermities 120mm, 130mm, 150mm, 160mm |
| 492 | Cannulated Knurling bolt |
| 493 | Kunrling post male |
| 494 | Tapered pin 5mm to 6mm Length 110mm Threaded Length 30/10mm |
| 495 | Tapered pin 5mm to 6mm Length 130mm Threaded Length 30mm |
| 496 | Tapered pin 5mm to 6mm Length 130mm Threaded Length 40mm |
| 497 | Tapered pin 5mm to 6mm Length 130mm Threaded Length 50mm |
| 498 | Tapered pin 5mm to 6mm Length 150mm Threaded Length 30mm |
| 499 | Tapered pin 5mm to 6mm Length 150mm Threaded Length 40mm |
| 500 | Tapered pin 5mm to 6mm Length 150mm Threaded Length 50mm |
| 501 | Tapered pin 5mm to 6mm Length 170mm Threaded Length 40mm |
| 502 | Tapered pin 5mm to 6mm Length 170mm Threaded Length 50mm |
| 503 | Tapered pin 5mm to 6mm Length 170mm Threaded Length 60mm |
| 504 | Tapered pin 5mm to 6mm Length 200mm Threaded Length 40mm |
| 505 | Tapered pin 5mm to 6mm Length 170mm Threaded Length 50mm |
| 506 | Tapered pin 5mm to 6mm Length 170mm Threaded Length 60mm |
| 507 | Tapered pin 3.5mm to 4.5mm Length 100mm Thread Length 20mm |
| 508 | Tapered pin 3.5mm to 4.5mm Length 100mm Thread Length 30mm |
| 509 | Tapered pin 3.5mm to 4.5mm Length 120mm Thread Length 30mm |
| 510 | Tapered pin 3.5mm to 4.5mm Length 120mm Thread Length 40mm |
| 511 | Tapered pin 5mm to 6mm (Titanium) Length 170mm Thread Length 30mm |
| 512 | Tapered pin 5mm to 6mm (Titanium) Length 170mm Thread Length 40mm |
| 513 | Tapered pin 5mm to 6mm (Titanium) Length 170mm Thread Length 50mm |
| 514 | Tapered pin 5mm to 6mm (Titanium) Length 170mm Thread Length 60mm |
| 515 | Tapered pin 5mm to 6mm (Titanium) Length 200mm Thread Length 30mm |
| 516 | Tapered pin 5mm to 6mm (Titanium) Length 200mm Thread Length 40mm |
| 517 | Tapered pin 5mm to 6mm (Titanium) Length 200mm Thread Length 50mm |
| 518 | Tapered pin 5mm to 6mm (Titanium) Length 200mm Thread Length 60mm |
| 519 | Tapered pin 5mm to 6mm (Titanium) Length 130mm Thread Length 30mm |
| 520 | Tapered pin 5mm to 6mm (Titanium) Length 130mm Thread Length 40mm |
| 521 | Tapered pin 5mm to 6mm (Titanium) Length 130mm Thread Length 60mm |
| 522 | Tapered pin 5mm to 6mm (Titanium) Length 150mm Thread Length 30mm |
| 523 | Tapered pin 5mm to 6mm (Titanium) Length 150mm Thread Length 40mm |
| 524 | Tapered pin 5mm to 6mm (Titanium) Length 150mm Thread Length 60mm |
| 525 | The Rail Fixation System |
| 526 | Rail fixation system 240mm long |
| 527 | Rail fixation system 300mm long |
| 528 | Rail fixation system 400mm long |
| 529 | Rail fixation system 600mm long |
| 530 | Tappered Half pin , 6*40*130, 6*50*130, 6*30*150, 6*40*150, 6*50*150, 6*40*200, 6*50*200, 6*60*200, 6*30*130 |
| 531 | Allen key 6mm |
| 532 | Central Clamp |
| 533 | End Clamp |
| 534 | Swivel Clamp |
| 535 | Ball & Socket Clamp Standard |
| 536 | T-Ball & Socket Clamp |
| 537 | Graduated Swivel Clamp |
| 538 | Dyna ring |
| 539 | T Clamp |
| 540 | Sandwitch Plate |
| 541 | Bolt for Sandwitch plate |
| 542 | Elbow clamp |
| 543 | Metaphyseal clamp for Rail Fixator |
| 544 | Multi Axial clamp |
| 545 | CD Unit 40mm |
| 546 | CD Unit 80mm |
| 547 | CD Unit 100mm |
| 548 | Square CD Unit 40mm |
| 549 | Square CD Unit 80mm |
| 550 | Square CD Unit 100mm |
| 551 | Advanced CD Unit 40mm |
| 552 | Advanced CD Unit 80mm |
| 553 | Advanced CD Unit 100mm |
| 554 | Rail Fixation System : Pediateric / CD Unit - Pediatric |
| 555 | Rail-Pediatric 150mm |
| 556 | Rail-Pediatric 200mm |
| 557 | Rail-Pediatric 250mm |
| 558 | Central Clamp-Pediatric |
| 559 | End Clamp-Pediatric |
| 560 | Swivel Clamp-Pediatric |
| 561 | T Clamp-Pediatric |
| 562 | T Ball & socket clamp |
| 563 | Mini Rail fixator Vertical Axis |
| 564 | Mini Rail fixator Horizontal Axis |
| 565 | CTEV JESS distractor set |
| 566 | JESS distractor 50mm, 75mm, 100mm, 150mm, 200mm, 250mm, 300mm, 350mm, with Allen key, with two schanz screw cortical and two cancellous in all size |
| 567 | Distractor double hole 6mm×150mm |
| 568 | Distractor double hole 6mm×200mm |
| 569 | Distractor double hole 6mm×250mm |
| 570 | Distractor double hole 6mm×300mm |
| 571 | Fish mouth Distractor 6mm×150mm |
| 572 | Fish mouth Distractor 6mm×200mm |
| 573 | Fish mouth Distractor 6mm×250mm |
| 574 | Fish mouth Distractor 6mm×300mm |
| 575 | Link joint small |
| 576 | Link joint Medium |
| 577 | Link joint large |
| 578 | Straight (connecting) Rod 2.5mm 125mm, 150mm, 200mm |
| 579 | Straight (connecting) Rod 3mm 125mm, 150mm, 200mm |
| 580 | Straight (connecting) Rod 3.5mm 125mm, 150mm, 200mm |
| 581 | L-Rod 2.5mm × small, large |
| 582 | L-Rod 3mm × small, large |
| 583 | Z-Rods 2.5mm, 3mm, 4mm |
| 584 | Front thread (schanz) pin 2.5mm×100mm |
| 585 | Front thread (schanz) pin 3.5mm, 4.0mm×125mm |
| 586 | Allen keys 2.5mm, 3.0mm |
| 587 | Spanners 10mm |
| 588 | JESS-ADULTS |
| 589 | JESS Fixator for Distal Radius- double hole |
| 590 | Distractor rods 75mm, 100mm, 150mm, 200mm, 250mm, 300mm, |
| 591 | Threaded 3.5mm & 2.5mm Schanz pins |
| 592 | Mini JESS Fixator |
| 593 | 50mm, 75mm, Rods |
| 594 | 1.5/1.8mm K wires |
| 595 | External Fixator |
| 596 | Denham pin |
| 597 | Universal clamps |
| 598 | Rod to Rod connecting clamps |
| 599 | T-clamps |
| 600 | AO CLAMP SINGLE PIN |
| 601 | AO CLAMP DOUBLE PIN |
| 602 | TUBE TO TUBE CLAMP |
| 603 | TRANSE CLAMP |
| 604 | SENZ PIN 2.5MM, 3.5MM, |
| 605 | SENZ PIN 4.5*150*16TH, 4.5*80*32TH, 4.5*180*32TH, 4.5*200*32TH |
| 606 | ST PIN 3.5MM, 4.0MM, 4.5MM, 5 mm |
| 607 | MINI CLAMP |
| 608 | Hybrid Fixator |
| 609 | TUBULAR ROD 200MM, 250MM, 300MM, 350MM, 400MM, 450MM |
| 610 | AO CLAMP SINGLE PIN |
| 611 | AO CLAMP DOUBLE PIN |
| 612 | TUBE TO TUBE CLAMP |
| 613 | TRANSE CLAMP |
| 614 | SENZ PIN 2.5MM, 3.5MM, |
| 615 | SENZ PIN 4.5*150*16TH, 4.5*80*32TH, 4.5*180*32TH, 4.5*200*32TH |
| 616 | ST PIN 3.5MM, 4.0MM, 4.5MM, 5 mm |
| 617 | WIRE P CORTICAL |
| 618 | WIRE P CORTICAL WITH STOPPER |
| 619 | POST MALE |
| 620 | POST FEMALE |
| 621 | WIRE FIXATION SLOTTED |
| 622 | WIRE FIXATION BOLT CANNULATED |
| 623 | NUT |
| 624 | CONNECTING BOLT |
| 625 | 5/8 RING 140,160,180,200MM |
| 626 | HALF RING 140, 160, 180, 200MM |
| 627 | Implant For Arthroscopy & related / ACL/PCL reconstruction set (Fixed Loop) |
| 628 | Fixed Loop with button - All sizes. |
| 629 | Titanium interference screws |
| 630 | ACL/PCL reconstruction set (Fixed Loop) |
| 631 | Fixed Loop with button - All sizes. |
| 632 | Bio interference screws |
| 633 | ACL/PCL reconstruction set (Adjustable Loop) |
| 634 | Adjustable Loop with button - All sizes |
| 635 | Titanium interference screws - All sizes. |
| 636 | ACL/PCL reconstruction set (Adjustable Loop) |
| 637 | Adjustable Loop with button - All sizes |
| 638 | Bio interference screws |
| 639 | ALL inside Meniscal Repair Device. |
| 640 | Meniscal Repair Needle pair preloaded with fibre wire size "2-0/0" for inside out meniscal repair |
| 641 | Fibertape |
| 642 | Fiber wire no. 2-0 |
| 643 | Fiber wire no. 0 |
| 644 | Fiber wire no. 2 |
| 645 | Suture disc |
| 646 | AC joint Button |
| 647 | Shaver Blade 4.7mm(attachable toConmed Shaver system) |
| 648 | Shaver Blade 5.5 mm(attachable toConmed Shaver system) |
| 649 | Tibial post screw 6.5mm with washer- All sizes |
| 650 | Spike Ligament staple. - All sizes |
| 651 | Radio Frequency Ablator Prob compatible with Conmed RF System |
| 652 | Titanium 5mm Suture Anchor double loaded with needles |
| 653 | Bio absorable 5mm Suture Anchor double loaded with needles |
| 654 | Titatinium 1.5-1.9 mm Suture Anchor |
| 655 | Bio absorable 1.5-1.9 mm Suture Anchor |
| 656 | Titanium 1.5-1.9 mm Suture Anchor with needle. |
| 657 | Bio absorbable 1.5-1.9 mm Suture Anchor with needle. |
| 658 | Titanium 2.5-2.8 mm Suture Anchor. |
| 659 | Bio absorable 2.5-2.8 mm Suture Anchor. |
| 660 | Titanium 2.5-2.8 mm Suture Anchor with needle. |
| 661 | Bio absorable 2.5-2.8 mm Suture Anchor with needle. |
| 662 | All Suture Anchor (1.5-1.9mm) – Single Loaded and Double Loaded |
| 663 | Curved Suture lasso Loop Passer right & left with Nitinol Wire |
| 664 | Arthroscopic Cannula (6mm/7mm/8mm) |
| 665 | Knotless suture anchors (Bio / PEEK)2.4mm/ 5-5.5mm / 6-6.5mm |
| 666 | Arthroscopic burr (attachable toConmed Shaver system) – 5.5mm, 6mm |
| 667 | Spiked ligament Staples (Small, Medium, Large) |
| 668 | Rotator cuff repair disposable needle compatible with Conmed |
| 669 | Osteochondralautograft transfer system set |
| 670 | Latarjet Screw (Set of two) with instrumentation set |
| 671 | Flip cutter |
| 672 | Arthroscopy PasporCanula |
| 673 | SPINE IMPLANTS |
| 674 | Gardener Well’s tong |
| 675 | Crutch field tong |
| 676 | Pedicle screw - Titanium (4.5 mm, 5.5 mm, 6.5 mm, 7mm, 7.5 mm,) |
| 677 | Monoaxial screws - All sizes |
| 678 | Polyaxial Screws - All sizes |
