}

Tender For Annual Plan-Improvements To Vetinary Hospital .-Project Number: 155/22-23-General Civil Work-1, attingal-Kerala

Local Self Government Department has published Tender For Annual Plan-Improvements To Vetinary Hospital .-Project Number: 155/22-23-General Civil Work-1. Submission Date for this Tender is 26-11-2022. Building Work Tenders in attingal Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

34893950
Tender For Annual Plan-Improvements To Vetinary Hospital .-Project Number: 155/22-23-General Civil Work-1
Open Tender
Indian
Kerala
attingal
26-11-2022

Tender Details

Annual Plan-Improvements To Vetinary Hospital .-Project Number: 155 / 22-23-General Civil Work-1

Key Value

Document Fees
INR 555 /-
EMD
INR 5280.0 /-
Tender Value
INR 2.11 Lakhs /-

BOQ Items

Work Name:Annual Plan-Improvements to Vetinary Hospital .-Project Number: 155/22-23-General Civil Work-1
Sl. No. Item Description
1Sheet roofing
22.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
34.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns
44.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
54.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)
65.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size
75.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
811.20.4:Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Ordinary cement without any pigment
910.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
1010.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
11OD65678/2022-2023: Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.
1213.63.1:Painting with aluminium paint of approved brand and manufacture to give an even shade.Two or more coats on new work
13OD74740/2022-2023:Supplying and fixing 110mm PVC split pipe with 25mm flapspot 1mm thick or nearest available size with 0.90m interwells including welded joints or bolt and iron washers etc complete on eves for rain water gutters
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail