Tender For Construction Of Animal Husbandry Institute At Nathdwara
Tender Value
5.50 Crore
Estimated cost
Bid Submission
12 Dec 2022
0 days left
EMD
11 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nathdwara → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Animal Husbandry Institute At Nathdwara
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 11-Dec-2022 | agreement term and condtions | Technical Bid | 12-Dec-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in lead of 50 mtr. All kinds of soil. |
| 2 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramnming of bottoms lift up to 1.5 mtr including traking out the excavated soil and depositing and refilling of jhiri with watering and ramming and deposals of surplus excavted soil as directed with a lead in a 50 mtr including stacking of useful material if available.Ordinary rock |
| 3 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramnming of bottoms lift up to 1.5 mtr including traking out the excavated soil and depositing and refilling of jhiri with watering and ramming and deposals of surplus excavted soil as directed with a lead in a 50 mtr including stacking of useful material if available. Hard rock (blasting prohibited) usefulmaterial 30 % |
| 4 | Earth work in excavationover area ( exceeding 30 cm in depth. 1.5 Mtr in width as well as 10 sqm on plan) including disposal of excavated earth lead up to 50 m and lift up to 1.5 Mtr. Disposal earth to be leveled and neatly dressed.All kinds of soil |
| 5 | Random rubble dry Stone Kharanja undre floor |
| 6 | Providing and laying in position cement concrete including curing compaction etc . Completein specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate M10 grade Nominal Mix ( with graded stone aggregate 20mm nominal size) |
| 7 | Providing and laying in position specified grade of reinforcement cement concrete all RCC structural elements upto plinth levelincluding curing compaction finishing with rendering in cement sand mortar 1:3 ( 1 cement : 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement M25 grade Design mix |
| 8 | Centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formworks for foundation in basement rafts, footings, straps beams, bases of columns etc. up to plinth level. |
| 9 | Random rubble stone masonry for foundation and plinth in cement sand mortar above 30 cm thick wall in:Cement mortar 1:6( 1 Cement : 6 Sand ) |
| 10 | Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc. in layers not exceeding 20 cm in depth consolidation each deposited layer by ramming and watering including lead up to 50 mtr and with all lift. |
| 11 | Carriage of following material including loading unloading and stacking if required complete in all respect.Earth, Sand, Lime, Moorum, manure or sludge, Building Rubbish, Stone Metal (Girt and ballast etc), Stone for Masonry work & Soling and Excavated rock etc. for 1 km. |
| 12 | Providing and layiny in position specified grade of cement concrete for RCC Structure elements upto floor three level including curing,compaction ,finishing with rendering in cement sand mortar 1:3 (1 cement ; 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for Walls (any thickness) including attached pilasters buttresses, plinth and string courses fillets columns pillars pears abutments posts struts etc. for M-25 grade Design mix |
| 13 | Providing and layiny in position specified grade of cement concrete for RCC Structure elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement ; 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement Beams, suspended floors, roofs, griders having slopes up to 150 , landings,balconies , shelves ,chajjas, lintels, bands ,plain window, sills ,staircases and spiral staircases M25 grade Design mix |
| 14 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with wooden membersand removal of formwork for upto floor three level for : Columns, pillars posts and struts etc. |
| 15 | Centering & shuttering with ply wood or steel sheets including shuttering , propping, barcing both ways with wooden members and removal of form work up to floor three level for: Walls (any thickness) including attached pilasters, buttresses, plinth and string course. |
| 16 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with wooden membersand removal of formwork for upto floor three level for : Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates,anchorblocks,sills,chhajjas,lintel,beam, plinth beam etc. |
| 17 | Add extra over item no 4.7.1 to 4.7.11 for using steel telescopic prop instead of wooden member |
| 18 | Providing and fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position in binding (including cost of binding wire ) all complete up to floor three level Thermo mechanically treated bars (conforming to relevant IS code.) |