| 679 | Reduction Screws- All sizes |
| 680 | connecting rods (Compatible with Above mentioned screws) - All sizes. |
| 681 | Uniaxial pedicle screw -All sizes |
| 682 | HA COATED Polyaxial titanium pedicle screw (4.5 mm, 5.5 mm, 6.5 mm, 7mm, 7.5 mm)-All sizes |
| 683 | Monoaxial screws - All sizes |
| 684 | Polyaxial Screws - All sizes |
| 685 | Reduction Screws- All sizes |
| 686 | connecting rods (Compatible with Above mentioned screws) - All sizes. |
| 687 | Uniaxial pedicle screw -All sizes |
| 688 | FENESTRATED Polyaxial titanium pedicle screw-(4.5 mm, 5.5 mm, 6.5 mm, 7mm, 7.5 mm)-All sizes |
| 689 | Monoaxial screws - All sizes |
| 690 | Polyaxial Screws - All sizes |
| 691 | Reduction Screws- All sizes |
| 692 | connecting rods (Compatible with Above mentioned screws) - All sizes. |
| 693 | Uniaxial pedicle screw -All sizes |
| 694 | Lateral mass screws – Titanium (3mm, 3.5mm, 4mm) |
| 695 | Lateral mass screws with smooth shank. (3mm, 3.5mm, 4mm) |
| 696 | Connecting rod for lateral mass screw (should be compatible with above screw) |
| 697 | Occipital plate |
| 698 | Plate - All sizes |
| 699 | Screw-All sizes(Locking) |
| 700 | C1C2 Trans Articular screws-All sizes |
| 701 | Cervical variable angle plate with screws (different length) |
| 702 | Plate - All sizes |
| 703 | Screw-All sizes(Non-Locking)-should be same make of plate |
| 704 | Cervical locking plate with locking screw head(different length) |
| 705 | Plate - All sizes |
| 706 | Screw-All sizes(Locking)-should be same make of plate |
| 707 | Percutaneous pedicle screw (Titanium) (4.5 mm, 5.5 mm, 6.5 mm) |
| 708 | Screw-All sizes. |
| 709 | Rods-All sizes.-should be same make of screw |
| 710 | Cage Titanium(7mm, 8 mm,9 mm,10 mm,11 mm,12 mm,13 mm,14 mm) |
| 711 | TLIF 0 degree lordotic-All sizes |
| 712 | TLIF 4 degree lordotic-All sizes |
| 713 | TLIF 8 degree lordotic-All sizes |
| 714 | PLIF 0 degree lordotic-All sizes |
| 715 | PLIF 4 degree lordotic-All sizes |
| 716 | PLIF 8 degree lordotic-All sizes |
| 717 | Cage PEEK (7mm, 8 mm,9 mm,10 mm,11 mm,12 mm,13 mm,14 mm) |
| 718 | TLIF 0 degree lordotic-All sizes |
| 719 | TLIF 4 degree lordotic-All sizes |
| 720 | TLIF 8 degree lordotic-All sizes |
| 721 | PLIF 0 degree lordotic-All sizes |
| 722 | PLIF 4 degree lordotic-All sizes |
| 723 | PLIF 8 degree lordotic-All sizes |
| 724 | OLIF cage Titanium (10 mm,11 mm,12 mm,13 mm,14 mm) 40, 45, 50, 55mm width |
| 725 | 0 degree lordotic -All sizes |
| 726 | 6 degree lordotic-All sizes |
| 727 | OLIF cage PEEK (10 mm,11 mm,12 mm,13 mm,14 mm) 40, 45, 50, 55mm width |
| 728 | 0 degree lordotic -All sizes |
| 729 | 6 degree lordotic-All sizes |
| 730 | Expandable Cage titanium (10mm,12 mm,14 mm,16 mm,18 mm)-All sizes |
| 731 | Mesh Cage titanium (10mm,12 mm,14 mm,16 mm,18 mm)-All sizes |
| 732 | Vertebroplasty needles with graduated marking and locking system. 11G size, (10cm, 15cm length) |
| 733 | Cervical disc spacer (Titanium) (6mm, 7mm, 8 mm,9 mm,10 mm)-All sizes |
| 734 | Cervical disc spaces (PEEK) (6mm, 7mm, 8 mm,9 mm,10 mm) |
| 735 | Cervical Anchoured cage (Cage with screws) (Titanium) (6mm, 7mm, 8 mm,9 mm,10 mm)-All sizes |
| 736 | Cervical Anchoured cage (Cage with screws) (PEEK) (6mm, 7mm, 8 mm,9 mm,10 mm)-All sizes |
| 737 | Pedicle hooks |
| 738 | Laminar hooks |
| 739 | Vertebroplasty cement |
| 740 | Kyphoplasty set with single balloon |
| 741 | Kyphoplasty set with double balloon |
| 742 | Fibrin Glue. (2ml) |
| 743 | Fibrin Glue. (4ml) |
| 744 | Spine biopsy needle 11G(10cm&15cm) |
| 745 | Tapered Rod.(3.5mm to 5.5mm) |
| 746 | Dominos connector. |
| 747 | Hartshill rectangle of various size. |
| 748 | ODONTOID screw-All sizes |
| 749 | Cobalt chromium rod (5.5mm, 6.0 mm)-All sizes |
| 750 | Transverse connectors – All sizes |
| 751 | Pediatric Pedical Screw (Small Tulip) – All sizes |
| 752 | Polyaxial screws |
| 753 | Monoaxial screw |
| 754 | Reduction screw |
| 755 | Uniaxial screw |
| 756 | Uniaxial Pedicle screw ( All Sizes) |
| 757 | Dual thread osteoporolic pedicle screw |
| 758 | ARTHROPLASTY |
| 759 | Total Knee Arthroplasty (TKR)- Vitamin E enriched Polyethylene option should be there |
| 760 | Cruciate Retaining (CR) TKR(with Cocr femoral component (Must be able to accept extension rod) tibia base plate (Titanium/Cocr), UHMWPE Liner (Regular CR/Ultracongruent) and all poly patella button)Tibial component must have a knee length of 35mm or longer |
| 761 | Posterior Stabilized (PS) TKR(with Cocr femoral component (Must be able to accept extension rod and the box must be compatible with high post semi-constrained type liner), tibia base plate (Titanium/Cocr), UHMWPE Stabilized Liner and all poly patella button) Width of the 100xcut must not be larger than individual Femur condyle after cut has been made. |
| 762 | Cruciate Retaining (CR) TKR(with Cocr femoral component (Must be able to accept extension rod), All poly monoblock UHMWPE tibia and all poly patella button) with option of Anterior an Posterior referencing femur and narrow (Gener specific) femur option. |
| 763 | Posterior Stabilized (PS) TKR(all Poly) (with Cocr femoral component, All poly monoblock UHMWPE tibia and all poly patella button) |
| 764 | Revision TKR Semi constraint total knee prosthesis including Femoral component (with the ability to accept any kind of metal augments & offset extension stem. Femoral Tantalum metal augment for distal & posterior femur-various sizes, wedges, sleeves, cones of tantalum with various sizes, offset stems, options for intramedullary and extramedullary instrumentations.) Femoral extension stem-various offset & sizes Tibial component with ability to accept various offset and sizes tibial (augmentation blocks), wedges & Offset extension, cones, sleeves, augments of tantalum with scratch fit, offset stems (multiple) Semi constraint tibial knee inserts -all sizes Metal tibial wages-step, hemi & full of various sizes and thickness Tibial extension stem-various offset & sizes for cemented and uncemented, partially coated |
| 765 | Revision TKR Hinged fully constraint total knee prosthesis(including stemmed Femoral component with the ability to accept any kind of metal augments, rotating platform stemmed tibial component with the ability to accept any kind of metal augments, cone, sleeve and constrained insert with bearing) |
| 766 | THR (UNCEMENTED METAL ON POLY ) Primary uncemented partially/fully coated femoral stem (Titanium alloy)-12/14 taper, collared and collarless option reduced lateral shoulder taper, wedge type, with a option of variable high offsets and various size. Thickness of coating (135mm to 180mm), Stem sizes (6, 8 to 15), Stem Tip – Rounded. METAL HEAD – Metal Femoral Head is made from highly polished cobalt chrome alloy (CoCr) comes with 28,32,36mm options and has a 12/14 taper, attach to a corresponding tapered femoral stem and articulates with a polyethylene liner With modularity in head size with neck length – at least 4. Uncementedacetabular cup component – Titanium porous coated (pore size 200-300 micron) (Thickness of coating 140 to 180mm) acetabular hemispherical uncemented component with tapered locking mechanism for liner multiple locking screws options OD-38 to 64mm with 2mm of increment Acetabular Highly Crosslinked Poly cup – Highly crosslink polyethylene option of neutral, 10*LPW, lateralized liner. 6.5 mm self tapping cancellous Titanium screws for acetabular cup |
| 767 | THR (UNCEMENTED CERAMIC ON POLY) Uncemented THR Stem shoul have an option of short microplasty stem |
| 768 | Primary uncemented partially/fully coated femoral stem (Titanium alloy)-12/14 taper, collared and collarless option reduced lateral shoulder taper, wedge type, with a option of variable high offsets and various size. Thickness of coating (135mm to 180mm), Stem sizes (6, 8 to 15), Stem Tip – Rounded. CERAMIC HEAD – Metal Femoral Head is made from highly polished cobalt chrome alloy (CoCr) comes with 28,32,36mm options and has a 12/14 taper, attach to a corresponding tapered femoral stem and articulates with a polyethylene liner With modularity in head size with neck length – at least 4.Uncementedacetabular cup component – Titanium porous coated (pore size 200-300 micron) (Thickness of coating 140 to 180mm) acetabular hemispherical uncemented component with tapered locking mechanism for liner multiple locking screws options OD-38 to 64mm with 2mm of incrementAcetabular Highly Crosslinked Poly cup – Highly crosslink polyethylene option of neutral, 10*LPW, lateralized liner. 6.5 mm self tapping cancellous Titanium screws for acetabular cup |
| 769 | THR (CEMENTED METAL ON POLY) |
| 770 | Cemented Femoral Stem(titanium alloy, Double Tapered)- 12/14 Taper,Collarless, reduced lateral shoulder taper, wedge typeMetal Modular Head 28mm, 32mm, 36mm, (12/14 Taper) with at least 4 variable Neck Length Cemented 10° Acetabular cup with LPW various sizes LPW Cemented Acetabular Cup femoral cement restrictorFemoral cement centerlizerDisposable cement gun & Pulsatile lavage. |
| 771 | THR (CEMENTED CERAMIC ON POLY) |
| 772 | Cemented Femoral Stem(titanium alloy, Double Tapered)- 12/14 Taper,Collarless, reduced lateral shoulder taper, wedge typeCERAMIC Modular Head 28mm, 32mm, 36mm, (12/14 Taper) with at least 4 variable Neck Length. Cemented 10° Acetabular cup with LPW various sizes LPW Cemented Acetabular Cup femoral cement restrictorFemoral cement centerlizer Disposable cement gun & Pulsatile lavage. |
| 773 | THR (HYBRID CERAMIC ON POLY) |
| 774 | Cemented Femoral Stem(titanium alloy, Double Tapered)- 12/14 Taper,Collarless, reduced lateral shoulder taper, wedge type with a option of having same instrument can be used for cemented and uncemented CERAMIC Modular Head 28mm, 32mm, 36mm. (12/14 Taper) with at least 4 variable Neck Length Uncementedacetabular cup component – Titanium porous coated (pore size 200-300 micron) (Thickness of coating 140 to 180mm) acetabular hemisphericaluncemented component with tapered locking mechanism for liner multiple locking screws options OD-38 to 64mm with 2mm of incrementAcetabular Highly crosslink polyethylene Cup Liner (28 mm ID) with 10° option and various sizes femoral cement restrictor Femoral cement centerlizerDisposable cement gun & Pulsatile lavage. |
| 775 | THR ( Hybrid CERAMIC ON POLY) |
| 776 | Cemented Femoral Stem(titanium alloy, Double Tapered)- 12/14 Taper,Collarless, reduced lateral shoulder taper, wedge type with a option of having same instrument can be used for cemented and uncementedMETALModular Head 28mm, 32mm, 36mm. (12/14 Taper) with at least 4 variable Neck LengthUncementedacetabular cup component – Titanium porous coated (pore size 200-300 micron) (Thickness of coating 140 to 180mm) acetabular hemispherical uncemented component with tapered locking mechanism for liner multiple locking screws options OD-38 to 64mm with 2mm of incrementAcetabular Highly crosslink polyethylene Cup Liner (28 mm ID) with 10° option and various sizes femoral cement restrictor Femoral cement centerlizerDisposable cement gun & Pulsatile lavage. |
| 777 | Cemented Modular Bipolar Hip Prosthesis – |
| 778 | Cemented Femoral Stem(titanium alloy, Double Tapered)- 12/14 Taper,Collarless, reduced lateral shoulder taper, wedge type with a option of having same instrument can be used for cemented and uncemented. Metal Modular Head 28mm (12/14 Taper) with at least 4 variable Neck Length Cemented Bipolar Hip System (Modular Type) --UHMWPE with cobalt chromium double polished metal back Internal Diameter -28mm, Self-centering option of Self centering Bipolar femoral cement restrictor Femoral cement centerlizer Disposable cement gun & Pulsatile lavage. |
| 779 | Non Cemented Modular Bipolar Hip Prosthesis – |
| 780 | Primary uncemented fully coated Femoral Stem (titanium alloy ,Double Tapered) - 12/14 taper, Collared and Collarless option , reduced lateral shoulder taper, wedge type, option of Variable high Offsets and various sizes |
| 781 | Modular Head 28mm, (12/14 tapper) with at least 4variable neck length non cemented bipolar hip system (Modular Type) – UHMWPE with cobalt chromium double polished metal back internal Diameter – 28mm, Self-centering option of self centering bipolar |
| 782 | Revision Cemented Hip System |
| 783 | Revision cemented highly polished triple taper collar less stem with length (upto 300mm) with options of sizes from 200 – upto 300 (long stem)Cemented 10 degree Acetabular cup with LPW variable neck length Femoral cement restrictor Femoral cement centerlizerDisposable cement gun and pulsatile lavage. |
| 784 | Revision cementless Hip System |
| 785 | UncementedRevisonacetabular cup component- Highly scratch fit porous coted titanium acetabular hemispherical uncemented component (size upto 68mm) with, tapered locking mechanism for linerlocking screws options of multi hole ,with the option of peripheral locking screw to accommodate 22,28,32,36mm head with same cup, option of VIP Taper ,Anti Rotational device mechanism for locking of different type of Liners Acetabular Highly CrosslinkedPolycup-Highly crosslink polyethylene option of neutral,10* LPW,lateralized liner CERAMIC HEAD-ceramic femoral head OD 28,32,36mm, size- compatible with ceramic Short, Medium, Long, X-Long. Tantalum coated wedges and augment for filling bone defects.TriflangedAccatabular cage plate. Modular Tumor Resection Prosthesis |
| 786 | Distal Femur Resection (Tumor Prosthesis ) |
| 787 | Femoral Component for Distal Femur Resection - (Cobalt Chromium Molybdenum Alloy) .Tibial Component for Distal Femur Resection - (Wrought Titanium - Aluminium Vanadium Alloy or Stainless Steel 316L) . Resection Pieces - (Wrought Titanium - Aluminium Vanadium Alloy or Stainless Steel 316L) with sizes from 40mm to 180mm with an increment of 10mm.Intramedullary Stem - (Wrought Titanium - Aluminium Vanadium Alloy) should be made available with a curved or a straight stem and with a length of 120mm and with a choice ofdifferent diameters |
| 788 | Proximal Tibial Resection(Tumor Prosthesis ) |
| 789 | Femoral Component for Proximal Tibial Resection - (Wrought Titanium - Aluminium Vanadium Alloy or Stainless Steel 316L). Tibial Component for Tibial Resection - (Cobalt Chromium Molybdenum Alloy).Resection Pieces - (Wrought Titanium - Aluminium Vanadium Alloy or Stainless Steel 316L) with sizes from 40mm to 180mm with an increment of 10mm. Intramedullary Stem - (Wrought Titanium - Aluminium Vanadium Alloy) should be made available with a curved or a straight stem and with a length of 120mm and with a choice ofdifferent diameters |
| 790 | Proximal Femur Resection(Tumor Prosthesis ) |
| 791 | Trochanteric Component for Proximal Femur Resection - (Cobalt Chromium Molybdenum Alloy). Trochanteric Component for Proximal Femur Resection - (Cobalt Chromium Molybdenum Alloy) . Resection Pieces - (Wrought Titanium - Aluminium Vanadium Alloy or Stainless Steel 316L) with sizes from 40mm to 180mm with an increment of 10mm.Intramedullary Stem - (Wrought Titanium - Aluminium Vanadium Alloy) should be made available with a curved or a straight stem and with a length of 120mm and with a choice of different diameters. Modular Heads with internal 12/14 taper to adapt with Trochanteric Components of the system in 22.200 and 28.000mm diameters with multiple neck length options, at least including -3.5mm, 0.0mm and +3.5mm.Modular Bipolar Cups, self-centering type with inner UHMWPE Liner and integrated stainless steel shell in outer diameters of 39mm to 53mm in 2mm increments |
| 792 | Total Femur Resection / (Tumor Prosthesis ) |
| 793 | Trochanteric Component for Proximal Femur Resection -(Cobalt Chromium Molybdenum Alloy).Femoral Component for Distal Femur Resection -(Cobalt Chromium Molybdenum Alloy). Tibial Component for Distal Femur Resection - (Wrought Titanium - Aluminium Vanadium Alloy or Stainless Steel 316L) . Resection Pieces - (Wrought Titanium - Aluminium Vanadium Alloy or Stainless Steel 316L) with sizes from 40mm to 180mm with an increment of 10mm.Intramedullary Stem - (Wrought Titanium - Aluminium Vanadium Alloy) should be made available with a curved or a straight stem and with a length of 120mm and with a choice of different diameters. Modular Heads with internal 12/14 taper to adapt with Trochanteric Components of the system in 22.200 and 28.000mm diameters with multiple neck length options, at least including -3.5mm, 0.0mm and +3.5mm.Modular Bipolar Cups, self-centering type with inner UHMWPE Liner and integrated stainless steel shell in outer diameters of 39mm to 53mm in 2mm increments |
| 794 | Total Shoulder replacement prosthesis |
| 795 | humeral stem with holes in fins for muscle and soft tissue Reconstruction-Uncemend or cemented both Options.Non Cemented Humeral Stem, Titanium. Stem Should be Available in Standard 122 mm Length & Mini 83 mm Length with Cemented &UnCememted Purpose.0.75mm thick Proximal PPS CoatingPorous Plasma Spray coating. proximally to enhance biologic fixation.45°/135° neck-shaft angle. Can be used as primary reverse or conversion.Humeral Head All sizes• 38 to 46mm in diameter with 4 mm Increments.• 18 to 27mm in height with 3 mm Increments.• Infinite offset options between 0.5 and 4.5mm with 1 mm Increments.Modular Hybrid Glenoid prosthesis crosslinked poly. • Small, medium and large.• 3 Peripheral pegs for Cemented Fixation. • Non-conforming diameter of curvature.• Polyethylene compression |