| 19 | ANTI TERMITE TREATMENT Providing and injection chlopyrifous Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits wall trenches basement excavation top surface of plinth filling junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which approach is to be laid surrounding of pipes and conduits etc. complete as per specification (plinth floor area only shall be measured for payment) |
| 20 | Brick masonary in Super structure bricks of class designation 75 in Cement mortar 1:4 ( 1 cement : 4 coarse sand ) for three storey from plinth level and include cost of water, scaffolding, centering and shuttering, curing and raking of joints etc. complete in all respect. |
| 21 | Add extra for brick work in square or rectangular pillars up to 45cm length and two corners are free |
| 22 | Half brick masonry in Super structure using bricks of designation 75 in Cement mortar 1:4 ( 1 cement : 4 coarse sand )up to third storey including cost of nominal hoopreinforcement ( 2 Nos. 6 mm dia M.S. bar at every forth course ) |
| 23 | Plaster on new surface on wall in cement sand mortar 1:4 including raking of joints etc. complete fine finish: 20mm thick |
| 24 | Plaster on new surface on Cieling in cement sand mortar 1:4 including raking of joints etc. complete fine finish: 12mm thick |
| 25 | Plaster on new surface on Outer walls in cement sand mortar 1:4 including racking of joint etc. complete fine finish : 25mm thick. |
| 26 | Polished Blue Kota stone flooring skirting laid over 20mm thick base of CM 1:4 and jointed with gray cement slurry tomatch the shade of the slab including rubbing and polishing complete 20mm thick For area of each slab From 2001Sq.cm to 5000 sq.cm 30 mm thick slab |
| 27 | Polished Blue Kota stone slab in steps, walls, pillars, having fine machine cut edges laid on 12mm (Av.) thick cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete 30mm thick slab area 2001 to 5000 sq.cm |
| 28 | Providing and fixing Ist quality standard White/ ivory,grey, fuma red brown, light green, light blue and other light shades Glazed Tiles (confirming to IS : 13753 & IS 13622) of size 300 mm x 200 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls & pillars ). |
| 29 | Add extra for using tiles of size 300 x 450 mm over item no. |
| 30 | Providing and fixing Ist quality MAT finished ceremic tiles size 300 x 300 mm confirming to IS: 13755 & IS: 15622 colour such as white, grey, Ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4). |
| 31 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade,laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. Size 600 mm x 600 mm |
| 32 | Providing & laying chequerred plain cement concrete embessed to specially manufactured non-slipping tiles of approved make 20mm thick laid on 20mm thick bed of cement mortar 1:6 jointed with neat cement slurry complete |
| 33 | Applying Birla /JK white cement based putty over cement plaster surface for making even surface |
| 34 | Painting with enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 35 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work including prepration of base with primer putty lippy complete in allrespect. |
| 36 | Finishing walls with textured exterior paint of required shade as per approved colour complete as per manufacturers specificationsincluding primer coat and protecting coat Trowel Finish av. thickness 1500 to 2000 microns. |
| 37 | Painting exterior surface ofWallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty,etc complete in all respect.New Work |
| 38 | Providing and fixing in position collapsible steel shutters with vertical M.S. , Channels 20x10x2mm and bracket with flat iron diagonals 20x5mm, size with top and bottom rail of T-iron 40x40x6mm . with top flat of 50 x 10 mm and bottom flat of 40 x 6 with 40mm dia steel pulleys/ ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer ( To be measured and paid as per outer dimension). With 75 mm opening when closed. |
| 39 | Supplying and fixing rolling shutters of approved make, made of 80x1.25 mm M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially desigened pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including cost of spring hooks, providing and fixing necessary 25.3cm long wire springs grade No. 2 and M.S. top cover 1.25 mm thick for rolling shutters as per design,(clear openable area to be measured for payment). |
| 40 | Providing and fixing ball bearing for rolling hutters |
| 41 | Supplying and fixing dressed sand or other approved stone shelves tands in cement mortar 1:3 with fine dressed edges: 75 mm thick |