| 796 | HemiTotal Shoulder replacement prosthesis |
| 797 | 1. humeral stem with holes in fins for muscle and soft tissue Reconstruction-Uncemend or cemented both Options 2. Non Cemented Humeral Stem, Titanium. Stem Should be Available in Standard 122 mm Length & Mini 83 mm Length with Cemented &UnCememted Purpose.0.75mm thick Proximal PPS CoatingPorous Plasma Spray coating. proximally to enhance biologic fixation. 45°/135° neck-shaft angle.Can be used as primary reverse or conversion 3. Humeral Head All sizes. 38 to 46mm in diameter with 4 mm Increments.18 to 27mm in height with 3 mm Increments. Infinite offset options between 0.5 and 4.5mm with 1 mm Increments.Allows for accurate reproduction of natural anatomy |
| 798 | Reverse shoulder arthroplasty |
| 799 | Non Cemented Humeral Stem, Titanium.Stem Should be Available in Standard 122 mm Length & Mini 83 mm Length with 1 mm Increments in Diameter.0.75mm thick Proximal PPS Coating PPS® Porous Plasma Spray coating. proximally to enhance biologic fixation.45°/135° neck-shaft angle. Can be used as primary reverse or conversion.Can use for Both Cemented & Non-Cemented Purpose.humeral stem with holes in fins for muscle and soft tissue Reconstruction-Uncemend or cemented both Options. High mobility humeral polythelene cup inludes Bearing & Humeral Tray. humeral tray with lateral post-offset options designed to address medial overhang on smaller patients,allowing for greater range of motion Should be Available in 3 thickness Options (Std , +5 mm& +10 mm) to accomdate gap in case of Fracture Humeral Head. technology secures the bearing to the humeral tray,and can be assembled with finger force for ease of assembly intraoperatively. Highly Cross-Linked Polyethylene Humeral Bearing should be available inStandard, +3mm, +3mm retentive. Final Humeral Tray/Bearing inclination angle is at 57°/147.Glenoid implant with fixation screws .Hydroxyapatite (HA) over porous plasma spray, over titanium substrate.Minimum Size of BasePlateShould be25 mm Availableas Indian Population PatientGlenoid is very small .Glenosphere/Glenoid Head should be available in 36 mm & 40mm in diameter with 3 different heightoptions. Glenosphere allows for up to 4.5 mm of offset in any direction.Glenosphere can then be “dialed down” inferiorly and/or lateralized to address the concerns of scapular notching.Locking/Non Locking fixation screws.Modular 6.5 mm Central “compression” Screw, in lengths of 20–50 mm, in 5 mm increments, made from Titanium.Ability to target good bone with 12° of screw angulation with non-locking screws.4.75 mm Fixed-Angle Locking and Variable-Angle Non-Locking Screws, in lengths of 15–45 mm,in 5 mm increments, made from Titanium |
| 800 | Elbow Arthroplasty(ALL ARTHROPLASTY IMPLANTS must have minimum 15 years survivaship database published as registry data or clinical studies and should have USFDA/Indian FDA/CE certifications as specifrie. Long history of clinical success (more than 25 yrs) • Ability to size humeral and ulnar implant independently • Anterior flange for humeral stability |
| 801 | Humeral Component,various Sizes • Short flange • Regular (4”, 6” and 8”) • Small (4”, 6” and 8”) • Extra small (4” and 6”) • Long flange • Regular (6” and 8”) • Small (6” and 8”) • Sintered Titanium Beaded Surface on DistalHumeral Component • Triangular cross-section to match Humeral canal |
| 802 | Ulna Component Various Sizes • Plasma coating proximally for cement fixation • Quadrangle cross-section to match ulnar canal • Anatomic left and right • Ability to size ulnar implant independent of humeral implant – All ulna stems can be mated to all humeral stems • Regular - L & R (3.5” & 4.5”) • Small - L & R (3” & 4.5”) • Extra Small - L & R (3” & 4.5”) |
| 803 | Istrument Set / illzarov Set |
| 804 | - Stainless Steel Scale |
| 805 | - Box Spanner/ Tubular angulated wernch (Both for Bolt head & Nut) |
| 806 | - Angled and straight combination spanner (10mm,11mm,13mm) |
| 807 | - Drill Bitt 3.2/200mm |
| 808 | - Drill Bitt 3.5/200mm |
| 809 | - Drill Bitt 4.8/200mm |
| 810 | - Drill Bitt 4.5/200mm |
| 811 | - Screw Guide 8/6/100mm |
| 812 | - Drill Guide 6*5*80, 6*3, 2*80, 6*3, 2*40 |
| 813 | - Half Pin Introducer – Illizarow T Handle |
| 814 | - ST Pin |
| 815 | - Corticotome |
| 816 | - Osteotome (5mm, 10mm, 15mm, 20mm, 25mm, 30mm) |
| 817 | - D With Scale (Stainless Steel) |
| 818 | - Wire cutter |
| 819 | - Wire Bander (plier) |
| 820 | - Trocar |
| 821 | - Dynamometric wire Tensioner |
| 822 | Monorail Set |
| 823 | - Scale (Stainless steel) |
| 824 | - Trocar |
| 825 | - Half pin introducer |
| 826 | - Allen Key (4mm, 6mm) |
| 827 | - Drill Bit (2.7mm, 3.2mm, 3.5mm, 4.5mm, 4.8mm) (Length 200) |
| 828 | - Screw Guide (8*6*100) |
| 829 | - Screw Guide (8*6*60) |
| 830 | - Drill Guide (3.2*6*40) |
| 831 | - Drill Guide (6*5*40) |
| 832 | - Drill Guide (6*5*80) |
| 833 | - Template for end clamp |
| 834 | - Template for and Central Clamp |
| 835 | - Template for Swivel clamp |
| 836 | - Corticotome |
| 837 | - Osteotome (5mm, 10mm, 15mm, 20mm, 25mm, 30mm) |
| 838 | - D With Scale (Stainless Steel) |
| 839 | TENS NAILSET |
| 840 | IMPACTOR |
| 841 | AWL |
| 842 | EXTROCTER ROD |
| 843 | TOMMY BAR |
| 844 | SLOTTED HAMMER |
| 845 | NAIL INTRODUCER |
| 846 | KEY |
| 847 | BONE COMPRATION |
| 848 | DHS INSTRUMENTS SET |
| 849 | SCREW DRIVER |
| 850 | DRILL BIT |
| 851 | ST PIN |
| 852 | IMPACTOR |
| 853 | TAP |
| 854 | MEASURING DEVICE |
| 855 | TAP FOR 6.5MM SCREW |
| 856 | T COUPLING |
| 857 | TRIPLE REAMMER |
| 858 | COUPLING SLEEVE |
| 859 | COUPLING SCREW |
| 860 | DHS SCREW INCTRODUCEAR |
| 861 | T HANDLE |
| 862 | ANGILE GUIDE |
| 863 | DHS PLATE 130*,135*,145* |
| 864 | DHS LEG SCREW |
| 865 | CC SCREW 6.5MM |
| 866 | CORTICAL4.5MM |
| 867 | TIBIA NAIL SET |
| 868 | ZIG |
| 869 | CONICAL BOLT |
| 870 | IMPACTOR |
| 871 | GUIDE WIRE |
| 872 | T HAMMER |
| 873 | T HANDLE |
| 874 | KEY |
| 875 | ROD&HAMMER |
| 876 | REAMMER |
| 877 | SPANNER |
| 878 | AWL |
| 879 | DEPTH GAUGE |
| 880 | SCREW DRIVER |
| 881 | TROCAR |
| 882 | DRILL BIT |
| 883 | ST PIN |
| 884 | SLEEVE |
| 885 | 4 & 6.5MM CC SCREW AND MALLEOLAR SCREW SET |
| 886 | C.C TAB |
| 887 | DRILL BIT |
| 888 | GUIDE PIN |
| 889 | K WIRE |
| 890 | ST PIN |
| 891 | SCALE |
| 892 | C.C DRILL BIT |
| 893 | 4 MM CC SCREW DRIVER |
| 894 | 6.5 MM CC SCREW DRIVER |
| 895 | MALLEOLAR SCREW DRIVER |
| 896 | EXTERNAL FIXATOR SET |
| 897 | SPANNER |
| 898 | TRIPPLE TROCAR |
| 899 | DRILL BIT |
| 900 | DRILL BIT |
| 901 | DRILL BIT |
| 902 | T HANDLE |
| 903 | KEY |
| 904 | SPANNER |
| 905 | HYBRID FIXATOR SET |
| 906 | SPANNER |
| 907 | BOX SPANNER |
| 908 | PIN HOLDER |
| 909 | WIRE TENSER |
| 910 | TRIPPLE TROCAR |
| 911 | DRILL BIT 2.7 |
| 912 | DRILL BIT 3.2 |
| 913 | DRILL BIT 4 MM |
| 914 | SENZ PIN DRILL BIT 3.5MM, 4.5MM |
| 915 | T HANDLE |
| 916 | KEY |
| 917 | SCALE |
| 918 | NAIL REMOVAL SET |
| 919 | ROD AND HAMMER |
| 920 | SPANNER |
| 921 | KEY |
| 922 | SCREW DRIVER |
| 923 | SCREW REMOVAL SET |
| 924 | PLIER |
| 925 | KEY |
| 926 | HANDLE |
| 927 | HOLLOWMER |
| 928 | Pelvis Instruement Set |
| 929 | Straight ball spike 300mm |
| 930 | Universal Hex Screwdriver |
| 931 | Retractor |
| 932 | Drill Guider Q2.5 |
| 933 | Flexible Drill Bit Q2.5 |
| 934 | Tap Q3.5 |
| 935 | Drill Bit Q3.0 |
| 936 | Tap Q4.0 |
| 937 | Drill Bit Q2.5 |
| 938 | Drill/Tap Guider Q2.5/3.5 |
| 939 | Drill/Tap Guider Q3.0/4.0 |
| 940 | Screw Holder Forcep |
| 941 | Depth Gague 0-60mm |
| 942 | Bending Iron |
| 943 | Bone Holding Forcep 200mm |
| 944 | Reduction Forcep Straight |
| 945 | Reduction Forcep curved 250mm |
| 946 | Bone Holding Forcep 250mm |
| 947 | Pelvic Mould plate |
| 948 | Reconstruction Mould Plate |
| 949 | Reduction Forcep Curved 250mm |
| 950 | Pelvic Reconstruction Forcep Large 330mm |
| 951 | Pelvic Reconstruction Forcep with 2 Ball-tipped 400m |
| 952 | Pelvic Reconstruction Forcep with 2 High-Low Ball-tip |
| 953 | Pelvic Reconstruction Forcep with 3 Ball-tipped 400m |
| 954 | Plate Bender |
| 955 | Bone Hook |
| 956 | T-Handle Bone Hook |
| 957 | Aluminium Box |
| 958 | Shoulder Arthroscopy Instrument Set |
| 959 | Switching Stick |
| 960 | Labral Probe |
| 961 | Crochet Hook |
| 962 | Knot Pusher |
| 963 | Tissue Elevator 15°- Up |
| 964 | Tissue Elevator 15°- Down |
| 965 | Glenoid Rasp-Up |
| 966 | Glenoid Rasp-Down |
| 967 | Ring Curette |
| 968 | Suture Cutter |
| 969 | Suture Retreiver |
| 970 | Tissue Grasper with Lock |
| 971 | Reusable Suture Passer45°, Left |
| 972 | Reusable Suture Passer45°, Right |
| 973 | Reusable Suture PasserCrescent, Straight |
| 974 | Nitinol Loop Wire for Reusable Suture Passer |
| 975 | Graphic Case for Shoulder Arthroscopy Instruments (Small) |
| 976 | ACL/PCL Reconstruction Instrument Set |
| 977 | Drill Guide |
| 978 | Angled Bullet |
| 979 | ACL Elbow Aimer |
| 980 | PCL Tibial Aimer |
| 981 | PCL Femoral Aimer |
| 982 | Graft passing pin (Beadth pin), Spade tip, Dia. 4.7mm, Len. 410mm |
| 983 | Drill bit passing pin,dia.2.4mm |
| 984 | Graft passing pin (Beadth pin), Drill-tip |
| 985 | CannulatedTibial Reamer, Dia.7.0mm |
| 986 | CannulatedTibial Reamer, Dia.8.0mm |
| 987 | CannulatedTibial Reamer, Dia.9.0mm |
| 988 | CannulatedTibial Reamer, Dia.10.0mm |
| 989 | FLOWERTIPCannulated Femoral Reamer, Dia. 6.0mm |
| 990 | FLOWERTIPCannulated Femoral Reamer, Dia.7.0mm |
| 991 | FLOWERTIPCannulated Femoral Reamer, Dia.8.0mm |
| 992 | FLOWERTIPCannulated Femoral Reamer, Dia.9.0mm |
| 993 | Tunnel Plug, 9-10 mm |
| 994 | Cannulated screwdriver for Interference screws (for Titanium Screws) |
| 995 | Endoscopic Reamer for button with Loop, cannulated, dia.4.7mm |
| 996 | Depth Gauge for ACL/PCL reconstruction |
| 997 | Transportal Femoral Aimer ( Any One 5mm, 6mm,7mm) |
| 998 | Arthroscopic Probe |
| 999 | Microfracture Awl (Any One 20°, 30°, ,45°,60°) |
| 1000 | Graft Prep Station |
| 1001 | Graft Sizing Block ( 6, 6.5,7, 7.5,8,89.5,9,9.5,10,11,12mm dia) |
| 1002 | Tendon Stripper,Closed end (Any One 6mm, 7mm, 8mm) |
| 1003 | Tendon Stripper, Open end (Any One 6mm, 7mm,8mm) |
| 1004 | Rasp ( Any One Straight, Convex,Half-round) |
| 1005 | Notchplasty curette |
| 1006 | Femoral PCL Elevator |
| 1007 | Graphic Case for Knee Arthroscopy Instruments (Indian Make) for ACL-PCL |
| 1008 | INSTRUMENT SET FOR PRIMARY THR (CEMENTED) |
| 1009 | Accetabular reamer with handle |
| 1010 | Accetabular trial with insertion handle |
| 1011 | Alignment guide for accetabular cup |
| 1012 | Accetabular Holes drill with stopper & guide |
| 1013 | Accetabular cement copmression device with handle |
| 1014 | Box chiesel |
| 1015 | Charnley retractor |
| 1016 | Canal Opening reamer |
| 1017 | Lateral hip rasp |
| 1018 | Femoral broaches (All sizes) with two handles |
| 1019 | Trial femoral heads (Two sizes above and below neutral) |
| 1020 | Trial femoral stems |
| 1021 | Trial femoral Necks |
| 1022 | Femoral component insertion handle |
| 1023 | Cement restrictor insertion handle |
| 1024 | MCDonaldretrector (For cemented removal) |
| 1025 | Femoral head punch |
| 1026 | Accetabular cup compression device |
| 1027 | Murphy skid |
| 1028 | Accetabular retractor (Anterior 2 posterior) |
| 1029 | Bipolar Inferior retractor |
| 1030 | Steinman pin for retraction with handle |
| 1031 | INSTRUMENTS FOR PRIMARY THR - UNCEMENTED |
| 1032 | Charnley retractor |
| 1033 | Accetabularreames (38mm to 60mm) with handle |
| 1034 | AccetabularTrilals (All sizes) - Uncemented with insertion handle |
| 1035 | Accetabular liner trials - all sizes |
| 1036 | Accetabular shell screw drill bit |
| 1037 | Accetabular screw drill guide |
| 1038 | Acetabular screw depth gauge |
| 1039 | Accetabular screw Driver |
| 1040 | Box chiesel |
| 1041 | Canal opening reamer |
| 1042 | Lateralizrasp |
| 1043 | Femoral broaches (All sizes) with handles (two) -- s+d |
| 1044 | Trial femoral heads (Two size above and below neutral) |
| 1045 | Trail femoral necks |
| 1046 | Femoral component insertion handle |
| 1047 | Femoral component remover with slap hammer |
| 1048 | Femoral head punch |
| 1049 | Marphy skid |
| 1050 | Femoral offset broaches |
| 1051 | Curved deep hohmann retractors (anteriorposterior) |
| 1052 | Offset accetabular reamers |
| 1053 | Conical reamer for long fluted stem (Tapend type) |
| 1054 | Trials for long fluted stems with insertion handles |
| 1055 | Steinman pins for retraction with handle |
| 1056 | INSTRUMENMTY SET FOR PRIMARY TKR |
| 1057 | Femur intramedulary canal opening reamer |
| 1058 | Femur IM alignment rod with cutting block |
| 1059 | Angel wings |
| 1060 | 5 in one cutting block with pins |
| 1061 | Large medium & small saw blades |
| 1062 | Femoral AP Sizer |
| 1063 | Pins Puller |
| 1064 | Box Cutting guide zid |
| 1065 | Tibialextrameduallary cutting zig |
| 1066 | Tibial cutting block (Both sides) left & right with styles |
| 1067 | Gap assessment spacer blocks (All Sizes) |
| 1068 | Tibial& Femoral Trial componenst (CR Trials & PS Trials - All sizes) |
| 1069 | Polythene insert trails - all sizes -(PS &semiconstrained) |
| 1070 | Tibial base plate prepration guide with handle |
| 1071 | Tibialprepration bush with reamer |
| 1072 | Tibial keel prepration punch |
| 1073 | File /Rasp |
| 1074 | Femoral and tibial punch mountable on s wire lock handle |
| 1075 | Polythene lock / unlock device and punch |
| 1076 | Pattelasizer |
| 1077 | Caliper device |
| 1078 | Pattela cutting zig |
| 1079 | Pattela lug hole reamer |
| 1080 | pattelar button compression device |
| 1081 | Spanner (to attach extension rods to femur/tibia) |
| 1082 | Intramedullary reamer for extension rod |
| 1083 | IM extension rod trials |
| 1084 | Femoral and tibialextramedullary alignment rods |
| 1085 | Posterior bific (CR) retractor |
| 1086 | Posterior retractor (PS) for tibia |
| 1087 | Right angle Hohmann retractor |
| 1088 | DISPOSABLES |
| 1089 | TURP arthroscpy set |
| 1090 | Arthroscopy shoulder drape |
| 1091 | Arthroscopy Knee drape |
| 1092 | Arthroscopy camera cover |
| 1093 | Cling drape |
| 1094 | Surgical incise iodised drape (Ioban) |
| 1095 | Plastic C-Arm Cover |
| 1096 | Pulsatile lavage system |
| 1097 | Femoral stem centralizer |
| 1098 | Femoral cement restrictor |
| 1099 | Cement pressurizer gun kit |
| 1100 | Bone cement high viscosity – 40gm |
| 1101 | Bone cement high viscosity with gentamicin- 40gm |
| 1102 | Bone cement low viscosity with gentamicin- 40gm |
| 1103 | Arthroplasty Hip U drape |
| 1104 | Arm Pouch silling |
| 1105 | Knee Brace– All Sizes |
| 1106 | Knee cap |
| 1107 | BK Skin trectionadult |
| 1108 | BK Skin trectionpeadiatrics |
| 1109 | Shoulder Immobilizer |
| 1110 | Thumb Spica splint |
| 1111 | Wrist Brace |
| 1112 | L S belt |
| 1113 | Ankle Binder |
| 1114 | Clavical Brace adult |
| 1115 | Clavical Brace Pediatric |
| 1116 | Mallet finger splint |
| 1117 | Finger coat all size |
| 1118 | Dynamic Cock-up splint |
| 1119 | Hard cervical collar |
| 1120 | Soft cervical Collar |
| 1121 | Tennis Elbow splint |
| 1122 | Foot drop splint |
| 1123 | SOMI Brace |
| 1124 | Air mattress |
| 1125 | TLSO Brace |
| 1126 | Gardener wells cervical traction |
| 1127 | Crutch field Cervical tong |
| 1128 | sponge traction |
| 1129 | Long knee brace |
| 1130 | SOMI brace |
| 1131 | Skeleton Traction Set |
| 1132 | Traction Pully |
| 1133 | SPINE INSTRUMENT SET |
| 1134 | Posterior Lumbar set – Technical Specifications |
| 1135 | TLIF CAGE INTRODUCER ( T-L 314MM,W-L-180MM,M4 STD Thread -Slap Hammer Optn Available ) |
| 1136 | TLIF CAGE TRAIL 7 MM( T-L-330MM As per Implant Profile With a Working Length of 200MM,Slap Hammer optn Available ) |
| 1137 | TLIF CAGE TRAIL 8 MM( T-L-330MM As per Implant Profile With a Working Length of 200MM,Slap Hammer optn Available ) |
| 1138 | TLIF CAGE TRAIL 9 MM( T-L-330MM As per Implant Profile With a Working Length of 200MM,Slap Hammer optn Available ) |
| 1139 | TLIF CAGE TRAIL 10 MM( T-L-330MM As per Implant Profile With a Working Length of 200MM,Slap Hammer optn Available ) |
| 1140 | TLIF CAGE TRAIL 11 MM( T-L-330MM As per Implant Profile With a Working Length of 200MM,Slap Hammer optn Available ) |
| 1141 | TLIF CAGE TRAIL 12 MM( T-L-330MM As per Implant Profile With a Working Length of 200MM, Slap Hammer optn Available ) |
| 1142 | TLIF CAGE TRAIL 13 MM( T-L-330MM As per Implant Profile With a Working Length of 200MM, Slap Hammer optn Available ) |
| 1143 | TLIF CAGE TRAIL 14 MM( T-L-330MM As per Implant Profile With a Working Length of 200MM, Slap Hammer optn Available ) |
| 1144 | TLIF CAGE IMPACTOR ST( T-L 340MM, Straight W-L-205MM ) |
| 1145 | TLIF CAGE IMPACTOR CURVED( T-L 340MM,130Deg Curved W-L-205MM ) |
| 1146 | BONE GRAFT FUNNEL & PUNCH( T-L 335MM W-L-220MM,Conical Profile for Graffting with Punch Dia 6mm ) |
| 1147 | BONE GRAFT FILLING PUNCH( T-L 150MM Tip Dia 3.80 &4.80mm ) |
| 1148 | BONE GRAFT FILLING BLOCK( T-L 75MM Width 43mm Thickness 7.5mm,Can Hold Both Tilf&Plif Implants ) |
| 1149 | SLAP HAMMER( Available For Trails & Implants Holders ) |
| 1150 | ANGLED CUP CURRETEE( T-L 340MM,W-L- 200MM,Cup Size -8.40 X 11.00MM-Left ) |
| 1151 | ANGLED CUP CURRETEE( T-L 340MM,W-L- 200MM,Cup Size -8.40 X 11.00MM-Right ) |
| 1152 | SERRATED CUP CURRETTE( T-L 340MM,W-L- 200MM,Cup Size -8.40 X 11.00MM-St ) |
| 1153 | UP-WARD CUP CURRETEE( T-L 340MM,W-L- 200MM,Cup Size -8.40 X 11.00MM-St ) |
| 1154 | DOWN-WARD CUP CURRETEE( T-L 340MM,W-L- 200MM,Cup Size -8.40 X 11.00MM-Downward ) |