| 42 | Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm, long embedded in cement concrete block 15x10x10cm of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with coper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer excluding the cost of metal beading and other fitting except necessary hings of pivots steel handles peg stay etc. as required.Partly fixed and partly openable (fixed area not to exceed 33 %). |
| 43 | Providing and fixing M.S. sheet single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally bracked with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engineer-in-charge but excluding cost of chowkhats: including two coats of anti-corrosive red oxide primer paint.M.S. Sheet 18 S.W.G. |
| 44 | Add extra for double leaf shutters. |
| 45 | Providing and fixing T-iron frames for doors windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs, 10cm long embedded in cement concrete blocks 15x10x10cm of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screw or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 46 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not exceeding 150mm distance. |
| 47 | Providing and fixing square bars or other flat welded to window ventilatiors etc. |
| 48 | Providing and fixing steel gate grating and grills made of angles, tees, square bars orflats black pipe with holdfast and fittings complete as per deign and drawing including cutting welding and fabrication with priming coat of red oxide. |
| 49 | Supply and fixing in cement mortar welded hand railing made out of MS round or square bars, flats etc. for staircase or verandha as per design complete in all respect ( wooden or PVC hand railing to be paid extra) with priming coat of red oxide. |
| 50 | Steel work in built up tubular trusses including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete above plinth level upto 4.5 mtr height. Hot finished welded type tubes. |
| 51 | Providing and fixing fully panelled double leaf shutter for doors as per approved design and drawing with approval ordinary C.P./oxidised steel fittings as per Annexure \"A\" and width of styles & top rails of 100 mm and lock rails width of 150 mm and bottom rails of 200 mm width including teak wood beading of size 19 mm x12 mm on both faces complete. 30 mm thick wood sqmM.P. Teak Wood Gr-I |
| 52 | Supplying & fixing door, window, chowkhats and frames, including antitermite treatment M.S.flat , hold fasts of size 250x40x3 mm fixed with M.S. bolt 5 mm dia 50 mm long duly embedded in cement concrete M-15 grade. M.P. Teak Wood Grade - 1 |
| 53 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finishing with cement mortar 1:3 as per standard design. |
| 54 | Providing Cement based water proofing treatment to RCC Roof with brick bats 25 mm to 100 mm in CM 1:4 (1-Cement : 4-Sand) the under layer being 20mm thick bed plaster of cement sand mortar 1:6 with neat cement punning @ 3 Kg/sqm including cleaning of RCC surface and adding of water proofing compound at all stages at 2% of weight of cement including curing etc. complete in all respect finishing with 20mm thick cement sand mortar of mix 1:4 mixed with water proofing compound. |
| 55 | Providing and laying water proofing treatment in sunken portion of WCs bathroom etc. by applying polymer modified cementous slurry mixed with armor cerete of M/S The structure Water proofing company Pvt. Ltd. or Topecrete of M/s Cico Engineer Service or Hydro Proof of Fasroe consi sting of appearing:First layer of slurry of ement @ 0.448 kg/sqm mixed with Armourcrete or Tapecrete @ 0.253 kg/sqm This layer will be allowed to air cure for 4 hours.Second layer of slurry of cement @ .242 kg/sqm mixed with Armourcrete or Tapecrete@ 0.126 kg/sqm This layer will be be allowed to air cure for 4 hours followed by water curing for 48 hours.The rates includes preparation of surface treatment & sealing of all joints corners, junction with polymer mixed slurry. |
| 56 | Providing corrugated G.I. sheet roofing fixed with G.I. J or L hooks bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coat of approved paint on over lapping of sheet complete (upto a pitch of 60 degree) & excluding the cost of purlins rafters and truses, for class of sheets.0.63mm thick |
| 57 | Stone slab roofing on ground floor with fine grained stone slab from approved quarry including filling of joints of parapet and slab on both sides in cement sand mortar 1:4, ralthal, stone kharanja, lime terracing 90mm average thickness (asper Jaipur Practice) with ceilling pointing in cement sand mortar 1:3 Complete as per specification for span. Upto 2.00 meter |