| 1155 | RECTANGLE CURRETTE OVAL SHAPED( T-L 340MM,W-L- 200MM,Cup Size -8 X 13.50.MM ) |
| 1156 | RECTANGLE CURRETTE( T-L 340MM, W-L- 200MM,Cup Size -8 X 13.50.MM ) |
| 1157 | OSTEOTOME ANGLED( T-L 355MM, W-L- 218MM,Angled,Width Tip ,Width 7.90mm,26mm Tip Length ) |
| 1158 | OSTEOTOME STRAIGHT( T-L 355MM, W-L- 218MM,Sytraight Width Tip ,Width 8.00mm,26mm Tip Length ) |
| 1159 | PLIF CAGE INTRODUCER( Fixed T-Handle,T-L 260MM) |
| 1160 | PLIF TRAILS 7 MM( T-L-200MM,QC Type) |
| 1161 | PLIF TRAILS 8 MM( T-L-200MM,QC Type) |
| 1162 | PLIF TRAILS 9 MM( T-L-200MM,QC Type) |
| 1163 | PLIF TRAILS 10 MM( T-L-200MM,QC Type) |
| 1164 | PLIF TRAILS 11 MM( T-L-200MM,QC Type) |
| 1165 | PLIF TRAILS 12 MM( T-L-200MM,QC Type) |
| 1166 | PLIF CAGE RASP(T-L-315MM,W-L-200MM) |
| 1167 | PLIF SHAWER 7 MM( T-L-200MM,QC Type,Oval Shape ) |
| 1168 | PLIF SHAWER 8 MM( T-L-200MM,QC Type,Oval Shape ) |
| 1169 | PLIF SHAWER 9 MM( T-L-200MM,QC Type,Oval Shape ) |
| 1170 | PLIF SHAWER 10 MM( T-L-200MM,QC Type,Oval Shape ) |
| 1171 | PLIF SHAWER 11MM( T-L-200MM,QC Type,Oval Shape ) |
| 1172 | PLIF SHAWER 12MM( T-L-200MM,QC Type,Oval Shape ) |
| 1173 | PLIF SHAWER 13MM( T-L-200MM,QC Type,Oval Shape ) |
| 1174 | PLIF SHAWER 14MM( T-L-200MM,QC Type,Oval Shape ) |
| 1175 | PLIF SHAWER 15MM( T-L-200MM,QC Type,Oval Shape ) |
| 1176 | QUICK COUPLING HANDLE(T-L 160MM ,Handle Length 110mm,Steel Top) |
| 1177 | INSTRUMENT BOX (should Have Anti-Glare option for better visualization for inst. All Instruments should have PVD Coating. |
| 1178 | PEDICLE SCREW INSERTION SET (PEDICAL SCREW INSERTION SET TECHNICAL SPECIFICATIONS) |
| 1179 | PEDICLE MARKER WITH SPHERICAL BULGES(Total Length-110mm-W-L-50MM, Dia 1.7mm) |
| 1180 | PEDICLE MARKER WITH LONG BULGES(Total Length-110mm-W-L-50MM, Dia 1.7mm) |
| 1181 | GEAR SHIFT CURVED(Total Length-240mm-W-L-180MM, Dia Working Tip Length) |
| 1182 | GEAR SHIFT STRAIGHT(Total Length-240mm-W-L-180MM, Dia Working Tip Length) |
| 1183 | MONOLOCK AWL WITH STOPPER(Total Length-300mm-W-L-180MM, Dia 14mm Tip Sharp) |
| 1184 | SOUNDING PROBE(Total Length-240mm-W-L-150MM, Rejid Type 2.5mm dia ball tip) |
| 1185 | SOUNDING PROBE-FLEXIBLE(Total Length-240mm-W-L-150MM, Flexible Type 2.0mm dia ball tip) |
| 1186 | ROD PUSHER(Total Length-370mm-W-L-240MM, tip dia 5.5mm rod pusher) |
| 1187 | SIMPLE ROD HOLDER(Total Length-210mm-W-L-170MM, small curved serration hole 5.5mm rod holding ) |
| 1188 | PEDICLE PROBE CURVED(Total Length-240mm-W-L-180MM, Tip flat type small curved) |
| 1189 | PEDICLE PROBE STRAIGHT(Total Length-240mm-W-L-180MM, Tip flat type straight) |
| 1190 | ROD TEMPLATE(Total Length-300mm-dia 5.0mm flexible type) |
| 1191 | CROSS LINK SCREW DRIVER(Total Length-210mm-dia W-L 115MM, Hex tip 2.5mm size) |
| 1192 | CROSS LINK TIGHTNER (T-HANDLE TYPE)(T-L 150MM, Fixed T-Handle Type UsedfortighteningCrosslinkCenterscrew) |
| 1193 | FINAL TIGHTER (3.5MM)FOR ILLIAC(Total Length-280mm-QC Type,Hex Tip,3.5mm Size) |
| 1194 | LOCKING SCREW INSERTER(Total Length-395mm-W-L-260MM, Fixed Straight Handle,SatrTip,Slotted Type) |
| 1195 | LOCKING SCREW FINAL TIGHTNER(Total Length-285mm-W-L-QC Type,Star Tip) |
| 1196 | ANTI TORQUE DEVICE(L-Type,W-L 150MM,Dia 5.5mm Rod Pushing) |
| 1197 | BONE TAP 4.5MM(Total Length-210mm-4.2mm Thread Dia,Thread Length-20mm) |
| 1198 | BONE TAP 5.5MM(Total Length-210mm-5.2mm Thread Dia,Thread Length-20mm) |
| 1199 | BONE TAP 6.5MM(Total Length-210mm-6.2mm Thread Dia,Thread Length-20mm) |
| 1200 | BONE TAP 7.0MM(Total Length-210mm-6.7mm Thread Dia,Thread Length-20mm) |
| 1201 | POLY SCREW INTRODUCER(Total Length-310mm-6.7W-L-190MM (Should be compatible with various screw rulip design)) |
| 1202 | ROD FORK(Total Length-290mm, W-L-170MM, Small Bend Type,Tip Width 20mm) |
| 1203 | PERSUADER(Fixed T Handle Type Total Length -240mm) |
| 1204 | ROD BENDER(T-L 340MM) |
| 1205 | PARELLEL SPREADER(T-L 330MM,Tip Small,Bend Spring with Rachett Locking) |
| 1206 | PARELLEL COMPRESSOR(T-L 330MM,Tip Small,Bend Spring with Rachett Locking) |
| 1207 | VICE GRIP(T-L 220MM,Serration Tip) |
| 1208 | TORQUE WRENCH T HANDLE (Handle T-Type,T-Type,T-L 140MM,11MM Torque) |
| 1209 | RATCHET HANDLE (QC)(T-L-160MM,Q.C Type,Multiple Function) |
| 1210 | QUICK COUPLING LONG(T-L 160MM ,Handle Length 110mm) |
| 1211 | INSTRUMENT BOX |
| 1212 | MONO SCREW INTRODUCES (should Have Anti-Glare option for better visualization for instruments.,All Instruments Should have PVD Coating. |
| 1213 | ANTERIOS CERVICAL PLATES SYSTEM + MULTI LEVEL CERVICAL RETRECTOR SYSTEM |
| 1214 | PLATE HOLDER( WORKING LENGTH -139 , DIA - 8) |
| 1215 | SINGLE BARREL DRILL GUIDE( GUIDE LENGTH - 32 , DIA - 2.8) |
| 1216 | ENTRY AWL PUNCH( WORKING LENGTH - 140 , TIP DIA - 2.5) |
| 1217 | DRILL BIT 2.5 WITH HANDLE( DIA - 4) |
| 1218 | SELF HOLDING SCREW DRIVER (Working Length -154,Outer Sleeve -8.4,Inner Rod-3,Star OD-3.35,STAR LENGTH-2.8) |
| 1219 | SCREW REMOVAL TOOL( WORKING LENGTH - 159.24 TIP LENGTH - 1.80) |
| 1220 | VERTEBRAL BODY DISTRACTOR( MAX.OPENING - 75, RACK LENGTH - 110, PIN HOLDER LENGTH - 50) |
| 1221 | PIN FOR VERTEBRAL BODY DISTRACTOR( TIP LENGTH -10 ,12, THREAD OD - 3.5,HEX 3.5) |
| 1222 | VERTEBRAL BODY PIN INTRODUCER( WORKING LENGTH - 145, DIA - 6.5 , HEX 3.6) |
| 1223 | CALIPER( TOTAL LENGTH - 240 , THICKNESS - 6) |
| 1224 | PLATE BENDER( LENGTH - 260 , WIDTH - 102 , THICK - 10) |
| 1225 | ALLEN KEY( DIA - 3 , HEX - 2.5 , HEX LENGTH - 3) |
| 1226 | TEMPORARY SPIKE( TIP LENGTH - 10 , 12 , THREAD OD - 1.8 ,HEX 3.5) |
| 1227 | MULTILEVEL RETRACTOR SET |
| 1228 | LONGITUDINAL SELF RETAINING RETRACTOR(WOKING LENGTH 52MM ,TOTAL LENGTH 100MM) |
| 1229 | TRANSVERSE SELF RETAINING RETRACTOR(WOKING LENGTH 101MM, TOTAL LENGTH 146MM) |
| 1230 | RETRACTOR BLADE HANDLE(WOKING LENGTH 135 MM, TOTAL LENGTH 239 MM) |
| 1231 | BLADES 40 MM(WOKING LENGTH 40MM) |
| 1232 | BLADES 50 MM(WOKING LENGTH 50MM) |
| 1233 | BLADES 60 MM(WOKING LENGTH 60MM) |
| 1234 | BLADES 70 MM(WOKING LENGTH 70MM) |
| 1235 | BOX(HIGHT 8CM ,WIDTH 22 CM ) |
| 1236 | · System should have a set of Blunt Blades which are fully radiolucent allowing easy visualization through fluoroscopy. |
| 1237 | ·Ball-Snap-Type Connector and twist and clamp release connector. |
| 1238 | · Should Have Anti-Glare and PVD coating on all instruments |
| 1239 | PSO/VCR SET/ PSO VCR / THE OSTEOTOMY INSTRUMENT SET |
| 1240 | Adjustable Vertebral Body Retractor 15mm( three different width spoon tips: 15, 20, and 30mm ) |
| 1241 | Adjustable Vertebral Body Retractor 25mm( three different width spoon tips: 15, 20, and 30mm ) |
| 1242 | Angular Templates Angles 25 Deg(total length 245 mm ) |
| 1243 | Angular Templates Angles 30 Deg(total length 245 mm ) |
| 1244 | Angular Templates Angles 35 Deg(total length 245 mm ) |
| 1245 | Bayonet Nerve Root Retractors 10mm( working length 120,total length 230 ) |
| 1246 | Bayonet Nerve Root Retractors 12mm( working length 120,total length 230 ) |
| 1247 | Bayonet Nerve Root Retractors 14mm( working length 120, total length 230 ) |
| 1248 | Vertebral Body Resection |
| 1249 | L-Shaped Vertebral Body Osteotomes 6mm 10Deg( 6 x 8 mm, working length 160 mm, total length 320 mm ) |
| 1250 | L-Shaped Vertebral Body Osteotomes 8mm 10Deg( 8 x 6 mm ,working length 160 mm, total length 320 mm ) |
| 1251 | Straight Osteotomes 6mm( working length 160 mm, total length 320 mm ) |
| 1252 | Straight Osteotomes 10mm( working length 160 mm, total length 320 mm |
| 1253 | Straight Osteotomes 13mm( working length 160 mm, total length 320 mm ) |
| 1254 | Straight Osteotomes 25mm( working length 160 mm, total length 320 mm ) |
| 1255 | Cancellous Bone Removal |
| 1256 | Triangle Shavers Angles 25 Deg( working length 150 mm, total length 285 mm ) |
| 1257 | Triangle Shavers Angles 30 Deg( working length 150 mm, total length 285 mm ) |
| 1258 | Triangle Shavers Angles 35 Deg( working length 150 mm, total length 285 mm ) |
| 1259 | Curettes Straight 1mm( 3.7 mm / 6.1 mm cup size, working length 160 mm, total length 320 mm ) |
| 1260 | Curettes Straight 3mm( 5.6 mm / 9.2 mm working length 160 mm, total length 320 mm ) |
| 1261 | Curettes Down 45 Deg 1mm( 3.7 mm / 6.1 mm cup size, working length 160 mm, total length 320 mm ) |
| 1262 | Curettes Down 45 Deg 3mm( 5.6 mm / 9.2 mm working length 160 mm, total length 320 mm ) |
| 1263 | Fracturing the Posterior Wall |
| 1264 | Posterior Vertebral Body Punches 20mm,20mm Wide( working length 180,total length 340 ) |
| 1265 | Posterior Vertebral Body Punches 25mm,25mm Wide( working length 180,total length 340 ) |
| 1266 | Flat Nerve Root Retractor 12mm( working length 120,total length 230 ) |
| 1267 | Vertebral Body Rasp Small( working length 130,total length 260 ) |
| 1268 | Vertebral Body Rasp Large( working length 130,total length 260 ) |
| 1269 | · All instrument should have Anti-Glare option and pvd coating for better visualization for instruments. |
| 1270 | ODONTOID INSTRUMENTS SET LIST |
| 1271 | ENTRYHOLEPUNCH(Totallength-370mm, Tip dia-2mm,Thandlelength-80mm) |
| 1272 | GUIDEWIRE(1.2x650 MM)(Totallength-650mm, Dia-1.20mm) |
| 1273 | T-HANDLEGUIDEWIREINTRODUCER(1.2M(Totallength-414mm, Dia-1.20mm,Thandlelength-40mm) |
| 1274 | DEPTHGUAGE(Totallength-265mm, Shaftdia-6mm,upto-) |
| 1275 | DRILL/TAP /SCREWSLEEVE(Totallength-242mm, Shaftdia-8mm, ID-6.20mm) |
| 1276 | TISSUEPROTECTOR(Totallength-200mm, Shaftdia-10mm,ID-8.50mm) |
| 1277 | GUIDEWIRESLEEVE(Totallength-256mm, Shaftdia-6mm, ID-1.80mm,Tip dia-2.60mm) |
| 1278 | ODONTOIDGUIDEWIRECONTAINER(Totallength-670mm, Shaftdia-10mm,ID-8.00mm) |
| 1279 | TAPWITHHANDLE(CORTICAL)(Workinglength-290mm,Shaftdia-6mm,Taplenght-50mm,Cannulation-1.50mm) |
| 1280 | DRILLWITHHANDLE(Workinglength-290mm,Shaftdia-6mm,Drilllenght-60mm,Cannulation-1.50mm) |
| 1281 | LOCKINGSCREWDRIVERLONG(2.5 MM)(Workinglength-320mm,Shaftdia-6mm,Cannulation-1.50mm,Hex-2.50mm) |
| 1282 | LOCKINGSCREWDRIVERSHORT(2.5MM)(Workinglength-235mm,Shaftdia-6mm,Cannulation-1.50mm,Hex-2.50mm) |
| 1283 | TAP WITHSTOPPER(3.5MM,CORTICAL)(Workinglength-240mm,Shaftdia-6mm,Taplenght-50mm,Cannulation-1.50mm) |
| 1284 | DRILLWITHSTOPPER(3 MM)(Workinglength-240mm,Shaftdia-6mm,Drilllenght-60mm,Cannulation-1.50mm) |
| 1285 | PERCUTNEOUS PEDICLE SCREW SYSTEM SET |
| 1286 | GuideWire1.5MM(Sharp& Blunt) (Nitinol guidewire 1.5mm od x 600mm long. Blunt & sharp tip available) |
| 1287 | GuideWireHolder(totallength230mmTo250mmwithsiliconehandle) |
| 1288 | GuideWireContainer(630mmlengthtubewithperferation) |
| 1289 | GuideWireMeasuringDevice(250mmto260mmlengthwithscrewsizemarking) |
| 1290 | ScrewTabAligner(330mmto340mmtotallengthwithsiliconehandle) |
| 1291 | TabRemover(Angletip,240mmto260mmlengthwithsiliconehandle) |
| 1292 | De-TorqueDevice(220MMto230OVERALLENGTHWITHSILICONEhandle) |
| 1293 | Poly Screw Introducer (Screw introducer overal length is 225mm to 240mm. Outer sleeve provide for handle support) |
| 1294 | CompressionDistractionscrewdriverT30(common instrument for distraction and compression.Total length is 300mm to 320mm) |
| 1295 | RodDriver(Rigidrodholderwithsiliconhandle.Easy toinsert&simpletouse) |
| 1296 | LockingScrewInserter(totallength300mmTo320mmwithsiliconehandle) |
| 1297 | LockingscrewFinalTightnerT30(totallength300mmTo320mmwithwithstartypetip) |
| 1298 | RodFeeler(totallength140mmto150mm) |
| 1299 | RodLengthCaliper(Simplemechanismformeasuringrodlength.250mmto270mmlong) |
| 1300 | DilatorSets(6,10,14,18&22)(5SERIAL DIALATORS WITH FOLLOWING SIZE 6mm id. 10mm id, 14mm id, 18mm id & 22mm id) |
| 1301 | Rod Bender (multiple radiuos bending facility & silicone handle. 270mm to 300mm overal length) |
| 1302 | Bone Tap 5.50mm (225mm to 235mm length with 1.7mm cannulation. It can be use with ratchet handle or qc handle) |
| 1303 | Bone Tap 6.50mm (226mm to 235mm length with 1.7mm cannulation. It can be use with ratchet handle or qc handle) |
| 1304 | Jamshidi Needle (Aluminium handle needle with 3.2mmdia x 150mm to 165mm working length) |
| 1305 | Ratchet Handle (Long silicon handle type ratchet handle with QC socket) |
| 1306 | TorqueLimitT-Handle 11Nm (Ttype fixed torque limit handle with QCsocket. 10.5Nm to 11.00Nm torque) |
| 1307 | C12C2 SPACER |
| 1308 | Trial 4.0(overall length 215mm to 250mm with fixed silicon handle 4mm thickness) |
| 1309 | Trial 4.5(overall length 215mm to 250mm with fixed silicon handle 4.5mm thickness) |
| 1310 | Trial 5.0(overall length 215mm to 250mm with fixed silicon handle 5mm thickness) |
| 1311 | Trial 5.5(overall length 215mm to 250mm with fixed silicon handle 5.5 mm thickness) |
| 1312 | Trial 6.0(overall length 215mm to 250mm with fixed silicon handle 6mm thickness) |
| 1313 | Introducer M3(overall length 250mm to 280mm with fixed silicon handle, M3 thread on tip) |
| 1314 | INSTRUMENT BOX (Box made out of Aluminium 300mm to 400mm length X 150mm to 230mm width) |
| 1315 | Posterior Occipito-cervical fixation system |
| 1316 | Sounding Probe Straight (overall length 220mm to 240mm with 2.0mm ball tip) |
| 1317 | sounding Probe Curved (overall length 220mm to 240mm with 2.0mm ball tip) |
| 1318 | Pedicle Probe Straight (overall length 220mm to 240mm with round type silicon handle |
| 1319 | Pedicle Probe Curved (overall length 220mm to 240mm with round type silicon handle |
| 1320 | Awl with stopper (overall length 250mm to 270mm with long type silicon handle) |
| 1321 | Bone Tap 3.5mm (overall length 250mm to 265mm. AO type QC end.) |
| 1322 | Cross link screw driver (overall length 200mm to 220mm with silicon handle) |
| 1323 | Drill with stopper 2.7mm (2.7mm drill with silicon handle overall length 270mm to 290mm) |
| 1324 | Adjustable Drill Sleeve (Drilling Depth can be adjust from 6mm to 32mm as per screw length suitable to use with 2.7mm drill) |
| 1325 | Polyaxial screw introucer (Overall length 260mm to 275mm with silicon hanle & zero wobling model) |
| 1326 | Occipital Plate Holder (Foceps model simple plate holder. Overall length 250mm to 265mm) |
| 1327 | Occipital Plate bender (overall length 255mm to 270mm/double joint type) |
| 1328 | Rod holder (Simple Rod holder. Forceps model for 3.7mm Rod) |
| 1329 | Rod Pusher (overall length 245mm to 260mm with silicon handle, suitable to 3.7mm rod) |
| 1330 | Rod bender (Easy to bend 3.5mm to 4.0mm dia Rods. Overall length 220mm to 240mm) |
| 1331 | Tubular Rod Bender (Suitable for 3.5mm to 3.75mm dia Rods. Overall length 200mm to 230mm) |
| 1332 | Ro Fork (overall length 230mm to 245mm ith silicon handle) |
| 1333 | Ratchet T Handle (silicon handle type AO QC handle) |
| 1334 | De-Torque device (overall length 110mm to 130mm. Silicon hanle with angled direction) |
| 1335 | Parallel spreader (6mm to 22mm distraction. Parallel type, overall length 205mm to 220mm) |
| 1336 | Parallel compressor (40mm to 18mm compression, Parallel type, overall length 210mm to 230mm) |
| 1337 | Rod Persuader (up to 12mm reuction. Guntype model with simple mechanism) |
| 1338 | 3.5mm self holding screw driver (overall length 280mm to 310mm with silicon handle) |
| 1339 | Locking screw inserter (overall length 290mm to 310mm with flat silicon handle) |
| 1340 | Final Tightner (overall length 290mm to 310mm with flat type silicon handle, 3.5mm x 3.5mm hex tip) |
| 1341 | Cross link Hex Nut Tightner (T Type instrument with hex socket. Overall length is 100mm to 120mm) |
| 1342 | Implants Box with tray ( made out of aluminium, silicon bushes an strips arrange right manner to keep implants. Box size: 330mm x 270mm) |
| 1343 | Instruments box with trays (made out of aluminium. Silicon bushes and strips arrange right manner box size: 420mm x 220mm) |
| 1344 | OLIF INSTRUMENTS SET |
| 1345 | Suction Tube (Outer Dia : 4mm ,Inner Dia 3mm, Hose Connector Dia : 9.7mm, Handle Length : 56mm ,Handle Dia : 12.7,Overall Length : 297mm) |
| 1346 | Straight Multi Tool (Overall Length : 382mm ,Working Length : 260mm,Bayonet Height : 38mm , Shaft Dia : 6.3mm,Cutting edge- Width:10mm & Length : 15mm,One side pyramid serrated shape ,Steel topped silicone handle) |
| 1347 | Angled Multi Tool (Overall Length : 382mm ,Working Length : 260mm,Bayonet Height : 38mm , Shaft Dia : 6.3mm,Cutting edge- Width:10mm & Length : 15mm,One side pyramid serrated shape,16.1° Angled,Steel topped silicone handle) |
| 1348 | Reverse Angled Multi (Overall Length : 382mm ,Working Length : 260mm,Bayonet Height : 38mm , Shaft Dia : 6.3mm,Cutting edge- Width:10mm & Length : 15mm,One side pyramid serrated shape,16.1° Reverse Angled,Steel topped silicone handle) |
| 1349 | Straight Serrated Cup Curette (Overall Length : 382mm ,Working Length : 260mm,Bayonet Height : 38mm , Shaft Dia : 6.3mm,Cup Size -Width :6.5mm & Length : 8.4mm,Depth : 2.95mm ,serrated cup shape,Steel topped silicone handle) |
| 1350 | Angle serrated Cup Curette (Overall Length : 382mm ,Working Length : 260mm,Bayonet Height : 38mm , Shaft Dia : 6.3mm,Cup Size -Width :6.5mm & Length : 8.4mm,Depth : 2.95mm ,serrated cup shape,16.1° Angled,Steel topped silicone handle) |
| 1351 | Reverse angle serrated Cup Curette (Overall Length : 382mm ,Working Length : 260mm,Bayonet Height : 38mm , Shaft Dia : 6.3mm,Cup Size -Width :6.5mm & Length : 8.4mm,Depth : 2.95mm ,serrated cup shape,16.1°Reverse Angled,Steel topped silicone handle) |
| 1352 | Cobb Elevetator - 10mm (Overall Length : 382mm ,Working Length : 260mm,Bayonet Height : 38mm , Shaft Dia : 6.3mm,Cobb-Width : 10mm & Length : 68.8mm,Thickness : 2.0mm,Steel topped silicone handle) |