| 58 | Providing and fixing anodized aluminium work (Anodizing to be got done from approved Anodizer) for doors, windows ventilators and partition with extruded built up standard tubular and other sections of approved make conforming to IS : 733 and IS 1285 anodised transparent and dyed to required shadeaccording to IS : 1868 .(Minimum anodic coating of grade AC 15), fixed with rawl and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gap at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth rust free straight, mitred and jointed mechaincally wherever required including cleat angle Aluminium snap beading for glazing /panelling , C.P. brass/ stainless steel screws, AI. Tower bolt & AI handle & Al. Aldrop etc. all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separtely).For fixed portions |
| 59 | Providing and fixing anodized aluminium work (Anodizing to be got done from approved Anodizer) for doors, windows ventilators and partition with extruded built up standard tubular and other sections of approved make conforming to IS : 733 and IS 1285 anodised transparent and dyed to required shadeaccording to IS : 1868 .(Minimum anodic coating of grade AC 15), fixed with rawl and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gap at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth rust free straight, mitred and jointed mechaincally wherever required including cleat angle Aluminium snap beading for glazing /panelling , C.P. brass/ stainless steel screws, AI. Tower bolt & AI handle & Al. Aldrop etc. all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separtely).For shutters of openable doors, windows & ventilators including providing & fixing hinges / rollers etc. and making provisiion for fixing of fittings wherver required (lockes shallbe paid for separately). |
| 60 | Providing and fixing glazing in aluminium door, window, ventilator shutter and partition etc with PVC/Neoprene gasket etc complete as per the Architectural drawings and the direction of Engineer in charge ( cost of aluminium snap beading shall be paid in basic item) With glass panes of 5.0 mm thickness (weight not less then 13.75 kg/sqm) as per IS:2835 |
| 61 | Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade) particle board grade I type IInd conforming to IS: 12823 bondedformaldehyde synthetic resin of approved grant and manufacture in panlling fixed in aluminium doors windows shutters and partitions frame with C.P. Brass /stenssteel screws etc. complete as per Architectural drawing and direction of Engineer in charge. Pre laminated particle board with decorative lamination on both side |
| 62 | Supplying & Fixing R.C.C. Manholes covers with frame of approved make (Light duty). Size600x600mm (Double seal) |
| 63 | Construction of manhole in all type of soil inner size 90 X 60 Cm. 450 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. Depth upto 0.50M |
| 64 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. -do- size 450 x 450mm depth upto 0.5 M Cement cover with frame |
| 65 | P & F Universal (anglo-Indian) typewhite glazed vitreous china Ist quality W.C. (I.S: 2556 Mark) withP or S trap including cutting and making good the wall and floor. |
| 66 | P & F water closet Seat Covers with brass hinges complete:......do........White |
| 67 | P & F C.P. lugs for toilet seat cover |
| 68 | P&F Ist quality WVC Urinal (IS :2556 mark) with 25 mm dia G.I.waste pipe, dome waste couplings, concealed iron brackets or screw etc. complete Flat back (large) or half stall size 610x400x80mm |
| 69 | P & F Low level Flushing Cistern of 10 litres capacith (IS : 2556 mark), of approve make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS : 1703 mark) complete including cutting and making good the wall: PVC with PVC bend as per IS 7231 |
| 70 | P & F C.P. brass Urinal Flush pipe set complete with flanged brackets of approved makeFor 1 Urinals |
| 71 | P & F WVC wash basin (Ist quality, I.S.: 2556 Mark) of approved make with C.I. brackets duly painted 1 No 15 mm C.P. pillar cock (I.S. : 8934 Mark) & 32 mm C.P. brass wastecoupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall. Size 630 mm x 500 mm dia for counter top |
| 72 | P & F WVC wash basin (Ist quality, I.S.: 2556 Mark) of approved make with C.I. brackets duly painted 1 No 15 mm C.P. pillar cock (I.S. : 8934 Mark) & 32 mm C.P. brass wastecoupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.Size 610 x 510 mm |
| 73 | P &F Kitchen & Lab. Sink of approved make with C.I. bracketsduly painted 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor.1.0 mm thick Salem stainless steek AISI- 304 kitchen sink of approved make (Nirali, Neel Kanth, Jaina, Faber-castelll) with large waste coupling. 24 x 18 x 8 20 x 16 x 8 |
| 74 | P & F Drain Board of approved make with C.I. brackets duly painted complete including cutting and making good the wall:Stainless size 600 x 450 mm |
| 75 | P & F waste coupling with fittings of approved quality / make :C.P. Brass 32 mm dia |