| 1353 | Cobb Elevetator - 18mm (Overall Length : 382mm ,Working Length : 260mm,Bayonet Height : 38mm , Shaft Dia : 6.3mm,Cobb-Width : 18mm & Length : 68.8mm,Thickness : 2.0mm,Steel topped silicone handle) |
| 1354 | Ring Curette (Overall Length : 382mm ,Working Length : 260mm,Shaft Dia : 6.3mm,Ring-Inner Dia : 5mm & Outer Dia : 8.5mm,Thickness : 5.2mm,Steel topped silicone handle) |
| 1355 | Ostetome (Overall Length : 389mm ,Working Length : 260mm,Shaft Dia : 6.3mm,Ostetome Head -Width :8mm & Length : 18mm, Thickness-0.8mm,Steel topped silicone handle with slapping provision) |
| 1356 | End Plate Preparator Rasp-Flat (Overall Length : 389mm ,Working Length : 260mm,Bayonet Height : 38mm , Shaft Dia : 6.3mm,Rasp-Width :10mm & Length : 18.45mm,Thickness : 5mm,One side pyramid serrated shape,Steel topped silicone handle with slapping provision) |
| 1357 | End Plate Preparator Rasp-Curved (Overall Length : 389mm ,Working Length : 260mm,Bayonet Height : 38mm , Shaft Dia : 6.3mm,Rasp-Width :18mm & Length : 22mm,Thickness : 5mm,One side pyramid serrated shape,Curved shapes,Steel topped silicone handle with slapping provision) |
| 1358 | TLL Cage Inserter (Working Length : 245mm,Shaft Dia : 6.0mm , Lock Nut Dia : 17mm,Cage Holder Part -Width : 6mm & Depth : 6mm,Thickness :1.8mm,Steel topped silicone handle with slapping provision) |
| 1359 | TLL Guided Cage inserter (Overall Length : 264mm ,Working Length : 204mm,Sleeve Dia : 6.5mm,Cage Holder Part -Width : 6.6mm & Depth : 6mm,Thickness :1.8mm,Steel topped silicone handle with slapping provision) |
| 1360 | TLL Cage Extractor (Overall Length : 228mm ,Working Length : 175mm,Sleeve Dia : 9.5mm,Cage Holder Part -Width :16mm & Depth : 13mm,Thickness :2mm ,Trigger Length : 8.4mm,Steel topped silicone handle with slapping provision) |
| 1361 | Slap Hammer (Overall Length : 183mm,Hammer Block - Length :60mm ,Dia :37mm,Stopper Bush - Dia : 15mm,Lemgth : 15mm,Slider Shaft - Dia : 6.4mm , Length - 138mm,Slap Holder Dia : 16mm, Slot Gap :4mm,Full stainless steel body) |
| 1362 | Slap Hammer For TLL cage extractor (Overall Length : 268mm,Hammer Block - Length :85mm ,Dia :35mm,Stopper Bush - Dia 26.5mm,Lemgth : 25mm,Slider Shaft - Dia : 9.5mm , Length - 205mm,Slap Holder Dia : 22mm, Slot Gap :4mm,Slot Depth : 17.5mm , Slot Width : 12.5mm ,,Full stainless steel body ,Special type ball locking mechanism.) |
| 1363 | Small Trephine (Overall Length : 365mm , Shaft Dia : 11mm,Cannulation : 3mm , Trephine Dia : 6mm,Length : 32mm , Handle Length : 102mm,Handle Dia : 11mm , Radial buttress cutting edge) |
| 1364 | Shavers (Overall Length : 248mm ,Working Length : 166mm,Shaver - Length : 45mm,Width : 9mm,10mm,11mm,12mm,13mm,14mm & 15mm,Thickness : 3mm , Shaft Dia : 6mm,Quick Coupling Model.) |
| 1365 | Quick Coupling T-Hanle (Silicone molded steel handle wih excellent coupling,Shaft Dia : 11mm , Couping with Square 6.3,Silicone Handle : Length : 120mm ,Height : 95.5mm,Thickness : 24.5mm) |
| 1366 | 6/8 Distractor (Overall Length : 253mm ,Working Length : 180mm,Shaft Dia : 6mm ,Distractor Length : 36.4mm,Width : 8mm,Thickness : 6mm,Quick Coupling Model.) |
| 1367 | Wide Nerve Root Retractor (Overall Length : 195.2mm ,Working Length : 168mm,Shaft Dia : 4mm ,Handle Length : 110mm,Blade Width : 7mm,Length 15.62mm,Thickness : 1.3mm,Tip Angle Depth : 4mm) |
| 1368 | Bayoneted Penfield Dissector (Double End) (Overall Length : 338mm,Shaft Dia : 4.6mm ,Tip Dia : 1mm,Bayonet Height : 21mm,Tip Angle : 163° , Knurling for better grip for holding) |
| 1369 | Implant Trails Parallel(0°)(Overall Length : 332mm , Working Length : 218mm,Shaft Dia : 6mm ,Lateral Length 45mm,50mm & 55mm,9mm to 15mm thickness with A/P width : 20mm ,Silicone handle - Length :90mm,Dia : 16mm) |
| 1370 | Implant Trails Lordotic 6°(Overall Length : 332mm , Working Length : 218mm,Shaft Dia : 6mm ,Lateral Length 45mm,50mm & 55mm,9mm to 15mm thickness with 1mm diff.A/P width : 20mm @ 6° ,Silicone handle - Length :90mm, dia 16mm) |
| 1371 | End Plate Protector (Overall Length : 290mm , Working Length : 140mm,Blade Width : 18mm , Length : 80mm ,Thickness : 0.8mm,Slap hammer provision provided.) |
| 1372 | Guide Wire(Length : 450mm ,Dia : 1.6mm,Trocar Tip) |
| 1373 | Guide Wire(Length : 450mm ,Dia : 1.6mm,Blunt Tip) |
| 1374 | Dilators Set of four:5.3mm dialator(Length : 277mm , Outer Dia :5.3mm,Inner Dia : 1.7mm) |
| 1375 | Dilators Set of four:10.6mm dialator(Length : 212mm , Outer Dia :10.6mm,Inner Dia : 5.4mm) |
| 1376 | Dilators Set of four:15.8mm dialator(Length : 196mm , Outer Dia :10.8mm,Inner Dia : 15.8mm) |
| 1377 | 20.8mm Grooved ialator (Length : 180mm , Outer Dia :20.8mm,Inner Dia : 16mm) |
| 1378 | Main Retractor Blades (lefty & Right) (Blade Length :90mm , Outer Dia : 23.4mm,Inner Dia : 21mm,,Collar Inner Dia : 21mm ,Length : 17mm) |
| 1379 | Main Retractor Blades (lefty & Right) (Blade Length :100mm , Outer Dia : 23.4mm,Inner Dia : 21mm,,Collar Inner Dia : 21mm ,Length : 17mm) |
| 1380 | Main Retractor Blades (lefty & Right) (Blade Length :110mm , Outer Dia : 23.4mm,Inner Dia : 21mm,,Collar Inner Dia : 21mm ,Length : 17mm) |
| 1381 | Main Retractor Blades (lefty & Right) (Blade Length :120mm , Outer Dia : 23.4mm,Inner Dia : 21mm,,Collar Inner Dia : 21mm ,Length : 17mm) |
| 1382 | Main Retractor Blades (lefty & Right) (Blade Length :130mm , Outer Dia : 23.4mm,Inner Dia : 21mm,,Collar Inner Dia : 21mm ,Length : 17mm) |
| 1383 | Main Retractor Blades (lefty & Right) (Blade Length :150mm , Outer Dia : 23.4mm,Inner Dia : 21mm,,Collar Inner Dia : 21mm ,Length : 17mm) |
| 1384 | Main Retractor Base (Rack Length : 155mm ,Width : 14.9mm,Thickness : 9.4mm,Moving Part - Length : 41mm ,Width :60mm,Thickness : 12mm,,Blade Holder - Length : 86mm ,Width : 23mm, Height:18mm) |
| 1385 | Anterior Retractor Frame (Length : (160mm x 120mm) ,Width :15mm,Thickness : 8mm) |
| 1386 | Posterior & Anterior Retractor(Length : 90mm & 110mm,Moving Part - Length :35mm ,Width :22mm,Height : 24.5mm |
| 1387 | Anterior/PosteriorRetractor Blades - 90mm (Left & Right)(Blade Length :90mm , Width : 20mm,Thickness : 1.5mm,,Blade holder- Thickness : 5mm ,Width : 8mm) |
| 1388 | Anterior/PosteriorRetractor Blades - 100mm (Left & Right)(Blade Length :100mm , Width : 20mm,Thickness : 1.5mm,,Blade holder- Thickness : 5mm ,Width : 8mm) |
| 1389 | Anterior/PosteriorRetractor Blades - 110mm (Left & Right)(Blade Length :110mm , Width : 20mm,Thickness : 1.5mm,,Blade holder- Thickness : 5mm ,Width : 8mm) |
| 1390 | Anterior/PosteriorRetractor Blades - 150mm (Left & Right)(Blade Length :150mm , Width : 20mm,Thickness : 1.5mm,,Blade holder- Thickness : 5mm ,Width : 8mm) |
| 1391 | Blade Tilter(Overall Length : 177mm , Shaft : 8mm Square,Hylem handle -Length : 111mm) |
| 1392 | Stability Pin - 90mm(Overall Length : 107mm , Working Length : 90mm,Thread Length : 20mm ,Taper Thread : 1.8 pitch , Outer Dia : 2.8mm) |
| 1393 | Stability Pin - 100mm(Overall Length : 117mm , Working Length : 100mm,Thread Length : 20mm ,Taper Thread : 1.8 pitch , Outer Dia : 2.8mm) |
| 1394 | Stability Pin - 110mm(Overall Length : 127mm , Working Length : 110mm,Thread Length : 20mm ,Taper Thread : 1.8 pitch , Outer Dia : 2.8mm) |
| 1395 | Stability Pin - 130mm(Overall Length : 147mm , Working Length : 130mm,Thread Length : 20mm ,Taper Thread : 1.8 pitch , Outer Dia : 2.8mm) |
| 1396 | Stability Pin - 150mm(Overall Length : 157mm , Working Length : 150mm,Thread Length : 20mm ,Taper Thread : 1.8 pitch , Outer Dia : 2.8mm) |
| 1397 | Stability Pin Inserter(Overall Length : 256mm ,Working Length : 150mm,Shaft Dia : 6mm ,Hexagonal soocket size : 4.1Hex , Depth 6.5mm,Silicone handle with steel top) |
| 1398 | Hexagonal T-Handle Wrench(Overall Length : 105mm ,Working Length : 94.5mm,Shaft Dia : 8mm , Handle Length : 70mm & Dia : 10mm,Hex in tip : 6mm & Depth : 5mm) |
| 1399 | Table Arm Attachment(Length : 60mm ,Height : 10.5mm , Width : 14.9,Thickness : 2.5mm,Special type serrated locking mechanisam) |
| 1400 | Rigid Table Arm(Overall Length : 585mm ,,Center tightner - Dia : 35mm & Height : 70mm,Handle Length : 80mm ,Width : 27mm & Height : 47.5,Shaft Dia : 27mm ,M10 X 1.5mm thread) |
| 1401 | Table Rail Clamp(Overall Size : 90mm x 80mm x 50mm,Handle Length : 136mm , Ball Dia : 11mm,Shaft Dia : 11mm) |
| 1402 | Bone Graft Filling Block(Overal Size : 70nn x 42mm x 25mm,Cage filling area : 60mm x 22mm x 12mm) |
| 1403 | Graft Filling Punch(Overall Length : 250mm ,Working Length : 150mm,Nylon Tip Width : 27.5mm , Thickness : 8.5mm,Shaft Dia : 8mm) |
| 1404 | Pituitary Rongeur(Straight - Working Length : 10" , Cup size : 6mm,UP - Working Length : 10" , Cup size : 6mm,40° angled up to 3mm) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