| 76 | P & F waste pipe with all fittingP.V.C. with C.P. nut32 mm |
| 77 | P & F Beveled edge Mirror of special glass of approved make (Atul Modi Guard Saint Gobin orequivalent) complete with 6 mm thick asbestos cement sheet ground fixed to wooden screw & washers.Size 600 x 450 mm x 4 mm thick |
| 78 | P & F Towel Rail or Ring of approved quality/ make: C.P. brass towel rail elbow type with concealed screws size 600mm (Heavy duty) |
| 79 | P & F Grating of approved quality /make Stainless steel sheet size 125 mm dia |
| 80 | P & F Liquid Soap Container with brackets complete of approved makeC.P. brass |
| 81 | P & F jet spray for water closet with C.P. Copper tube flange of approved make |
| 82 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)15 mm nominal outer dia pipes |
| 83 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)25mm nominal outer dia pipes |
| 84 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge.(External work).50 mm nominal outer dia pipes |
| 85 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge.(External work).15 mm nominal outer dia pipes |
| 86 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge.(External work).25 mm nominal outer dia pipes |
| 87 | P & F Pilllar Cocks (IS :8934 Mark) of superior quality and approved make:C.P. Pillar cock, 15 mm dia nominal bore |
| 88 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:(-do-) Long body, 15mm nominal bore weight not less than 690 gm |
| 89 | C. P. Brass swan - neck, 15mm nominal bore. |
| 90 | P & F Stop Cock (IS :8931 Mark), superior quality & of approved make: (-do-) Concealed Stop Cock 15mm |
| 91 | P & F Sink Cocks of superior quality & approved made :C.P. Sink cock swinging spout 15mm. |
| 92 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete :Brass wt.400 gm,15mm. |
| 93 | P & F 15 mm. Dia Connection Pipe of approved quality/make :(-do-) upto length 370mm |
| 94 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :Gun-metal 15mm nominal bore. |
| 95 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :Gun-metal 25mm nominal bore. |
| 96 | P & F PVC Storage Tank (IS : 12701marked indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design:1000 litres capacity. |
| 97 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.110mm dia |
| 98 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.160mm dia |
| 99 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.Coupler (socket)110 mm dia |
| 100 | Reducer 110x75mm 110mm |
| 101 | Plain tee 75mm |
| 102 | Plain tee 110 mm dia |
| 103 | Door tee 75mm |
| 104 | Door tee 110 mm dia |
| 105 | Bend 45 75mm |
| 106 | Bend 45 110mm |
| 107 | Bend 87.575mm |
| 108 | Bend 87.5110mm |
| 109 | Vent covel75mm |
| 110 | Vent covel110 mm dia |
| 111 | Socket plug75mm |
| 112 | Socket plug 110 mm dia |
| 113 | P & F Squatting pan (Indian type) white glazed vitreous china Ist quality W.C. pan (I.S. 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor (excluding the pair of foot rest.)Size 580 mm |
| 114 | Granular Sub-Base with Coarse Graded Material ( Table:- 400- 2) (Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401)for grading- IMaterial |
| 115 | Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver / Motor grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.)As per clause 406. |
| 116 | Construction ofun-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design,laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed, plate vibrators and vaccum process and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawingand Technical Specification Clause 1501 |
| 117 | Supplying and fixing of steel doors, with frame of hollow metal pressed section 105x60 mm as per I.S.I 1.25 thick with double sheet shutter 1.00 mm thick M.S. sheet to spot welded and embossed with rib type design on both sides fronts sides vertical and back side horizontal and spot welded including holds fasts of (15X3 mm), M.S. oxidized fittings such as butt hinges sliding doors bolts, handles, tower bolts etc. complete in all respects as per drawing and specifications including applying priming coat of approved steel primer. |
| 118 | Providing and fixing Granite stone slab thickness 16 - 18 mm mirror polished and machine cut in walls, pillars, steps, shelves, counter, floors etc. laid on 12 mm (Av.) thick base of cement mortar 1:3(1 cement : 3 coarse sand) jointing with white cement mortar 1:2 ( 1 White cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of.Green/Black/Other granite (4) Above 3601 cm2 Slabs |
AI Tender Summary
Tender Timeline
Nov 21, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedDec 12, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 14, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender